root / pykota / trunk / po / pt / pykota.po @ 2228

# PyKota
#
# PyKota : Print Quotas for CUPS and LPRng
#
# (c) 2003, 2004, 2005 Jerome Alet <alet@librelogiciel.com>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
#
# $Id$
#
#
msgid ""
msgstr ""
"Project-Id-Version: PyKota v1.20\n"
"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
"POT-Creation-Date: 2004-11-25 10:16+0100\n"
"PO-Revision-Date: 2004-01-15 13:02+0100\n"
"Last-Translator: Jerome Alet <alet@librelogiciel.com>\n"
"Language-Team: Portugues <alet@librelogiciel.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"

#, python-format
msgid ""
"autopykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"A tool to automate user account creation and initial balance setting.\n"
"\n"
"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
"\n"
"command line usage :\n"
"\n"
"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
"  OF AN external policy IN pykota.conf\n"
"  \n"
"  autopykota { -i | --initbalance value } \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints autopykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
"                       If the user already exists, actual balance is left\n"
"                       unmodified. If unset, the default value is 0.\n"
"                       \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Banner generator %s exit code is %s"
msgstr ""

msgid "Job contains no data. Printing is denied."
msgstr "Tarefa n�cont�nenhum dado. Impress�negada"

msgid "Job is a duplicate. Printing is denied."
msgstr ""

msgid "Banner won't be printed : maximum number of deny banners reached."
msgstr ""

msgid "Job accounting begins."
msgstr "In�o da contagem da tarefa."

msgid "Job accounting ends."
msgstr "Fim da contagem da tarefa."

msgid "Job size forced to 0 because printing is denied."
msgstr "Tamanho da tarefa zerado porque a impress�foi negada"

#, python-format
msgid "Beware : computed job size (%s) != precomputed job size (%s)"
msgstr ""

msgid ""
"The job size will be trusted anyway according to the 'trustjobsize' directive"
msgstr ""

#, python-format
msgid ""
"The job size will be trusted because it is inferior to the 'trustjobsize' "
"directive's limit %s"
msgstr ""

#, python-format
msgid ""
"The job size will be modified according to the 'trustjobsize' directive : %s"
msgstr ""

#, python-format
msgid "Job size : %i"
msgstr "Tamanho da tarefa : %i"

#, python-format
msgid "Updating user %s's quota on printer %s"
msgstr "Atualizando cota do usu�o %s para a impressora %s"

msgid "Job added to history."
msgstr "Tarefa adicionada ao hist�o"

#, python-format
msgid "File number %s unregistered twice from polling object, ignored."
msgstr ""
"Arquivo n� %s descadastrado duas vezes do objeto de consulta. Ignorado"

#, python-format
msgid "SIGTERM was sent to real backend %s (pid: %s)"
msgstr "Foi enviado um SIGTERM para o backend %s (pid: %s)"

#, python-format
msgid "CUPS backend %s died abnormally."
msgstr "O backend CUPS morreu inesperadamente."

#, python-format
msgid ""
"dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"\n"
"Dumps PyKota database's content.\n"
"\n"
"command line usage :\n"
"\n"
"  dumpykota [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints dumpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
"                       \n"
"                         - history : dumps the jobs history.\n"
"                         - users : dumps users.\n"
"                         - groups : dumps user groups.\n"
"                         - printers : dump printers.\n"
"                         - upquotas : dump user quotas.\n"
"                         - gpquotas : dump user groups quotas.\n"
"                         - payments : dumps user payments.\n"
"                         - pmembers : dumps printer groups members.\n"
"                         - umembers : dumps user groups members.\n"
"                         \n"
"                       NB : the -d | --data command line option   \n"
"                       is MANDATORY.\n"
"  \n"
"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
"                       the format is to dump datas in the csv format (comma\n"
"                       separated values). All data dumped is between double\n"
"                       quotes. Allowed formats are :\n"
"                       \n"
"                         - csv : separate datas with commas\n"
"                         - ssv : separate datas with semicolons\n"
"                         - tsv : separate datas with tabs\n"
"                         - xml : dump data as XML\n"
"                         - cups : dump datas in CUPS' page_log format :\n"
"                                  ONLY AVAILABLE WITH --data history\n"
"                         \n"
"  -o | --output fname  All datas will be dumped to the file instead of\n"
"                       to the standard output. The special '-' filename\n"
"                       is the default value and means stdout.\n"
"                       WARNING : existing files are truncated !\n"
"                       \n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         groupname      Users group's name\n"
"         printername    Printer's name\n"
"         pgroupname     Printers group's name\n"
"         hostname       Client's hostname\n"
"         billingcode    Job's billing code\n"
"         \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"  NB : not all keys are allowed for each data type, so the result may be \n"
"  empty if you use a key not available for a particular data type.\n"
"  \n"
"Examples :\n"
"\n"
"  $ dumpykota --data history --format csv >myfile.csv\n"
"  \n"
"  This dumps the history in a comma separated values file, for possible\n"
"  use in a spreadsheet.\n"
"  \n"
"  $ dumpykota --data users --format xml -o users.xml\n"
"  \n"
"  Dumps all users datas to the users.xml file.\n"
"  \n"
"  $ dumpykota --data history printername=HP2100 username=jerome\n"
"  \n"
"  Dumps the job history for user jerome on printer HP2100 only.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "The -d | --data command line option is mandatory, see help."
msgstr ""

