root / pykota / trunk / po / th / pykota.po @ 2344

Revision 2344, 52.8 kB (checked in by jerome, 19 years ago)

Moved the GPL blurb into a single location.
Now uses named parameters in commands' help.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1# PyKota
2#
3# PyKota : Print Quotas for CUPS and LPRng
4#
5# (c) 2003, 2004, 2005 Jerome Alet <alet@librelogiciel.com>
6# This program is free software; you can redistribute it and/or modify
7# it under the terms of the GNU General Public License as published by
8# the Free Software Foundation; either version 2 of the License, or
9# (at your option) any later version.
10#
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14# GNU General Public License for more details.
15#
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
19#
20# $Id$
21#
22# PyKota translation master file.
23# Copyright (c) 2003, 2004, 2005 Conseil Internet & Logiciels Libres
24# Jerome Alet <alet@librelogiciel.com>, 2003, 2004, 2005.
25#
26msgid ""
27msgstr ""
28"Project-Id-Version: PyKota v1.20\n"
29"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
30"POT-Creation-Date: 2004-11-25 10:16+0100\n"
31"PO-Revision-Date: 2004-07-21 15:35:00+0100\n"
32"Last-Translator: Suthep Yonpimai <tomzt@hotmail.com>\n"
33"Language-Team: Thai <tomzt@hotmail.com>\n"
34"MIME-Version: 1.0\n"
35"Content-Type: text/plain; charset=TIS-620\n"
36"Content-Transfer-Encoding: 8bit\n"
37
38#, python-format
39msgid ""
40"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
41"\n"
42"A tool to automate user account creation and initial balance setting.\n"
43"\n"
44"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
45"\n"
46"command line usage :\n"
47"\n"
48"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
49"  OF AN external policy IN pykota.conf\n"
50"  \n"
51"  autopykota { -i | --initbalance value } \n"
52"\n"
53"options :\n"
54"\n"
55"  -v | --version       Prints autopykota's version number then exits.\n"
56"  -h | --help          Prints this message then exits.\n"
57"  \n"
58"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
59"                       If the user already exists, actual balance is left\n"
60"                       unmodified. If unset, the default value is 0.\n"
61msgstr ""
62
63#, python-format
64msgid "Banner generator %s exit code is %s"
65msgstr ""
66
67msgid "Job contains no data. Printing is denied."
68msgstr "������㹧ҹ ���ʸ������
69
70msgid "Job is a duplicate. Printing is denied."
71msgstr ""
72
73msgid "Banner won't be printed : maximum number of deny banners reached."
74msgstr ""
75
76msgid "Job accounting begins."
77msgstr "����ӧҹ�ͧ�Ҫԡ"
78
79msgid "Job accounting ends."
80msgstr "�����ӧҹ�ͧ�Ҫԡ"
81
82msgid "Job size forced to 0 because printing is denied."
83msgstr "��Ҵ�ͧ�ҹ�١��¹�� 0 �����ʸ������
84#, python-format
85msgid "Beware : computed job size (%s) != precomputed job size (%s)"
86msgstr ""
87
88msgid ""
89"The job size will be trusted anyway according to the 'trustjobsize' directive"
90msgstr ""
91
92#, python-format
93msgid ""
94"The job size will be trusted because it is inferior to the 'trustjobsize' "
95"directive's limit %s"
96msgstr ""
97
98#, python-format
99msgid ""
100"The job size will be modified according to the 'trustjobsize' directive : %s"
101msgstr ""
102
103#, python-format
104msgid "Job size : %i"
105msgstr "��Ҵ�ҹ : %i"
106
107#, python-format
108msgid "Updating user %s's quota on printer %s"
109msgstr "��ѧ���������ͧ��� %s ����ͧ����s"
110
111msgid "Job added to history."
112msgstr "���ҹ��������
113
114#, python-format
115msgid "File number %s unregistered twice from polling object, ignored."
116msgstr "������� %s ������ŧ����� 2 ��駨ҡ������� ,���
117
118#, python-format
119msgid "SIGTERM was sent to real backend %s (pid: %s)"
120msgstr "���ҳ SIGTERM �١���ѧ��ͧ�� %s (pid: %s)"
121
122#, python-format
123msgid "CUPS backend %s died abnormally."
124msgstr "CUPS �ͧ��ͧ�� %s ����ش�ӧҹẺ�Դ�á��
125
126#, python-format
127msgid ""
128"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
129"\n"
130"Dumps PyKota database's content.\n"
131"\n"
132"command line usage :\n"
133"\n"
134"  dumpykota [options] [filterexpr]\n"
135"\n"
136"options :\n"
137"\n"
138"  -v | --version       Prints dumpykota's version number then exits.\n"
139"  -h | --help          Prints this message then exits.\n"
140"  \n"
141"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
142"                       \n"
143"                         - history : dumps the jobs history.\n"
144"                         - users : dumps users.\n"
145"                         - groups : dumps user groups.\n"
146"                         - printers : dump printers.\n"
147"                         - upquotas : dump user quotas.\n"
148"                         - gpquotas : dump user groups quotas.\n"
149"                         - payments : dumps user payments.\n"
150"                         - pmembers : dumps printer groups members.\n"
151"                         - umembers : dumps user groups members.\n"
152"                         - billingcodes : dumps billing codes.\n"
153"                         \n"
154"                       NB : the -d | --data command line option   \n"
155"                       is MANDATORY.\n"
156"  \n"
157"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
158"                       the format is to dump datas in the csv format (comma\n"
159"                       separated values). All data dumped is between double\n"
160"                       quotes. Allowed formats are :\n"
161"                       \n"
162"                         - csv : separate datas with commas\n"
163"                         - ssv : separate datas with semicolons\n"
164"                         - tsv : separate datas with tabs\n"
165"                         - xml : dump data as XML\n"
166"                         - cups : dump datas in CUPS' page_log format :\n"
167"                                  ONLY AVAILABLE WITH --data history\n"
168"                         \n"
169"  -o | --output fname  All datas will be dumped to the file instead of\n"
170"                       to the standard output. The special '-' filename\n"
171"                       is the default value and means stdout.\n"
172"                       WARNING : existing files are truncated !\n"
173"\n"
174"  -s | --sum           Summarize the selected datas.\n"
175"                           ONLY AVAILABLE WITH --data history or payments\n"
176"\n"
177"  Use the filter expressions to extract only parts of the \n"
178"  datas. Allowed filters are of the form :\n"
179"                \n"
180"         key=value\n"
181"                         \n"
182"  Allowed keys for now are :  \n"
183"                       \n"
184"         username       User's name\n"
185"         groupname      Users group's name\n"
186"         printername    Printer's name\n"
187"         pgroupname     Printers group's name\n"
188"         hostname       Client's hostname\n"
189"         billingcode    Job's billing code\n"
190"         start          Job's date of printing\n"
191"         end            Job's date of printing\n"
192"         \n"
193"  Contrary to other PyKota management tools, wildcard characters are not \n"
194"  expanded, so you can't use them.\n"
195"  \n"
196"  NB : not all keys are allowed for each data type, so the result may be \n"
197"  empty if you use a key not available for a particular data type.\n"
198"  \n"
199"Examples :\n"
200"\n"
201"  $ dumpykota --data history --format csv >myfile.csv\n"
202"  \n"
203"  This dumps the history in a comma separated values file, for possible\n"
204"  use in a spreadsheet.\n"
205"  \n"
206"  $ dumpykota --data users --format xml -o users.xml\n"
207"  \n"
208"  Dumps all users datas to the users.xml file.\n"
209"  \n"
210"  $ dumpykota --data history printername=HP2100 username=jerome\n"
211"  \n"
212"  Dumps the job history for user jerome on printer HP2100 only.\n"
213"  \n"
214"  $ dumpykota --data history start=200503 end=20050730234615\n"
215"  \n"
216"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
217"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
218msgstr ""
219
220msgid "The -d | --data command line option is mandatory, see help."
