root / pykota / trunk / po / pt / pykota.po @ 3238

Revision 3211, 86.5 kB (checked in by jerome, 17 years ago)

Added missing ordering field for CGI data dumper...

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1# PyKota
2#
3# PyKota : Print Quotas for CUPS and LPRng
4#
5# (c) 2003, 2004, 2005, 2006, 2007 Jerome Alet <alet@librelogiciel.com>
6# This program is free software; you can redistribute it and/or modify
7# it under the terms of the GNU General Public License as published by
8# the Free Software Foundation; either version 2 of the License, or
9# (at your option) any later version.
10#
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14# GNU General Public License for more details.
15#
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
19#
20# $Id$
21#
22#
23msgid ""
24msgstr ""
25"Project-Id-Version: PyKota v1.20\n"
26"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
27"POT-Creation-Date: 2006-03-30 22:00+0200\n"
28"PO-Revision-Date: 2004-01-15 13:02+0100\n"
29"Last-Translator: Jerome Alet <alet@librelogiciel.com>\n"
30"Language-Team: Portugues <alet@librelogiciel.com>\n"
31"MIME-Version: 1.0\n"
32"Content-Type: text/plain; charset=ISO-8859-15\n"
33"Content-Transfer-Encoding: 8bit\n"
34
35#
36# NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY
37#
38msgid "ALLOW"
39msgstr ""
40
41msgid "DENY"
42msgstr ""
43
44msgid "CANCEL"
45msgstr ""
46
47msgid "PROBLEM"
48msgstr ""
49
50msgid "REFUND"
51msgstr ""
52
53#, python-format
54msgid ""
55"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
56"\n"
57"A tool to automate user account creation and initial balance setting.\n"
58"\n"
59"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
60"\n"
61"command line usage :\n"
62"\n"
63"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
64"  OF AN external policy IN pykota.conf\n"
65"  \n"
66"  autopykota { -i | --initbalance value } \n"
67"\n"
68"options :\n"
69"\n"
70"  -v | --version       Prints autopykota's version number then exits.\n"
71"  -h | --help          Prints this message then exits.\n"
72"  \n"
73"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
74"                       If the user already exists, actual balance is left\n"
75"                       unmodified. If unset, the default value is 0.\n"
76"\n"
77"  -e | --email addr    Sets the user's e-mail address.\n"
78"  \n"
79msgstr ""
80
81#, python-format
82msgid "SIGTERM received, job %s cancelled."
83msgstr "SIGTERM recebido, trabalho %s reiniciado."
84
85#, python-format
86msgid "Network error while querying the CUPS server : %s"
87msgstr ""
88
89msgid "You are not allowed to print at this time."
90msgstr ""
91
92msgid "Print job cancelled."
93msgstr ""
94
95msgid "Unlimited"
96msgstr ""
97
98msgid "ON"
99msgstr ""
100
101msgid "OFF"
102msgstr ""
103
104#, python-format
105msgid "Banner generator %s exit code is %s"
106msgstr ""
107
108msgid "Banner won't be printed : maximum number of deny banners reached."
109msgstr ""
110
111#, python-format
112msgid "Beware : computed job size (%s) != precomputed job size (%s)"
113msgstr ""
114
115msgid ""
116"The job size will be trusted anyway according to the 'trustjobsize' directive"
117msgstr ""
118
119#, python-format
120msgid ""
121"The job size will be trusted because it is inferior to the 'trustjobsize' "
122"directive's limit %s"
123msgstr ""
124
125#, python-format
126msgid ""
127"The job size will be modified according to the 'trustjobsize' directive : %s"
128msgstr ""
129
130#, python-format
131msgid ""
132"Printer %s not registered in the PyKota system, applying external policy (%"
133"s) for printer %s"
134msgstr ""
135"Impressora %s n�registada no sistema de impress� foi aplicada a pol�ca "
136"externa (%s) para a impressora %s"
137
138#, python-format
139msgid ""
140"User %s not registered in the PyKota system, applying external policy (%s) "
141"for printer %s"
142msgstr ""
143"Utilizador %s n�registado no sistema de impress� foi aplicada a pol�ca "
144"externa (%s) para a impressora %s"
145
146#, python-format
147msgid ""
148"User %s doesn't have quota on printer %s in the PyKota system, applying "
149"external policy (%s) for printer %s"
150msgstr ""
151"Utilizador %s n�tem cota na impressora %s, foi aplicada a pol�ca externa "
152"(%s) para a impressora %s"
153
154#, python-format
155msgid ""
156"External policy %s for printer %s produced an error. Job rejected. Please "
157"check PyKota's configuration files."
158msgstr ""
159"Pol�ca externa %s para a impressora %s devolveu um erro. Trabalho "
160"reiniciado. Por favor verifique os ficheiros de configura� do Pykota."
161
162#, python-format
163msgid ""
164"Printer %s not registered in the PyKota system, applying default policy (%s)"
165msgstr ""
166"Impressora %s n�registada no sistema Pykota, foi aplicada por omiss�a "
167"pol�ca (%s)"
168
169#, python-format
170msgid ""
171"User %s not registered in the PyKota system, applying default policy (%s) "
172"for printer %s"
173msgstr ""
174"Utilizador %s n�registrado no sistema PyKota, foi aplicada por omiss�a "
175"pol�ca (%s)para a impressora %s"
176
177#, python-format
178msgid ""
179"User %s doesn't have quota on printer %s in the PyKota system, applying "
180"default policy (%s)"
181msgstr ""
182"O utilizador %s n�tem cota na impressora %s, foi aplicada por omiss�a "
183"pol�ca (%s)"
184
185#, python-format
186msgid ""
187"Printer %s still not registered in the PyKota system, job will be rejected"
188msgstr ""
189"A Impressora %s n�se encontra registada no sistema, o pedido ser�ejeitado"
190
191#, python-format
192msgid ""
193"User %s still not registered in the PyKota system, job will be rejected on "
194"printer %s"
195msgstr ""
196"O utilizador %s n�se encontra registado no sistema, o pedido para a "
197"impressora %sser�ejeitado"
198
199#, python-format
200msgid ""
201"User %s still doesn't have quota on printer %s in the PyKota system, job "
202"will be rejected"
203msgstr ""
204"O utilizador %s ainda n�tem cota definida na impressora %s, o pedido ser�
205"rejeitado"
206
207msgid "Job is a dupe"
208msgstr ""
209
210msgid "Printing is denied by configuration"
211msgstr ""
212
213#, python-format
214msgid "Duplicate print jobs are not allowed on printer %s."
215msgstr ""
216
217msgid "Subprocess denied printing of a dupe"
218msgstr ""
219
220#, python-format
221msgid "Duplicate print jobs are not allowed on printer %s at this time."
222msgstr ""
223
224msgid "Subprocess allowed printing of a dupe"
225msgstr ""
226
227#, python-format
228msgid ""
229"\n"
230"\n"
231"Your system administrator :\n"
232"\n"
233"\t%s - <%s>\n"
234msgstr ""
235
236#, python-format
237msgid "Impossible to connect to SMTP server : %s"
238msgstr "N�foi poss�l conectar-se ao servidor SMTP %s"
239
240msgid "Print Quota"
241msgstr "Cota de Impress�
242
243#, python-format
244msgid "Impossible to send mail to %s, error %s : %s"
245msgstr "Imposs�l enviar email para  %s, erro %s : %s"
246
247#, python-format
248msgid "Problem when sending mail : %s"
249msgstr ""
250
251msgid "Job contains no data. Printing is denied."
252msgstr "Tarefa n�cont�nenhum dado. Impress�negada"
253
254msgid "Error in external policy script. Printing is denied."
255msgstr ""
256
257#, python-format
258msgid ""
259"Still no print quota entry for user %s on printer %s after external policy. "
260"Printing is denied."
261msgstr ""
262
263msgid "Printing is denied by printer policy."
264msgstr ""
265
266msgid "Job allowed by printer policy. No accounting will be done."
267msgstr ""
268
269#, python-format
270msgid "Invalid policy %s for printer %s"
271msgstr "Pol�ca %s inv�da para a impressora %s"
272
273#, python-format
274msgid "Precomputed job size (%s pages) too large for printer %s."
275msgstr ""
276
277#, python-format
278msgid "You are not allowed to print so many pages on printer %s at this time."
279msgstr ""
280
281#, python-format
282msgid "User %s is not allowed to print at this time."
283msgstr ""
284
285msgid "Your account settings forbid you to print at this time."
286msgstr ""
287
288#, python-format
289msgid "Print Quota exceeded for user %s on printer %s"
290msgstr "Cota de impress�excedida para o utilizador %s na impressora %s"
291
292#, python-format
293msgid "Print Quota low for user %s on printer %s"
294msgstr "Cota de impress�baixa para o utilizador %s na impressora %s"
295
296msgid "Job denied, no accounting will be done."
297msgstr ""
298
299msgid "Job cancelled, no accounting will be done."
300msgstr ""
301
302msgid "Job accounting begins."
303msgstr "In�o da contagem da tarefa."
304
305msgid "Job denied, no accounting has been done."
306msgstr ""
307
308msgid "Job cancelled, no accounting has been done."
309msgstr ""
310
311msgid "Job accounting ends."
312msgstr "Fim da contagem da tarefa."
313
314msgid ""
315"Job size forced to 0 because the real CUPS backend failed. No accounting "
316"will be done."
317msgstr ""
318
319msgid "The real CUPS backend failed, but the job will be accounted for anyway."
320msgstr ""
321
322msgid "Job size forced to 0 because printing is denied."
323msgstr "Tamanho da tarefa zerado porque a impress�foi negada"
324
325msgid "Job size forced to 0 because printing was cancelled."
326msgstr ""
327
328#, python-format
329msgid "Job size : %i"
330msgstr "Tamanho da tarefa : %i"
331
332#, python-format
333msgid "User %s's quota on printer %s won't be modified"
334msgstr ""
335
336#, python-format
337msgid "Updating user %s's quota on printer %s"
338msgstr "Atualizando cota do usu�o %s para a impressora %s"
339
340msgid "Job added to history."