#, python-format
msgid ""
"edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"A Print Quota editor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  edpykota [options] user1 user2 ... userN\n"
"  \n"
"  edpykota [options] group1 group2 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users and/or printers if they don't \n"
"                       exist on the Quota Storage Server.\n"
"                       \n"
"  -d | --delete        Deletes users/groups from the quota storage.\n"
"                       Printers are never deleted.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
"                       for a particular printer. Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point values are allowed.\n"
"                       \n"
"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
"                       when computing the cost of a print job. Positive or \n"
"                       negative floating point values are allowed,\n"
"                       this allows you to do some really creative\n"
"                       things like giving money to an user whenever\n"
"                       he prints. The number of pages in a print job\n"
"                       is not modified by this coefficient, only the\n"
"                       cost of the job for a particular user.\n"
"                       Only users have a coefficient.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
"                              listed, separated by commas. The groups\n"
"                              must already exist in the Quota Storage.\n"
"  \n"
"  -u | --users         Edit users print quotas, this is the default.\n"
"  \n"
"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers. \n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
"                       pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"  \n"
"  -g | --groups        Edit users groups print quotas instead of users.\n"
"                          \n"
"  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
"                       print quotas\n"
"                       \n"
"  -n | --noquota       Doesn't set a quota but only does accounting.\n"
"  \n"
"  -r | --reset         Resets the actual page counter for the user\n"
"                       or group to zero on the specified printers. \n"
"                       The life time page counter is kept unchanged.\n"
"                       \n"
"  -R | --hardreset     Resets the actual and life time page counters\n"
"                       for the user or group to zero on the specified \n"
"                       printers. This is a shortcut for '--used 0'.\n"
"                       \n"
"  -l | --limitby l     Choose if the user/group is limited in "
"printing                     \n"
"                       by its account balance or by its page quota.\n"
"                       The default value is 'quota'. Allowed values\n"
"                       are 'quota' 'balance' 'quota-then-balance' and\n"
"                       'balance-then-quota'.\n"
"                       WARNING : quota-then-balance and balance-then-quota\n"
"                       are not yet implemented.\n"
"                       \n"
"  -b | --balance b     Sets the user's account balance to "
"b.                     \n"
"                       Account balance may be increase or decreased\n"
"                       if b is prefixed with + or -.\n"
"                       WARNING : when decreasing account balance,\n"
"                       the total paid so far by the user is decreased\n"
"                       too.\n"
"                       Groups don't have a real balance, but the\n"
"                       sum of their users' account balance.\n"
"                       \n"
"  -S | --softlimit sl  Sets the quota soft limit to sl "
"pages.                       \n"
"  \n"
"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
"\n"
"  -U | --used usage    Sets the pagecounters for the user to usage pages;\n"
"                       useful for migrating users from a different system\n"
"                       where they have already used some pages. Actual\n"
"                       and Life Time page counters may be increased or "
"decreased\n"
"                       if usage is prefixed with + or -.\n"
"                       WARNING : BOTH page counters are modified in all "
"cases,\n"
"                       so be careful.\n"
"                       NB : if 'usage' equals '0', then the action taken is\n"
"                       the same as if --hardreset was used.\n"
"\n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
"  \n"
"  This will add users john, paul, george and ringo to the quota\n"
"  database, and set their print quotas to the same values than user \n"
"  jerome. User jerome must already exist.\n"
"  User ringo's email address will also be set to 'ringo@example.com'\n"
"  \n"
"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
"  \n"
"  This will set jerome's print quota on the lp printer to a soft limit\n"
"  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
"  printer lp doesn't exist on the Quota Storage Server then nothing is "
"done.\n"
"\n"
"  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
"  \n"
"  Same as above, but if either user jerome or printer lp doesn't exist \n"
"  on the Quota Storage Server they are automatically added. Also\n"
"  user jerome is put into the groups \"coders\" and \"it\" which must\n"
"  already exist in the Quota Storage.\n"
"            \n"
"  $ edpykota -g -S 500 -H 550 financial support            \n"
"  \n"
"  This will set print quota soft limit to 500 pages and hard limit\n"
"  to 550 pages for groups financial and support on all printers.\n"
"  \n"
"  $ edpykota --reset jerome \"jo*\"\n"
"  \n"
"  This will reset jerome's page counter to zero on all printers, as\n"
"  well as every user whose name begins with 'jo'.\n"
"  Their life time page counter on each printer will be kept unchanged.\n"
"  You can also reset the life time page counters by using the\n"
"  --hardreset | -R command line option.\n"
"  \n"
"  $ edpykota --printer hpcolor --noquota jerome\n"
"  \n"
"  This will tell PyKota to not limit jerome when printing on the \n"
"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
"  accounting of the pages he prints will still be kept.\n"
"  Print Quotas for jerome on other printers are unchanged.\n"
"  \n"
"  $ edpykota --limitby balance jerome\n"
"  \n"
"  This will tell PyKota to limit jerome by his account's balance\n"
"  when printing.\n"
"  \n"
"  $ edpykota --balance +10.0 jerome\n"
"  \n"
"  This will increase jerome's account balance by 10.0 (in your\n"
"  own currency). You can decrease the account balance with a\n"
"  dash prefix, and set it to a fixed amount with no prefix.\n"
"  \n"
"  $ edpykota --delete jerome rachel\n"
"  \n"
"  This will completely delete jerome and rachel from the Quota Storage\n"
"  database. All their quotas and jobs will be deleted too.\n"
"  \n"
"  $ edpykota --printer lp --charge 0.1\n"
"  \n"
"  This will set the page price for printer lp to 0.1. Job price\n"
"  will not be changed.\n"
"  \n"
"  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
"  \n"
"  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
"  When printing either on hplj1 or hplj2, print quota will also be \n"
"  checked and accounted for on virtual printers Laser and HP.\n"
"  \n"
"  $ edpykota --overcharge 2.5 poorstudent\n"
"  \n"
"  This will overcharge the poorstudent user by a factor of 2.5.\n"
"  \n"
"  $ edpykota --overcharge -1 jerome\n"
"  \n"
"  User jerome will actually earn money whenever he prints.\n"
"  \n"
"  $ edpykota --overcharge 0 boss\n"
"  \n"
"  User boss can print at will, it won't cost him anything because the\n"
"  cost of each print job will be multiplied by zero before charging\n"
"  his account.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "You're not allowed to use this command."
msgstr ""