221msgstr ""
222
223#, python-format
224msgid ""
225"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
226"\n"
227"A Print Quota editor for PyKota.\n"
228"\n"
229"command line usage :\n"
230"\n"
231"  edpykota [options] user1 user2 ... userN\n"
232"  \n"
233"  edpykota [options] group1 group2 ... groupN\n"
234"\n"
235"options :\n"
236"\n"
237"  -v | --version       Prints edpykota's version number then exits.\n"
238"  -h | --help          Prints this message then exits.\n"
239"  \n"
240"  -a | --add           Adds users and/or printers if they don't \n"
241"                       exist on the Quota Storage Server.\n"
242"                       \n"
243"  -d | --delete        Deletes users/groups from the quota storage.\n"
244"                       Printers are never deleted.\n"
245"                       \n"
246"  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
247"                       for a particular printer. Job price is optional.\n"
248"                       If both are to be set, separate them with a comma.\n"
249"                       Floating point values are allowed.\n"
250"                       \n"
251"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
252"                       when computing the cost of a print job. Positive or \n"
253"                       negative floating point values are allowed,\n"
254"                       this allows you to do some really creative\n"
255"                       things like giving money to an user whenever\n"
256"                       he prints. The number of pages in a print job\n"
257"                       is not modified by this coefficient, only the\n"
258"                       cost of the job for a particular user.\n"
259"                       Only users have a coefficient.\n"
260"  \n"
261"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
262"                              listed, separated by commas. The groups\n"
263"                              must already exist in the Quota Storage.\n"
264"  \n"
265"  -u | --users         Edit users print quotas, this is the default.\n"
266"  \n"
267"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
268"                       use wildcards characters to select only\n"
269"                       some printers. The default value is *, meaning\n"
270"                       all printers. \n"
271"                       You can specify several names or wildcards, \n"
272"                       by separating them with commas.\n"
273"  \n"
274"  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
275"                       pg1, pg2, etc... which must already exist.\n"
276"                       A printer group is just like a normal printer,\n"
277"                       only that it is usually unknown from the printing\n"
278"                       system. Create printer groups exactly the same\n"
279"                       way that you create printers, then add other \n"
280"                       printers to them with this option.\n"
281"                       Accounting is done on a printer and on all\n"
282"                       the printer groups it belongs to, quota checking\n"
283"                       is done on a printer and on all the printer groups\n"
284"                       it belongs to.\n"
285"  \n"
286"  -g | --groups        Edit users groups print quotas instead of users.\n"
287"                          \n"
288"  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
289"                       print quotas\n"
290"                       \n"
291"  -n | --noquota       Doesn't set a quota but only does accounting.\n"
292"  \n"
293"  -r | --reset         Resets the actual page counter for the user\n"
294"                       or group to zero on the specified printers. \n"
295"                       The life time page counter is kept unchanged.\n"
296"                       \n"
297"  -R | --hardreset     Resets the actual and life time page counters\n"
298"                       for the user or group to zero on the specified \n"
299"                       printers. This is a shortcut for '--used 0'.\n"
300"                       \n"
301"  -l | --limitby l     Choose if the user/group is limited in "
302"printing                     \n"
303"                       by its account balance or by its page quota.\n"
304"                       The default value is 'quota'. Allowed values\n"
305"                       are 'quota' 'balance' 'quota-then-balance' and\n"
306"                       'balance-then-quota'.\n"
307"                       WARNING : quota-then-balance and balance-then-quota\n"
308"                       are not yet implemented.\n"
309"                       \n"
310"  -b | --balance b     Sets the user's account balance to "
311"b.                     \n"
312"                       Account balance may be increase or decreased\n"
313"                       if b is prefixed with + or -.\n"
314"                       WARNING : when decreasing account balance,\n"
315"                       the total paid so far by the user is decreased\n"
316"                       too.\n"
317"                       Groups don't have a real balance, but the\n"
318"                       sum of their users' account balance.\n"
319"                       \n"
320"  -S | --softlimit sl  Sets the quota soft limit to sl "
321"pages.                       \n"
322"  \n"
323"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
324"\n"
325"  -U | --used usage    Sets the pagecounters for the user to usage pages;\n"
326"                       useful for migrating users from a different system\n"
327"                       where they have already used some pages. Actual\n"
328"                       and Life Time page counters may be increased or "
329"decreased\n"
330"                       if usage is prefixed with + or -.\n"
331"                       WARNING : BOTH page counters are modified in all "
332"cases,\n"
333"                       so be careful.\n"
334"                       NB : if 'usage' equals '0', then the action taken is\n"
335"                       the same as if --hardreset was used.\n"
336"\n"
337"  user1 through userN and group1 through groupN can use wildcards\n"
338"  if the --add option is not set.\n"
339"  \n"
340"examples :                              \n"
341"\n"
342"  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
343"  \n"
344"  This will add users john, paul, george and ringo to the quota\n"
345"  database, and set their print quotas to the same values than user \n"
346"  jerome. User jerome must already exist.\n"
347"  User ringo's email address will also be set to 'ringo@example.com'\n"
348"  \n"
349"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
350"  \n"
351"  This will set jerome's print quota on the lp printer to a soft limit\n"
352"  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
353"  printer lp doesn't exist on the Quota Storage Server then nothing is "
354"done.\n"
355"\n"
356"  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
357"  \n"
358"  Same as above, but if either user jerome or printer lp doesn't exist \n"
359"  on the Quota Storage Server they are automatically added. Also\n"
360"  user jerome is put into the groups \"coders\" and \"it\" which must\n"
361"  already exist in the Quota Storage.\n"
362"            \n"
363"  $ edpykota -g -S 500 -H 550 financial support            \n"
364"  \n"
365"  This will set print quota soft limit to 500 pages and hard limit\n"
366"  to 550 pages for groups financial and support on all printers.\n"
367"  \n"
368"  $ edpykota --reset jerome \"jo*\"\n"
369"  \n"
370"  This will reset jerome's page counter to zero on all printers, as\n"
371"  well as every user whose name begins with 'jo'.\n"
372"  Their life time page counter on each printer will be kept unchanged.\n"
373"  You can also reset the life time page counters by using the\n"
374"  --hardreset | -R command line option.\n"
375"  \n"
376"  $ edpykota --printer hpcolor --noquota jerome\n"
377"  \n"
378"  This will tell PyKota to not limit jerome when printing on the \n"
379"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
380"  accounting of the pages he prints will still be kept.\n"
381"  Print Quotas for jerome on other printers are unchanged.\n"
382"  \n"
383"  $ edpykota --limitby balance jerome\n"
384"  \n"
385"  This will tell PyKota to limit jerome by his account's balance\n"
386"  when printing.\n"
387"  \n"
388"  $ edpykota --balance +10.0 jerome\n"
389"  \n"
390"  This will increase jerome's account balance by 10.0 (in your\n"
391"  own currency). You can decrease the account balance with a\n"
392"  dash prefix, and set it to a fixed amount with no prefix.\n"
393"  \n"
394"  $ edpykota --delete jerome rachel\n"
395"  \n"
396"  This will completely delete jerome and rachel from the Quota Storage\n"
397"  database. All their quotas and jobs will be deleted too.\n"
398"  \n"
399"  $ edpykota --printer lp --charge 0.1\n"
400"  \n"
401"  This will set the page price for printer lp to 0.1. Job price\n"
402"  will not be changed.\n"
403"  \n"
404"  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
405"  \n"
406"  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
407"  When printing either on hplj1 or hplj2, print quota will also be \n"
408"  checked and accounted for on virtual printers Laser and HP.\n"
409"  \n"
410"  $ edpykota --overcharge 2.5 poorstudent\n"
411"  \n"
412"  This will overcharge the poorstudent user by a factor of 2.5.\n"
413"  \n"
414"  $ edpykota --overcharge -1 jerome\n"
415"  \n"
416"  User jerome will actually earn money whenever he prints.\n"
417"  \n"
418"  $ edpykota --overcharge 0 boss\n"
419"  \n"
420"  User boss can print at will, it won't cost him anything because the\n"
421"  cost of each print job will be multiplied by zero before charging\n"
422"  his account.\n"
423msgstr ""
424
425msgid "You're not allowed to use this command."
