root / pykota / trunk / po / pykota.pot @ 3216

Revision 3211, 77.1 kB (checked in by jerome, 17 years ago)

Added missing ordering field for CGI data dumper...

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1# PyKota
2#
3# PyKota : Print Quotas for CUPS and LPRng
4#
5# (c) 2003, 2004, 2005, 2006, 2007 Jerome Alet <alet@librelogiciel.com>
6# This program is free software; you can redistribute it and/or modify
7# it under the terms of the GNU General Public License as published by
8# the Free Software Foundation; either version 2 of the License, or
9# (at your option) any later version.
10#
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14# GNU General Public License for more details.
15#
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
19#
20# $Id$
21#
22# PyKota translation master file.
23#
24msgid ""
25msgstr ""
26"Project-Id-Version: PyKota v1.25\n"
27"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
28"POT-Creation-Date: 2006-03-30 22:00+0200\n"
29"PO-Revision-Date: 2006-12-03 23:46:00+0100\n"
30"Last-Translator: Jerome Alet <alet@librelogiciel.com>\n"
31"Language-Team: English <alet@librelogiciel.com>\n"
32"MIME-Version: 1.0\n"
33"Content-Type: text/plain; charset=ISO-8859-15\n"
34"Content-Transfer-Encoding: 8bit\n"
35
36#
37# NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY
38#
39msgid "ALLOW"
40msgstr ""
41
42msgid "DENY"
43msgstr ""
44
45msgid "CANCEL"
46msgstr ""
47
48msgid "PROBLEM"
49msgstr ""
50
51msgid "REFUND"
52msgstr ""
53
54
55#, python-format
56msgid ""
57"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
58"\n"
59"A tool to automate user account creation and initial balance setting.\n"
60"\n"
61"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
62"\n"
63"command line usage :\n"
64"\n"
65"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
66"  OF AN external policy IN pykota.conf\n"
67"  \n"
68"  autopykota { -i | --initbalance value } \n"
69"\n"
70"options :\n"
71"\n"
72"  -v | --version       Prints autopykota's version number then exits.\n"
73"  -h | --help          Prints this message then exits.\n"
74"  \n"
75"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
76"                       If the user already exists, actual balance is left\n"
77"                       unmodified. If unset, the default value is 0.\n"
78"\n"
79"  -e | --email addr    Sets the user's e-mail address.\n"
80"  \n"
81msgstr ""
82
83#, python-format
84msgid "SIGTERM received, job %s cancelled."
85msgstr ""
86
87#, python-format
88msgid "Network error while querying the CUPS server : %s"
89msgstr ""
90
91msgid "You are not allowed to print at this time."
92msgstr ""
93
94msgid "Print job cancelled."
95msgstr ""
96
97msgid "Unlimited"
98msgstr ""
99
100msgid "ON"
101msgstr ""
102
103msgid "OFF"
104msgstr ""
105
106#, python-format
107msgid "Banner generator %s exit code is %s"
108msgstr ""
109
110msgid "Banner won't be printed : maximum number of deny banners reached."
111msgstr ""
112
113#, python-format
114msgid "Beware : computed job size (%s) != precomputed job size (%s)"
115msgstr ""
116
117msgid ""
118"The job size will be trusted anyway according to the 'trustjobsize' directive"
119msgstr ""
120
121#, python-format
122msgid ""
123"The job size will be trusted because it is inferior to the 'trustjobsize' "
124"directive's limit %s"
125msgstr ""
126
127#, python-format
128msgid ""
129"The job size will be modified according to the 'trustjobsize' directive : %s"
130msgstr ""
131
132#, python-format
133msgid ""
134"Printer %s not registered in the PyKota system, applying external policy (%"
135"s) for printer %s"
136msgstr ""
137
138#, python-format
139msgid ""
140"User %s not registered in the PyKota system, applying external policy (%s) "
141"for printer %s"
142msgstr ""
143
144#, python-format
145msgid ""
146"User %s doesn't have quota on printer %s in the PyKota system, applying "
147"external policy (%s) for printer %s"
148msgstr ""
149
150#, python-format
151msgid ""
152"External policy %s for printer %s produced an error. Job rejected. Please "
153"check PyKota's configuration files."
154msgstr ""
155
156#, python-format
157msgid ""
158"Printer %s not registered in the PyKota system, applying default policy (%s)"
159msgstr ""
160
161#, python-format
162msgid ""
163"User %s not registered in the PyKota system, applying default policy (%s) "
164"for printer %s"
165msgstr ""
166
167#, python-format
168msgid ""
169"User %s doesn't have quota on printer %s in the PyKota system, applying "
170"default policy (%s)"
171msgstr ""
172
173#, python-format
174msgid ""
175"Printer %s still not registered in the PyKota system, job will be rejected"
176msgstr ""
177
178#, python-format
179msgid ""
180"User %s still not registered in the PyKota system, job will be rejected on "
181"printer %s"
182msgstr ""
183
184#, python-format
185msgid ""
186"User %s still doesn't have quota on printer %s in the PyKota system, job "
187"will be rejected"
188msgstr ""
189
190msgid "Job is a dupe"
191msgstr ""
192
193msgid "Printing is denied by configuration"
194msgstr ""
195
196#, python-format
197msgid "Duplicate print jobs are not allowed on printer %s."
198msgstr ""
199
200msgid "Subprocess denied printing of a dupe"
201msgstr ""
202
203#, python-format
204msgid "Duplicate print jobs are not allowed on printer %s at this time."
205msgstr ""
206
207msgid "Subprocess allowed printing of a dupe"
208msgstr ""
209
210#, python-format
211msgid ""
212"\n"
213"\n"
214"Your system administrator :\n"
215"\n"
216"\t%s - <%s>\n"
217msgstr ""
218
219#, python-format
220msgid "Impossible to connect to SMTP server : %s"
221msgstr ""
222
223msgid "Print Quota"
224msgstr ""
225
226#, python-format
227msgid "Impossible to send mail to %s, error %s : %s"
228msgstr ""
229
230#, python-format
231msgid "Problem when sending mail : %s"
232msgstr ""
233
234msgid "Job contains no data. Printing is denied."
235msgstr ""
236
237msgid "Error in external policy script. Printing is denied."
238msgstr ""
239
240#, python-format
241msgid ""
242"Still no print quota entry for user %s on printer %s after external policy. "
243"Printing is denied."
244msgstr ""
245
246msgid "Printing is denied by printer policy."
247msgstr ""
248
249msgid "Job allowed by printer policy. No accounting will be done."
250msgstr ""
251
252#, python-format
253msgid "Invalid policy %s for printer %s"
254msgstr ""
255
256#, python-format
257msgid "Precomputed job size (%s pages) too large for printer %s."
258msgstr ""
259
260#, python-format
261msgid "You are not allowed to print so many pages on printer %s at this time."
262msgstr ""
263
264#, python-format
265msgid "User %s is not allowed to print at this time."
266msgstr ""
267
268msgid "Your account settings forbid you to print at this time."
269msgstr ""
270
271#, python-format
272msgid "Print Quota exceeded for user %s on printer %s"
273msgstr ""
274
275#, python-format
276msgid "Print Quota low for user %s on printer %s"
277msgstr ""
278
279msgid "Job denied, no accounting will be done."
280msgstr ""
281
282msgid "Job cancelled, no accounting will be done."
283msgstr ""
284
285msgid "Job accounting begins."
286msgstr ""
287
288msgid "Job denied, no accounting has been done."
289msgstr ""
290
291msgid "Job cancelled, no accounting has been done."
292msgstr ""
293
294msgid "Job accounting ends."
295msgstr ""
296
297msgid ""
298"Job size forced to 0 because the real CUPS backend failed. No accounting "
299"will be done."
300msgstr ""
301
302msgid "The real CUPS backend failed, but the job will be accounted for anyway."
303msgstr ""
304
305msgid "Job size forced to 0 because printing is denied."
306msgstr ""
307
308msgid "Job size forced to 0 because printing was cancelled."
309msgstr ""
310
311#, python-format
312msgid "Job size : %i"
313msgstr ""
314
315#, python-format
316msgid "User %s's quota on printer %s won't be modified"
317msgstr ""
318
319#, python-format
320msgid "Updating user %s's quota on printer %s"
321msgstr ""
322
323msgid "Job added to history."
324msgstr ""
325
326#, python-format
327msgid "Billing code %s was updated."
328msgstr ""
329
330#, python-format
331msgid "Incorrect value for the 'onbackenderror' directive in section [%s]"
332msgstr ""
333
334#, python-format
335msgid "The real backend produced an error, we will try again in %s seconds."
336msgstr ""
337
338#, python-format
339msgid "Job %s interrupted by the administrator !"