#, python-format
msgid "Invalid used value %s."
msgstr ""

#, python-format
msgid "Invalid softlimit value %s."
msgstr "Valor incorrecto para o limite m�mo %s."

#, python-format
msgid "Invalid hardlimit value %s."
msgstr "Valor incorrecto para limite m�mo %s."

#, python-format
msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
msgstr ""
"Limite m�mo %i �enor que o limite m�mo %i, os valores ser�invertidos."

#, python-format
msgid "Invalid overcharge value %s"
msgstr ""

#, python-format
msgid "Invalid balance value %s"
msgstr "Valor de saldo inv�do %s"

#, python-format
msgid "Invalid charge amount value %s"
msgstr "Valor de custo inv�do %s"

#, python-format
msgid "Invalid limitby value %s"
msgstr "Valor inv�do para pol�ca de quota %s"

#, python-format
msgid "Impossible to add printer %s"
msgstr "Foi imposs�l adicionar a impressora %s"

#, python-format
msgid "Invalid printer name %s"
msgstr "Nome de impressora %s inv�do"

#, python-format
msgid "There's no printer matching %s"
msgstr "A impressora %s n�existe"

msgid "You have to pass user or group names on the command line"
msgstr ""
"�Obrigat� a utiliza� de nomes de utilizador ou grupo na linha de "
"comando"

#, python-format
msgid "Prototype object %s not found in Quota Storage."
msgstr "Objecto do prot�o %s n�encontrado na base de dados."

#, python-format
msgid "Prototype %s not found in Quota Storage for printer %s."
msgstr "Prot�o %s n�encontrado na base de dados para a impressora %s."

#, python-format
msgid "Undefined hard limit set to soft limit (%s) on printer %s."
msgstr ""
"Limite m�mo indefinido, foi usado o valor do limite m�mo (%s) para a "
"impressora %s."

#, python-format
msgid "Undefined soft limit set to hard limit (%s) on printer %s."
msgstr ""
"Limite m�mo indefinido, foi usado o valor do limite m�mo (%s) para a "
"impressora %s."

#, python-format
msgid "Invalid email address %s"
msgstr "Endere�email inv�do"

#, python-format
msgid "Unknown group %s"
msgstr ""

#, python-format
msgid "Unknown user %s"
msgstr ""

#, python-format
msgid "Invalid group name %s"
msgstr "O nome do grupo %s �nv�do"

#, python-format
msgid "Invalid user name %s"
msgstr "O nome do utilizador %s �nv�do"

#, python-format
msgid "Quota not found for object %s on printer %s."
msgstr "Cota n�encontrada para o objecto %s da impressora %s."

#, python-format
msgid "Group %s not found in the PyKota Storage."
msgstr "Grupo %s n�encontrado na base de dados."

msgid "incompatible options, see help."
msgstr "Op�s incompat�is, veja a ajuda."

msgid "Software accounting already done in first pass. Ignoring."
msgstr "O contador l�o j�oi aplicado no primeiro passo. Ignorando."

msgid "Hardware accounting already done in first pass. Ignoring."
msgstr "O contador f�co j�oi aplicado no primeiro passo. Ignorando"

msgid "Job size and price now set in history."
msgstr ""

#, python-format
msgid ""
"pkbanner v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"\n"
"Generates banners.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbanner  [options]  [more info]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbanner's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"                       \n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"  \n"
"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
"                       used to save toner. The default value is 0, which\n"
"                       means that no toner saving will be done.\n"
"  \n"
"  -u | --url u         Uses u as an url to be written at the bottom of \n"
"                       the banner page. The default url is :\n"
"                       http://www.librelogiciel.com/software/\n"
"  \n"
"examples :                              \n"
"\n"
"  Using pkbanner directly from the command line is not recommended,\n"
"  excepted for testing purposes. You should use pkbanner in the\n"
"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
"  \n"
"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
"  \n"
"      With such a setting in pykota.conf, all print jobs will be \n"
"      prefixed with an A4 banner with no logo, and text luminosity will\n"
"      be increased by 75%%. The PostScript output will be directly sent\n"
"      to your printer.\n"
"      \n"
"  You'll find more examples in the sample configuration file included    \n"
"  in PyKota.\n"
"      \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "Unknown"
msgstr ""

msgid "Username"
msgstr ""

msgid "More Info"
msgstr ""

msgid "Job"
msgstr ""

msgid "Date"
msgstr "Data"

msgid "Allowed"
msgstr ""

msgid "Denied"
msgstr ""

msgid "Allowed with Warning"
msgstr ""

msgid "Result"
msgstr ""

msgid "Title"
msgstr "T�lo"

msgid "Filename"
msgstr "Nome do arquivo"