341msgstr "Tarefa adicionada ao hist�o"
342
343#, python-format
344msgid "Billing code %s was updated."
345msgstr ""
346
347#, python-format
348msgid "Incorrect value for the 'onbackenderror' directive in section [%s]"
349msgstr ""
350
351#, python-format
352msgid "The real backend produced an error, we will try again in %s seconds."
353msgstr ""
354
355#, python-format
356msgid "Job %s interrupted by the administrator !"
357msgstr ""
358
359#, python-format
360msgid ""
361"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
362"\n"
363"Dumps PyKota database's content.\n"
364"\n"
365"command line usage :\n"
366"\n"
367"  dumpykota [options] [filterexpr]\n"
368"\n"
369"options :\n"
370"\n"
371"  -v | --version       Prints dumpykota's version number then exits.\n"
372"  -h | --help          Prints this message then exits.\n"
373"  \n"
374"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
375"                       \n"
376"                         - history : dumps the jobs history.\n"
377"                         - users : dumps users.\n"
378"                         - groups : dumps user groups.\n"
379"                         - printers : dump printers.\n"
380"                         - upquotas : dump user quotas.\n"
381"                         - gpquotas : dump user groups quotas.\n"
382"                         - payments : dumps user payments.\n"
383"                         - pmembers : dumps printer groups members.\n"
384"                         - umembers : dumps user groups members.\n"
385"                         - billingcodes : dumps billing codes.\n"
386"                         - all : dumps all PyKota datas. The output format\n"
387"                                 is always XML in this case.\n"
388"                         \n"
389"                       NB : the -d | --data command line option   \n"
390"                       is MANDATORY.\n"
391"  \n"
392"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
393"                       the format is to dump datas in the csv format (comma\n"
394"                       separated values). All data dumped is between double\n"
395"                       quotes. Allowed formats are :\n"
396"                       \n"
397"                         - csv : separate datas with commas\n"
398"                         - ssv : separate datas with semicolons\n"
399"                         - tsv : separate datas with tabs\n"
400"                         - xml : dump data as XML \n"
401"                         - cups : dump datas in CUPS' page_log format :\n"
402"                                  ONLY AVAILABLE WITH --data history\n"
403"                         \n"
404"  -o | --output fname  All datas will be dumped to the file instead of\n"
405"                       to the standard output. The special '-' filename\n"
406"                       is the default value and means stdout.\n"
407"                       WARNING : existing files are truncated !\n"
408"\n"
409"  -O | --orderby exp   Change the ordering or result. 'exp' is a comma\n"
410"                       separated list of ordering statements, for example\n"
411"                       '--orderby +username,-printername'. Not all "
412"expression\n"
413"                       values are meaningful, so using this command line \n"
414"                       switch is not recommanded if you don't know the \n"
415"                       exact layout of PyKota's database schema.\n"
416"                       \n"
417"  -s | --sum           Summarize the selected datas.\n"
418"                           ONLY AVAILABLE WITH --data history or payments\n"
419"\n"
420"  Use the filter expressions to extract only parts of the \n"
421"  datas. Allowed filters are of the form :\n"
422"                \n"
423"         key=value\n"
424"                         \n"
425"  Allowed keys for now are :  \n"
426"                       \n"
427"         username       User's name\n"
428"         groupname      Users group's name\n"
429"         printername    Printer's name\n"
430"         pgroupname     Printers group's name\n"
431"         hostname       Client's hostname\n"
432"         jobid          Job's Id\n"
433"         billingcode    Job's billing code\n"
434"         start          Job's date of printing\n"
435"         end            Job's date of printing\n"
436"         \n"
437"  Dates formatting with 'start' and 'end' filter keys :\n"
438"  \n"
439"    YYYY : year boundaries\n"
440"    YYYYMM : month boundaries\n"
441"    YYYYMMDD : day boundaries\n"
442"    YYYYMMDDhh : hour boundaries\n"
443"    YYYYMMDDhhmm : minute boundaries\n"
444"    YYYYMMDDhhmmss : second boundaries\n"
445"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
446"15)\n"
447"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
448"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
449"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
450"\n"
451"  'now' and 'today' are not exactly the same since today represents the "
452"first\n"
453"  or last second of the day depending on if it's used in a start= or end=\n"
454"  date expression. The utility to be able to specify dates in the future is\n"
455"  a question which remains to be answered :-)\n"
456"  \n"
457"  Contrary to other PyKota management tools, wildcard characters are not \n"
458"  expanded, so you can't use them.\n"
459"  \n"
460"  NB : not all keys are allowed for each data type, so the result may be \n"
461"  empty if you use a key not available for a particular data type.\n"
462"  \n"
463"Examples :\n"
464"\n"
465"  $ dumpykota --data history --format csv >myfile.csv\n"
466"  \n"
467"  This dumps the history in a comma separated values file, for possible\n"
468"  use in a spreadsheet.\n"
469"  \n"
470"  $ dumpykota --data users --format xml -o users.xml\n"
471"  \n"
472"  Dumps all users datas to the users.xml file.\n"
473"  \n"
474"  $ dumpykota --data history printername=HP2100 username=jerome\n"
475"  \n"
476"  Dumps the job history for user jerome on printer HP2100 only.\n"
477"  \n"
478"  $ dumpykota --data history start=200503 end=20050730234615\n"
479"  \n"
480"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
481"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
482msgstr ""
483
484msgid "The -d | --data command line option is mandatory, see help."
485msgstr ""
486
487#, python-format
488msgid ""
489"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
490"\n"
491"A Print Quota editor for PyKota.\n"
492"\n"
493"command line usage :\n"
494"\n"
495"  edpykota [options] user1 user2 ... userN\n"
496"  \n"
497"  edpykota [options] group1 group2 ... groupN\n"
498"\n"
499"options :\n"
500"\n"
501"  -v | --version       Prints edpykota's version number then exits.\n"
502"  -h | --help          Prints this message then exits.\n"
503"  \n"
504"  -a | --add           Adds users or groups print quota entries if\n"
505"                       they don't exist in database.\n"
506"                       \n"
507"  -d | --delete        Deletes users or groups print quota entries.\n"
508"                       Users or groups are never deleted, you have\n"
509"                       to use the pkusers command to delete them.\n"
510"                       The history will be purge from all matching\n"
511"                       jobs, unless -g | --groups is used.\n"
512"  \n"
513"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
514"                       use wildcards characters to select only\n"
515"                       some printers. The default value is *, meaning\n"
516"                       all printers. \n"
517"                       You can specify several names or wildcards, \n"
518"                       by separating them with commas.\n"
519"  \n"
520"  -g | --groups        Edit groups print quota entries instead of \n"
521"                       users print quota entries.\n"
522"                          \n"
523"  -L | --list          Lists users or groups print quota entries.\n"
524"  \n"
525"  -n | --noquota       Sets both soft and hard limits to None for users\n"
526"                       or groups print quota entries.\n"
527"  \n"
528"  -r | --reset         Resets the actual page counter for the user\n"
529"                       or group to zero on the specified printers. \n"
530"                       The life time page counter is kept unchanged.\n"
531"                       \n"
532"  -R | --hardreset     Resets the actual and life time page counters\n"
533"                       for the user or group to zero on the specified \n"
534"                       printers. This is a shortcut for '--used 0'.\n"
535"                       \n"
536"  -s | --skipexisting  In combination with the --add option above, tells\n"
537"                       edpykota to not modify existing print quota entries.\n"
538"                       \n"
539"  -S | --softlimit sl  Sets the quota soft limit to sl "
540"pages.                       \n"
541"  \n"
542"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
543"  \n"
544"  -I | --increase v    Increase existing Soft and Hard limits by the value\n"
545"                       of v. You can prefix v with + or -, if no sign is\n"
546"                       used, + is assumed.\n"
547"\n"
548"  -U | --used u        Sets the page counters for the user u pages on\n"
549"                       the selected printers. Doesn't work for groups, "
550"since\n"
551"                       their page counters are the sum of all their "
552"members'\n"
553"                       page counters.\n"
554"                       Useful for migrating users from a different system\n"
555"                       where they have already used some pages. Actual\n"
556"                       and Life Time page counters may be increased or "
557"decreased\n"
558"                       if u is prefixed with + or -.\n"
559"                       WARNING : BOTH page counters are modified in all "
560"cases,\n"
561"                       so be careful.\n"
562"                       NB : if u equals '0', then the action taken is\n"
563"                       the same as if --hardreset was used.\n"
564"\n"
565"  user1 through userN and group1 through groupN can use wildcards\n"
566"  if the --add option is not set.\n"
567"  \n"
568"examples :                              \n"
569"\n"
570"  $ edpykota --add john paul george ringo\n"
571"  \n"
572"  This will create print quota entries for users john, paul, george\n"
573"  and ringo on all printers. These print quota entries will have no\n"
574"  limit set.\n"
575"  \n"
576"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
577"  \n"
578"  This will set jerome's print quota on the lp printer to a soft limit\n"
579"  of 50 pages, and a hard limit of 60 pages. Both user jerome and\n"
580"  printer lp have been previously created with the pkusers and pkprinters\n"
581"  commands, respectively.\n"
582"\n"
583"  $ edpykota -g -S 500 -H 550 financial support            \n"
584"  \n"
585"  This will set print quota soft limit to 500 pages and hard limit\n"
586"  to 550 pages for groups financial and support on all printers.\n"
587"  \n"
588"  $ edpykota --reset jerome \"jo*\"\n"
589"  \n"
590"  This will reset jerome's page counter to zero on all printers, as\n"
591"  well as every user whose name begins with 'jo'.\n"
592"  Their life time page counter on each printer will be kept unchanged.\n"
593"  You can also reset the life time page counters by using the\n"
594"  --hardreset | -R command line option.\n"
595"  \n"
596"  $ edpykota --printer hpcolor --noquota jerome\n"
597"  \n"
598"  This will tell PyKota to not limit jerome when printing on the \n"
599"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
600"  accounting of the pages he prints will still be kept.\n"
601"  Print Quotas for jerome on other printers are unchanged.\n"
602"  \n"
603"  $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n"
604"  \n"
605"  This will delete users jerome and rachel's print quota\n"
606"  entries on all printers which name begin with 'HP' or\n"
607"  'XER'. The jobs printed by these users on these printers\n"
608"  will be deleted from the history.\n"
609msgstr ""
610
611#, python-format
612msgid "You can't set negative limits for %s"
613msgstr ""
614
615msgid "Extracting datas"
616msgstr ""
617
618#, python-format
619msgid "Page counter : %s"
620msgstr ""
621
622#, python-format
623msgid "Lifetime page counter : %s"
624msgstr ""
625
626#, python-format
627msgid "Soft limit : %s"
628msgstr ""
629
630#, python-format
631msgid "Hard limit : %s"
632msgstr ""
633
634#, python-format
635msgid "Date limit : %s"
636msgstr ""
637
638#, python-format
639msgid "Maximum job size : %s"
640msgstr ""
641
642#, python-format
643msgid "%s pages"
644msgstr ""
645
646#, python-format
647msgid "Warning banners printed : %s"
648msgstr ""
649
650msgid "Deletion"
651msgstr ""
652
653#, python-format
654msgid "Invalid used value %s."