340msgstr ""
341
342#, python-format
343msgid ""
344"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
345"\n"
346"Dumps PyKota database's content.\n"
347"\n"
348"command line usage :\n"
349"\n"
350"  dumpykota [options] [filterexpr]\n"
351"\n"
352"options :\n"
353"\n"
354"  -v | --version       Prints dumpykota's version number then exits.\n"
355"  -h | --help          Prints this message then exits.\n"
356"  \n"
357"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
358"                       \n"
359"                         - history : dumps the jobs history.\n"
360"                         - users : dumps users.\n"
361"                         - groups : dumps user groups.\n"
362"                         - printers : dump printers.\n"
363"                         - upquotas : dump user quotas.\n"
364"                         - gpquotas : dump user groups quotas.\n"
365"                         - payments : dumps user payments.\n"
366"                         - pmembers : dumps printer groups members.\n"
367"                         - umembers : dumps user groups members.\n"
368"                         - billingcodes : dumps billing codes.\n"
369"                         - all : dumps all PyKota datas. The output format\n"
370"                                 is always XML in this case.\n"
371"                         \n"
372"                       NB : the -d | --data command line option   \n"
373"                       is MANDATORY.\n"
374"  \n"
375"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
376"                       the format is to dump datas in the csv format (comma\n"
377"                       separated values). All data dumped is between double\n"
378"                       quotes. Allowed formats are :\n"
379"                       \n"
380"                         - csv : separate datas with commas\n"
381"                         - ssv : separate datas with semicolons\n"
382"                         - tsv : separate datas with tabs\n"
383"                         - xml : dump data as XML \n"
384"                         - cups : dump datas in CUPS' page_log format :\n"
385"                                  ONLY AVAILABLE WITH --data history\n"
386"                         \n"
387"  -o | --output fname  All datas will be dumped to the file instead of\n"
388"                       to the standard output. The special '-' filename\n"
389"                       is the default value and means stdout.\n"
390"                       WARNING : existing files are truncated !\n"
391"\n"
392"  -O | --orderby exp   Change the ordering or result. 'exp' is a comma\n"
393"                       separated list of ordering statements, for example\n"
394"                       '--orderby +username,-printername'. Not all "
395"expression\n"
396"                       values are meaningful, so using this command line \n"
397"                       switch is not recommanded if you don't know the \n"
398"                       exact layout of PyKota's database schema.\n"
399"                       \n"
400"  -s | --sum           Summarize the selected datas.\n"
401"                           ONLY AVAILABLE WITH --data history or payments\n"
402"\n"
403"  Use the filter expressions to extract only parts of the \n"
404"  datas. Allowed filters are of the form :\n"
405"                \n"
406"         key=value\n"
407"                         \n"
408"  Allowed keys for now are :  \n"
409"                       \n"
410"         username       User's name\n"
411"         groupname      Users group's name\n"
412"         printername    Printer's name\n"
413"         pgroupname     Printers group's name\n"
414"         hostname       Client's hostname\n"
415"         jobid          Job's Id\n"
416"         billingcode    Job's billing code\n"
417"         start          Job's date of printing\n"
418"         end            Job's date of printing\n"
419"         \n"
420"  Dates formatting with 'start' and 'end' filter keys :\n"
421"  \n"
422"    YYYY : year boundaries\n"
423"    YYYYMM : month boundaries\n"
424"    YYYYMMDD : day boundaries\n"
425"    YYYYMMDDhh : hour boundaries\n"
426"    YYYYMMDDhhmm : minute boundaries\n"
427"    YYYYMMDDhhmmss : second boundaries\n"
428"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
429"15)\n"
430"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
431"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
432"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
433"\n"
434"  'now' and 'today' are not exactly the same since today represents the "
435"first\n"
436"  or last second of the day depending on if it's used in a start= or end=\n"
437"  date expression. The utility to be able to specify dates in the future is\n"
438"  a question which remains to be answered :-)\n"
439"  \n"
440"  Contrary to other PyKota management tools, wildcard characters are not \n"
441"  expanded, so you can't use them.\n"
442"  \n"
443"  NB : not all keys are allowed for each data type, so the result may be \n"
444"  empty if you use a key not available for a particular data type.\n"
445"  \n"
446"Examples :\n"
447"\n"
448"  $ dumpykota --data history --format csv >myfile.csv\n"
449"  \n"
450"  This dumps the history in a comma separated values file, for possible\n"
451"  use in a spreadsheet.\n"
452"  \n"
453"  $ dumpykota --data users --format xml -o users.xml\n"
454"  \n"
455"  Dumps all users datas to the users.xml file.\n"
456"  \n"
457"  $ dumpykota --data history printername=HP2100 username=jerome\n"
458"  \n"
459"  Dumps the job history for user jerome on printer HP2100 only.\n"
460"  \n"
461"  $ dumpykota --data history start=200503 end=20050730234615\n"
462"  \n"
463"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
464"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
465msgstr ""
466
467msgid "The -d | --data command line option is mandatory, see help."
468msgstr ""
469
470#, python-format
471msgid ""
472"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
473"\n"
474"A Print Quota editor for PyKota.\n"
475"\n"
476"command line usage :\n"
477"\n"
478"  edpykota [options] user1 user2 ... userN\n"
479"  \n"
480"  edpykota [options] group1 group2 ... groupN\n"
481"\n"
482"options :\n"
483"\n"
484"  -v | --version       Prints edpykota's version number then exits.\n"
485"  -h | --help          Prints this message then exits.\n"
486"  \n"
487"  -a | --add           Adds users or groups print quota entries if\n"
488"                       they don't exist in database.\n"
489"                       \n"
490"  -d | --delete        Deletes users or groups print quota entries.\n"
491"                       Users or groups are never deleted, you have\n"
492"                       to use the pkusers command to delete them.\n"
493"                       The history will be purge from all matching\n"
494"                       jobs, unless -g | --groups is used.\n"
495"  \n"
496"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
497"                       use wildcards characters to select only\n"
498"                       some printers. The default value is *, meaning\n"
499"                       all printers. \n"
500"                       You can specify several names or wildcards, \n"
501"                       by separating them with commas.\n"
502"  \n"
503"  -g | --groups        Edit groups print quota entries instead of \n"
504"                       users print quota entries.\n"
505"                          \n"
506"  -L | --list          Lists users or groups print quota entries.\n"
507"  \n"
508"  -n | --noquota       Sets both soft and hard limits to None for users\n"
509"                       or groups print quota entries.\n"
510"  \n"
511"  -r | --reset         Resets the actual page counter for the user\n"
512"                       or group to zero on the specified printers. \n"
513"                       The life time page counter is kept unchanged.\n"
514"                       \n"
515"  -R | --hardreset     Resets the actual and life time page counters\n"
516"                       for the user or group to zero on the specified \n"
517"                       printers. This is a shortcut for '--used 0'.\n"
518"                       \n"
519"  -s | --skipexisting  In combination with the --add option above, tells\n"
520"                       edpykota to not modify existing print quota entries.\n"
521"                       \n"
522"  -S | --softlimit sl  Sets the quota soft limit to sl "
523"pages.                       \n"
524"  \n"
525"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
526"  \n"
527"  -I | --increase v    Increase existing Soft and Hard limits by the value\n"
528"                       of v. You can prefix v with + or -, if no sign is\n"
529"                       used, + is assumed.\n"
530"\n"
531"  -U | --used u        Sets the page counters for the user u pages on\n"
532"                       the selected printers. Doesn't work for groups, "
533"since\n"
534"                       their page counters are the sum of all their "
535"members'\n"
536"                       page counters.\n"
537"                       Useful for migrating users from a different system\n"
538"                       where they have already used some pages. Actual\n"
539"                       and Life Time page counters may be increased or "
540"decreased\n"
541"                       if u is prefixed with + or -.\n"
542"                       WARNING : BOTH page counters are modified in all "
543"cases,\n"
544"                       so be careful.\n"
545"                       NB : if u equals '0', then the action taken is\n"
546"                       the same as if --hardreset was used.\n"
547"\n"
548"  user1 through userN and group1 through groupN can use wildcards\n"
549"  if the --add option is not set.\n"
550"  \n"
551"examples :                              \n"
552"\n"
553"  $ edpykota --add john paul george ringo\n"
554"  \n"
555"  This will create print quota entries for users john, paul, george\n"
556"  and ringo on all printers. These print quota entries will have no\n"
557"  limit set.\n"
558"  \n"
559"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
560"  \n"
561"  This will set jerome's print quota on the lp printer to a soft limit\n"
562"  of 50 pages, and a hard limit of 60 pages. Both user jerome and\n"
563"  printer lp have been previously created with the pkusers and pkprinters\n"
564"  commands, respectively.\n"
565"\n"
566"  $ edpykota -g -S 500 -H 550 financial support            \n"
567"  \n"
568"  This will set print quota soft limit to 500 pages and hard limit\n"
569"  to 550 pages for groups financial and support on all printers.\n"
570"  \n"
571"  $ edpykota --reset jerome \"jo*\"\n"
572"  \n"
573"  This will reset jerome's page counter to zero on all printers, as\n"
574"  well as every user whose name begins with 'jo'.\n"
575"  Their life time page counter on each printer will be kept unchanged.\n"
576"  You can also reset the life time page counters by using the\n"
577"  --hardreset | -R command line option.\n"
578"  \n"
579"  $ edpykota --printer hpcolor --noquota jerome\n"
580"  \n"
581"  This will tell PyKota to not limit jerome when printing on the \n"
582"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
583"  accounting of the pages he prints will still be kept.\n"
584"  Print Quotas for jerome on other printers are unchanged.\n"
585"  \n"
586"  $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n"
587"  \n"
588"  This will delete users jerome and rachel's print quota\n"
589"  entries on all printers which name begin with 'HP' or\n"
590"  'XER'. The jobs printed by these users on these printers\n"
591"  will be deleted from the history.\n"
592msgstr ""
593
594#, python-format
595msgid "You can't set negative limits for %s"
596msgstr ""
597
598msgid "Extracting datas"
599msgstr ""
600
601#, python-format
602msgid "Page counter : %s"
603msgstr ""
604
605#, python-format
606msgid "Lifetime page counter : %s"
607msgstr ""
608
609#, python-format
610msgid "Soft limit : %s"
611msgstr ""
612
613#, python-format
614msgid "Hard limit : %s"
615msgstr ""
616
617#, python-format
618msgid "Date limit : %s"
619msgstr ""
620
621#, python-format
622msgid "Maximum job size : %s"
623msgstr ""
624
625#, python-format
626msgid "%s pages"
627msgstr ""
628
629#, python-format
630msgid "Warning banners printed : %s"
631msgstr ""
632
633msgid "Deletion"
634msgstr ""
635
636#, python-format
637msgid "Invalid used value %s."
638msgstr ""
639
640#, python-format
641msgid "Invalid increase value %s."
642msgstr ""
643
644#, python-format
645msgid "Invalid softlimit value %s."
646msgstr ""
647
648#, python-format
649msgid "Invalid hardlimit value %s."
650msgstr ""
651
652#, python-format
653msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
654msgstr ""
655
656#, python-format
657msgid "Undefined hard limit set to soft limit (%s)."
658msgstr ""
659
660#, python-format
661msgid "Undefined soft limit set to hard limit (%s)."
662msgstr ""
663
664msgid "Creation"
665msgstr ""
666
667#, python-format
668msgid "No entry matches %s. Please use pkusers to create them first."
669msgstr ""
670
671msgid "Modification"
672msgstr ""
673
674msgid "incompatible options, see help."