#, python-format
msgid "Pages printed so far on %s"
msgstr ""

msgid "Account balance"
msgstr ""

msgid "Soft Limit"
msgstr ""

msgid "Hard Limit"
msgstr ""

msgid "Date Limit"
msgstr ""

msgid "Allowed range is (0..99)"
msgstr ""

#, python-format
msgid "Invalid 'savetoner' option %s : %s"
msgstr ""

#, python-format
msgid "Invalid 'pagesize' option %s, defaulting to A4."
msgstr ""

#, python-format
msgid ""
"pkhint v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
"A tool to give hints on what accounting method is best for each printer.\n"
"\n"
"command line usage :\n"
"\n"
"  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkhint's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
"  \n"
"  Will analyze your printing system to test which accounter\n"
"  is the best for each of the defined printer which\n"
"  name matches one of the parameters.\n"
"  \n"
"  If you don't pass any argument on the command line, all\n"
"  printers will be analyzed.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid DeviceURI : %s"
msgstr "DeviceURI inv�do : %s"

msgid ""
"\n"
"Please wait while pkhint analyzes your printing system's configuration..."
msgstr ""
"\n"
"Por favor, aguarde enquanto pkhint analisa as configura�s de seu sistema "
"de impress�.."

#, python-format
msgid "Unknown device %s for printer %s"
msgstr "Dispositivo %s inv�do para a impressora %s"

msgid ""
"\n"
"Put the following lines into your /etc/pykota/pykota.conf file :\n"
msgstr ""
"\n"
"Pondo as seguintes linhas no arquivo /etc/pykota/pykota.conf : \n"

msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
msgstr "# CUIDADO : se o contador l�o for sugerido, isto n�significa"

msgid "# that hardware accounting wouldn't work, this only means that PyKota"
msgstr ""
"# que o contador l�o poder��funcionar. Isto significa somente que o "
"Pykota"

msgid "# wasn't able to autodetect which hardware accounting method to use."
msgstr ""
"# n�foi capaz de detectar automaticamente o m�do de contagem f�ca a "
"ser utilizado"

#, python-format
msgid ""
"pkmail v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Email gateway for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkmail  [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkmail's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"    \n"
"  This command is meant to be used from your mail server's aliases file,\n"
"  as a pipe. It will then accept commands send to it in email messages,\n"
"  and will send the answer to the command's originator.\n"
"  \n"
"  To use this command, create an email alias in /etc/aliases with\n"
"  the following format :\n"
"  \n"
"    pykotacmd: \"|/usr/bin/pkmail\"\n"
"    \n"
"  Then run the 'newaliases' command to regenerate the aliases database.\n"
"  \n"
"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
"  the command in the subject.\n"
"  \n"
"  List of supported commands :\n"
"  \n"
"        report [username]\n"
"  \n"
"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
"  system user in the 'pykota' system group to ensure this user can\n"
"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
"  that you think at least twice before doing this though.\n"
"  \n"
"  Use at your own risk !\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid ""
"pkprinters v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"A Printers Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds printers if they don't exist on the Quota \n"
"                       Storage Server. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes printers from the quota storage.\n"
"  \n"
"  -D | --description d Adds a textual description to printers.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
"                       Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point and negative values are allowed.\n"
"  \n"
"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
"                       groups pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"                       If the --remove option below is not used, the \n"
"                       default action is to add printers to the specified\n"
"                       printer groups.\n"
"                       \n"
"  -l | --list          List informations about the printer(s) and the\n"
"                       printers groups it is a member of.\n"
"                       \n"
"  -r | --remove        In combination with the --groups option "
"above,                       \n"
"                       remove printers from the specified printers groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkprinters to not modify existing printers.\n"
"  \n"
"  printer1 through printerN can contain wildcards if the --add option \n"
"  is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
"hp8000\n"
"  \n"
"  Will create three printers named hp2100, hp2200 and hp8000.\n"
"  Their price per page will be set at 0.05 unit, and their price\n"
"  per job will be set at 0.1 unit. Units are in your own currency,\n"
"  or whatever you want them to mean.\n"
"  All of their descriptions will be set to the string \"HP Printer\".\n"
"  If any of these printers already exists, it will also be modified \n"
"  unless the -s|--skipexisting command line option is also used.\n"
"            \n"
"  $ pkprinters --delete \"*\"\n"
"  \n"
"  This will completely delete all printers and associated quota "
"information,\n"
"  as well as their job history. USE WITH CARE !\n"
"  \n"
"  $ pkprinters --groups Laser,HP \"hp*\"\n"
"  \n"
"  This will put all printers which name matches \"hp*\" into printers "
"groups \n"
"  Laser and HP, which MUST already exist.\n"
"  \n"
"  $ pkprinters --groups LexMark --remove hp2200\n"
"  \n"
"  This will remove the hp2200 printer from the LexMark printer group.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Printer %s already exists, skipping."
msgstr "Impressora %s j�xiste. Ignorando."