655msgstr ""
656
657#, python-format
658msgid "Invalid increase value %s."
659msgstr ""
660
661#, python-format
662msgid "Invalid softlimit value %s."
663msgstr "Valor incorrecto para o limite m�mo %s."
664
665#, python-format
666msgid "Invalid hardlimit value %s."
667msgstr "Valor incorrecto para limite m�mo %s."
668
669#, python-format
670msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
671msgstr ""
672"Limite m�mo %i �enor que o limite m�mo %i, os valores ser�invertidos."
673
674#, python-format
675msgid "Undefined hard limit set to soft limit (%s)."
676msgstr ""
677
678#, python-format
679msgid "Undefined soft limit set to hard limit (%s)."
680msgstr ""
681
682msgid "Creation"
683msgstr ""
684
685#, python-format
686msgid "No entry matches %s. Please use pkusers to create them first."
687msgstr ""
688
689msgid "Modification"
690msgstr ""
691
692msgid "incompatible options, see help."
693msgstr "Op�s incompat�is, veja a ajuda."
694
695msgid "You have to pass user or group names on the command line"
696msgstr ""
697"�Obrigat� a utiliza� de nomes de utilizador ou grupo na linha de "
698"comando"
699
700#, python-format
701msgid ""
702"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
703"\n"
704"Generates print quota reports.\n"
705"\n"
706"command line usage :\n"
707"\n"
708"  repykota [options] \n"
709"\n"
710"options :\n"
711"\n"
712"  -v | --version       Prints repykota's version number then exits.\n"
713"  -h | --help          Prints this message then exits.\n"
714"  \n"
715"  -u | --users         Generates a report on users quota, this is \n"
716"                       the default.\n"
717"  \n"
718"  -g | --groups        Generates a report on group quota instead of users.\n"
719"  \n"
720"  -i | --ingroups g1[,g2...]  Only lists users who are members of these\n"
721"                              groups. Reserved to PyKota Administrators.\n"
722"  \n"
723"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
724"                       use wildcards characters to select only\n"
725"                       some printers. The default value is *, meaning\n"
726"                       all printers.\n"
727"                       You can specify several names or wildcards, \n"
728"                       by separating them with commas.\n"
729"  \n"
730"examples :                              \n"
731"\n"
732"  $ repykota --printer lp\n"
733"  \n"
734"  This will print the quota status for all users who use the lp printer.\n"
735"\n"
736"  $ repykota \n"
737"  \n"
738"  This will print the quota status for all users on all printers.\n"
739"  \n"
740"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
741"  \n"
742"  This will print the quota status for user jerome and all users\n"
743"  whose name begins with \"jo\" on all printers which name begins\n"
744"  with \"laser\" or ends with \"pson\".\n"
745"  \n"
746"  If launched by an user who is not a PyKota administrator, additionnal\n"
747"  arguments representing users or groups names are ignored, and only the\n"
748"  current user/group is reported.\n"
749msgstr ""
750
751msgid "Option --ingroups is reserved to PyKota Administrators."
752msgstr ""
753
754#, python-format
755msgid "There's no printer matching %s"
756msgstr "A impressora %s n�existe"
757
758#, python-format
759msgid ""
760"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
761"\n"
762"Sends mail to users over print quota.\n"
763"\n"
764"command line usage :\n"
765"\n"
766"  warnpykota  [options]  [names]\n"
767"\n"
768"options :\n"
769"\n"
770"  -v | --version       Prints warnpykota's version number then exits.\n"
771"  -h | --help          Prints this message then exits.\n"
772"  \n"
773"  -u | --users         Warns users over their print quota, this is the \n"
774"                       default.\n"
775"  \n"
776"  -g | --groups        Warns users whose groups quota are over limit.\n"
777"  \n"
778"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
779"                       use wildcards characters to select only\n"
780"                       some printers. The default value is *, meaning\n"
781"                       all printers.\n"
782"                       You can specify several names or wildcards, \n"
783"                       by separating them with commas.\n"
784"  \n"
785"examples :                              \n"
786"\n"
787"  $ warnpykota --printer lp\n"
788"  \n"
789"  This will warn all users of the lp printer who have exceeded their\n"
790"  print quota.\n"
791"\n"
792"  $ warnpykota \n"
793"  \n"
794"  This will warn all users  who have exceeded their print quota on\n"
795"  any printer.\n"
796"\n"
797"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
798"  \n"
799"  This will warn all users of groups which names begins with \"dev\" and\n"
800"  who have exceeded their print quota on any printer which name begins \n"
801"  with \"laserjet\"\n"
802"  \n"
803"  If launched by an user who is not a PyKota administrator, additionnal\n"
804"  arguments representing users or groups names are ignored, and only the\n"
805"  current user/group is reported.\n"
806msgstr ""
807
808#, python-format
809msgid ""
810"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
811"\n"
812"Generates banners.\n"
813"\n"
814"command line usage :\n"
815"\n"
816"  pkbanner  [options]  [more info]\n"
817"\n"
818"options :\n"
819"\n"
820"  -v | --version       Prints pkbanner's version number then exits.\n"
821"  -h | --help          Prints this message then exits.\n"
822"  \n"
823"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
824"                       be drawn at the center top of the page. The default\n"
825"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
826"                       \n"
827"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
828"                       page sizes are recognized, like 'A4' or 'Letter'\n"
829"                       to name a few. The default size is A4.\n"
830"  \n"
831"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
832"                       used to save toner. The default value is 0, which\n"
833"                       means that no toner saving will be done.\n"
834"  \n"
835"  -u | --url u         Uses u as an url to be written at the bottom of \n"
836"                       the banner page. The default url is :\n"
837"                       http://www.pykota.com/\n"
838"  \n"
839"examples :                              \n"
840"\n"
841"  Using pkbanner directly from the command line is not recommended,\n"
842"  excepted for testing purposes. You should use pkbanner in the\n"
843"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
844"  \n"
845"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
846"  \n"
847"      With such a setting in pykota.conf, all print jobs will be \n"
848"      prefixed with an A4 banner with no logo, and text luminosity will\n"
849"      be increased by 75%%. The PostScript output will be directly sent\n"
850"      to your printer.\n"
851"      \n"
852"  You'll find more examples in the sample configuration file included    \n"
853"  in PyKota.\n"
854msgstr ""
855
856msgid "Unknown"
857msgstr ""
858
859msgid "Username"
860msgstr ""
861
862msgid "More Info"
863msgstr ""
864
865msgid "Job"
866msgstr ""
867
868msgid "Date"
869msgstr "Data"
870
871msgid "Allowed"
872msgstr ""
873
874msgid "Denied"
875msgstr ""
876
877msgid "Allowed with Warning"
878msgstr ""
879
880msgid "Problem"
881msgstr ""
882
883msgid "Cancelled"
884msgstr ""
885
886msgid "Result"
887msgstr ""
888
889msgid "Title"
890msgstr "T�lo"
891
892msgid "Filename"
893msgstr "Nome do arquivo"
894
895#, python-format
896msgid "Pages printed so far on %s"
897msgstr ""
898
899msgid "Account balance"
900msgstr ""
901
902msgid "Soft Limit"
903msgstr ""
904
905msgid "Hard Limit"
906msgstr ""
907
908msgid "Date Limit"
909msgstr ""
910
911msgid "No Limit"
912msgstr ""
913
914msgid "No Accounting"
915msgstr ""
916
917msgid "Forbidden"
918msgstr ""
919
920msgid "Printing Mode"
921msgstr ""
922
923msgid "Allowed range is (0..99)"
924msgstr ""
925
926#, python-format
927msgid "Invalid 'savetoner' option %s : %s"
928msgstr ""
929
930#, python-format
931msgid "Invalid 'pagesize' option %s, defaulting to A4."
932msgstr ""
933
934#, python-format
935msgid ""
936"pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n"
937"\n"
938"A billing codes Manager for PyKota.\n"
939"\n"
940"command line usage :\n"
941"\n"
942"  pkbcodes [options] code1 code2 code3 ... codeN\n"
943"\n"
944"options :\n"
945"\n"
946"  -v | --version       Prints pkbcodes version number then exits.\n"
947"  -h | --help          Prints this message then exits.\n"
948"  \n"
949"  -a | --add           Adds billing codes if they don't exist in PyKota's\n"
950"                       database. If they exist, they are modified\n"
951"                       unless -s|--skipexisting is also used.\n"
952"\n"
953"  -d | --delete        Deletes billing codes from PyKota's database.\n"
954"                       NB : the history entries with this billing code\n"
955"                       are not deleted, voluntarily.\n"
956"\n"
957"  -D | --description d Adds a textual description to billing codes.\n"
958"\n"
959"  -l | --list          List informations about the billing codes.\n"
960"\n"
961"  -r | --reset         Resets the billing codes' balance and page counters\n"
962"                       to 0.\n"
963"\n"
964"  -s | --skipexisting  In combination with the --add option above, tells\n"
965"                       pkbcodes to not modify existing billing codes.\n"
966"\n"
967"  code1 through codeN can contain wildcards if the --add option\n"
968"  is not set.\n"
969"\n"
970"examples :                              \n"
971"\n"
972"  $ pkbcodes --add -D \"My project\" myproj\n"
973"\n"
974"  Will create the myproj billing code with \"My project\"\n"
975"  as the description.\n"
976"\n"
977"  $ pkbcodes --delete \"*\"\n"
978"\n"
979"  This will completely delete all the billing codes, but without\n"
980"  removing any matching job from the history. USE WITH CARE ANYWAY !\n"
981"  \n"
982"  $ pkbcodes --list \"my*\"\n"
983"  \n"
984"  This will list all billing codes which name begins with 'my'.\n"
985msgstr ""
986
987msgid "You're not allowed to use this command."