675msgstr ""
676
677msgid "You have to pass user or group names on the command line"
678msgstr ""
679
680#, python-format
681msgid ""
682"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
683"\n"
684"Generates print quota reports.\n"
685"\n"
686"command line usage :\n"
687"\n"
688"  repykota [options] \n"
689"\n"
690"options :\n"
691"\n"
692"  -v | --version       Prints repykota's version number then exits.\n"
693"  -h | --help          Prints this message then exits.\n"
694"  \n"
695"  -u | --users         Generates a report on users quota, this is \n"
696"                       the default.\n"
697"  \n"
698"  -g | --groups        Generates a report on group quota instead of users.\n"
699"  \n"
700"  -i | --ingroups g1[,g2...]  Only lists users who are members of these\n"
701"                              groups. Reserved to PyKota Administrators.\n"
702"  \n"
703"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
704"                       use wildcards characters to select only\n"
705"                       some printers. The default value is *, meaning\n"
706"                       all printers.\n"
707"                       You can specify several names or wildcards, \n"
708"                       by separating them with commas.\n"
709"  \n"
710"examples :                              \n"
711"\n"
712"  $ repykota --printer lp\n"
713"  \n"
714"  This will print the quota status for all users who use the lp printer.\n"
715"\n"
716"  $ repykota \n"
717"  \n"
718"  This will print the quota status for all users on all printers.\n"
719"  \n"
720"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
721"  \n"
722"  This will print the quota status for user jerome and all users\n"
723"  whose name begins with \"jo\" on all printers which name begins\n"
724"  with \"laser\" or ends with \"pson\".\n"
725"  \n"
726"  If launched by an user who is not a PyKota administrator, additionnal\n"
727"  arguments representing users or groups names are ignored, and only the\n"
728"  current user/group is reported.\n"
729msgstr ""
730
731msgid "Option --ingroups is reserved to PyKota Administrators."
732msgstr ""
733
734#, python-format
735msgid "There's no printer matching %s"
736msgstr ""
737
738#, python-format
739msgid ""
740"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
741"\n"
742"Sends mail to users over print quota.\n"
743"\n"
744"command line usage :\n"
745"\n"
746"  warnpykota  [options]  [names]\n"
747"\n"
748"options :\n"
749"\n"
750"  -v | --version       Prints warnpykota's version number then exits.\n"
751"  -h | --help          Prints this message then exits.\n"
752"  \n"
753"  -u | --users         Warns users over their print quota, this is the \n"
754"                       default.\n"
755"  \n"
756"  -g | --groups        Warns users whose groups quota are over limit.\n"
757"  \n"
758"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
759"                       use wildcards characters to select only\n"
760"                       some printers. The default value is *, meaning\n"
761"                       all printers.\n"
762"                       You can specify several names or wildcards, \n"
763"                       by separating them with commas.\n"
764"  \n"
765"examples :                              \n"
766"\n"
767"  $ warnpykota --printer lp\n"
768"  \n"
769"  This will warn all users of the lp printer who have exceeded their\n"
770"  print quota.\n"
771"\n"
772"  $ warnpykota \n"
773"  \n"
774"  This will warn all users  who have exceeded their print quota on\n"
775"  any printer.\n"
776"\n"
777"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
778"  \n"
779"  This will warn all users of groups which names begins with \"dev\" and\n"
780"  who have exceeded their print quota on any printer which name begins \n"
781"  with \"laserjet\"\n"
782"  \n"
783"  If launched by an user who is not a PyKota administrator, additionnal\n"
784"  arguments representing users or groups names are ignored, and only the\n"
785"  current user/group is reported.\n"
786msgstr ""
787
788#, python-format
789msgid ""
790"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
791"\n"
792"Generates banners.\n"
793"\n"
794"command line usage :\n"
795"\n"
796"  pkbanner  [options]  [more info]\n"
797"\n"
798"options :\n"
799"\n"
800"  -v | --version       Prints pkbanner's version number then exits.\n"
801"  -h | --help          Prints this message then exits.\n"
802"  \n"
803"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
804"                       be drawn at the center top of the page. The default\n"
805"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
806"                       \n"
807"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
808"                       page sizes are recognized, like 'A4' or 'Letter'\n"
809"                       to name a few. The default size is A4.\n"
810"  \n"
811"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
812"                       used to save toner. The default value is 0, which\n"
813"                       means that no toner saving will be done.\n"
814"  \n"
815"  -u | --url u         Uses u as an url to be written at the bottom of \n"
816"                       the banner page. The default url is :\n"
817"                       http://www.pykota.com/\n"
818"  \n"
819"examples :                              \n"
820"\n"
821"  Using pkbanner directly from the command line is not recommended,\n"
822"  excepted for testing purposes. You should use pkbanner in the\n"
823"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
824"  \n"
825"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
826"  \n"
827"      With such a setting in pykota.conf, all print jobs will be \n"
828"      prefixed with an A4 banner with no logo, and text luminosity will\n"
829"      be increased by 75%%. The PostScript output will be directly sent\n"
830"      to your printer.\n"
831"      \n"
832"  You'll find more examples in the sample configuration file included    \n"
833"  in PyKota.\n"
834msgstr ""
835
836msgid "Unknown"
837msgstr ""
838
839msgid "Username"
840msgstr ""
841
842msgid "More Info"
843msgstr ""
844
845msgid "Job"
846msgstr ""
847
848msgid "Date"
849msgstr ""
850
851msgid "Allowed"
852msgstr ""
853
854msgid "Denied"
855msgstr ""
856
857msgid "Allowed with Warning"
858msgstr ""
859
860msgid "Problem"
861msgstr ""
862
863msgid "Cancelled"
864msgstr ""
865
866msgid "Result"
867msgstr ""
868
869msgid "Title"
870msgstr ""
871
872msgid "Filename"
873msgstr ""
874
875#, python-format
876msgid "Pages printed so far on %s"
877msgstr ""
878
879msgid "Account balance"
880msgstr ""
881
882msgid "Soft Limit"
883msgstr ""
884
885msgid "Hard Limit"
886msgstr ""
887
888msgid "Date Limit"
889msgstr ""
890
891msgid "No Limit"
892msgstr ""
893
894msgid "No Accounting"
895msgstr ""
896
897msgid "Forbidden"
898msgstr ""
899
900msgid "Printing Mode"
901msgstr ""
902
903msgid "Allowed range is (0..99)"
904msgstr ""
905
906#, python-format
907msgid "Invalid 'savetoner' option %s : %s"
908msgstr ""
909
910#, python-format
911msgid "Invalid 'pagesize' option %s, defaulting to A4."
912msgstr ""
913
914#, python-format
915msgid ""
916"pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n"
917"\n"
918"A billing codes Manager for PyKota.\n"
919"\n"
920"command line usage :\n"
921"\n"
922"  pkbcodes [options] code1 code2 code3 ... codeN\n"
923"\n"
924"options :\n"
925"\n"
926"  -v | --version       Prints pkbcodes version number then exits.\n"
927"  -h | --help          Prints this message then exits.\n"
928"  \n"
929"  -a | --add           Adds billing codes if they don't exist in PyKota's\n"
930"                       database. If they exist, they are modified\n"
931"                       unless -s|--skipexisting is also used.\n"
932"\n"
933"  -d | --delete        Deletes billing codes from PyKota's database.\n"
934"                       NB : the history entries with this billing code\n"
935"                       are not deleted, voluntarily.\n"
936"\n"
937"  -D | --description d Adds a textual description to billing codes.\n"
938"\n"
939"  -l | --list          List informations about the billing codes.\n"
940"\n"
941"  -r | --reset         Resets the billing codes' balance and page counters\n"
942"                       to 0.\n"
943"\n"
944"  -s | --skipexisting  In combination with the --add option above, tells\n"
945"                       pkbcodes to not modify existing billing codes.\n"
946"\n"
947"  code1 through codeN can contain wildcards if the --add option\n"
948"  is not set.\n"
949"\n"
950"examples :                              \n"
951"\n"
952"  $ pkbcodes --add -D \"My project\" myproj\n"
953"\n"
954"  Will create the myproj billing code with \"My project\"\n"
955"  as the description.\n"
956"\n"
957"  $ pkbcodes --delete \"*\"\n"
958"\n"
959"  This will completely delete all the billing codes, but without\n"
960"  removing any matching job from the history. USE WITH CARE ANYWAY !\n"
961"  \n"
962"  $ pkbcodes --list \"my*\"\n"
963"  \n"
964"  This will list all billing codes which name begins with 'my'.\n"
965msgstr ""
966
967msgid "You're not allowed to use this command."
968msgstr ""
969
970#, python-format
971msgid "There's no billingcode matching %s"
972msgstr ""
973
974msgid "pages"
975msgstr ""
976
977msgid "and"
978msgstr ""
979
980msgid "credits"
981msgstr ""
982
983#, python-format
984msgid "Billing code [%s] already exists, skipping."
985msgstr ""
986
987#, python-format
988msgid "Billing code [%s] already exists, will be modified."
989msgstr ""
990
991msgid "You have to pass billing codes on the command line"
992msgstr ""
993
994#, python-format
995msgid ""
996"pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n"
997"\n"
998"An invoice generator for PyKota.\n"
999"\n"
1000"command line usage :\n"
1001"\n"
1002"  pkinvoice [options] [filterexpr]\n"
1003"\n"
1004"options :\n"
1005"\n"
1006"  -v | --version       Prints pkinvoice's version number then exits.\n"
1007"  -h | --help          Prints this message then exits.\n"
1008"  \n"
1009"  -l | --logo img      Use the image as the invoice's logo. The logo will\n"
1010"                       be drawn at the center top of the page. The default\n"
1011"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
1012"                       \n"
1013"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
1014"                       page sizes are recognized, like 'A4' or 'Letter'\n"
1015"                       to name a few. The default size is A4.\n"
1016"                       \n"
1017"  -n | --number N      Sets the number of the first invoice. This number\n"
1018"                       will automatically be incremented for each invoice.\n"
1019"                       \n"
1020"  -o | --output f.pdf  Defines the name of the invoice file which will\n"
1021"                       be generated as a PDF document. If not set or\n"
1022"                       set to '-', the PDF document is sent to standard\n"
1023"                       output. \n"
1024"                       \n"
1025"  -u | --unit u        Defines the name of the unit to use on the "
1026"invoice.                       \n"
1027"                       The default unit is 'Credits', optionally translated\n"
1028"                       to your native language if it is supported by "
1029"PyKota.\n"
1030"  \n"
1031"  -V | --vat p         Sets the percent value of the applicable VAT to be\n"
1032"                       exposed. The default is 0.0, meaning no VAT\n"
1033"                       information will be included.\n"
1034"  \n"
1035"\n"
1036"  Use the filter expressions to extract only parts of the \n"
1037"  datas. Allowed filters are of the form :\n"
1038"                \n"
1039"         key=value\n"
1040"                         \n"
1041"  Allowed keys for now are :  \n"
1042"                       \n"
1043"         username       User's name\n"
1044"         printername    Printer's name\n"
1045"         hostname       Client's hostname\n"
1046"         jobid          Job's Id\n"
1047"         billingcode    Job's billing code\n"
1048"         start          Job's date of printing\n"
1049"         end            Job's date of printing\n"
1050"         \n"
1051"  Dates formatting with 'start' and 'end' filter keys :\n"
1052"  \n"
1053"    YYYY : year boundaries\n"
1054"    YYYYMM : month boundaries\n"
1055"    YYYYMMDD : day boundaries\n"
1056"    YYYYMMDDhh : hour boundaries\n"
1057"    YYYYMMDDhhmm : minute boundaries\n"
1058"    YYYYMMDDhhmmss : second boundaries\n"
1059"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
1060"15)\n"
1061"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
1062"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
1063"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
1064"\n"
1065"  'now' and 'today' are not exactly the same since today represents the "
1066"first\n"
1067"  or last second of the day depending on if it's used in a start= or end=\n"
1068"  date expression. The utility to be able to specify dates in the future is\n"
1069"  a question which remains to be answered :-)\n"
1070"  \n"
1071"  Contrary to other PyKota management tools, wildcard characters are not \n"
1072"  expanded, so you can't use them.\n"
1073"  \n"
1074"examples :\n"
1075"\n"
1076"  $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n"
1077"  \n"
1078"  Will generate a PDF document containing invoices for all users\n"
1079"  who have spent some credits last month. Invoices will be done in\n"
1080"  EURO.  No VAT information will be included.\n"
1081msgstr ""
1082
1083msgid "Invoice"
1084msgstr ""
1085
1086msgid "Edited on"
1087msgstr ""
1088
1089msgid "Number of jobs printed"
1090msgstr ""
1091
1092msgid "Number of pages printed"
1093msgstr ""
1094
1095msgid "Amount due"
1096msgstr ""
1097
1098msgid "Included VAT"
1099msgstr ""
1100
1101msgid "Here's the invoice for your printouts"
1102msgstr ""
1103
1104msgid "Generating invoices"
1105msgstr ""
1106
1107#, python-format
1108msgid "Incorrect value '%s' for the --vat command line option"
1109msgstr ""
1110
1111#, python-format
1112msgid "Incorrect value '%s' for the --number command line option"
1113msgstr ""
1114
1115#, python-format
1116msgid "Invalid filter value [%s], see help."