#, python-format
msgid "Printer %s already exists, will be modified."
msgstr "Impressora %s j�xiste. Ser�eita uma modifica�."

msgid "in"
msgstr "em"

msgid "You have to pass printer groups names on the command line"
msgstr ""
"voc�eve passar os nomes dos grupos de impressoras na linha de comando"

msgid "You have to pass printer names on the command line"
msgstr "�Obrigat� a utiliza� de nomes de impressora na linha de comando"

#, python-format
msgid ""
"pykosd v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
"An OSD quota monitor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pykosd [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykosd's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
"                       triplet, for example #FF0000 is 100%% red.\n"
"                       Defaults to 100%% green (#00FF00).\n"
"                       \n"
"  -d | --duration d    Sets the duration of the display in seconds. \n"
"                       Defaults to 3 seconds.\n"
"                       \n"
"  -f | --font f        Sets the font to use for "
"display.                      \n"
"                       Defaults to the Python OSD library's default.\n"
"  \n"
"  -l | --loop n        Sets the number of times the info will be displayed.\n"
"                       Defaults to 0, which means loop forever.\n"
"                       \n"
"  -s | --sleep s       Sets the sleeping duration between two displays \n"
"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
"                       \n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykosd -s 60 --loop 5\n"
"  \n"
"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
"  and will last for 3 seconds (the default) each time. After five\n"
"  iterations, the program will exit.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid duration option %s"
msgstr "Op� %s inv�da para dura�"

#, python-format
msgid "Invalid loop option %s"
msgstr "Op� %s inv�da para loop (la�"

#, python-format
msgid "Invalid sleep option %s"
msgstr "Op� %s inv�da para sleep (sono)"

#, python-format
msgid "Invalid color option %s"
msgstr "Op� %s inv�da para color (cor)"

#, python-format
msgid "User %s doesn't exist in PyKota's database"
msgstr "Usu�o %s n�existe na base de dados do Pykota"

#, python-format
msgid "Pages used on %s : %s"
msgstr "P�nas usadas em %s : %s"

#, python-format
msgid "PyKota Units left : %.2f"
msgstr "Unidades restantes do PyKota : %.2f"

#, python-format
msgid ""
"pykotme v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Gives print quotes to users.\n"
"\n"
"command line usage :\n"
"\n"
"  pykotme  [options]  [files]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykotme's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykotme --printer apple file1.ps file2.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps and file2.ps \n"
"  which would be sent to the apple printer.\n"
"  \n"
"  $ pykotme --printer apple,hplaser <file1.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps as read from\n"
"  standard input, which would be sent to the apple or hplaser\n"
"  printer.\n"
"\n"
"  $ pykotme \n"
"  \n"
"  This will give a quote for a job consisting of what is on standard \n"
"  input. The quote will list the job size, and the price the job\n"
"  would cost on each printer.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Your account balance : %.2f"
msgstr "Saldo da sua conta : %.2f"

#, python-format
msgid "Job size : %i pages"
msgstr "Tamanho do pedido : %i p�nas"

#, python-format
msgid "Cost on printer %s : %.2f"
msgstr "Custo da impressora %s : %.2f"

#, python-format
msgid ""
"repykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"\n"
"Generates print quota reports.\n"
"\n"
"command line usage :\n"
"\n"
"  repykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints repykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Generates a report on users quota, this is \n"
"                       the default.\n"
"  \n"
"  -g | --groups        Generates a report on group quota instead of users.\n"
"  \n"
"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ repykota --printer lp\n"
"  \n"
"  This will print the quota status for all users who use the lp printer.\n"
"\n"
"  $ repykota \n"
"  \n"
"  This will print the quota status for all users on all printers.\n"
"  \n"
"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
"  \n"
"  This will print the quota status for user jerome and all users\n"
"  whose name begins with \"jo\" on all printers which name begins\n"
"  with \"laser\" or ends with \"pson\".\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid ""
"warnpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
"Libres\n"
"\n"
"Sends mail to users over print quota.\n"
"\n"
"command line usage :\n"
"\n"
"  warnpykota  [options]  [names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints warnpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Warns users over their print quota, this is the \n"
"                       default.\n"
"  \n"
"  -g | --groups        Warns users whose groups quota are over limit.\n"
"  \n"
"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ warnpykota --printer lp\n"
"  \n"
"  This will warn all users of the lp printer who have exceeded their\n"
"  print quota.\n"
"\n"
"  $ warnpykota \n"
"  \n"
"  This will warn all users  who have exceeded their print quota on\n"
"  any printer.\n"
"\n"
"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
"  \n"
"  This will warn all users of groups which names begins with \"dev\" and\n"
"  who have exceeded their print quota on any printer which name begins \n"
"  with \"laserjet\"\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "PyKota Data Dumper"
msgstr ""

msgid "Dump"
msgstr ""

msgid "Please click on the above button"
msgstr ""

msgid "Data Type"
msgstr ""

msgid "Output Format"
msgstr ""

msgid "Filter"
msgstr ""

msgid "PyKota Reports"
msgstr "Relat� do Pykota"

msgid "Report"
msgstr "Relat�"

msgid "Printer"
msgstr "Impressora"

msgid "User / Group names mask"
msgstr "M�ara de nomes para Usu�os / Grupos"

msgid "Groups report"
msgstr "Relat� de Grupos"

msgid "History"
msgstr "Hist�o"

msgid "Empty"
msgstr "Vazio"