426msgstr ""
427
428#, python-format
429msgid "Invalid used value %s."
430msgstr ""
431
432#, python-format
433msgid "Invalid softlimit value %s."
434msgstr "��%s �ͧ softlimit ��١��"
435
436#, python-format
437msgid "Invalid hardlimit value %s."
438msgstr "��%s �ͧ hardlimit��١�� "
439
440#, python-format
441msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
442msgstr "��Hard limit %i �������soft limit %i ������"
443
444#, python-format
445msgid "Invalid overcharge value %s"
446msgstr ""
447
448#, python-format
449msgid "Invalid balance value %s"
450msgstr "����������١�� %s"
451
452#, python-format
453msgid "Invalid charge amount value %s"
454msgstr "����������١�� %s"
455
456#, python-format
457msgid "Invalid limitby value %s"
458msgstr "����ӡѴ %s ��١��"
459
460#, python-format
461msgid "Impossible to add printer %s"
462msgstr "���ö�ӡ�����������
463#, python-format
464msgid "Invalid printer name %s"
465msgstr "����������s ��١��"
466
467#, python-format
468msgid "There's no printer matching %s"
469msgstr "�����ͧ����s ����ҹ�"
470
471msgid "You have to pass user or group names on the command line"
472msgstr "�س���������� �����������������
473#, python-format
474msgid "Prototype object %s not found in Quota Storage."
475msgstr "������ص��� %s ���������"
476
477#, python-format
478msgid "Prototype %s not found in Quota Storage for printer %s."
479msgstr "������� %s �����������Ѻ��ͧ����s "
480
481#, python-format
482msgid "Undefined hard limit set to soft limit (%s) on printer %s."
483msgstr "���ӡ������hard limit �֧ soft limit (%s) ����ͧ����s"
484
485#, python-format
486msgid "Undefined soft limit set to hard limit (%s) on printer %s."
487msgstr "���ӡ������soft limit �֧ hard limit (%s) ����ͧ����s"
488
489#, python-format
490msgid "Invalid email address %s"
491msgstr "email address %s ��١��"
492
493#, python-format
494msgid "Unknown group %s"
495msgstr ""
496
497#, python-format
498msgid "Unknown user %s"
499msgstr ""
500
501#, python-format
502msgid "Invalid group name %s"
503msgstr "��͡���� %s ��١��"
504
505#, python-format
506msgid "Invalid user name %s"
507msgstr "��ͼ�� %s ��١��"
508
509#, python-format
510msgid "Quota not found for object %s on printer %s."
511msgstr "��������������Ѻ %s ����ͧ����s"
512
513#, python-format
514msgid "Group %s not found in the PyKota Storage."
515msgstr "�������� %s ��������ͧ PyKota"
516
517msgid "incompatible options, see help."
518msgstr "���͡����, ���Ҵ٨ҡ�ǹ����"
519
520msgid "Software accounting already done in first pass. Ignoring."
521msgstr "����Ϳ�������ѭ����ԡ����ǹ� ���
522
523msgid "Hardware accounting already done in first pass. Ignoring."
524msgstr "�����������ѭ����ԡ����ǹ� ���
525
526msgid "Job size and price now set in history."
527msgstr ""
528
529#, python-format
530msgid ""
531"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
532"\n"
533"Generates banners.\n"
534"\n"
535"command line usage :\n"
536"\n"
537"  pkbanner  [options]  [more info]\n"
538"\n"
539"options :\n"
540"\n"
541"  -v | --version       Prints pkbanner's version number then exits.\n"
542"  -h | --help          Prints this message then exits.\n"
543"  \n"
544"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
545"                       be drawn at the center top of the page. The default\n"
546"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
547"                       \n"
548"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
549"                       page sizes are recognized, like 'A4' or 'Letter'\n"
550"                       to name a few. The default size is A4.\n"
551"  \n"
552"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
553"                       used to save toner. The default value is 0, which\n"
554"                       means that no toner saving will be done.\n"
555"  \n"
556"  -u | --url u         Uses u as an url to be written at the bottom of \n"
557"                       the banner page. The default url is :\n"
558"                       http://www.librelogiciel.com/software/\n"
559"  \n"
560"examples :                              \n"
561"\n"
562"  Using pkbanner directly from the command line is not recommended,\n"
563"  excepted for testing purposes. You should use pkbanner in the\n"
564"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
565"  \n"
566"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
567"  \n"
568"      With such a setting in pykota.conf, all print jobs will be \n"
569"      prefixed with an A4 banner with no logo, and text luminosity will\n"
570"      be increased by 75%%. The PostScript output will be directly sent\n"
571"      to your printer.\n"
572"      \n"
573"  You'll find more examples in the sample configuration file included    \n"
574"  in PyKota.\n"
575msgstr ""
576
577msgid "Unknown"
578msgstr ""
579
580msgid "Username"
581msgstr ""
582
583msgid "More Info"
584msgstr ""
585
586msgid "Job"
587msgstr ""
588
589msgid "Date"
590msgstr "����"
591
592msgid "Allowed"
593msgstr ""
594
595msgid "Denied"
596msgstr ""
597
598msgid "Allowed with Warning"
599msgstr ""
600
601msgid "Result"
602msgstr ""
603
604msgid "Title"
605msgstr "�����"
606
607msgid "Filename"
608msgstr "�������"
609
610#, python-format
611msgid "Pages printed so far on %s"
612msgstr ""
613
614msgid "Account balance"
615msgstr ""
616
617msgid "Soft Limit"
618msgstr ""
619
620msgid "Hard Limit"
621msgstr ""
622
623msgid "Date Limit"
624msgstr ""
625
626msgid "Allowed range is (0..99)"
627msgstr ""
628
629#, python-format
630msgid "Invalid 'savetoner' option %s : %s"
631msgstr ""
632
633#, python-format
634msgid "Invalid 'pagesize' option %s, defaulting to A4."