1117msgstr ""
1118
1119#, python-format
1120msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits"
1121msgstr ""
1122
1123msgid "Credits"
1124msgstr ""
1125
1126#, python-format
1127msgid ""
1128"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1129"\n"
1130"Email gateway for PyKota.\n"
1131"\n"
1132"command line usage :\n"
1133"\n"
1134"  pkmail  [options]\n"
1135"\n"
1136"options :\n"
1137"\n"
1138"  -v | --version       Prints pkmail's version number then exits.\n"
1139"  -h | --help          Prints this message then exits.\n"
1140"  \n"
1141"    \n"
1142"  This command is meant to be used from your mail server's aliases file,\n"
1143"  as a pipe. It will then accept commands send to it in email messages,\n"
1144"  and will send the answer to the command's originator.\n"
1145"  \n"
1146"  To use this command, create an email alias in /etc/aliases with\n"
1147"  the following format :\n"
1148"  \n"
1149"    pykotacmd: \"|/usr/bin/pkmail\"\n"
1150"    \n"
1151"  Then run the 'newaliases' command to regenerate the aliases database.\n"
1152"  \n"
1153"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
1154"  the command in the subject.\n"
1155"  \n"
1156"  List of supported commands :\n"
1157"  \n"
1158"        report [username]\n"
1159"  \n"
1160"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
1161"  system user in the 'pykota' system group to ensure this user can\n"
1162"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
1163"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
1164"  that you think at least twice before doing this though.\n"
1165"  \n"
1166"  Use at your own risk !\n"
1167msgstr ""
1168
1169msgid "Result of your commands"
1170msgstr ""
1171
1172#, python-format
1173msgid ""
1174"pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1175"\n"
1176"Notifies or ask questions to end users who launched the PyKotIcon "
1177"application.\n"
1178"\n"
1179"command line usage :\n"
1180"\n"
1181"  pknotify  [options]  [arguments]\n"
1182"\n"
1183"options :\n"
1184"\n"
1185"  -v | --version             Prints pknotify's version number then exits.\n"
1186"  -h | --help                Prints this message then exits.\n"
1187"  \n"
1188"  -d | --destination h[:p]   Sets the destination hostname and optional\n"
1189"                             port onto which contact the remote PyKotIcon\n"
1190"                             application. This option is mandatory.\n"
1191"                             When not specified, the port defaults to 7654.\n"
1192"                             \n"
1193"  -a | --ask                 Tells pknotify to ask something to the end\n"
1194"                             user. Then pknotify will output the result.\n"
1195"                       \n"
1196"  -C | --checkauth           When --ask is used and both an 'username' and "
1197"a\n"
1198"                             'password' are asked to the end user, then\n"
1199"                             pknotify will try to authenticate the user\n"
1200"                             through PAM. If authentified, this program\n"
1201"                             will print \"AUTH=YES\", else \"AUTH=NO\".\n"
1202"                             If a field is missing, \"AUTH=IMPOSSIBLE\" "
1203"will\n"
1204"                             be printed. If the user is authenticated, then\n"
1205"                             \"USERNAME=xxxx\" will be printed as well.\n"
1206"                             \n"
1207"  -c | --confirm             Tells pknotify to ask for either a "
1208"confirmation                       \n"
1209"                             or abortion.\n"
1210"                             \n"
1211"  -D | --denyafter N         With --checkauth above, makes pknotify "
1212"loop                           \n"
1213"                             up to N times if the password is incorrect.\n"
1214"                             After having reached the limit, \"DENY\" will\n"
1215"                             be printed, which effectively rejects the job.\n"
1216"                             The default value of N is 1, meaning the job\n"
1217"                             is denied after the first unsuccessful try.\n"
1218"                             \n"
1219"  -N | --noremote action     If it's impossible to connect to the remote\n"
1220"                             PyKotIcon machine, do this action instead.\n"
1221"                             Allowed actions are 'CONTINUE' and 'CANCEL', \n"
1222"                             which will respectively allow the processing\n"
1223"                             of the print job to continue, or the job to\n"
1224"                             be cancelled. The default value is CANCEL.\n"
1225"                             \n"
1226"  -n | --notify              Tells pknotify to send an informational "
1227"message\n"
1228"                             to the end user.\n"
1229"                             \n"
1230"  -q | --quit                Tells pknotify to send a message asking the\n"
1231"                             PyKotIcon application to exit. This option can\n"
1232"                             be combined with the other ones to make "
1233"PyKotIcon\n"
1234"                             exit after having sent the answer from the "
1235"dialog.\n"
1236"                             \n"
1237"  -t | --timeout T           Tells pknotify to ignore the end user's answer "
1238"if\n"
1239"                             it comes past T seconds after the dialog box "
1240"being\n"
1241"                             opened. The default value is 0 seconds, which \n"
1242"                             tells pknotify to wait indefinitely.\n"
1243"                             Use this option to avoid having an user who\n"
1244"                             leaved his computer stall a whole print queue.\n"
1245"                             \n"
1246"  You MUST specify either --ask, --confirm, --notify or --quit.\n"
1247"\n"
1248"  arguments :             \n"
1249"  \n"
1250"    -a | --ask : Several arguments are accepted, of the form\n"
1251"                 \"label:varname:defaultvalue\". The result will\n"
1252"                 be printed to stdout in the following format :\n"
1253"                 VAR1NAME=VAR1VALUE\n"
1254"                 VAR2NAME=VAR2VALUE\n"
1255"                 ...\n"
1256"                 If the dialog was cancelled, nothing will be\n"
1257"                 printed. If one of the varname is 'password'\n"
1258"                 then this field is asked as a password (you won't\n"
1259"                 see what you type in), and is NOT printed. Although\n"
1260"                 it is not printed, it will be used to check if\n"
1261"                 authentication is valid if you specify --checkauth.\n"
1262"                 \n"
1263"    -c | --confirm : A single argument is expected, representing the\n"
1264"                     message to display. If the dialog is confirmed\n"
1265"                     then pknotify will print OK, else CANCEL.\n"
1266"                     \n"
1267"    -n | --notify : A single argument is expected, representing "
1268"the                 \n"
1269"                    message to display. In this case pknotify will\n"
1270"                    always print OK.\n"
1271"                    \n"
1272"examples :                    \n"
1273"\n"
1274"  pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 "
1275"credits\"\n"
1276"  \n"
1277"  Would display the cost of the print job and asks for confirmation.\n"
1278"  If the end user doesn't have PyKotIcon running and accepting connections\n"
1279"  from the print server, PyKota will consider that the end user accepted\n"
1280"  to print this job.\n"
1281"  \n"
1282"  pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n"
1283"           --checkauth --ask \"Your name:username:\" \"Your password:"
1284"password:\"\n"
1285"           \n"
1286"  Asks an username and password, and checks if they are valid.         \n"
1287"  NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n"
1288"  only set if you launch pknotify from cupspykota through a directive\n"
1289"  in ~pykota/pykota.conf\n"
1290"  \n"
1291"  The TCP port you'll use must be reachable on the client from the\n"
1292"  print server.\n"
1293msgstr ""
1294
1295msgid "You MUST install PyPAM for this functionnality to work !"
1296msgstr ""
1297
1298#, python-format
1299msgid "Authentication error for user %s : %s"
1300msgstr ""
1301
1302#, python-format
1303msgid "Internal error : can't authenticate user %s"
1304msgstr ""
1305
1306#, python-format
1307msgid "Password correct for user %s"
1308msgstr ""
1309
1310#, python-format
1311msgid ""
1312"The end user at %s:%i didn't answer within %i seconds. The print job will be "
1313"cancelled."
1314msgstr ""
1315
1316#, python-format
1317msgid ""
1318"Are you sure that PyKotIcon is running and accepting incoming connections on "
1319"%s:%s ?"
1320msgstr ""
1321
1322msgid "Connection error"
1323msgstr ""
1324
1325msgid "some options are mandatory, see help."
1326msgstr ""
1327
1328msgid "incorrect value for the --noremote command line switch, see help."
1329msgstr ""
1330
1331msgid "some options require arguments, see help."