988msgstr ""
989
990#, python-format
991msgid "There's no billingcode matching %s"
992msgstr ""
993
994msgid "pages"
995msgstr ""
996
997msgid "and"
998msgstr ""
999
1000msgid "credits"
1001msgstr ""
1002
1003#, python-format
1004msgid "Billing code [%s] already exists, skipping."
1005msgstr ""
1006
1007#, python-format
1008msgid "Billing code [%s] already exists, will be modified."
1009msgstr ""
1010
1011msgid "You have to pass billing codes on the command line"
1012msgstr ""
1013
1014#, python-format
1015msgid ""
1016"pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1017"\n"
1018"An invoice generator for PyKota.\n"
1019"\n"
1020"command line usage :\n"
1021"\n"
1022"  pkinvoice [options] [filterexpr]\n"
1023"\n"
1024"options :\n"
1025"\n"
1026"  -v | --version       Prints pkinvoice's version number then exits.\n"
1027"  -h | --help          Prints this message then exits.\n"
1028"  \n"
1029"  -l | --logo img      Use the image as the invoice's logo. The logo will\n"
1030"                       be drawn at the center top of the page. The default\n"
1031"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
1032"                       \n"
1033"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
1034"                       page sizes are recognized, like 'A4' or 'Letter'\n"
1035"                       to name a few. The default size is A4.\n"
1036"                       \n"
1037"  -n | --number N      Sets the number of the first invoice. This number\n"
1038"                       will automatically be incremented for each invoice.\n"
1039"                       \n"
1040"  -o | --output f.pdf  Defines the name of the invoice file which will\n"
1041"                       be generated as a PDF document. If not set or\n"
1042"                       set to '-', the PDF document is sent to standard\n"
1043"                       output. \n"
1044"                       \n"
1045"  -u | --unit u        Defines the name of the unit to use on the "
1046"invoice.                       \n"
1047"                       The default unit is 'Credits', optionally translated\n"
1048"                       to your native language if it is supported by "
1049"PyKota.\n"
1050"  \n"
1051"  -V | --vat p         Sets the percent value of the applicable VAT to be\n"
1052"                       exposed. The default is 0.0, meaning no VAT\n"
1053"                       information will be included.\n"
1054"  \n"
1055"\n"
1056"  Use the filter expressions to extract only parts of the \n"
1057"  datas. Allowed filters are of the form :\n"
1058"                \n"
1059"         key=value\n"
1060"                         \n"
1061"  Allowed keys for now are :  \n"
1062"                       \n"
1063"         username       User's name\n"
1064"         printername    Printer's name\n"
1065"         hostname       Client's hostname\n"
1066"         jobid          Job's Id\n"
1067"         billingcode    Job's billing code\n"
1068"         start          Job's date of printing\n"
1069"         end            Job's date of printing\n"
1070"         \n"
1071"  Dates formatting with 'start' and 'end' filter keys :\n"
1072"  \n"
1073"    YYYY : year boundaries\n"
1074"    YYYYMM : month boundaries\n"
1075"    YYYYMMDD : day boundaries\n"
1076"    YYYYMMDDhh : hour boundaries\n"
1077"    YYYYMMDDhhmm : minute boundaries\n"
1078"    YYYYMMDDhhmmss : second boundaries\n"
1079"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
1080"15)\n"
1081"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
1082"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
1083"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
1084"\n"
1085"  'now' and 'today' are not exactly the same since today represents the "
1086"first\n"
1087"  or last second of the day depending on if it's used in a start= or end=\n"
1088"  date expression. The utility to be able to specify dates in the future is\n"
1089"  a question which remains to be answered :-)\n"
1090"  \n"
1091"  Contrary to other PyKota management tools, wildcard characters are not \n"
1092"  expanded, so you can't use them.\n"
1093"  \n"
1094"examples :\n"
1095"\n"
1096"  $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n"
1097"  \n"
1098"  Will generate a PDF document containing invoices for all users\n"
1099"  who have spent some credits last month. Invoices will be done in\n"
1100"  EURO.  No VAT information will be included.\n"
1101msgstr ""
1102
1103msgid "Invoice"
1104msgstr ""
1105
1106msgid "Edited on"
1107msgstr ""
1108
1109msgid "Number of jobs printed"
1110msgstr ""
1111
1112msgid "Number of pages printed"
1113msgstr ""
1114
1115msgid "Amount due"
1116msgstr ""
1117
1118msgid "Included VAT"
1119msgstr ""
1120
1121msgid "Here's the invoice for your printouts"
1122msgstr ""
1123
1124msgid "Generating invoices"
1125msgstr ""
1126
1127#, python-format
1128msgid "Incorrect value '%s' for the --vat command line option"
1129msgstr ""
1130
1131#, python-format
1132msgid "Incorrect value '%s' for the --number command line option"
1133msgstr ""
1134
1135#, python-format
1136msgid "Invalid filter value [%s], see help."
1137msgstr ""
1138
1139#, python-format
1140msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits"
1141msgstr ""
1142
1143msgid "Credits"
1144msgstr ""
1145
1146#, python-format
1147msgid ""
1148"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1149"\n"
1150"Email gateway for PyKota.\n"
1151"\n"
1152"command line usage :\n"
1153"\n"
1154"  pkmail  [options]\n"
1155"\n"
1156"options :\n"
1157"\n"
1158"  -v | --version       Prints pkmail's version number then exits.\n"
1159"  -h | --help          Prints this message then exits.\n"
1160"  \n"
1161"    \n"
1162"  This command is meant to be used from your mail server's aliases file,\n"
1163"  as a pipe. It will then accept commands send to it in email messages,\n"
1164"  and will send the answer to the command's originator.\n"
1165"  \n"
1166"  To use this command, create an email alias in /etc/aliases with\n"
1167"  the following format :\n"
1168"  \n"
1169"    pykotacmd: \"|/usr/bin/pkmail\"\n"
1170"    \n"
1171"  Then run the 'newaliases' command to regenerate the aliases database.\n"
1172"  \n"
1173"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
1174"  the command in the subject.\n"
1175"  \n"
1176"  List of supported commands :\n"
1177"  \n"
1178"        report [username]\n"
1179"  \n"
1180"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
1181"  system user in the 'pykota' system group to ensure this user can\n"
1182"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
1183"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
1184"  that you think at least twice before doing this though.\n"
1185"  \n"
1186"  Use at your own risk !\n"
1187msgstr ""
1188
1189msgid "Result of your commands"
1190msgstr ""
1191
1192#, python-format
1193msgid ""
1194"pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1195"\n"
1196"Notifies or ask questions to end users who launched the PyKotIcon "
1197"application.\n"
1198"\n"
1199"command line usage :\n"
1200"\n"
1201"  pknotify  [options]  [arguments]\n"
1202"\n"
1203"options :\n"
1204"\n"
1205"  -v | --version             Prints pknotify's version number then exits.\n"
1206"  -h | --help                Prints this message then exits.\n"
1207"  \n"
1208"  -d | --destination h[:p]   Sets the destination hostname and optional\n"
1209"                             port onto which contact the remote PyKotIcon\n"
1210"                             application. This option is mandatory.\n"
1211"                             When not specified, the port defaults to 7654.\n"
1212"                             \n"
1213"  -a | --ask                 Tells pknotify to ask something to the end\n"
1214"                             user. Then pknotify will output the result.\n"
1215"                       \n"
1216"  -C | --checkauth           When --ask is used and both an 'username' and "
1217"a\n"
1218"                             'password' are asked to the end user, then\n"
1219"                             pknotify will try to authenticate the user\n"
1220"                             through PAM. If authentified, this program\n"
1221"                             will print \"AUTH=YES\", else \"AUTH=NO\".\n"
1222"                             If a field is missing, \"AUTH=IMPOSSIBLE\" "
1223"will\n"
1224"                             be printed. If the user is authenticated, then\n"
1225"                             \"USERNAME=xxxx\" will be printed as well.\n"
1226"                             \n"
1227"  -c | --confirm             Tells pknotify to ask for either a "
1228"confirmation                       \n"
1229"                             or abortion.\n"
1230"                             \n"
1231"  -D | --denyafter N         With --checkauth above, makes pknotify "
1232"loop                           \n"
1233"                             up to N times if the password is incorrect.\n"
1234"                             After having reached the limit, \"DENY\" will\n"
1235"                             be printed, which effectively rejects the job.\n"
1236"                             The default value of N is 1, meaning the job\n"
1237"                             is denied after the first unsuccessful try.\n"
1238"                             \n"
1239"  -N | --noremote action     If it's impossible to connect to the remote\n"
1240"                             PyKotIcon machine, do this action instead.\n"
1241"                             Allowed actions are 'CONTINUE' and 'CANCEL', \n"
1242"                             which will respectively allow the processing\n"
1243"                             of the print job to continue, or the job to\n"
1244"                             be cancelled. The default value is CANCEL.\n"
1245"                             \n"
1246"  -n | --notify              Tells pknotify to send an informational "
1247"message\n"
1248"                             to the end user.\n"
1249"                             \n"
1250"  -q | --quit                Tells pknotify to send a message asking the\n"
1251"                             PyKotIcon application to exit. This option can\n"
1252"                             be combined with the other ones to make "
1253"PyKotIcon\n"
1254"                             exit after having sent the answer from the "
1255"dialog.\n"
1256"                             \n"
1257"  -t | --timeout T           Tells pknotify to ignore the end user's answer "
1258"if\n"
1259"                             it comes past T seconds after the dialog box "
1260"being\n"
1261"                             opened. The default value is 0 seconds, which \n"
1262"                             tells pknotify to wait indefinitely.\n"
1263"                             Use this option to avoid having an user who\n"
1264"                             leaved his computer stall a whole print queue.\n"
1265"                             \n"
1266"  You MUST specify either --ask, --confirm, --notify or --quit.\n"
1267"\n"
1268"  arguments :             \n"
1269"  \n"
1270"    -a | --ask : Several arguments are accepted, of the form\n"
1271"                 \"label:varname:defaultvalue\". The result will\n"
1272"                 be printed to stdout in the following format :\n"
1273"                 VAR1NAME=VAR1VALUE\n"
1274"                 VAR2NAME=VAR2VALUE\n"
1275"                 ...\n"
1276"                 If the dialog was cancelled, nothing will be\n"
1277"                 printed. If one of the varname is 'password'\n"
1278"                 then this field is asked as a password (you won't\n"
1279"                 see what you type in), and is NOT printed. Although\n"
1280"                 it is not printed, it will be used to check if\n"
1281"                 authentication is valid if you specify --checkauth.\n"
1282"                 \n"
1283"    -c | --confirm : A single argument is expected, representing the\n"
1284"                     message to display. If the dialog is confirmed\n"
1285"                     then pknotify will print OK, else CANCEL.\n"
1286"                     \n"
1287"    -n | --notify : A single argument is expected, representing "
1288"the                 \n"
1289"                    message to display. In this case pknotify will\n"
1290"                    always print OK.\n"
1291"                    \n"
1292"examples :                    \n"
1293"\n"
1294"  pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 "
1295"credits\"\n"
1296"  \n"
1297"  Would display the cost of the print job and asks for confirmation.\n"
1298"  If the end user doesn't have PyKotIcon running and accepting connections\n"
1299"  from the print server, PyKota will consider that the end user accepted\n"
1300"  to print this job.\n"
1301"  \n"
1302"  pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n"
1303"           --checkauth --ask \"Your name:username:\" \"Your password:"
1304"password:\"\n"
1305"           \n"
1306"  Asks an username and password, and checks if they are valid.         \n"
1307"  NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n"
1308"  only set if you launch pknotify from cupspykota through a directive\n"
1309"  in ~pykota/pykota.conf\n"
1310"  \n"
1311"  The TCP port you'll use must be reachable on the client from the\n"
1312"  print server.\n"
1313msgstr ""
1314
1315msgid "You MUST install PyPAM for this functionnality to work !"