635msgstr ""
636
637#, python-format
638msgid ""
639"pkhint v%(__version__)s (c) %(__years__)s %(__author__)s\n"
640"\n"
641"A tool to give hints on what accounting method is best for each printer.\n"
642"\n"
643"command line usage :\n"
644"\n"
645"  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
646"\n"
647"options :\n"
648"\n"
649"  -v | --version       Prints pkhint's version number then exits.\n"
650"  -h | --help          Prints this message then exits.\n"
651"  \n"
652"examples :                              \n"
653"\n"
654"  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
655"  \n"
656"  Will analyze your printing system to test which accounter\n"
657"  is the best for each of the defined printer which\n"
658"  name matches one of the parameters.\n"
659"  \n"
660"  If you don't pass any argument on the command line, all\n"
661"  printers will be analyzed.\n"
662msgstr ""
663
664#, python-format
665msgid "Invalid DeviceURI : %s"
666msgstr "��DeviceURI : %s ��١��"
667
668msgid ""
669"\n"
670"Please wait while pkhint analyzes your printing system's configuration..."
671msgstr ""
672"\n"
673"�����pkhint �зӡ������������к����������..."
674
675#, python-format
676msgid "Unknown device %s for printer %s"
677msgstr "�������ó�s ��Ѻ��ͧ����s"
678
679msgid ""
680"\n"
681"Put the following lines into your /etc/pykota/pykota.conf file :\n"
682msgstr ""
683"\n"
684"��������Ѵ�����ŧ���/etc/pykota/pykota.conf file :\n"
685
686msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
687msgstr "# ����� : ��Ϳ�������Ҫԡ����й�
688
689msgid "# that hardware accounting wouldn't work, this only means that PyKota"
690msgstr "# ��������Ҫԡ���ö�ӧҹ�, �ѭ�������੾��Ѻ PyKota"
691
692msgid "# wasn't able to autodetect which hardware accounting method to use."
693msgstr "# ��������������Ҫԡ����ö��"
694
695#, python-format
696msgid ""
697"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
698"\n"
699"Email gateway for PyKota.\n"
700"\n"
701"command line usage :\n"
702"\n"
703"  pkmail  [options]\n"
704"\n"
705"options :\n"
706"\n"
707"  -v | --version       Prints pkmail's version number then exits.\n"
708"  -h | --help          Prints this message then exits.\n"
709"  \n"
710"    \n"
711"  This command is meant to be used from your mail server's aliases file,\n"
712"  as a pipe. It will then accept commands send to it in email messages,\n"
713"  and will send the answer to the command's originator.\n"
714"  \n"
715"  To use this command, create an email alias in /etc/aliases with\n"
716"  the following format :\n"
717"  \n"
718"    pykotacmd: \"|/usr/bin/pkmail\"\n"
719"    \n"
720"  Then run the 'newaliases' command to regenerate the aliases database.\n"
721"  \n"
722"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
723"  the command in the subject.\n"
724"  \n"
725"  List of supported commands :\n"
726"  \n"
727"        report [username]\n"
728"  \n"
729"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
730"  system user in the 'pykota' system group to ensure this user can\n"
731"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
732"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
733"  that you think at least twice before doing this though.\n"
734"  \n"
735"  Use at your own risk !\n"
736msgstr ""
737
738#, python-format
739msgid ""
740"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
741"\n"
742"A Printers Manager for PyKota.\n"
743"\n"
744"command line usage :\n"
745"\n"
746"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
747"\n"
748"options :\n"
749"\n"
750"  -v | --version       Prints pkprinters's version number then exits.\n"
751"  -h | --help          Prints this message then exits.\n"
752"  \n"
753"  -a | --add           Adds printers if they don't exist on the Quota \n"
754"                       Storage Server. If they exist, they are modified\n"
755"                       unless -s|--skipexisting is also used.\n"
756"                       \n"
757"  -d | --delete        Deletes printers from the quota storage.\n"
758"  \n"
759"  -D | --description d Adds a textual description to printers.\n"
760"                       \n"
761"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
762"                       Job price is optional.\n"
763"                       If both are to be set, separate them with a comma.\n"
764"                       Floating point and negative values are allowed.\n"
765"  \n"
766"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
767"                       groups pg1, pg2, etc... which must already exist.\n"
768"                       A printer group is just like a normal printer,\n"
769"                       only that it is usually unknown from the printing\n"
770"                       system. Create printer groups exactly the same\n"
771"                       way that you create printers, then add other \n"
772"                       printers to them with this option.\n"
773"                       Accounting is done on a printer and on all\n"
774"                       the printer groups it belongs to, quota checking\n"
775"                       is done on a printer and on all the printer groups\n"
776"                       it belongs to.\n"
777"                       If the --remove option below is not used, the \n"
778"                       default action is to add printers to the specified\n"
779"                       printer groups.\n"
780"                       \n"
781"  -l | --list          List informations about the printer(s) and the\n"
782"                       printers groups it is a member of.\n"
783"                       \n"
784"  -r | --remove        In combination with the --groups option "
785"above,                       \n"
786"                       remove printers from the specified printers groups.\n"
787"                       \n"
788"  -s | --skipexisting  In combination with the --add option above, tells\n"
789"                       pkprinters to not modify existing printers.\n"
790"  \n"
791"  printer1 through printerN can contain wildcards if the --add option \n"
792"  is not set.\n"
793"  \n"
794"examples :                              \n"
795"\n"
796"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
797"hp8000\n"
798"  \n"
799"  Will create three printers named hp2100, hp2200 and hp8000.\n"
800"  Their price per page will be set at 0.05 unit, and their price\n"
801"  per job will be set at 0.1 unit. Units are in your own currency,\n"
802"  or whatever you want them to mean.\n"
803"  All of their descriptions will be set to the string \"HP Printer\".\n"
804"  If any of these printers already exists, it will also be modified \n"
805"  unless the -s|--skipexisting command line option is also used.\n"
806"            \n"
807"  $ pkprinters --delete \"*\"\n"
808"  \n"
809"  This will completely delete all printers and associated quota "
810"information,\n"
811"  as well as their job history. USE WITH CARE !\n"
812"  \n"
813"  $ pkprinters --groups Laser,HP \"hp*\"\n"
814"  \n"
815"  This will put all printers which name matches \"hp*\" into printers "
816"groups \n"
817"  Laser and HP, which MUST already exist.\n"
818"  \n"
819"  $ pkprinters --groups LexMark --remove hp2200\n"
820"  \n"
821"  This will remove the hp2200 printer from the LexMark printer group.\n"
822msgstr ""
823
824#, python-format
825msgid "Printer %s already exists, skipping."
826msgstr "��ͧ����s ��١�Դ����� ���
827
828#, python-format
829msgid "Printer %s already exists, will be modified."