1332msgstr ""
1333
1334#, python-format
1335msgid ""
1336"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1337"\n"
1338"A Printers Manager for PyKota.\n"
1339"\n"
1340"command line usage :\n"
1341"\n"
1342"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
1343"\n"
1344"options :\n"
1345"\n"
1346"  -v | --version       Prints pkprinters's version number then exits.\n"
1347"  -h | --help          Prints this message then exits.\n"
1348"  \n"
1349"  -a | --add           Adds printers if they don't exist on the Quota \n"
1350"                       Storage Server. If they exist, they are modified\n"
1351"                       unless -s|--skipexisting is also used.\n"
1352"                       \n"
1353"  -d | --delete        Deletes printers from the quota storage.\n"
1354"  \n"
1355"  -D | --description d Adds a textual description to printers.\n"
1356"\n"
1357"  -C | --cups          Also modifies the DeviceURI in CUPS' printers.conf\n"
1358"\n"
1359"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
1360"                       Job price is optional.\n"
1361"                       If both are to be set, separate them with a comma.\n"
1362"                       Floating point and negative values are allowed.\n"
1363"  \n"
1364"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
1365"                       groups pg1, pg2, etc... which must already exist.\n"
1366"                       A printer group is just like a normal printer,\n"
1367"                       only that it is usually unknown from the printing\n"
1368"                       system. Create printer groups exactly the same\n"
1369"                       way that you create printers, then add other \n"
1370"                       printers to them with this option.\n"
1371"                       Accounting is done on a printer and on all\n"
1372"                       the printer groups it belongs to, quota checking\n"
1373"                       is done on a printer and on all the printer groups\n"
1374"                       it belongs to.\n"
1375"                       If the --remove option below is not used, the \n"
1376"                       default action is to add printers to the specified\n"
1377"                       printer groups.\n"
1378"                       \n"
1379"  -l | --list          List informations about the printer(s) and the\n"
1380"                       printers groups it is a member of.\n"
1381"                       \n"
1382"  -r | --remove        In combination with the --groups option "
1383"above,                       \n"
1384"                       remove printers from the specified printers groups.\n"
1385"                       \n"
1386"  -s | --skipexisting  In combination with the --add option above, tells\n"
1387"                       pkprinters to not modify existing printers.\n"
1388"                       \n"
1389"  -m | --maxjobsize s  Sets the maximum job size allowed on the printer\n"
1390"                       to s pages.\n"
1391"                       \n"
1392"  -p | --passthrough   Activate passthrough mode for the printer. In this\n"
1393"                       mode, users are allowed to print without any impact\n"
1394"                       on their quota or account balance.\n"
1395"                       \n"
1396"  -n | --nopassthrough Deactivate passthrough mode for the printer.\n"
1397"                       Without -p or -n, printers are created in \n"
1398"                       normal mode, i.e. no passthrough.\n"
1399"  \n"
1400"  printer1 through printerN can contain wildcards if the --add option \n"
1401"  is not set.\n"
1402"  \n"
1403"examples :                              \n"
1404"\n"
1405"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
1406"hp8000\n"
1407"  \n"
1408"  Will create three printers named hp2100, hp2200 and hp8000.\n"
1409"  Their price per page will be set at 0.05 unit, and their price\n"
1410"  per job will be set at 0.1 unit. Units are in your own currency,\n"
1411"  or whatever you want them to mean.\n"
1412"  All of their descriptions will be set to the string \"HP Printer\".\n"
1413"  If any of these printers already exists, it will also be modified \n"
1414"  unless the -s|--skipexisting command line option is also used.\n"
1415"            \n"
1416"  $ pkprinters --delete \"*\"\n"
1417"  \n"
1418"  This will completely delete all printers and associated quota "
1419"information,\n"
1420"  as well as their job history. USE WITH CARE !\n"
1421"  \n"
1422"  $ pkprinters --groups Laser,HP \"hp*\"\n"
1423"  \n"
1424"  This will put all printers which name matches \"hp*\" into printers "
1425"groups \n"
1426"  Laser and HP, which MUST already exist.\n"
1427"  \n"
1428"  $ pkprinters --groups LexMark --remove hp2200\n"
1429"  \n"
1430"  This will remove the hp2200 printer from the LexMark printer group.\n"
1431msgstr ""
1432
1433#, python-format
1434msgid "Passthrough mode : %s"
1435msgstr ""
1436
1437#, python-format
1438msgid "Routed through PyKota : %s"
1439msgstr ""
1440
1441msgid "YES"
1442msgstr ""
1443
1444msgid "NO"
1445msgstr ""
1446
1447msgid "in"
1448msgstr ""
1449
1450msgid "Rerouting printers to CUPS"
1451msgstr ""
1452
1453#, python-format
1454msgid "Invalid charge amount value %s"
1455msgstr ""
1456
1457#, python-format
1458msgid "Invalid maximum job size value %s"
1459msgstr ""
1460
1461#, python-format
1462msgid "Printer %s already exists, skipping."
1463msgstr ""
1464
1465#, python-format
1466msgid "Printer %s already exists, will be modified."
1467msgstr ""
1468
1469#, python-format
1470msgid "Invalid printer name %s"
1471msgstr ""
1472
1473msgid "You have to pass printer groups names on the command line"
1474msgstr ""
1475
1476msgid "You have to pass printer names on the command line"
1477msgstr ""
1478
1479#, python-format
1480msgid ""
1481"pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1482"\n"
1483"Refunds jobs.\n"
1484"\n"
1485"command line usage :\n"
1486"\n"
1487"  pkrefund [options] [filterexpr]\n"
1488"\n"
1489"options :\n"
1490"\n"
1491"  -v | --version       Prints pkrefund's version number then exits.\n"
1492"  -h | --help          Prints this message then exits.\n"
1493"  \n"
1494"  -f | --force         Doesn't ask for confirmation before refunding jobs.\n"
1495"  -r | --reason txt    Sets textual information to explain the refunding.\n"
1496"\n"
1497"  -l | --logo img      Use the image as the receipt's logo. The logo will\n"
1498"                       be drawn at the center top of the page. The default\n"
1499"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
1500"\n"
1501"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
1502"                       page sizes are recognized, like 'A4' or 'Letter'\n"
1503"                       to name a few. The default size is A4.\n"
1504"\n"
1505"  -n | --number N      Sets the number of the first receipt. This number\n"
1506"                       will automatically be incremented for each receipt.\n"
1507"\n"
1508"  -o | --output f.pdf  Defines the name of the PDF file which will contain\n"
1509"                       the receipts. If not set, then no PDF file will\n"
1510"                       be created. If set to '-', then --force is assumed,\n"
1511"                       and the PDF document is sent to standard output.\n"
1512"\n"
1513"  -u | --unit u        Defines the name of the unit to use on the receipts.\n"
1514"                       The default unit is 'Credits', optionally translated\n"
1515"                       to your native language if it is supported by "
1516"PyKota.\n"
1517"  \n"
1518"\n"
1519"  Use the filter expressions to extract only parts of the \n"
1520"  datas. Allowed filters are of the form :\n"
1521"                \n"
1522"         key=value\n"
1523"                         \n"
1524"  Allowed keys for now are :  \n"
1525"                       \n"
1526"         username       User's name\n"
1527"         printername    Printer's name\n"
1528"         hostname       Client's hostname\n"
1529"         jobid          Job's Id\n"
1530"         billingcode    Job's billing code\n"
1531"         start          Job's date of printing\n"
1532"         end            Job's date of printing\n"
1533"         \n"
1534"  Dates formatting with 'start' and 'end' filter keys :\n"
1535"  \n"
1536"    YYYY : year boundaries\n"
1537"    YYYYMM : month boundaries\n"
1538"    YYYYMMDD : day boundaries\n"
1539"    YYYYMMDDhh : hour boundaries\n"
1540"    YYYYMMDDhhmm : minute boundaries\n"
1541"    YYYYMMDDhhmmss : second boundaries\n"
1542"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
1543"15)\n"
1544"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
1545"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
1546"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
1547"\n"
1548"  'now' and 'today' are not exactly the same since today represents the "
1549"first\n"
1550"  or last second of the day depending on if it's used in a start= or end=\n"
1551"  date expression. The utility to be able to specify dates in the future is\n"
1552"  a question which remains to be answered :-)\n"
1553"  \n"
1554"  Contrary to other PyKota management tools, wildcard characters are not \n"
1555"  expanded, so you can't use them.\n"
1556"  \n"
1557"Examples :\n"
1558"\n"
1559"  $ pkrefund --output /tmp/receipts.pdf jobid=503\n"
1560"  \n"
1561"  This will refund all jobs which Id is 503. BEWARE : installing CUPS\n"
1562"  afresh will reset the first job id at 1, so you probably want to use\n"
1563"  a more precise filter as explained below. A confirmation will\n"
1564"  be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n"
1565"  will be created which will contain printable receipts.\n"
1566"  \n"
1567"  $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n"
1568"  \n"
1569"  Refunds all jobs which id is 503 but which were printed during the\n"
1570"  past week. The reason will be marked as being an hardware problem.\n"
1571"  \n"
1572"  $ pkrefund --force username=jerome printername=HP2100\n"
1573"  \n"
1574"  Refunds all jobs printed by user jerome on printer HP2100. No\n"
1575"  confirmation will be asked.\n"
1576"  \n"
1577"  $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n"
1578"  \n"
1579"  Refunds all jobs printed on printer HP2100 between February 1st 2006\n"
1580"  and yesterday. No confirmation will be asked.\n"
1581msgstr ""
1582
1583msgid "Refunding receipt"
1584msgstr ""
1585
1586msgid "Jobs refunded"
1587msgstr ""
1588
1589msgid "Pages refunded"
1590msgstr ""
1591
1592msgid "Amount refunded"
1593msgstr ""
1594
1595msgid "Reason"
1596msgstr ""
1597
1598msgid "Here's the receipt for the refunding of your print jobs"
1599msgstr ""
1600
1601msgid "Generating receipts"
1602msgstr ""
1603
1604msgid ""
1605"Refunding for no reason is forbidden. Please use the --reason command line "
1606"option."
1607msgstr ""
1608
1609msgid ""
1610"The PDF file containing the receipts will be sent to stdout. --force is "
1611"assumed."