msgid "Action"
msgstr "A�"

msgid "User"
msgstr "Usu�o"

msgid "Hostname"
msgstr "Nome do computador"

msgid "JobId"
msgstr "Id da Tarefa"

msgid "JobSize"
msgstr "Tamanho da Tarefa"

msgid "JobPrice"
msgstr "Pre�da Tarefa"

msgid "Copies"
msgstr "C�s"

msgid "JobBytes"
msgstr "Tamanho da Tarefa em Bytes"

msgid "PageCounter"
msgstr "Contador de p�nas"

msgid "Options"
msgstr "Op�s"

msgid "MD5Sum"
msgstr ""

msgid "BillingCode"
msgstr ""

msgid "Pages"
msgstr ""

msgid "Previous page"
msgstr "P�na anterior"

msgid "PyKota Quotes"
msgstr ""

msgid "Quote"
msgstr ""

#, python-format
msgid "This file is %i pages long."
msgstr ""

#, python-format
msgid "Unsupported accounter backend %s"
msgstr "Backend de cota %s n�suportado"

#, python-format
msgid "Configuration file %s not found."
msgstr "Ficheiro de configura� %s n�encontrado."

#, python-format
msgid "Option %s not found in section global of %s"
msgstr "A op� %s n�foi encontrada na sec� global de %s"

#, python-format
msgid "Option %s not found in section %s of %s"
msgstr "A op� %s n�foi encontrada na sec� %s de %s"

#, python-format
msgid "Option ldaptls is set, but certificate %s is not readable."
msgstr ""

#, python-format
msgid "Option logger only supports values in %s"
msgstr "A op� logger s�porta valores em %s"

#, python-format
msgid "Invalid accounter %s for printer %s"
msgstr "Contador de p�nas %s inv�do, para a impressora %s"

#, python-format
msgid "Option accounter in section %s only supports values in %s"
msgstr "A op� accounter na sec� %s s�porta valores em %s"

#, python-format
msgid "Option enforcement in section %s only supports values in %s"
msgstr "Op� enforcement (refor� na se� %s s�porta valores em %s"

#, python-format
msgid "Option onaccountererror in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid policy %s for printer %s"
msgstr "Pol�ca %s inv�da para a impressora %s"

#, python-format
msgid "Option policy in section %s only supports values in %s"
msgstr "A op� policy na sec� %s s�porta valores em %s"

#, python-format
msgid "Invalid option mailto %s for printer %s"
msgstr "Op� mailto %s inv�da, para a impressora %s"

#, python-format
msgid "Option mailto in section %s only supports values in %s"
msgstr "a op� mailto na sec� %s s�porta valores em %s"

#, python-format
msgid "Invalid maximal deny banners counter %s"
msgstr ""

#, python-format
msgid "Invalid grace delay %s"
msgstr "Per�o de toler�ia inv�do %s"

#, python-format
msgid "Invalid poor man's threshold %s"
msgstr "Valor 'poor man' %s inv�do"

msgid ""
"Your Print Quota account balance is Low.\n"
"Soon you'll not be allowed to print anymore.\n"
"Please contact the Print Quota Administrator to solve the problem."
msgstr ""
"O seu saldo de impress��aixo.\n"
"Em breve n�poder�mprimir.\n"
"Por favor contacte o administrador do servi�de impress�de forma a "
"resolver o problema."

#, python-format
msgid ""
"You are not allowed to print anymore because\n"
"your Print Quota is exceeded on printer %s."
msgstr ""
"Foi-lhe vedado o acesso ao servi�de impress�j�ue a\n"
"sua quota de impress�foi excedida, na impressora %s."

#, python-format
msgid ""
"You will soon be forbidden to print anymore because\n"
"your Print Quota is almost reached on printer %s."
msgstr ""
"Em breve n�poder�mprimir j�ue a\n"
"sua quota de impress�est�uase a ser atingida, na impressora %s."

#, python-format
msgid "Option accountbanner in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option trustjobsize for printer %s is incorrect"
msgstr ""

msgid "Users"
msgstr ""

msgid "Groups"
msgstr ""

msgid "Printers"
msgstr ""

msgid "Users Print Quotas"
msgstr ""

msgid "Users Groups Print Quotas"
msgstr ""

msgid "History of Payments"
msgstr ""

msgid "Printers Groups Membership"
msgstr ""

msgid "Users Groups Membership"
msgstr ""

msgid "Comma Separated Values"
msgstr ""

msgid "Semicolon Separated Values"
msgstr ""

msgid "Tabulation Separated Values"
msgstr ""

msgid "eXtensible Markup Language"
msgstr ""

msgid "CUPS' page_log"
msgstr ""

#, python-format
msgid "Invalid filter value [%s], see help."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --data command line option, see help."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --format command line option, see help."
msgstr ""

msgid "XML output is disabled because the jaxml module is not available."
msgstr ""

msgid "PyKota data dumper failed : I/O error"
msgstr ""

#, python-format
msgid "Unsupported logging subsystem %s"
msgstr "Sistema de logging %s n�suportado"

#, python-format
msgid "Report for %s quota on printer %s"
msgstr "Relat� de cota %s para a impressora %s"

#, python-format
msgid "Pages grace time: %i days"
msgstr "Per�o de toler�ia : %i d�"

#, python-format
msgid "Price per job: %.3f"
msgstr "Pre�por trabalho: %.3f"