1316msgstr ""
1317
1318#, python-format
1319msgid "Authentication error for user %s : %s"
1320msgstr ""
1321
1322#, python-format
1323msgid "Internal error : can't authenticate user %s"
1324msgstr ""
1325
1326#, python-format
1327msgid "Password correct for user %s"
1328msgstr ""
1329
1330#, python-format
1331msgid ""
1332"The end user at %s:%i didn't answer within %i seconds. The print job will be "
1333"cancelled."
1334msgstr ""
1335
1336#, python-format
1337msgid ""
1338"Are you sure that PyKotIcon is running and accepting incoming connections on "
1339"%s:%s ?"
1340msgstr ""
1341
1342msgid "Connection error"
1343msgstr ""
1344
1345msgid "some options are mandatory, see help."
1346msgstr ""
1347
1348msgid "incorrect value for the --noremote command line switch, see help."
1349msgstr ""
1350
1351msgid "some options require arguments, see help."
1352msgstr ""
1353
1354#, python-format
1355msgid ""
1356"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1357"\n"
1358"A Printers Manager for PyKota.\n"
1359"\n"
1360"command line usage :\n"
1361"\n"
1362"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
1363"\n"
1364"options :\n"
1365"\n"
1366"  -v | --version       Prints pkprinters's version number then exits.\n"
1367"  -h | --help          Prints this message then exits.\n"
1368"  \n"
1369"  -a | --add           Adds printers if they don't exist on the Quota \n"
1370"                       Storage Server. If they exist, they are modified\n"
1371"                       unless -s|--skipexisting is also used.\n"
1372"                       \n"
1373"  -d | --delete        Deletes printers from the quota storage.\n"
1374"  \n"
1375"  -D | --description d Adds a textual description to printers.\n"
1376"\n"
1377"  -C | --cups          Also modifies the DeviceURI in CUPS' printers.conf\n"
1378"\n"
1379"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
1380"                       Job price is optional.\n"
1381"                       If both are to be set, separate them with a comma.\n"
1382"                       Floating point and negative values are allowed.\n"
1383"  \n"
1384"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
1385"                       groups pg1, pg2, etc... which must already exist.\n"
1386"                       A printer group is just like a normal printer,\n"
1387"                       only that it is usually unknown from the printing\n"
1388"                       system. Create printer groups exactly the same\n"
1389"                       way that you create printers, then add other \n"
1390"                       printers to them with this option.\n"
1391"                       Accounting is done on a printer and on all\n"
1392"                       the printer groups it belongs to, quota checking\n"
1393"                       is done on a printer and on all the printer groups\n"
1394"                       it belongs to.\n"
1395"                       If the --remove option below is not used, the \n"
1396"                       default action is to add printers to the specified\n"
1397"                       printer groups.\n"
1398"                       \n"
1399"  -l | --list          List informations about the printer(s) and the\n"
1400"                       printers groups it is a member of.\n"
1401"                       \n"
1402"  -r | --remove        In combination with the --groups option "
1403"above,                       \n"
1404"                       remove printers from the specified printers groups.\n"
1405"                       \n"
1406"  -s | --skipexisting  In combination with the --add option above, tells\n"
1407"                       pkprinters to not modify existing printers.\n"
1408"                       \n"
1409"  -m | --maxjobsize s  Sets the maximum job size allowed on the printer\n"
1410"                       to s pages.\n"
1411"                       \n"
1412"  -p | --passthrough   Activate passthrough mode for the printer. In this\n"
1413"                       mode, users are allowed to print without any impact\n"
1414"                       on their quota or account balance.\n"
1415"                       \n"
1416"  -n | --nopassthrough Deactivate passthrough mode for the printer.\n"
1417"                       Without -p or -n, printers are created in \n"
1418"                       normal mode, i.e. no passthrough.\n"
1419"  \n"
1420"  printer1 through printerN can contain wildcards if the --add option \n"
1421"  is not set.\n"
1422"  \n"
1423"examples :                              \n"
1424"\n"
1425"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
1426"hp8000\n"
1427"  \n"
1428"  Will create three printers named hp2100, hp2200 and hp8000.\n"
1429"  Their price per page will be set at 0.05 unit, and their price\n"
1430"  per job will be set at 0.1 unit. Units are in your own currency,\n"
1431"  or whatever you want them to mean.\n"
1432"  All of their descriptions will be set to the string \"HP Printer\".\n"
1433"  If any of these printers already exists, it will also be modified \n"
1434"  unless the -s|--skipexisting command line option is also used.\n"
1435"            \n"
1436"  $ pkprinters --delete \"*\"\n"
1437"  \n"
1438"  This will completely delete all printers and associated quota "
1439"information,\n"
1440"  as well as their job history. USE WITH CARE !\n"
1441"  \n"
1442"  $ pkprinters --groups Laser,HP \"hp*\"\n"
1443"  \n"
1444"  This will put all printers which name matches \"hp*\" into printers "
1445"groups \n"
1446"  Laser and HP, which MUST already exist.\n"
1447"  \n"
1448"  $ pkprinters --groups LexMark --remove hp2200\n"
1449"  \n"
1450"  This will remove the hp2200 printer from the LexMark printer group.\n"
1451msgstr ""
1452
1453#, python-format
1454msgid "Passthrough mode : %s"
1455msgstr ""
1456
1457#, python-format
1458msgid "Routed through PyKota : %s"
1459msgstr ""
1460
1461msgid "YES"
1462msgstr ""
1463
1464msgid "NO"
1465msgstr ""
1466
1467msgid "in"
1468msgstr "em"
1469
1470msgid "Rerouting printers to CUPS"
1471msgstr ""
1472
1473#, python-format
1474msgid "Invalid charge amount value %s"
1475msgstr "Valor de custo inv�do %s"
1476
1477#, python-format
1478msgid "Invalid maximum job size value %s"
1479msgstr ""
1480
1481#, python-format
1482msgid "Printer %s already exists, skipping."
1483msgstr "Impressora %s j�xiste. Ignorando."
1484
1485#, python-format
1486msgid "Printer %s already exists, will be modified."
1487msgstr "Impressora %s j�xiste. Ser�eita uma modifica�."