1612msgstr ""
1613
1614#, python-format
1615msgid "Date : %s"
1616msgstr ""
1617
1618#, python-format
1619msgid "JobId : %s"
1620msgstr ""
1621
1622#, python-format
1623msgid "User : %s"
1624msgstr ""
1625
1626#, python-format
1627msgid "Printer : %s"
1628msgstr ""
1629
1630#, python-format
1631msgid "Billing code : %s"
1632msgstr ""
1633
1634#, python-format
1635msgid "Pages : %i"
1636msgstr ""
1637
1638#, python-format
1639msgid "Credits : %.3f"
1640msgstr ""
1641
1642#, python-format
1643msgid "Title : %s"
1644msgstr ""
1645
1646msgid "Refund (Y/N)"
1647msgstr ""
1648
1649msgid "Y"
1650msgstr ""
1651
1652msgid "N"
1653msgstr ""
1654
1655#, python-format
1656msgid "Refunded %i users for %i jobs, %i pages and %.3f credits"
1657msgstr ""
1658
1659#, python-format
1660msgid ""
1661"pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1662"\n"
1663"A turn key tool for PyKota. When launched, this command will initialize\n"
1664"PyKota's database with all existing print queues and some or all users.\n"
1665"For now, no prices or limits are set, so printing is fully accounted\n"
1666"for, but not limited. That's why you'll probably want to also use\n"
1667"edpykota once the database has been initialized.\n"
1668"\n"
1669"command line usage :\n"
1670"\n"
1671"  pkturnkey [options] [printqueues names]\n"
1672"\n"
1673"options :\n"
1674"\n"
1675"  -v | --version       Prints pkturnkey version number then exits.\n"
1676"  -h | --help          Prints this message then exits.\n"
1677"  \n"
1678"  -c | --doconf        Give hints about what to put into pykota.conf\n"
1679"  \n"
1680"  -d | --dousers       Manages users accounts as well.\n"
1681"  \n"
1682"  -D | --dogroups      Manages users groups as well.\n"
1683"                       Implies -d | --dousers.\n"
1684"  \n"
1685"  -e | --emptygroups   Includes empty groups.\n"
1686"  \n"
1687"  -f | --force         Modifies the database instead of printing what\n"
1688"                       it would do.\n"
1689"                       \n"
1690"  -u | --uidmin uid    Only adds users whose uid is greater than or equal "
1691"to\n"
1692"                       uid. You can pass an username there as well, and its\n"
1693"                       uid will be used automatically.\n"
1694"                       If not set, 0 will be used automatically.\n"
1695"                       Implies -d | --dousers.\n"
1696"                       \n"
1697"  -U | --uidmax uid    Only adds users whose uid is lesser than or equal to\n"
1698"                       uid. You can pass an username there as well, and its\n"
1699"                       uid will be used automatically.\n"
1700"                       If not set, a large value will be used "
1701"automatically.\n"
1702"                       Implies -d | --dousers.\n"
1703"\n"
1704"  -g | --gidmin gid    Only adds groups whose gid is greater than or equal "
1705"to\n"
1706"                       gid. You can pass a groupname there as well, and its\n"
1707"                       gid will be used automatically.\n"
1708"                       If not set, 0 will be used automatically.\n"
1709"                       Implies -D | --dogroups.\n"
1710"                       \n"
1711"  -G | --gidmax gid    Only adds groups whose gid is lesser than or equal "
1712"to\n"
1713"                       gid. You can pass a groupname there as well, and its\n"
1714"                       gid will be used automatically.\n"
1715"                       If not set, a large value will be used "
1716"automatically.\n"
1717"                       Implies -D | --dogroups.\n"
1718"\n"
1719"examples :                              \n"
1720"\n"
1721"  $ pkturnkey --dousers --uidmin jerome\n"
1722"\n"
1723"  Will simulate the initialization of PyKota's database will all existing\n"
1724"  printers and print accounts for all users whose uid is greater than\n"
1725"  or equal to jerome's one. Won't manage any users group.\n"
1726"  \n"
1727"  To REALLY initialize the database instead of simulating it, please\n"
1728"  use the -f | --force command line switch.\n"
1729"  \n"
1730"  You can limit the initialization to only a subset of the existing\n"
1731"  printers, by passing their names at the end of the command line.\n"
1732msgstr ""
1733
1734#, python-format
1735msgid ""
1736"Printer %s is not managed by PyKota yet. Please modify printers.conf and "
1737"restart CUPS."
1738msgstr ""
1739
1740msgid "Please be patient..."
1741msgstr ""
1742
1743msgid "Don't worry, the database WILL NOT BE MODIFIED."
1744msgstr ""
1745
1746msgid "Please WORRY NOW, the database WILL BE MODIFIED."
1747msgstr ""
1748
1749msgid "System users will have a print account as well !"
1750msgstr ""
1751
1752#, python-format
1753msgid "Unknown username %s : %s"
1754msgstr ""
1755
1756msgid "System groups will have a print account as well !"
1757msgstr ""
1758
1759#, python-format
1760msgid "Unknown groupname %s : %s"
1761msgstr ""
1762
1763msgid "Simulation terminated."
1764msgstr ""
1765
1766msgid "Database initialized !"
1767msgstr ""
1768
1769msgid "The --uidmin or --uidmax command line option implies --dousers as well."
1770msgstr ""
1771
1772msgid ""
1773"The --gidmin or --gidmax command line option implies --dogroups as well."
1774msgstr ""
1775
1776msgid "The --dogroups command line option implies --dousers as well."
1777msgstr ""
1778
1779#, python-format
1780msgid ""
1781"pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1782"\n"
1783"An Users and Groups Manager for PyKota.\n"
1784"\n"
1785"command line usage :\n"
1786"\n"
1787"  pkusers [options] user1 user2 user3 ... userN\n"
1788"  \n"
1789"or :  \n"
1790"\n"
1791"  pkusers --groups [options] group1 group2 group3 ... groupN\n"
1792"\n"
1793"options :\n"
1794"\n"
1795"  -v | --version       Prints pkusers's version number then exits.\n"
1796"  -h | --help          Prints this message then exits.\n"
1797"  \n"
1798"  -a | --add           Adds users if they don't exist on the database.\n"
1799"                       If they exist, they are modified unless\n"
1800"                       -s|--skipexisting is also used.\n"
1801"                       \n"
1802"  -d | --delete        Deletes users from the quota storage.\n"
1803"\n"
1804"  -e | --email addr    Sets the email address for the users.\n"
1805"                       If the addr parameter begins with @, then\n"
1806"                       the username is prepended to addr to form\n"
1807"                       a valid email address.\n"
1808"\n"
1809"  -D | --description d Adds a textual description to users or groups.\n"
1810"                       \n"
1811"  -g | --groups        Edit users groups instead of users.\n"
1812"                          \n"
1813"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
1814"                       when computing the cost of a print job. Positive or \n"
1815"                       negative floating point values are allowed,\n"
1816"                       this allows you to do some really creative\n"
1817"                       things like giving money to an user whenever\n"
1818"                       he prints. The number of pages in a print job\n"
1819"                       is not modified by this coefficient, only the\n"
1820"                       cost of the job for a particular user.\n"
1821"                       Only users have such a coefficient.\n"
1822"  \n"
1823"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
1824"                              listed, separated by commas. The groups\n"
1825"                              must already exist in the Quota Storage.\n"
1826"                       \n"
1827"  -L | --list          Lists users or groups.\n"
1828"  \n"
1829"  -l | --limitby l     Choose if the user/group is limited in "
1830"printing                     \n"
1831"                       by its account balance or by its page quota.\n"
1832"                       The default value is 'quota'. Allowed values\n"
1833"                       are 'quota' 'balance' 'noquota' 'noprint' \n"
1834"                       and 'nochange' :\n"
1835"                       \n"
1836"                         - quota : limit by number of pages per printer.\n"
1837"                         - balance : limit by number of credits in account.\n"
1838"                         - noquota : no limit, accounting still done.\n"
1839"                         - nochange : no limit, accounting not done. \n"
1840"                         - noprint : printing is denied. \n"
1841"                       NB : nochange and noprint are not supported for "
1842"groups.\n"
1843"                       \n"
1844"  -b | --balance b     Sets the user's account balance to "
1845"b.                     \n"
1846"                       Account balance may be increase or decreased\n"
1847"                       if b is prefixed with + or -.\n"
1848"                       WARNING : when decreasing account balance,\n"
1849"                       the total paid so far by the user is decreased\n"
1850"                       too.\n"
1851"                       Groups don't have a real balance, but the\n"
1852"                       sum of their users' account balance.\n"
1853"                       \n"
1854"  -C | --comment txt   Defines some informational text to be associated\n"
1855"                       with a change to an user's account balance.\n"
1856"                       Only meaningful if -b | --balance is also used.\n"
1857"                       \n"
1858"                       \n"
1859"  -r | --remove        In combination with the --ingroups option "
1860"above,                       \n"
1861"                       remove users from the specified users groups.\n"
1862"                       \n"
1863"  -s | --skipexisting  In combination with the --add option above, tells\n"
1864"                       pkusers to not modify existing users.\n"
1865"                       \n"
1866"  user1 through userN and group1 through groupN can use wildcards\n"
1867"  if the --add option is not set.\n"
1868"  \n"
1869"examples :                              \n"
1870"\n"
1871"  $ pkusers --add john paul george ringo/ringo@example.com\n"
1872"  \n"
1873"  This will add users john, paul, george and ringo to the quota\n"
1874"  database. User ringo's email address will also be set to \n"
1875"  'ringo@example.com'\n"
1876"  \n"
1877"  $ pkusers --ingroups coders,it jerome\n"
1878"  \n"
1879"  User jerome is put into the groups \"coders\" and \"it\" which must\n"
1880"  already exist in the quota database.\n"
1881"            \n"
1882"  $ pkusers --limitby balance jerome\n"
1883"  \n"
1884"  This will tell PyKota to limit jerome by his account's balance\n"
1885"  when printing.\n"
1886"  \n"
1887"  $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n"
1888"  \n"
1889"  This will increase jerome's account balance by 10.0 (in your\n"
1890"  own currency). You can decrease the account balance with a\n"
1891"  dash prefix, and set it to a fixed amount with no prefix.\n"
1892"  A comment will be stored for this balance change.\n"
1893"  \n"
1894"  $ pkusers --delete jerome rachel\n"
1895"  \n"
1896"  This will completely delete jerome and rachel from the quota\n"
1897"  database. All their quotas and jobs will be deleted too.\n"
1898"  \n"
1899"  $ pkusers --overcharge 2.5 poorstudent\n"
1900"  \n"
1901"  This will overcharge the poorstudent user by a factor of 2.5.\n"
1902"  \n"
1903"  $ pkusers --overcharge -1 jerome\n"
1904"  \n"
1905"  User jerome will actually earn money whenever he prints.\n"
1906"  \n"
1907"  $ pkusers --overcharge 0 boss\n"
1908"  \n"
1909"  User boss can print at will, it won't cost him anything because the\n"
1910"  cost of each print job will be multiplied by zero before charging\n"
1911"  his account.\n"
1912"\n"
1913"  $ pkusers --email @example.com\n"
1914"\n"
1915"  This will set the email address for each user to username@example.com\n"
1916msgstr ""
1917
1918#, python-format
1919msgid "Invalid email address %s"
1920msgstr ""
1921
1922#, python-format
1923msgid "There's no %s matching %s"
1924msgstr ""
1925
1926#, python-format
1927msgid "Limited by : %s"
1928msgstr ""
1929
1930#, python-format
1931msgid "Account balance : %.2f"
1932msgstr ""
1933
1934#, python-format
1935msgid "Total paid so far : %.2f"
1936msgstr ""
1937
1938#, python-format
1939msgid "Overcharging factor : %.2f"
1940msgstr ""
1941
1942#, python-format
1943msgid "Group balance : %.2f"
1944msgstr ""
1945
1946#, python-format
1947msgid "Invalid limitby value %s"
1948msgstr ""
1949
1950#, python-format
1951msgid "Invalid overcharge value %s"
1952msgstr ""
1953
1954#, python-format
1955msgid "Invalid balance value %s"
1956msgstr ""
1957
1958#, python-format
1959msgid "There's no users group matching %s"
1960msgstr ""
1961
1962#, python-format
1963msgid "Unknown group %s"
1964msgstr ""
1965
1966#, python-format
1967msgid "Unknown user %s"
1968msgstr ""
1969
1970#, python-format
1971msgid "%s %s already exists, skipping."