830msgstr "��ͧ����s ��١�Դ����� �ӡ������"
831
832msgid "in"
833msgstr "�
834
835msgid "You have to pass printer groups names on the command line"
836msgstr "�س�����͡��������캹��������
837msgid "You have to pass printer names on the command line"
838msgstr "�س������������캹��������
839#, python-format
840msgid ""
841"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
842"\n"
843"An OSD quota monitor for PyKota.\n"
844"\n"
845"command line usage :\n"
846"\n"
847"  pykosd [options]\n"
848"\n"
849"options :\n"
850"\n"
851"  -v | --version       Prints pykosd's version number then exits.\n"
852"  -h | --help          Prints this message then exits.\n"
853"  \n"
854"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
855"                       triplet, for example #FF0000 is 100%% red.\n"
856"                       Defaults to 100%% green (#00FF00).\n"
857"                       \n"
858"  -d | --duration d    Sets the duration of the display in seconds. \n"
859"                       Defaults to 3 seconds.\n"
860"                       \n"
861"  -f | --font f        Sets the font to use for "
862"display.                      \n"
863"                       Defaults to the Python OSD library's default.\n"
864"  \n"
865"  -l | --loop n        Sets the number of times the info will be displayed.\n"
866"                       Defaults to 0, which means loop forever.\n"
867"                       \n"
868"  -s | --sleep s       Sets the sleeping duration between two displays \n"
869"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
870"                       \n"
871"  \n"
872"examples :                              \n"
873"\n"
874"  $ pykosd -s 60 --loop 5\n"
875"  \n"
876"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
877"  and will last for 3 seconds (the default) each time. After five\n"
878"  iterations, the program will exit.\n"
879msgstr ""
880
881#, python-format
882msgid "Invalid duration option %s"
883msgstr "������������١��"
884
885#, python-format
886msgid "Invalid loop option %s"
887msgstr "�ҵ������ӫ���١��"
888
889#, python-format
890msgid "Invalid sleep option %s"
891msgstr "���������ѡ��ͧ��١��"
892
893#, python-format
894msgid "Invalid color option %s"
895msgstr "����������١��"
896
897#, python-format
898msgid "User %s doesn't exist in PyKota's database"
899msgstr "����ͼ�� %s 㹰ҹ����ͧ PyKota"
900
901#, python-format
902msgid "Pages used on %s : %s"
903msgstr "�ӹǹ˹���仺� %s : %s"
904
905#, python-format
906msgid "PyKota Units left : %.2f"
907msgstr "˹������ͧ PyKota : %.2f"
908
909#, python-format
910msgid ""
911"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
912"\n"
913"Gives print quotes to users.\n"
914"\n"
915"command line usage :\n"
916"\n"
917"  pykotme  [options]  [files]\n"
918"\n"
919"options :\n"
920"\n"
921"  -v | --version       Prints pykotme's version number then exits.\n"
922"  -h | --help          Prints this message then exits.\n"
923"  \n"
924"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
925"                       use wildcards characters to select only\n"
926"                       some printers. The default value is *, meaning\n"
927"                       all printers.\n"
928"                       You can specify several names or wildcards, \n"
929"                       by separating them with commas.\n"
930"  \n"
931"examples :                              \n"
932"\n"
933"  $ pykotme --printer apple file1.ps file2.ps\n"
934"  \n"
935"  This will give a print quote to the current user. The quote will show\n"
936"  the price and size of a job consisting in file1.ps and file2.ps \n"
937"  which would be sent to the apple printer.\n"
938"  \n"
939"  $ pykotme --printer apple,hplaser <file1.ps\n"
940"  \n"
941"  This will give a print quote to the current user. The quote will show\n"
942"  the price and size of a job consisting in file1.ps as read from\n"
943"  standard input, which would be sent to the apple or hplaser\n"
944"  printer.\n"
945"\n"
946"  $ pykotme \n"
947"  \n"
948"  This will give a quote for a job consisting of what is on standard \n"
949"  input. The quote will list the job size, and the price the job\n"
950"  would cost on each printer.\n"
951msgstr ""
952
953#, python-format
954msgid "Your account balance : %.2f"
955msgstr "���������ͧ�س : %.2f"
956
957#, python-format
958msgid "Job size : %i pages"
959msgstr "�ӹǹ�ҹ : %i ˹�
960
961#, python-format
962msgid "Cost on printer %s : %.2f"
963msgstr "��ҡ��������ͧ����s : %.2f"
964
965#, python-format
966msgid ""
967"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
968"\n"
969"Generates print quota reports.\n"
970"\n"
971"command line usage :\n"
972"\n"
973"  repykota [options] \n"
974"\n"
975"options :\n"
976"\n"
977"  -v | --version       Prints repykota's version number then exits.\n"
978"  -h | --help          Prints this message then exits.\n"
979"  \n"
980"  -u | --users         Generates a report on users quota, this is \n"
981"                       the default.\n"
982"  \n"
983"  -g | --groups        Generates a report on group quota instead of users.\n"
984"  \n"
985"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
986"                       use wildcards characters to select only\n"
987"                       some printers. The default value is *, meaning\n"
988"                       all printers.\n"
989"                       You can specify several names or wildcards, \n"
990"                       by separating them with commas.\n"
991"  \n"
992"examples :                              \n"
993"\n"
994"  $ repykota --printer lp\n"
995"  \n"
996"  This will print the quota status for all users who use the lp printer.\n"
997"\n"
998"  $ repykota \n"
999"  \n"
1000"  This will print the quota status for all users on all printers.\n"
1001"  \n"
1002"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
1003"  \n"
1004"  This will print the quota status for user jerome and all users\n"
1005"  whose name begins with \"jo\" on all printers which name begins\n"
1006"  with \"laser\" or ends with \"pson\".\n"
1007"  \n"
1008"  If launched by an user who is not a PyKota administrator, additionnal\n"
1009"  arguments representing users or groups names are ignored, and only the\n"
1010"  current user/group is reported.\n"
1011msgstr ""
1012
1013#, python-format
1014msgid ""
1015"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1016"\n"
1017"Sends mail to users over print quota.\n"
1018"\n"
1019"command line usage :\n"
1020"\n"
1021"  warnpykota  [options]  [names]\n"
1022"\n"
1023"options :\n"
1024"\n"
1025"  -v | --version       Prints warnpykota's version number then exits.\n"
1026"  -h | --help          Prints this message then exits.\n"
1027"  \n"
1028"  -u | --users         Warns users over their print quota, this is the \n"