1488
1489#, python-format
1490msgid "Invalid printer name %s"
1491msgstr "Nome de impressora %s inv�do"
1492
1493msgid "You have to pass printer groups names on the command line"
1494msgstr ""
1495"voc�eve passar os nomes dos grupos de impressoras na linha de comando"
1496
1497msgid "You have to pass printer names on the command line"
1498msgstr "�Obrigat� a utiliza� de nomes de impressora na linha de comando"
1499
1500#, python-format
1501msgid ""
1502"pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1503"\n"
1504"Refunds jobs.\n"
1505"\n"
1506"command line usage :\n"
1507"\n"
1508"  pkrefund [options] [filterexpr]\n"
1509"\n"
1510"options :\n"
1511"\n"
1512"  -v | --version       Prints pkrefund's version number then exits.\n"
1513"  -h | --help          Prints this message then exits.\n"
1514"  \n"
1515"  -f | --force         Doesn't ask for confirmation before refunding jobs.\n"
1516"  -r | --reason txt    Sets textual information to explain the refunding.\n"
1517"\n"
1518"  -l | --logo img      Use the image as the receipt's logo. The logo will\n"
1519"                       be drawn at the center top of the page. The default\n"
1520"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
1521"\n"
1522"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
1523"                       page sizes are recognized, like 'A4' or 'Letter'\n"
1524"                       to name a few. The default size is A4.\n"
1525"\n"
1526"  -n | --number N      Sets the number of the first receipt. This number\n"
1527"                       will automatically be incremented for each receipt.\n"
1528"\n"
1529"  -o | --output f.pdf  Defines the name of the PDF file which will contain\n"
1530"                       the receipts. If not set, then no PDF file will\n"
1531"                       be created. If set to '-', then --force is assumed,\n"
1532"                       and the PDF document is sent to standard output.\n"
1533"\n"
1534"  -u | --unit u        Defines the name of the unit to use on the receipts.\n"
1535"                       The default unit is 'Credits', optionally translated\n"
1536"                       to your native language if it is supported by "
1537"PyKota.\n"
1538"  \n"
1539"\n"
1540"  Use the filter expressions to extract only parts of the \n"
1541"  datas. Allowed filters are of the form :\n"
1542"                \n"
1543"         key=value\n"
1544"                         \n"
1545"  Allowed keys for now are :  \n"
1546"                       \n"
1547"         username       User's name\n"
1548"         printername    Printer's name\n"
1549"         hostname       Client's hostname\n"
1550"         jobid          Job's Id\n"
1551"         billingcode    Job's billing code\n"
1552"         start          Job's date of printing\n"
1553"         end            Job's date of printing\n"
1554"         \n"
1555"  Dates formatting with 'start' and 'end' filter keys :\n"
1556"  \n"
1557"    YYYY : year boundaries\n"
1558"    YYYYMM : month boundaries\n"
1559"    YYYYMMDD : day boundaries\n"
1560"    YYYYMMDDhh : hour boundaries\n"
1561"    YYYYMMDDhhmm : minute boundaries\n"
1562"    YYYYMMDDhhmmss : second boundaries\n"
1563"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
1564"15)\n"
1565"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
1566"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
1567"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
1568"\n"
1569"  'now' and 'today' are not exactly the same since today represents the "
1570"first\n"
1571"  or last second of the day depending on if it's used in a start= or end=\n"
1572"  date expression. The utility to be able to specify dates in the future is\n"
1573"  a question which remains to be answered :-)\n"
1574"  \n"
1575"  Contrary to other PyKota management tools, wildcard characters are not \n"
1576"  expanded, so you can't use them.\n"
1577"  \n"
1578"Examples :\n"
1579"\n"
1580"  $ pkrefund --output /tmp/receipts.pdf jobid=503\n"
1581"  \n"
1582"  This will refund all jobs which Id is 503. BEWARE : installing CUPS\n"
1583"  afresh will reset the first job id at 1, so you probably want to use\n"
1584"  a more precise filter as explained below. A confirmation will\n"
1585"  be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n"
1586"  will be created which will contain printable receipts.\n"
1587"  \n"
1588"  $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n"
1589"  \n"
1590"  Refunds all jobs which id is 503 but which were printed during the\n"
1591"  past week. The reason will be marked as being an hardware problem.\n"
1592"  \n"
1593"  $ pkrefund --force username=jerome printername=HP2100\n"
1594"  \n"
1595"  Refunds all jobs printed by user jerome on printer HP2100. No\n"
1596"  confirmation will be asked.\n"
1597"  \n"
1598"  $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n"
1599"  \n"
1600"  Refunds all jobs printed on printer HP2100 between February 1st 2006\n"
1601"  and yesterday. No confirmation will be asked.\n"
1602msgstr ""
1603
1604msgid "Refunding receipt"
1605msgstr ""
1606
1607msgid "Jobs refunded"
1608msgstr ""
1609
1610msgid "Pages refunded"
1611msgstr ""
1612
1613msgid "Amount refunded"
1614msgstr ""
1615
1616msgid "Reason"
1617msgstr ""
1618
1619msgid "Here's the receipt for the refunding of your print jobs"
1620msgstr ""
1621
1622msgid "Generating receipts"
1623msgstr ""
1624
1625msgid ""
1626"Refunding for no reason is forbidden. Please use the --reason command line "
1627"option."
1628msgstr ""
1629
1630msgid ""
1631"The PDF file containing the receipts will be sent to stdout. --force is "
1632"assumed."
1633msgstr ""
1634
1635#, python-format
1636msgid "Date : %s"
1637msgstr ""
1638
1639#, python-format
1640msgid "JobId : %s"
1641msgstr ""
1642
1643#, python-format
1644msgid "User : %s"
1645msgstr ""
1646
1647#, python-format
1648msgid "Printer : %s"
1649msgstr ""
1650
1651#, python-format
1652msgid "Billing code : %s"
1653msgstr ""
1654
1655#, python-format
1656msgid "Pages : %i"
1657msgstr ""
1658
1659#, python-format
1660msgid "Credits : %.3f"
1661msgstr ""
1662
1663#, python-format
1664msgid "Title : %s"
1665msgstr ""
1666
1667msgid "Refund (Y/N)"
1668msgstr ""
1669
1670msgid "Y"
1671msgstr ""
1672
1673msgid "N"
1674msgstr ""
1675
1676#, python-format
1677msgid "Refunded %i users for %i jobs, %i pages and %.3f credits"
1678msgstr ""
1679
1680#, python-format
1681msgid ""
1682"pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1683"\n"
1684"A turn key tool for PyKota. When launched, this command will initialize\n"
1685"PyKota's database with all existing print queues and some or all users.\n"
1686"For now, no prices or limits are set, so printing is fully accounted\n"
1687"for, but not limited. That's why you'll probably want to also use\n"
1688"edpykota once the database has been initialized.\n"
1689"\n"
1690"command line usage :\n"
1691"\n"
1692"  pkturnkey [options] [printqueues names]\n"
1693"\n"
1694"options :\n"
1695"\n"
1696"  -v | --version       Prints pkturnkey version number then exits.\n"
1697"  -h | --help          Prints this message then exits.\n"
1698"  \n"
1699"  -c | --doconf        Give hints about what to put into pykota.conf\n"
1700"  \n"
1701"  -d | --dousers       Manages users accounts as well.\n"
1702"  \n"
1703"  -D | --dogroups      Manages users groups as well.\n"
1704"                       Implies -d | --dousers.\n"
1705"  \n"
1706"  -e | --emptygroups   Includes empty groups.\n"
1707"  \n"
1708"  -f | --force         Modifies the database instead of printing what\n"
1709"                       it would do.\n"
1710"                       \n"
1711"  -u | --uidmin uid    Only adds users whose uid is greater than or equal "
1712"to\n"
1713"                       uid. You can pass an username there as well, and its\n"
1714"                       uid will be used automatically.\n"
1715"                       If not set, 0 will be used automatically.\n"
1716"                       Implies -d | --dousers.\n"
1717"                       \n"
1718"  -U | --uidmax uid    Only adds users whose uid is lesser than or equal to\n"
1719"                       uid. You can pass an username there as well, and its\n"
1720"                       uid will be used automatically.\n"
1721"                       If not set, a large value will be used "
1722"automatically.\n"
1723"                       Implies -d | --dousers.\n"
1724"\n"
1725"  -g | --gidmin gid    Only adds groups whose gid is greater than or equal "
1726"to\n"
1727"                       gid. You can pass a groupname there as well, and its\n"
1728"                       gid will be used automatically.\n"
1729"                       If not set, 0 will be used automatically.\n"
1730"                       Implies -D | --dogroups.\n"
1731"                       \n"
1732"  -G | --gidmax gid    Only adds groups whose gid is lesser than or equal "
1733"to\n"
1734"                       gid. You can pass a groupname there as well, and its\n"
1735"                       gid will be used automatically.\n"
1736"                       If not set, a large value will be used "
1737"automatically.\n"
1738"                       Implies -D | --dogroups.\n"
1739"\n"
1740"examples :                              \n"
1741"\n"
1742"  $ pkturnkey --dousers --uidmin jerome\n"
1743"\n"
1744"  Will simulate the initialization of PyKota's database will all existing\n"
1745"  printers and print accounts for all users whose uid is greater than\n"
1746"  or equal to jerome's one. Won't manage any users group.\n"
1747"  \n"
1748"  To REALLY initialize the database instead of simulating it, please\n"
1749"  use the -f | --force command line switch.\n"
1750"  \n"
1751"  You can limit the initialization to only a subset of the existing\n"
1752"  printers, by passing their names at the end of the command line.\n"
1753msgstr ""
1754
1755#, python-format
1756msgid ""
1757"Printer %s is not managed by PyKota yet. Please modify printers.conf and "
1758"restart CUPS."
1759msgstr ""
1760
1761msgid "Please be patient..."
1762msgstr ""
1763
1764msgid "Don't worry, the database WILL NOT BE MODIFIED."
1765msgstr ""
1766
1767msgid "Please WORRY NOW, the database WILL BE MODIFIED."
1768msgstr ""
1769
1770msgid "System users will have a print account as well !"
1771msgstr ""
1772
1773#, python-format
1774msgid "Unknown username %s : %s"
1775msgstr ""
1776
1777msgid "System groups will have a print account as well !"
1778msgstr ""
1779
1780#, python-format
1781msgid "Unknown groupname %s : %s"
1782msgstr ""
1783
1784msgid "Simulation terminated."
1785msgstr ""
1786
1787msgid "Database initialized !"
1788msgstr ""
1789
1790msgid "The --uidmin or --uidmax command line option implies --dousers as well."
1791msgstr ""
1792
1793msgid ""
1794"The --gidmin or --gidmax command line option implies --dogroups as well."
1795msgstr ""
1796
1797msgid "The --dogroups command line option implies --dousers as well."