1972msgstr ""
1973
1974#, python-format
1975msgid "%s %s already exists, will be modified."
1976msgstr ""
1977
1978#, python-format
1979msgid "Invalid name %s"
1980msgstr ""
1981
1982msgid "You have to pass user groups names on the command line"
1983msgstr ""
1984
1985#, python-format
1986msgid ""
1987"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1988"\n"
1989"An OSD quota monitor for PyKota.\n"
1990"\n"
1991"command line usage :\n"
1992"\n"
1993"  pykosd [options]\n"
1994"\n"
1995"options :\n"
1996"\n"
1997"  -v | --version       Prints pykosd's version number then exits.\n"
1998"  -h | --help          Prints this message then exits.\n"
1999"  \n"
2000"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
2001"                       triplet, for example #FF0000 is 100%% red.\n"
2002"                       Defaults to 100%% green (#00FF00).\n"
2003"                       \n"
2004"  -d | --duration d    Sets the duration of the display in seconds. \n"
2005"                       Defaults to 3 seconds.\n"
2006"                       \n"
2007"  -f | --font f        Sets the font to use for "
2008"display.                      \n"
2009"                       Defaults to the Python OSD library's default.\n"
2010"  \n"
2011"  -l | --loop n        Sets the number of times the info will be displayed.\n"
2012"                       Defaults to 0, which means loop forever.\n"
2013"                       \n"
2014"  -s | --sleep s       Sets the sleeping duration between two displays \n"
2015"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
2016"                       \n"
2017"  \n"
2018"examples :                              \n"
2019"\n"
2020"  $ pykosd -s 60 --loop 5\n"
2021"  \n"
2022"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
2023"  and will last for 3 seconds (the default) each time. After five\n"
2024"  iterations, the program will exit.\n"
2025msgstr ""
2026
2027#, python-format
2028msgid "Invalid duration option %s"
2029msgstr ""
2030
2031#, python-format
2032msgid "Invalid loop option %s"
2033msgstr ""
2034
2035#, python-format
2036msgid "Invalid sleep option %s"
2037msgstr ""
2038
2039#, python-format
2040msgid "Invalid color option %s"
2041msgstr ""
2042
2043#, python-format
2044msgid "User %s doesn't exist in PyKota's database"
2045msgstr ""
2046
2047#, python-format
2048msgid "Pages used on %s : %s"
2049msgstr ""
2050
2051#, python-format
2052msgid "PyKota Units left : %.2f"
2053msgstr ""
2054
2055msgid "Printing denied."
2056msgstr ""
2057
2058msgid "Printing not limited."
2059msgstr ""
2060
2061msgid "Printing not limited, no accounting."
2062msgstr ""
2063
2064#, python-format
2065msgid ""
2066"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
2067"\n"
2068"Gives print quotes to users.\n"
2069"\n"
2070"command line usage :\n"
2071"\n"
2072"  pykotme  [options]  [files]\n"
2073"\n"
2074"options :\n"
2075"\n"
2076"  -v | --version       Prints pykotme's version number then exits.\n"
2077"  -h | --help          Prints this message then exits.\n"
2078"  \n"
2079"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
2080"                       use wildcards characters to select only\n"
2081"                       some printers. The default value is *, meaning\n"
2082"                       all printers.\n"
2083"                       You can specify several names or wildcards, \n"
2084"                       by separating them with commas.\n"
2085"  \n"
2086"examples :                              \n"
2087"\n"
2088"  $ pykotme --printer apple file1.ps file2.ps\n"
2089"  \n"
2090"  This will give a print quote to the current user. The quote will show\n"
2091"  the price and size of a job consisting in file1.ps and file2.ps \n"
2092"  which would be sent to the apple printer.\n"
2093"  \n"
2094"  $ pykotme --printer apple,hplaser <file1.ps\n"
2095"  \n"
2096"  This will give a print quote to the current user. The quote will show\n"
2097"  the price and size of a job consisting in file1.ps as read from\n"
2098"  standard input, which would be sent to the apple or hplaser\n"
2099"  printer.\n"
2100"\n"
2101"  $ pykotme \n"
2102"  \n"
2103"  This will give a quote for a job consisting of what is on standard \n"
2104"  input. The quote will list the job size, and the price the job\n"
2105"  would cost on each printer.\n"
2106msgstr ""
2107
2108#, python-format
2109msgid "Your account balance : %.2f"
2110msgstr ""
2111
2112#, python-format
2113msgid "Job size : %i pages"
2114msgstr ""
2115
2116#, python-format
2117msgid "Cost on printer %s : %.2f"
2118msgstr ""
2119
2120msgid "won't be charged, printer is in passthrough mode"
2121msgstr ""
2122
2123msgid "won't be charged, your account is immutable"
2124msgstr ""
2125
2126#, python-format
2127msgid "Unsupported accounter backend %s"
2128msgstr ""
2129
2130#, python-format
2131msgid ""
2132"Configuration file %s can't be read. Please check that the file exists and "
2133"that your permissions are sufficient."
2134msgstr ""
2135
2136#, python-format
2137msgid "Configuration file %s not found."
2138msgstr ""
2139
2140#, python-format
2141msgid "Option %s not found in section global of %s"
2142msgstr ""
2143
2144#, python-format
2145msgid "Option %s not found in section %s of %s"
2146msgstr ""
2147
2148#, python-format
2149msgid "Option ldaptls is set, but certificate %s is not readable."
2150msgstr ""
2151
2152#, python-format
2153msgid "Option logger only supports values in %s"
2154msgstr ""
2155
2156#, python-format
2157msgid "Invalid preaccounter %s for printer %s"
2158msgstr ""
2159
2160#, python-format
2161msgid "Option preaccounter in section %s only supports values in %s"
2162msgstr ""
2163
2164#, python-format
2165msgid "Invalid accounter %s for printer %s"
2166msgstr ""
2167
2168#, python-format
2169msgid "Option accounter in section %s only supports values in %s"
2170msgstr ""
2171
2172#, python-format
2173msgid "Invalid unknown_billingcode directive %s for printer %s"
2174msgstr ""
2175
2176#, python-format
2177msgid "Directive unknown_billingcode in section %s only supports values in %s"
2178msgstr ""
2179
2180#, python-format
2181msgid "Option enforcement in section %s only supports values in %s"
2182msgstr ""
2183
2184#, python-format
2185msgid ""
2186"Option onbackenderror in section %s only supports values 'charge', "
2187"'nocharge', and 'retry:num:delay'"
2188msgstr ""
2189
2190#, python-format
2191msgid "Option onaccountererror in section %s only supports values in %s"
2192msgstr ""
2193
2194#, python-format
2195msgid "Option policy in section %s only supports values in %s"
2196msgstr ""
2197
2198#, python-format
2199msgid "Invalid option mailto %s for printer %s"
2200msgstr ""
2201
2202#, python-format
2203msgid "Option mailto in section %s only supports values in %s"
2204msgstr ""
2205
2206#, python-format
2207msgid "Invalid maximal deny banners counter %s"
2208msgstr ""
2209
2210#, python-format
2211msgid "Invalid grace delay %s"
2212msgstr ""
2213
2214#, python-format
2215msgid "Invalid poor man's threshold %s"
2216msgstr ""
2217
2218#, python-format
2219msgid "Invalid balancezero value %s"
2220msgstr ""
2221
2222msgid ""
2223"Your Print Quota account balance is Low.\n"
2224"Soon you'll not be allowed to print anymore.\n"
2225"Please contact the Print Quota Administrator to solve the problem."
2226msgstr ""
2227
2228#, python-format
2229msgid ""
2230"You are not allowed to print anymore because\n"
2231"your Print Quota is exceeded on printer %s."
2232msgstr ""
2233
2234#, python-format
2235msgid ""
2236"You will soon be forbidden to print anymore because\n"
2237"your Print Quota is almost reached on printer %s."
2238msgstr ""
2239
2240#, python-format
2241msgid "Incorrect value %s for the duplicatesdelay directive in section %s"
2242msgstr ""
2243
2244#, python-format
2245msgid "Incorrect value %s for the noprintingmaxdelay directive in section %s"
2246msgstr ""
2247
2248#, python-format
2249msgid "Option accountbanner in section %s only supports values in %s"
2250msgstr ""
2251
2252#, python-format
2253msgid "Option trustjobsize for printer %s is incorrect"
2254msgstr ""
2255
2256msgid "History"
2257msgstr ""
2258
2259msgid "Users"
2260msgstr ""
2261
2262msgid "Groups"
2263msgstr ""
2264
2265msgid "Printers"
2266msgstr ""
2267
2268msgid "Users Print Quotas"
2269msgstr ""
2270
2271msgid "Users Groups Print Quotas"
2272msgstr ""
2273
2274msgid "History of Payments"
2275msgstr ""
2276
2277msgid "Printers Groups Membership"
2278msgstr ""
2279
2280msgid "Users Groups Membership"
2281msgstr ""
2282
2283msgid "Billing Codes"
2284msgstr ""
2285
2286msgid "All"
2287msgstr ""
2288
2289msgid "Comma Separated Values"
2290msgstr ""
2291
2292msgid "Semicolon Separated Values"
2293msgstr ""
2294
2295msgid "Tabulation Separated Values"
2296msgstr ""
2297
2298msgid "eXtensible Markup Language"
2299msgstr ""
2300
2301msgid "CUPS' page_log"
2302msgstr ""
2303
2304#, python-format
2305msgid "Invalid modifier [%s] for --data command line option, see help."
2306msgstr ""
2307
2308msgid ""
2309"Dumping all PyKota's datas forces format to XML, and disables --sum and "
2310"filters."