1029"                       default.\n"
1030"  \n"
1031"  -g | --groups        Warns users whose groups quota are over limit.\n"
1032"  \n"
1033"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
1034"                       use wildcards characters to select only\n"
1035"                       some printers. The default value is *, meaning\n"
1036"                       all printers.\n"
1037"                       You can specify several names or wildcards, \n"
1038"                       by separating them with commas.\n"
1039"  \n"
1040"examples :                              \n"
1041"\n"
1042"  $ warnpykota --printer lp\n"
1043"  \n"
1044"  This will warn all users of the lp printer who have exceeded their\n"
1045"  print quota.\n"
1046"\n"
1047"  $ warnpykota \n"
1048"  \n"
1049"  This will warn all users  who have exceeded their print quota on\n"
1050"  any printer.\n"
1051"\n"
1052"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
1053"  \n"
1054"  This will warn all users of groups which names begins with \"dev\" and\n"
1055"  who have exceeded their print quota on any printer which name begins \n"
1056"  with \"laserjet\"\n"
1057"  \n"
1058"  If launched by an user who is not a PyKota administrator, additionnal\n"
1059"  arguments representing users or groups names are ignored, and only the\n"
1060"  current user/group is reported.\n"
1061msgstr ""
1062
1063msgid "PyKota Data Dumper"
1064msgstr ""
1065
1066msgid "Dump"
1067msgstr ""
1068
1069msgid "Please click on the above button"
1070msgstr ""
1071
1072msgid "Data Type"
1073msgstr ""
1074
1075msgid "Output Format"
1076msgstr ""
1077
1078msgid "Filter"
1079msgstr ""
1080
1081msgid "PyKota Reports"
1082msgstr "�§ҹ PyKota"
1083
1084msgid "Report"
1085msgstr "�§ҹ"
1086
1087msgid "Printer"
1088msgstr "��ͧ����
1089msgid "User / Group names mask"
1090msgstr "�� ��ͼ��/��͡����"
1091
1092msgid "Groups report"
1093msgstr "�§ҹ���
1094
1095msgid "History"
1096msgstr "�����
1097
1098msgid "Empty"
1099msgstr "�ҧ"
1100
1101msgid "Action"
1102msgstr "�Ԩ���
1103
1104msgid "User"
1105msgstr "���"
1106
1107msgid "Hostname"
1108msgstr "������"
1109
1110msgid "JobId"
1111msgstr "����ҹ"
1112
1113msgid "JobSize"
1114msgstr "��Ҵ�ҹ"
1115
1116msgid "JobPrice"
1117msgstr "��ҧҹ"
1118
1119msgid "Copies"
1120msgstr "�ӹǹ��"
1121
1122msgid "JobBytes"
1123msgstr "�����Ҵ�ҹ"
1124
1125msgid "PageCounter"
1126msgstr "�ӹǹ˹�
1127
1128msgid "Options"
1129msgstr "���͡"
1130
1131msgid "MD5Sum"
1132msgstr ""
1133
1134msgid "BillingCode"
1135msgstr ""
1136
1137msgid "Pages"
1138msgstr ""
1139
1140msgid "Previous page"
1141msgstr "˹����
1142
1143msgid "PyKota Quotes"
1144msgstr ""
1145
1146msgid "Quote"
1147msgstr ""
1148
1149#, python-format
1150msgid "This file is %i pages long."
1151msgstr ""
1152
1153#, python-format
1154msgid "Unsupported accounter backend %s"
1155msgstr "����ѭ����ԡ�ʹѺʹع���ӧҹ %s"
1156
1157#, python-format
1158msgid "Configuration file %s not found."
1159msgstr "���! ����͹�ԡ��s"
1160
1161#, python-format
1162msgid "Option %s not found in section global of %s"
1163msgstr "������͡ %s ��������ͧ %s "
1164
1165#, python-format
1166msgid "Option %s not found in section %s of %s"
1167msgstr "������͡ %s ��� %s �ͧ %s"
1168
1169#, python-format
1170msgid "Option ldaptls is set, but certificate %s is not readable."
1171msgstr ""
1172
1173#, python-format
1174msgid "Option logger only supports values in %s"
1175msgstr "���͡�ѹ�֡���ӧҹʹѺʹع������%s"
1176
1177#, python-format
1178msgid "Invalid accounter %s for printer %s"
1179msgstr "����ѭ����ԡ %s ��Ѻ��ͧ����s ��١��"
1180
1181#, python-format
1182msgid "Option accounter in section %s only supports values in %s"
1183msgstr "���͡����ѭ����ԡ��� %s ʹѺʹع੾���� %s"
1184
1185#, python-format
1186msgid "Option enforcement in section %s only supports values in %s"
1187msgstr "���͡ enforcement ��� %s ʹѺʹع੾���� %s"
1188
1189#, python-format
1190msgid "Option onaccountererror in section %s only supports values in %s"
1191msgstr ""
1192
1193#, python-format
1194msgid "Invalid policy %s for printer %s"
1195msgstr "����� %s ��Ѻ��ͧ����s ��١��"
1196
1197#, python-format
1198msgid "Option policy in section %s only supports values in %s"
1199msgstr "���͡�������� %s ʹѺʹع੾���� %s"
1200
1201#, python-format
1202msgid "Invalid option mailto %s for printer %s"
1203msgstr "���͡����%s ��Ѻ��ͧ����s ��١��"
1204
1205#, python-format
1206msgid "Option mailto in section %s only supports values in %s"
1207msgstr "���͡�����Ǵ %s ʹѺʹع੾���� %s"
1208
1209#, python-format
1210msgid "Invalid maximal deny banners counter %s"
1211msgstr ""
1212
1213#, python-format
1214msgid "Invalid grace delay %s"
1215msgstr "��grace delay %s ��١��"
1216
1217#, python-format
1218msgid "Invalid poor man's threshold %s"
1219msgstr "��poor man's threshold %s ��١��"
1220
1221msgid ""
1222"Your Print Quota account balance is Low.\n"
1223"Soon you'll not be allowed to print anymore.\n"
1224"Please contact the Print Quota Administrator to solve the problem."
1225msgstr ""
1226"���� �����ͧ������\n"
1227"�������þ����������������"
1228"���ҵԴ������к������������ѭ�"
1229
1230#, python-format
1231msgid ""
1232"You are not allowed to print anymore because\n"
1233"your Print Quota is exceeded on printer %s."
1234msgstr ""
1235"���� �س���ö�ӡ�����������ҡ\n"
1236"����㹡�������س����������ͧ����s."
1237
1238#, python-format
1239msgid ""
1240"You will soon be forbidden to print anymore because\n"
1241"your Print Quota is almost reached on printer %s."
1242msgstr ""
1243"���� �س������͹حҵ��ӡ����������\n"
1244"������������س�������ͧ����s."
1245
1246#, python-format
1247msgid "Option accountbanner in section %s only supports values in %s"
1248msgstr ""
1249
1250#, python-format
1251msgid "Option trustjobsize for printer %s is incorrect"
1252msgstr ""
1253
1254msgid "Users"
1255msgstr ""
1256
1257msgid "Groups"
1258msgstr ""
1259
1260msgid "Printers"
1261msgstr ""
1262
1263msgid "Users Print Quotas"
1264msgstr ""
1265
1266msgid "Users Groups Print Quotas"
1267msgstr ""
1268
1269msgid "History of Payments"
1270msgstr ""
1271
1272msgid "Printers Groups Membership"
1273msgstr ""
1274
1275msgid "Users Groups Membership"
1276msgstr ""
1277
1278msgid "Comma Separated Values"
1279msgstr ""
1280
1281msgid "Semicolon Separated Values"
1282msgstr ""
1283
1284msgid "Tabulation Separated Values"
1285msgstr ""
1286
1287msgid "eXtensible Markup Language"
1288msgstr ""
1289
1290msgid "CUPS' page_log"
1291msgstr ""
1292
1293#, python-format
1294msgid "Invalid filter value [%s], see help."
1295msgstr ""
1296
1297#, python-format
1298msgid "Invalid modifier [%s] for --data command line option, see help."
1299msgstr ""
1300
1301#, python-format
1302msgid "Invalid modifier [%s] for --format command line option, see help."
1303msgstr ""
1304
1305msgid "XML output is disabled because the jaxml module is not available."