1798msgstr ""
1799
1800#, python-format
1801msgid ""
1802"pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1803"\n"
1804"An Users and Groups Manager for PyKota.\n"
1805"\n"
1806"command line usage :\n"
1807"\n"
1808"  pkusers [options] user1 user2 user3 ... userN\n"
1809"  \n"
1810"or :  \n"
1811"\n"
1812"  pkusers --groups [options] group1 group2 group3 ... groupN\n"
1813"\n"
1814"options :\n"
1815"\n"
1816"  -v | --version       Prints pkusers's version number then exits.\n"
1817"  -h | --help          Prints this message then exits.\n"
1818"  \n"
1819"  -a | --add           Adds users if they don't exist on the database.\n"
1820"                       If they exist, they are modified unless\n"
1821"                       -s|--skipexisting is also used.\n"
1822"                       \n"
1823"  -d | --delete        Deletes users from the quota storage.\n"
1824"\n"
1825"  -e | --email addr    Sets the email address for the users.\n"
1826"                       If the addr parameter begins with @, then\n"
1827"                       the username is prepended to addr to form\n"
1828"                       a valid email address.\n"
1829"\n"
1830"  -D | --description d Adds a textual description to users or groups.\n"
1831"                       \n"
1832"  -g | --groups        Edit users groups instead of users.\n"
1833"                          \n"
1834"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
1835"                       when computing the cost of a print job. Positive or \n"
1836"                       negative floating point values are allowed,\n"
1837"                       this allows you to do some really creative\n"
1838"                       things like giving money to an user whenever\n"
1839"                       he prints. The number of pages in a print job\n"
1840"                       is not modified by this coefficient, only the\n"
1841"                       cost of the job for a particular user.\n"
1842"                       Only users have such a coefficient.\n"
1843"  \n"
1844"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
1845"                              listed, separated by commas. The groups\n"
1846"                              must already exist in the Quota Storage.\n"
1847"                       \n"
1848"  -L | --list          Lists users or groups.\n"
1849"  \n"
1850"  -l | --limitby l     Choose if the user/group is limited in "
1851"printing                     \n"
1852"                       by its account balance or by its page quota.\n"
1853"                       The default value is 'quota'. Allowed values\n"
1854"                       are 'quota' 'balance' 'noquota' 'noprint' \n"
1855"                       and 'nochange' :\n"
1856"                       \n"
1857"                         - quota : limit by number of pages per printer.\n"
1858"                         - balance : limit by number of credits in account.\n"
1859"                         - noquota : no limit, accounting still done.\n"
1860"                         - nochange : no limit, accounting not done. \n"
1861"                         - noprint : printing is denied. \n"
1862"                       NB : nochange and noprint are not supported for "
1863"groups.\n"
1864"                       \n"
1865"  -b | --balance b     Sets the user's account balance to "
1866"b.                     \n"
1867"                       Account balance may be increase or decreased\n"
1868"                       if b is prefixed with + or -.\n"
1869"                       WARNING : when decreasing account balance,\n"
1870"                       the total paid so far by the user is decreased\n"
1871"                       too.\n"
1872"                       Groups don't have a real balance, but the\n"
1873"                       sum of their users' account balance.\n"
1874"                       \n"
1875"  -C | --comment txt   Defines some informational text to be associated\n"
1876"                       with a change to an user's account balance.\n"
1877"                       Only meaningful if -b | --balance is also used.\n"
1878"                       \n"
1879"                       \n"
1880"  -r | --remove        In combination with the --ingroups option "
1881"above,                       \n"
1882"                       remove users from the specified users groups.\n"
1883"                       \n"
1884"  -s | --skipexisting  In combination with the --add option above, tells\n"
1885"                       pkusers to not modify existing users.\n"
1886"                       \n"
1887"  user1 through userN and group1 through groupN can use wildcards\n"
1888"  if the --add option is not set.\n"
1889"  \n"
1890"examples :                              \n"
1891"\n"
1892"  $ pkusers --add john paul george ringo/ringo@example.com\n"
1893"  \n"
1894"  This will add users john, paul, george and ringo to the quota\n"
1895"  database. User ringo's email address will also be set to \n"
1896"  'ringo@example.com'\n"
1897"  \n"
1898"  $ pkusers --ingroups coders,it jerome\n"
1899"  \n"
1900"  User jerome is put into the groups \"coders\" and \"it\" which must\n"
1901"  already exist in the quota database.\n"
1902"            \n"
1903"  $ pkusers --limitby balance jerome\n"
1904"  \n"
1905"  This will tell PyKota to limit jerome by his account's balance\n"
1906"  when printing.\n"
1907"  \n"
1908"  $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n"
1909"  \n"
1910"  This will increase jerome's account balance by 10.0 (in your\n"
1911"  own currency). You can decrease the account balance with a\n"
1912"  dash prefix, and set it to a fixed amount with no prefix.\n"
1913"  A comment will be stored for this balance change.\n"
1914"  \n"
1915"  $ pkusers --delete jerome rachel\n"
1916"  \n"
1917"  This will completely delete jerome and rachel from the quota\n"
1918"  database. All their quotas and jobs will be deleted too.\n"
1919"  \n"
1920"  $ pkusers --overcharge 2.5 poorstudent\n"
1921"  \n"
1922"  This will overcharge the poorstudent user by a factor of 2.5.\n"
1923"  \n"
1924"  $ pkusers --overcharge -1 jerome\n"
1925"  \n"
1926"  User jerome will actually earn money whenever he prints.\n"
1927"  \n"
1928"  $ pkusers --overcharge 0 boss\n"
1929"  \n"
1930"  User boss can print at will, it won't cost him anything because the\n"
1931"  cost of each print job will be multiplied by zero before charging\n"
1932"  his account.\n"
1933"\n"
1934"  $ pkusers --email @example.com\n"
1935"\n"
1936"  This will set the email address for each user to username@example.com\n"
1937msgstr ""
1938
1939#, python-format
1940msgid "Invalid email address %s"
1941msgstr "Endere�email inv�do"
1942
1943#, python-format
1944msgid "There's no %s matching %s"
1945msgstr ""
1946
1947#, python-format
1948msgid "Limited by : %s"
1949msgstr ""
1950
1951#, python-format
1952msgid "Account balance : %.2f"
1953msgstr ""
1954
1955#, python-format
1956msgid "Total paid so far : %.2f"
1957msgstr ""
1958
1959#, python-format
1960msgid "Overcharging factor : %.2f"
1961msgstr ""
1962
1963#, python-format
1964msgid "Group balance : %.2f"
1965msgstr ""
1966
1967#, python-format
1968msgid "Invalid limitby value %s"
1969msgstr "Valor inv�do para pol�ca de quota %s"
1970
1971#, python-format
1972msgid "Invalid overcharge value %s"
1973msgstr ""
1974
1975#, python-format
1976msgid "Invalid balance value %s"
1977msgstr "Valor de saldo inv�do %s"
1978
1979#, python-format
1980msgid "There's no users group matching %s"
1981msgstr ""
1982
1983#, python-format
1984msgid "Unknown group %s"
1985msgstr ""
1986
1987#, python-format
1988msgid "Unknown user %s"
1989msgstr ""
1990
1991#, python-format
1992msgid "%s %s already exists, skipping."
1993msgstr ""
1994
1995#, python-format
1996msgid "%s %s already exists, will be modified."
1997msgstr ""
1998
1999#, python-format
2000msgid "Invalid name %s"
2001msgstr ""
2002
2003msgid "You have to pass user groups names on the command line"
2004msgstr ""
2005
2006#, python-format
2007msgid ""
2008"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
2009"\n"
2010"An OSD quota monitor for PyKota.\n"
2011"\n"
2012"command line usage :\n"
2013"\n"
2014"  pykosd [options]\n"
2015"\n"
2016"options :\n"
2017"\n"
2018"  -v | --version       Prints pykosd's version number then exits.\n"
2019"  -h | --help          Prints this message then exits.\n"
2020"  \n"
2021"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
2022"                       triplet, for example #FF0000 is 100%% red.\n"
2023"                       Defaults to 100%% green (#00FF00).\n"
2024"                       \n"
2025"  -d | --duration d    Sets the duration of the display in seconds. \n"
2026"                       Defaults to 3 seconds.\n"
2027"                       \n"
2028"  -f | --font f        Sets the font to use for "
2029"display.                      \n"
2030"                       Defaults to the Python OSD library's default.\n"
2031"  \n"
2032"  -l | --loop n        Sets the number of times the info will be displayed.\n"
2033"                       Defaults to 0, which means loop forever.\n"
2034"                       \n"
2035"  -s | --sleep s       Sets the sleeping duration between two displays \n"
2036"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
2037"                       \n"
2038"  \n"
2039"examples :                              \n"
2040"\n"
2041"  $ pykosd -s 60 --loop 5\n"
2042"  \n"
2043"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
2044"  and will last for 3 seconds (the default) each time. After five\n"
2045"  iterations, the program will exit.\n"
2046msgstr ""
2047
2048#, python-format
2049msgid "Invalid duration option %s"
2050msgstr "Op� %s inv�da para dura�"
2051
2052#, python-format
2053msgid "Invalid loop option %s"
2054msgstr "Op� %s inv�da para loop (la�"
2055
2056#, python-format
2057msgid "Invalid sleep option %s"
2058msgstr "Op� %s inv�da para sleep (sono)"
2059
2060#, python-format
2061msgid "Invalid color option %s"
2062msgstr "Op� %s inv�da para color (cor)"
2063
2064#, python-format
2065msgid "User %s doesn't exist in PyKota's database"
2066msgstr "Usu�o %s n�existe na base de dados do Pykota"
2067
2068#, python-format
2069msgid "Pages used on %s : %s"
2070msgstr "P�nas usadas em %s : %s"
2071
2072#, python-format
2073msgid "PyKota Units left : %.2f"
2074msgstr "Unidades restantes do PyKota : %.2f"
2075
2076msgid "Printing denied."
2077msgstr ""
2078
2079msgid "Printing not limited."
2080msgstr ""
2081
2082msgid "Printing not limited, no accounting."