#, python-format
msgid "Price per page: %.3f"
msgstr "Pre�por p�na: %.3f"

msgid ""
"Group          overcharge   used    soft    hard    balance grace         "
"total       paid warn"
msgstr ""

msgid ""
"User           overcharge   used    soft    hard    balance grace         "
"total       paid warn"
msgstr ""

msgid "unknown"
msgstr "Desconhecido"

#, python-format
msgid "Real : %s"
msgstr "Real : %s"

#, python-format
msgid "Total : %9i"
msgstr "Total : %9i"

msgid "N/A"
msgstr ""

#, python-format
msgid "Unsupported reporter backend %s"
msgstr "Backend reporter %s n�suportado"

#, python-format
msgid "Unsupported quota storage backend %s"
msgstr "Base de dados %s n�suportada"

#, python-format
msgid "Strange problem with uid(%s) : %s"
msgstr ""

#, python-format
msgid "Running as user '%s'."
msgstr ""

msgid "No user named 'pykota'. Not dropping priviledges."
msgstr ""

#, python-format
msgid "Impossible to drop priviledges : %s"
msgstr ""

msgid "Priviledges dropped. Now running as user 'pykota'."
msgstr ""

#, python-format
msgid "Impossible to regain priviledges : %s"
msgstr ""

msgid "Regained priviledges. Now running as root."
msgstr ""

#, python-format
msgid "Impossible to connect to SMTP server : %s"
msgstr "N�foi poss�l conectar-se ao servidor SMTP %s"

#, python-format
msgid "Impossible to send mail to %s, error %s : %s"
msgstr "Imposs�l enviar email para  %s, erro %s : %s"

#, python-format
msgid ""
"\n"
"\n"
"Please contact your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""
"\n"
"\n"
"Por favor contacte a seu administrador de sistemas:\n"
"\n"
"\t%s - <%s>\n"

#, python-format
msgid "Unable to match user %s on printer %s, applying default policy (%s)"
msgstr ""
"N�foi poss�l encontrar o utilizador %s para a impressora %s, foi "
"aplicada por omiss�a pol�ca (%s)"

#, python-format
msgid ""
"Unable to find user %s's account balance, applying default policy (%s) for "
"printer %s"
msgstr ""
"N�foi poss�l encontrar o saldo da conta do utilizador %s, foi "
"configurado por omiss�o valor (%s) para a impressora %s"

#, python-format
msgid "User %s will not be charged for printing."
msgstr ""

#, python-format
msgid "Print Quota exceeded for group %s on printer %s"
msgstr "Cota de impress�excedida para o grupo %s na impressora %s"

msgid "Print Quota"
msgstr "Cota de Impress�

msgid "Print Quota Exceeded"
msgstr "Cota de impress�excedida"

#, python-format
msgid "Print Quota low for group %s on printer %s"
msgstr "Cota de impress�baixa para o grupo %s na impresora %s"

#, python-format
msgid "Print Quota exceeded for user %s on printer %s"
msgstr "Cota de impress�excedida para o utilizador %s na impressora %s"

#, python-format
msgid "Print Quota low for user %s on printer %s"
msgstr "Cota de impress�baixa para o utilizador %s na impressora %s"

msgid "Print Quota Low"
msgstr "Cota de impress�baixa"

#, python-format
msgid "Printing system %s, args=%s"
msgstr "Sistema de impress�%s, argumentos=%s"

#, python-format
msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
msgstr ""
"Imposs�l calcular tamanho da tarefa usando analisador gen�o de PDL : %s"

#, python-format
msgid "SIGTERM received, job %s cancelled."
msgstr "SIGTERM recebido, trabalho %s reiniciado."

msgid "Printer hostname undefined, set to 'localhost'"
msgstr ""
"Nome do servidor de impress�n�definido, foi configurado para 'localhost'"

#, python-format
msgid "Printing system unknown, args=%s"
msgstr "Sistema de impress�desconhecido, args=%s"

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying external policy (%"
"s) for printer %s"
msgstr ""
"Impressora %s n�registada no sistema de impress� foi aplicada a pol�ca "
"externa (%s) para a impressora %s"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying external policy (%s) "
"for printer %s"
msgstr ""
"Utilizador %s n�registado no sistema de impress� foi aplicada a pol�ca "
"externa (%s) para a impressora %s"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"external policy (%s) for printer %s"
msgstr ""
"Utilizador %s n�tem cota na impressora %s, foi aplicada a pol�ca externa "
"(%s) para a impressora %s"

#, python-format
msgid ""
"External policy %s for printer %s produced an error. Job rejected. Please "
"check PyKota's configuration files."
msgstr ""
"Pol�ca externa %s para a impressora %s devolveu um erro. Trabalho "
"reiniciado. Por favor verifique os ficheiros de configura� do Pykota."