1306msgstr ""
1307
1308msgid "PyKota data dumper failed : I/O error"
1309msgstr ""
1310
1311#, python-format
1312msgid "Unsupported logging subsystem %s"
1313msgstr "����ѹ�֡�����ʹѺʹع���ӧҹ %s"
1314
1315#, python-format
1316msgid "Report for %s quota on printer %s"
1317msgstr "�§ҹ�����������Ѻ %s ����ͧ����s"
1318
1319#, python-format
1320msgid "Pages grace time: %i days"
1321msgstr "˹�grace time : %i ��"
1322
1323#, python-format
1324msgid "Price per job: %.3f"
1325msgstr "��ҵ�ҹ : %.3f"
1326
1327#, python-format
1328msgid "Price per page: %.3f"
1329msgstr "��ҵ���: %.3f "
1330
1331msgid ""
1332"Group          overcharge   used    soft    hard    balance grace         "
1333"total       paid warn"
1334msgstr ""
1335
1336msgid ""
1337"User           overcharge   used    soft    hard    balance grace         "
1338"total       paid warn"
1339msgstr ""
1340
1341msgid "unknown"
1342msgstr "�������"
1343
1344#, python-format
1345msgid "Real : %s"
1346msgstr "����� : %s"
1347
1348#, python-format
1349msgid "Total : %9i"
1350msgstr "��: %9i"
1351
1352msgid "N/A"
1353msgstr ""
1354
1355#, python-format
1356msgid "Unsupported reporter backend %s"
1357msgstr "����§ҹ�ʹѺʹع %s"
1358
1359#, python-format
1360msgid "Unsupported quota storage backend %s"
1361msgstr "�������㹡��������ʹѺʹع %s"
1362
1363#, python-format
1364msgid "Strange problem with uid(%s) : %s"
1365msgstr ""
1366
1367#, python-format
1368msgid "Running as user '%s'."
1369msgstr ""
1370
1371msgid "No user named 'pykota'. Not dropping priviledges."
1372msgstr ""
1373
1374#, python-format
1375msgid "Impossible to drop priviledges : %s"
1376msgstr ""
1377
1378msgid "Priviledges dropped. Now running as user 'pykota'."
1379msgstr ""
1380
1381#, python-format
1382msgid "Impossible to regain priviledges : %s"
1383msgstr ""
1384
1385msgid "Regained priviledges. Now running as root."
1386msgstr ""
1387
1388#, python-format
1389msgid "Impossible to connect to SMTP server : %s"
1390msgstr "���ö�Դ��Ѻ SMTP ������"
1391
1392#, python-format
1393msgid "Impossible to send mail to %s, error %s : %s"
1394msgstr "���ö����� %s, ����Դ��� %s : %s"
1395
1396#, python-format
1397msgid ""
1398"\n"
1399"\n"
1400"Please contact your system administrator :\n"
1401"\n"
1402"\t%s - <%s>\n"
1403msgstr ""
1404"\n"
1405"\n"
1406"���ҵԴ������к� :\n"
1407"\n"
1408"\t%s - <%s>\n"
1409
1410#, python-format
1411msgid "Unable to match user %s on printer %s, applying default policy (%s)"
1412msgstr "�����ͼ�� %s ����ͧ����s, �����������ҹ����(%s)"
1413
1414#, python-format
1415msgid ""
1416"Unable to find user %s's account balance, applying default policy (%s) for "
1417"printer %s"
1418msgstr "��������ͧ��� %s, �����������ҹ����%s) �ͧ ��ͧ����s"
1419
1420#, python-format
1421msgid "User %s will not be charged for printing."
1422msgstr ""
1423
1424#, python-format
1425msgid "Print Quota exceeded for group %s on printer %s"
1426msgstr "���� ��������������%s ����ͧ����s ����
1427
1428msgid "Print Quota"
1429msgstr "����������
1430msgid "Print Quota Exceeded"
1431msgstr "����������Թ��
1432
1433#, python-format
1434msgid "Print Quota low for group %s on printer %s"
1435msgstr "��������������%s ����ͧ����s �����
1436
1437#, python-format
1438msgid "Print Quota exceeded for user %s on printer %s"
1439msgstr "����������� %s ����ͧ����s ����
1440
1441#, python-format
1442msgid "Print Quota low for user %s on printer %s"
1443msgstr "����������� %s ����ͧ����s �����
1444
1445msgid "Print Quota Low"
1446msgstr "���������������
1447
1448#, python-format
1449msgid "Printing system %s, args=%s"
1450msgstr "���������s, args=%s"
1451
1452#, python-format
1453msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
1454msgstr "���ö�ӡ��ӹdz��Ҵ�ͧ�ҹ��� PDL analyzer : %s"
1455
1456#, python-format
1457msgid "SIGTERM received, job %s cancelled."
1458msgstr "�����SIGTERM , �ҹ %s �١¡��."
1459
1460msgid "Printer hostname undefined, set to 'localhost'"
1461msgstr "������������������ҵ���� 'localhost'"
1462
1463#, python-format
1464msgid "Printing system unknown, args=%s"
1465msgstr "�������������args=%s"
1466
1467#, python-format
1468msgid ""
1469"Printer %s not registered in the PyKota system, applying external policy (%"
1470"s) for printer %s"
1471msgstr ""
1472"��ͧ����s ����ŧ������к��ͧ PyKota ,ŧ�������������ҹ�¹͡ (%"
1473"s) ��Ѻ��ͧ����s"
1474
1475#, python-format
1476msgid ""
1477"User %s not registered in the PyKota system, applying external policy (%s) "
1478"for printer %s"
1479msgstr ""
1480"��� %s ����ŧ������к��ͧ PyKota, ,ŧ�������������ҹ�¹͡ (%s) "
1481"��Ѻ��ͧ����s"
1482
1483#, python-format
1484msgid ""
1485"User %s doesn't have quota on printer %s in the PyKota system, applying "
1486"external policy (%s) for printer %s"
1487msgstr ""
1488"��� %s �����������캹��ͧ����s �к��ͧ PyKota, "
1489"ŧ�������������ҹ�¹͡ (%s) ��Ѻ��ͧ����s"
1490
1491#, python-format
1492msgid ""
1493"External policy %s for printer %s produced an error. Job rejected. Please "
1494"check PyKota's configuration files."
1495msgstr ""
1496"������ҹ�¹͡ %s ��Ѻ��ͧ����s ����Դ���. ¡�����ӧҹ. "
1497"���ҵ��������ԡ��ê���ͧ PyKota"
1498
1499#, python-format
1500msgid ""
1501"Printer %s not registered in the PyKota system, applying default policy (%s)"
1502msgstr ""
1503"��ͧ����s ����ŧ������к��ͧ PyKota, ŧ�������������ҹ����(%"
1504"s)"
1505
1506#, python-format
1507msgid ""
1508"User %s not registered in the PyKota system, applying default policy (%s) "
1509"for printer %s"
1510msgstr ""
1511"��� %s ����ŧ������к��ͧ PyKota, ŧ�������������ҹ����(%s) "
1512"��Ѻ��ͧ����s"
1513
1514#, python-format
1515msgid ""
1516"User %s doesn't have quota on printer %s in the PyKota system, applying "
1517"default policy (%s)"
1518msgstr ""
1519"��� %s �����������캹��ͧ����s �к��ͧ PyKota , ŧ����� "
1520"��������ҹ����(%s)"
1521
1522#, python-format
1523msgid ""
1524"Printer %s still not registered in the PyKota system, job will be rejected"
1525msgstr "��ͧ����s ������ŧ������к� PyKota, �ҹ���觨ж١¡��"
1526
1527#, python-format
1528msgid ""
1529"User %s still not registered in the PyKota system, job will be rejected on "
1530"printer %s"
1531msgstr "��� %s ������ŧ������к� PyKota, �ҹ���觨ж١¡�� printer %s"
1532
1533#, python-format
1534msgid ""
1535"User %s still doesn't have quota on printer %s in the PyKota system, job "
1536"will be rejected"
1537msgstr ""
1538"��� %s ���������������캹��ͧ����s �к� PyKota ,�ҹ���觨ж١¡�� "
1539
1540#, python-format
1541msgid "A problem occured while reading printer %s's internal page counter."