2311msgstr ""
2312
2313#, python-format
2314msgid "Invalid modifier [%s] for --format command line option, see help."
2315msgstr ""
2316
2317msgid "XML output is disabled because the jaxml module is not available."
2318msgstr ""
2319
2320#, python-format
2321msgid "Invalid data type [%s] for --sum command line option, see help."
2322msgstr ""
2323
2324msgid "PyKota data dumper failed : I/O error"
2325msgstr ""
2326
2327#, python-format
2328msgid "Unsupported logging subsystem %s"
2329msgstr ""
2330
2331#, python-format
2332msgid "Report for %s quota on printer %s"
2333msgstr ""
2334
2335#, python-format
2336msgid "Pages grace time: %i days"
2337msgstr ""
2338
2339#, python-format
2340msgid "Price per job: %.3f"
2341msgstr ""
2342
2343#, python-format
2344msgid "Price per page: %.3f"
2345msgstr ""
2346
2347msgid ""
2348"Group          overcharge   used    soft    hard    balance grace         "
2349"total       paid warn"
2350msgstr ""
2351
2352msgid ""
2353"User           overcharge   used    soft    hard    balance grace         "
2354"total       paid warn"
2355msgstr ""
2356
2357msgid "unknown"
2358msgstr ""
2359
2360#, python-format
2361msgid "Real : %s"
2362msgstr ""
2363
2364#, python-format
2365msgid "Total : %9i"
2366msgstr ""
2367
2368msgid "N/A"
2369msgstr ""
2370
2371#, python-format
2372msgid "Unsupported reporter backend %s"
2373msgstr ""
2374
2375#, python-format
2376msgid "Refunded %i pages and %.3f credits by %s (%s) on %s"
2377msgstr ""
2378
2379#, python-format
2380msgid "Unsupported quota storage backend %s"
2381msgstr ""
2382
2383msgid "Done"
2384msgstr ""
2385
2386msgid "Average speed"
2387msgstr ""
2388
2389msgid "entries per second"
2390msgstr ""
2391
2392#, python-format
2393msgid "Strange problem with uid(%s) : %s"
2394msgstr ""
2395
2396#, python-format
2397msgid "Running as user '%s'."
2398msgstr ""
2399
2400msgid "No user named 'pykota'. Not dropping priviledges."
2401msgstr ""
2402
2403#, python-format
2404msgid "Impossible to drop priviledges : %s"
2405msgstr ""
2406
2407msgid "Priviledges dropped. Now running as user 'pykota'."
2408msgstr ""
2409
2410#, python-format
2411msgid "Impossible to regain priviledges : %s"
2412msgstr ""
2413
2414msgid "Regained priviledges. Now running as root."
2415msgstr ""
2416
2417msgid "Please report bugs to :"
2418msgstr ""
2419
2420#, python-format
2421msgid ""
2422"\n"
2423"\n"
2424"Please contact your system administrator :\n"
2425"\n"
2426"\t%s - <%s>\n"
2427msgstr ""
2428
2429#, python-format
2430msgid "Unable to match user %s on printer %s, applying default policy (%s)"
2431msgstr ""
2432
2433#, python-format
2434msgid ""
2435"Unable to find user %s's account balance, applying default policy (%s) for "
2436"printer %s"
2437msgstr ""
2438
2439#, python-format
2440msgid "User %s will not be charged for printing."
2441msgstr ""
2442
2443#, python-format
2444msgid "Print Quota exceeded for group %s on printer %s"
2445msgstr ""
2446
2447msgid "Print Quota Exceeded"
2448msgstr ""
2449
2450#, python-format
2451msgid "Print Quota low for group %s on printer %s"
2452msgstr ""
2453
2454msgid "Print Quota Low"
2455msgstr ""
2456
2457#, python-format
2458msgid ""
2459"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
2460"double check /etc/pykota/pykota.conf : %s"
2461msgstr ""
2462
2463#, python-format
2464msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
2465msgstr ""
2466
2467#, python-format
2468msgid "Problem adding LDAP entry (%s, %s)"
2469msgstr ""
2470
2471#, python-format
2472msgid "Problem deleting LDAP entry (%s)"
2473msgstr ""
2474
2475#, python-format
2476msgid "Problem modifying LDAP entry (%s, %s)"
2477msgstr ""
2478
2479#, python-format
2480msgid ""
2481"No pykotaAccountBalance object found for user %s. Did you create LDAP "
2482"entries manually ?"
2483msgstr ""
2484
2485msgid "Hidden because of privacy concerns"
2486msgstr ""
2487
2488#, python-format
2489msgid ""
2490"Unable to find an existing objectClass %s entry with %s=%s to attach "
2491"pykotaAccount objectClass"
2492msgstr ""
2493
2494#, python-format
2495msgid "%s. A new entry will be created instead."
2496msgstr ""
2497
2498#, python-format
2499msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
2500msgstr ""
2501
2502msgid ""
2503"Your version of python-mysqldb is too old. Please install a newer release."
2504msgstr ""
2505
2506#, python-format
2507msgid "A problem occured while reading printer %s's internal page counter."
2508msgstr ""
2509
2510#, python-format
2511msgid "Retrieving printer %s's page counter from database instead."
2512msgstr ""
2513
2514#, python-format
2515msgid ""
2516"Couldn't retrieve printer %s's internal page counter either before or after "
2517"printing."
2518msgstr ""
2519
2520#, python-format
2521msgid "Job's size forced to 1 page for printer %s."
2522msgstr ""
2523
2524#, python-format
2525msgid "No previous job in database for printer %s."
2526msgstr ""
2527
2528#, python-format
2529msgid "Inconsistent values for printer %s's internal page counter."
2530msgstr ""
2531
2532#, python-format
2533msgid "Unknown printer address in HARDWARE(%s) for printer %s"
2534msgstr ""
2535
2536#, python-format
2537msgid "Launching HARDWARE(%s)..."
2538msgstr ""
2539
2540#, python-format
2541msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
2542msgstr ""
2543
2544#, python-format
2545msgid "Line [%s] skipped in accounter's output. Trying again..."
2546msgstr ""
2547
2548#, python-format
2549msgid "Hardware accounter %s exit code is %s"
2550msgstr ""
2551
2552#, python-format
2553msgid "Unable to query printer %s via HARDWARE(%s)"
2554msgstr ""
2555
2556#, python-format
2557msgid ""
2558"Unable to precompute the job's size and ink coverage with the generic PDL "
2559"analyzer : %s"
2560msgstr ""
2561
2562#, python-format
2563msgid "Problem during connection to %s:%s : %s"
2564msgstr ""
2565
2566#, python-format
2567msgid "Problem while sending PJL query to %s:%s : %s"
2568msgstr ""
2569
2570#, python-format
2571msgid "Problem while receiving PJL answer from %s:%s : %s"
2572msgstr ""
2573
2574#, python-format
2575msgid "Waiting for printer %s to be printing..."
2576msgstr ""
2577
2578#, python-format
2579msgid "Waiting for printer %s's idle status to stabilize..."
2580msgstr ""
2581
2582#, python-format
2583msgid ""
2584"PJL querying stage interrupted. Using latest value seen for internal page "
2585"counter (%s) on printer %s."
2586msgstr ""
2587
2588#, python-format
2589msgid ""
2590"SNMP querying stage interrupted. Using latest value seen for internal page "
2591"counter (%s) on printer %s."
2592msgstr ""
2593
2594#, python-format
2595msgid "Network error while doing SNMP queries on printer %s : %s"
2596msgstr ""
2597
2598#, python-format
2599msgid "SNMP message decoding error for printer %s : %s"
2600msgstr ""
2601
2602#, python-format
2603msgid "Problem encountered while doing SNMP queries on printer %s : %s"
2604msgstr ""
2605
2606#, python-format
2607msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
2608msgstr ""
2609
2610#, python-format
2611msgid "Launching SOFTWARE(%s)..."
2612msgstr ""
2613
2614#, python-format
2615msgid "Unable to compute job size with accounter %s"
2616msgstr ""
2617
2618#, python-format
2619msgid "Problem while waiting for software accounter pid %s to exit : %s"
2620msgstr ""
2621
2622#, python-format
2623msgid "Software accounter %s exit code is %s"
2624msgstr ""
2625
2626msgid "Totals may be inaccurate if some users are members of several groups."
2627msgstr ""
2628
2629msgid "PyKota Data Dumper"
2630msgstr ""
2631
2632msgid "Dump"
2633msgstr ""
2634
2635msgid "Please click on the above button"
2636msgstr ""
2637
2638msgid "Data Type"
2639msgstr ""
2640
2641msgid "Output Format"
2642msgstr ""
2643
2644msgid "Filter"
2645msgstr ""
2646
2647msgid "Summarize"
2648msgstr ""
2649
2650msgid "only for payments or history"
2651msgstr ""
2652
2653msgid "PyKota Reports"
2654msgstr ""
2655
2656msgid "Report"
2657msgstr ""
2658
2659msgid "Printer"
2660msgstr ""
2661
2662msgid "User / Group names mask"
2663msgstr ""
2664
2665msgid "Groups report"
2666msgstr ""
2667
2668msgid "Empty"
2669msgstr ""
2670
2671msgid "Action"
2672msgstr ""
2673
2674msgid "User"
2675msgstr ""
2676
2677msgid "Hostname"
2678msgstr ""
2679
2680msgid "JobId"
2681msgstr ""
2682
2683msgid "Number of pages"
2684msgstr ""
2685
2686msgid "Cost"
2687msgstr ""
2688
2689msgid "Copies"
2690msgstr ""
2691
2692msgid "Number of bytes"
2693msgstr ""
2694
2695msgid "Printer's internal counter"
2696msgstr ""
2697
2698msgid "Options"
2699msgstr ""
2700
2701msgid "MD5Sum"
2702msgstr ""
2703
2704msgid "Billing code"
2705msgstr ""
2706
2707msgid "Precomputed number of pages"
2708msgstr ""
2709
2710msgid "Precomputed cost"
2711msgstr ""
2712
2713msgid "Pages details"
2714msgstr ""
2715
2716msgid "(not supported yet)"
2717msgstr ""
2718
2719msgid "Previous page"
2720msgstr ""
2721
2722msgid "PyKota Quotes"
2723msgstr ""
2724
2725msgid "Quote"
2726msgstr ""
2727
2728msgid ""
2729"The exact cost of a print job can only be determined for a particular user. "
2730"Please retry while logged-in."
2731msgstr ""
2732
2733msgid "Ordering"
2734msgstr ""
Note: See TracBrowser for help on using the browser.