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying default policy (%s)"
msgstr ""
"Impressora %s n�registada no sistema Pykota, foi aplicada por omiss�a "
"pol�ca (%s)"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying default policy (%s) "
"for printer %s"
msgstr ""
"Utilizador %s n�registrado no sistema PyKota, foi aplicada por omiss�a "
"pol�ca (%s)para a impressora %s"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"default policy (%s)"
msgstr ""
"O utilizador %s n�tem cota na impressora %s, foi aplicada por omiss�a "
"pol�ca (%s)"

#, python-format
msgid ""
"Printer %s still not registered in the PyKota system, job will be rejected"
msgstr ""
"A Impressora %s n�se encontra registada no sistema, o pedido ser�ejeitado"

#, python-format
msgid ""
"User %s still not registered in the PyKota system, job will be rejected on "
"printer %s"
msgstr ""
"O utilizador %s n�se encontra registado no sistema, o pedido para a "
"impressora %sser�ejeitado"

#, python-format
msgid ""
"User %s still doesn't have quota on printer %s in the PyKota system, job "
"will be rejected"
msgstr ""
"O utilizador %s ainda n�tem cota definida na impressora %s, o pedido ser�
"rejeitado"

#, python-format
msgid "A problem occured while reading printer %s's internal page counter."
msgstr ""

#, python-format
msgid "Retrieving printer %s's page counter from database instead."
msgstr ""

#, python-format
msgid ""
"Couldn't retrieve printer %s's internal page counter either before or after "
"printing."
msgstr ""

#, python-format
msgid "Job's size forced to 1 page for printer %s."
msgstr ""

#, python-format
msgid "No previous job in database for printer %s."
msgstr ""

#, python-format
msgid "Inconsistent values for printer %s's internal page counter."
msgstr ""

#, python-format
msgid "Unknown printer address in HARDWARE(%s) for printer %s"
msgstr "Endere�inv�do em HARDWARE(%s) para a impressora %s"

#, python-format
msgid "Launching HARDWARE(%s)..."
msgstr "Tentando identifica� f�ca(%s)..."

#, python-format
msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
msgstr "Sinal SIGTERM enviado para contador f�co %s (pid : %s)"

#, python-format
msgid "Line [%s] skipped in accounter's output. Trying again..."
msgstr ""

#, python-format
msgid "Hardware accounter %s exit code is %s"
msgstr ""

#, python-format
msgid "Unable to query printer %s via HARDWARE(%s)"
msgstr "Foi imposs�l consultar a impressora %s via HARDWARE(%s)"

#, python-format
msgid "Problem during connection to %s:%s : %s"
msgstr ""

#, python-format
msgid "Problem while sending PJL query to %s:%s : %s"
msgstr ""

#, python-format
msgid "Waiting for printer %s to be printing..."
msgstr ""

#, python-format
msgid "Waiting for printer %s's idle status to stabilize..."
msgstr ""

#, python-format
msgid ""
"PJL querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid "Network error while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "SNMP message decoding error for printer %s : %s"
msgstr ""

#, python-format
msgid "Problem encountered while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid ""
"SNMP querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid "Launching SOFTWARE(%s)..."
msgstr "Tentando identifica� l�a (%s)..."

#, python-format
msgid "Unable to compute job size with accounter %s"
msgstr "Foi imposs�l calcular o tamanho do trabalho com o contador %s"

#, python-format
msgid "Problem while waiting for software accounter pid %s to exit : %s"
msgstr "Problema ao aguardar encerramento do contador l�o de pid %s : %s"

#, python-format
msgid "Software accounter %s exit code is %s"
msgstr "C�o de erro para contador l�o %s : %s"

msgid "Totals may be inaccurate if some users are members of several groups."
msgstr ""
"O total pode n�ser exacto, caso os utilizadores sejam membros de v�os "
"grupos."

#, python-format
msgid ""
"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
"double check /etc/pykota/pykota.conf : %s"
msgstr ""
"Base de busca %s parece n�existir, provavelmente por causa de m�
"configura�.Por favor, verifique as configura�s do arquivo /etc/pykota/"
"pykota.conf : %s"

#, python-format
msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
msgstr ""
"A pesquisa de %s(%s) usando o esc� %s(scope=%s) n�devolveu resultados."

#, python-format
msgid "Problem adding LDAP entry (%s, %s)"
msgstr "Ocorreu um problema ao adicionar a entrada LDAP (%s, %s)"

#, python-format
msgid "Problem deleting LDAP entry (%s)"
msgstr "Ocorreu um problema ao apagar a entrada LDAP (%s)"

#, python-format
msgid "Problem modifying LDAP entry (%s, %s)"
msgstr "Ocorreu um problema ao modificar a entrada LDAP (%s, %s)"

#, python-format
msgid ""
"No pykotaAccountBalance object found for user %s. Did you create LDAP "
"entries manually ?"
msgstr ""

#, python-format
msgid ""
"Unable to find an existing objectClass %s entry with %s=%s to attach "
"pykotaAccount objectClass"
msgstr ""
"Imposs�l encontrar uma entrada objectClass %s existente com %s=%s "
"paraanexar objectClass pykotaAccount"

#, python-format
msgid "%s. A new entry will be created instead."
msgstr ""

#, python-format
msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
msgstr ""
"Imposs�l encontrar uma entrada existente para anexar ao objectClass "
"pykotaGroup %s"

msgid "Hidden because of privacy concerns"
msgstr ""

#~ msgid ""
#~ "Group           used    soft    hard    balance grace         total       "
#~ "paid"
#~ msgstr ""
#~ "Grupo           gasto   m�mo  m�mo  saldo   toler�ia    total       "
#~ "pago"

#~ msgid ""
#~ "User            used    soft    hard    balance grace         total       "
#~ "paid"
#~ msgstr ""
#~ "Utilizador      gasto   m�mo  m�mo  saldo   toler�ia    total       "
#~ "pago"