1542msgstr ""
1543
1544#, python-format
1545msgid "Retrieving printer %s's page counter from database instead."
1546msgstr ""
1547
1548#, python-format
1549msgid ""
1550"Couldn't retrieve printer %s's internal page counter either before or after "
1551"printing."
1552msgstr ""
1553
1554#, python-format
1555msgid "Job's size forced to 1 page for printer %s."
1556msgstr ""
1557
1558#, python-format
1559msgid "No previous job in database for printer %s."
1560msgstr ""
1561
1562#, python-format
1563msgid "Inconsistent values for printer %s's internal page counter."
1564msgstr ""
1565
1566#, python-format
1567msgid "Unknown printer address in HARDWARE(%s) for printer %s"
1568msgstr "��������ͧ��ͧ�������ó�%s) ��Ѻ��ͧ����s"
1569
1570#, python-format
1571msgid "Launching HARDWARE(%s)..."
1572msgstr "����ӧҹ�ͧ���ó�%s)..."
1573
1574#, python-format
1575msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
1576msgstr "���ҳ SIGTERM �١���ѧ���ó����ѭ����ԡ %s (pid: %s)"
1577
1578#, python-format
1579msgid "Line [%s] skipped in accounter's output. Trying again..."
1580msgstr ""
1581
1582#, python-format
1583msgid "Hardware accounter %s exit code is %s"
1584msgstr ""
1585
1586#, python-format
1587msgid "Unable to query printer %s via HARDWARE(%s)"
1588msgstr "���ä���������s ������ó�s)"
1589
1590#, python-format
1591msgid "Problem during connection to %s:%s : %s"
1592msgstr ""
1593
1594#, python-format
1595msgid "Problem while sending PJL query to %s:%s : %s"
1596msgstr ""
1597
1598#, python-format
1599msgid "Waiting for printer %s to be printing..."
1600msgstr ""
1601
1602#, python-format
1603msgid "Waiting for printer %s's idle status to stabilize..."
1604msgstr ""
1605
1606#, python-format
1607msgid ""
1608"PJL querying stage interrupted. Using latest value seen for internal page "
1609"counter (%s) on printer %s."
1610msgstr ""
1611
1612#, python-format
1613msgid "Network error while doing SNMP queries on printer %s : %s"
1614msgstr ""
1615
1616#, python-format
1617msgid "SNMP message decoding error for printer %s : %s"
1618msgstr ""
1619
1620#, python-format
1621msgid "Problem encountered while doing SNMP queries on printer %s : %s"
1622msgstr ""
1623
1624#, python-format
1625msgid ""
1626"SNMP querying stage interrupted. Using latest value seen for internal page "
1627"counter (%s) on printer %s."
1628msgstr ""
1629
1630#, python-format
1631msgid "Launching SOFTWARE(%s)..."
1632msgstr "����ӧҹ�ͧ�Ϳ���(%s)..."
1633
1634#, python-format
1635msgid "Unable to compute job size with accounter %s"
1636msgstr "���ö�ӹdz��Ҵ�ҹ�������Ҫԡ %s"
1637
1638#, python-format
1639msgid "Problem while waiting for software accounter pid %s to exit : %s"
1640msgstr "���ѭ��ҡ�����Ϳ�������Ҫԡ pid %s ��͡ : %s"
1641
1642#, python-format
1643msgid "Software accounter %s exit code is %s"
1644msgstr "�Ϳ�������Ҫԡ %s ���觡����� %s"
1645
1646msgid "Totals may be inaccurate if some users are members of several groups."
1647msgstr "�ӹǹ��Ҩ��١�� ������ҧ�����Ҫԡ�ͧ����¡��"
1648
1649#, python-format
1650msgid ""
1651"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
1652"double check /etc/pykota/pykota.conf : %s"
1653msgstr ""
1654"�š����%s ���. ������������١�� �������� /etc/pykota/pykota.conf : %"
1655"s �����
1656
1657#, python-format
1658msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
1659msgstr "�š����%s(%s) �ҡ %s(scope=%s) �� ����觷���"
1660
1661#, python-format
1662msgid "Problem adding LDAP entry (%s, %s)"
1663msgstr "���ѭ�㹡�������� LDAP (%s, %s)"
1664
1665#, python-format
1666msgid "Problem deleting LDAP entry (%s)"
1667msgstr "���ѭ�㹡�ź����ҡ LDAP (%s, %s)"
1668
1669#, python-format
1670msgid "Problem modifying LDAP entry (%s, %s)"
1671msgstr "���ѭ�㹡��㢢���LDAP (%s, %s)"
1672
1673#, python-format
1674msgid ""
1675"No pykotaAccountBalance object found for user %s. Did you create LDAP "
1676"entries manually ?"
1677msgstr ""
1678
1679#, python-format
1680msgid ""
1681"Unable to find an existing objectClass %s entry with %s=%s to attach "
1682"pykotaAccount objectClass"
1683msgstr ""
1684"���ö�鹾��������%s ���Ҷ֧�� %s=%s �����Ѻ ����Ҫԡ Pykota "
1685"�������
1686
1687#, python-format
1688msgid "%s. A new entry will be created instead."
1689msgstr ""
1690
1691#, python-format
1692msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
1693msgstr "���ö�鹾�������Ҷ֧�������Ѻ pykotaGroup �������%s"
1694
1695msgid "Hidden because of privacy concerns"
1696msgstr ""
1697
1698msgid "Summarize"
1699msgstr ""
1700
1701msgid "Invalid data type [%s] for --sum command line option, see help."
1702msgstr ""
1703
1704msgid "only for payments or history"
1705msgstr ""
1706
1707msgid "Job is a duplicate. Printing is denied by subprocess."
1708msgstr ""
1709
1710msgid "Job is a duplicate. Printing is allowed by subprocess."
1711msgstr ""
1712
1713msgid "Please report bugs to :"
1714msgstr ""
1715
1716#~ msgid ""
1717#~ "Group           used    soft    hard    balance grace         total       "
1718#~ "paid"
1719#~ msgstr ""
1720#~ "���          ��   soft    hard    ���� grace         ��      ���
1721
1722#~ msgid ""
1723#~ "User            used    soft    hard    balance grace         total       "
1724#~ "paid"
1725#~ msgstr ""
1726#~ "���            ��   soft    hard    ���� grace         ��      ���
Note: See TracBrowser for help on using the browser.