2083msgstr ""
2084
2085#, python-format
2086msgid ""
2087"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
2088"\n"
2089"Gives print quotes to users.\n"
2090"\n"
2091"command line usage :\n"
2092"\n"
2093"  pykotme  [options]  [files]\n"
2094"\n"
2095"options :\n"
2096"\n"
2097"  -v | --version       Prints pykotme's version number then exits.\n"
2098"  -h | --help          Prints this message then exits.\n"
2099"  \n"
2100"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
2101"                       use wildcards characters to select only\n"
2102"                       some printers. The default value is *, meaning\n"
2103"                       all printers.\n"
2104"                       You can specify several names or wildcards, \n"
2105"                       by separating them with commas.\n"
2106"  \n"
2107"examples :                              \n"
2108"\n"
2109"  $ pykotme --printer apple file1.ps file2.ps\n"
2110"  \n"
2111"  This will give a print quote to the current user. The quote will show\n"
2112"  the price and size of a job consisting in file1.ps and file2.ps \n"
2113"  which would be sent to the apple printer.\n"
2114"  \n"
2115"  $ pykotme --printer apple,hplaser <file1.ps\n"
2116"  \n"
2117"  This will give a print quote to the current user. The quote will show\n"
2118"  the price and size of a job consisting in file1.ps as read from\n"
2119"  standard input, which would be sent to the apple or hplaser\n"
2120"  printer.\n"
2121"\n"
2122"  $ pykotme \n"
2123"  \n"
2124"  This will give a quote for a job consisting of what is on standard \n"
2125"  input. The quote will list the job size, and the price the job\n"
2126"  would cost on each printer.\n"
2127msgstr ""
2128
2129#, python-format
2130msgid "Your account balance : %.2f"
2131msgstr "Saldo da sua conta : %.2f"
2132
2133#, python-format
2134msgid "Job size : %i pages"
2135msgstr "Tamanho do pedido : %i p�nas"
2136
2137#, python-format
2138msgid "Cost on printer %s : %.2f"
2139msgstr "Custo da impressora %s : %.2f"
2140
2141msgid "won't be charged, printer is in passthrough mode"
2142msgstr ""
2143
2144msgid "won't be charged, your account is immutable"
2145msgstr ""
2146
2147#, python-format
2148msgid "Unsupported accounter backend %s"
2149msgstr "Backend de cota %s n�suportado"
2150
2151#, python-format
2152msgid ""
2153"Configuration file %s can't be read. Please check that the file exists and "
2154"that your permissions are sufficient."
2155msgstr ""
2156
2157#, python-format
2158msgid "Configuration file %s not found."
2159msgstr "Ficheiro de configura� %s n�encontrado."
2160
2161#, python-format
2162msgid "Option %s not found in section global of %s"
2163msgstr "A op� %s n�foi encontrada na sec� global de %s"
2164
2165#, python-format
2166msgid "Option %s not found in section %s of %s"
2167msgstr "A op� %s n�foi encontrada na sec� %s de %s"
2168
2169#, python-format
2170msgid "Option ldaptls is set, but certificate %s is not readable."
2171msgstr ""
2172
2173#, python-format
2174msgid "Option logger only supports values in %s"
2175msgstr "A op� logger s�porta valores em %s"
2176
2177#, python-format
2178msgid "Invalid preaccounter %s for printer %s"
2179msgstr ""
2180
2181#, python-format
2182msgid "Option preaccounter in section %s only supports values in %s"
2183msgstr ""
2184
2185#, python-format
2186msgid "Invalid accounter %s for printer %s"
2187msgstr "Contador de p�nas %s inv�do, para a impressora %s"
2188
2189#, python-format
2190msgid "Option accounter in section %s only supports values in %s"
2191msgstr "A op� accounter na sec� %s s�porta valores em %s"
2192
2193#, python-format
2194msgid "Invalid unknown_billingcode directive %s for printer %s"
2195msgstr ""
2196
2197#, python-format
2198msgid "Directive unknown_billingcode in section %s only supports values in %s"
2199msgstr ""
2200
2201#, python-format
2202msgid "Option enforcement in section %s only supports values in %s"
2203msgstr "Op� enforcement (refor� na se� %s s�porta valores em %s"
2204
2205#, python-format
2206msgid ""
2207"Option onbackenderror in section %s only supports values 'charge', "
2208"'nocharge', and 'retry:num:delay'"
2209msgstr ""
2210
2211#, python-format
2212msgid "Option onaccountererror in section %s only supports values in %s"
2213msgstr ""
2214
2215#, python-format
2216msgid "Option policy in section %s only supports values in %s"
2217msgstr "A op� policy na sec� %s s�porta valores em %s"
2218
2219#, python-format
2220msgid "Invalid option mailto %s for printer %s"
2221msgstr "Op� mailto %s inv�da, para a impressora %s"
2222
2223#, python-format
2224msgid "Option mailto in section %s only supports values in %s"
2225msgstr "a op� mailto na sec� %s s�porta valores em %s"
2226
2227#, python-format
2228msgid "Invalid maximal deny banners counter %s"
2229msgstr ""
2230
2231#, python-format
2232msgid "Invalid grace delay %s"
2233msgstr "Per�o de toler�ia inv�do %s"
2234
2235#, python-format
2236msgid "Invalid poor man's threshold %s"
2237msgstr "Valor 'poor man' %s inv�do"
2238
2239#, python-format
2240msgid "Invalid balancezero value %s"
2241msgstr ""
2242
2243msgid ""
2244"Your Print Quota account balance is Low.\n"
2245"Soon you'll not be allowed to print anymore.\n"
2246"Please contact the Print Quota Administrator to solve the problem."
2247msgstr ""
2248"O seu saldo de impress��aixo.\n"
2249"Em breve n�poder�mprimir.\n"
2250"Por favor contacte o administrador do servi�de impress�de forma a "
2251"resolver o problema."
2252
2253#, python-format
2254msgid ""
2255"You are not allowed to print anymore because\n"
2256"your Print Quota is exceeded on printer %s."
2257msgstr ""
2258"Foi-lhe vedado o acesso ao servi�de impress�j�ue a\n"
2259"sua quota de impress�foi excedida, na impressora %s."
2260
2261#, python-format
2262msgid ""
2263"You will soon be forbidden to print anymore because\n"
2264"your Print Quota is almost reached on printer %s."
2265msgstr ""
2266"Em breve n�poder�mprimir j�ue a\n"
2267"sua quota de impress�est�uase a ser atingida, na impressora %s."
2268
2269#, python-format
2270msgid "Incorrect value %s for the duplicatesdelay directive in section %s"
2271msgstr ""
2272
2273#, python-format
2274msgid "Incorrect value %s for the noprintingmaxdelay directive in section %s"
2275msgstr ""
2276
2277#, python-format
2278msgid "Option accountbanner in section %s only supports values in %s"
2279msgstr ""
2280
2281#, python-format
2282msgid "Option trustjobsize for printer %s is incorrect"
2283msgstr ""
2284
2285msgid "History"
2286msgstr "Hist�o"
2287
2288msgid "Users"
2289msgstr ""
2290
2291msgid "Groups"
2292msgstr ""
2293
2294msgid "Printers"
2295msgstr ""
2296
2297msgid "Users Print Quotas"
2298msgstr ""
2299
2300msgid "Users Groups Print Quotas"
2301msgstr ""
2302
2303msgid "History of Payments"
2304msgstr ""
2305
2306msgid "Printers Groups Membership"
2307msgstr ""
2308
2309msgid "Users Groups Membership"
2310msgstr ""
2311
2312msgid "Billing Codes"
2313msgstr ""
2314
2315msgid "All"
2316msgstr ""
2317
2318msgid "Comma Separated Values"
2319msgstr ""
2320
2321msgid "Semicolon Separated Values"
2322msgstr ""
2323
2324msgid "Tabulation Separated Values"
2325msgstr ""
2326
2327msgid "eXtensible Markup Language"
2328msgstr ""
2329
2330msgid "CUPS' page_log"
2331msgstr ""
2332
2333#, python-format
2334msgid "Invalid modifier [%s] for --data command line option, see help."
2335msgstr ""
2336
2337msgid ""
2338"Dumping all PyKota's datas forces format to XML, and disables --sum and "
2339"filters."
2340msgstr ""
2341
2342#, python-format
2343msgid "Invalid modifier [%s] for --format command line option, see help."
2344msgstr ""
2345
2346msgid "XML output is disabled because the jaxml module is not available."
2347msgstr ""
2348
2349#, python-format
2350msgid "Invalid data type [%s] for --sum command line option, see help."
2351msgstr ""
2352
2353msgid "PyKota data dumper failed : I/O error"
2354msgstr ""
2355
2356#, python-format
2357msgid "Unsupported logging subsystem %s"
2358msgstr "Sistema de logging %s n�suportado"
2359
2360#, python-format
2361msgid "Report for %s quota on printer %s"
2362msgstr "Relat� de cota %s para a impressora %s"
2363
2364#, python-format
2365msgid "Pages grace time: %i days"
2366msgstr "Per�o de toler�ia : %i d�"
2367
2368#, python-format
2369msgid "Price per job: %.3f"
2370msgstr "Pre�por trabalho: %.3f"
2371
2372#, python-format
2373msgid "Price per page: %.3f"
2374msgstr "Pre�por p�na: %.3f"
2375
2376msgid ""
2377"Group          overcharge   used    soft    hard    balance grace         "
2378"total       paid warn"
2379msgstr ""
2380
2381msgid ""
2382"User           overcharge   used    soft    hard    balance grace         "
2383"total       paid warn"
2384msgstr ""
2385
2386msgid "unknown"
2387msgstr "Desconhecido"
2388
2389#, python-format
2390msgid "Real : %s"
2391msgstr "Real : %s"
2392
2393#, python-format
2394msgid "Total : %9i"
2395msgstr "Total : %9i"
2396
2397msgid "N/A"
2398msgstr ""
2399
2400#, python-format
2401msgid "Unsupported reporter backend %s"
2402msgstr "Backend reporter %s n�suportado"
2403
2404#, python-format
2405msgid "Refunded %i pages and %.3f credits by %s (%s) on %s"
2406msgstr ""
2407
2408#, python-format
2409msgid "Unsupported quota storage backend %s"
2410msgstr "Base de dados %s n�suportada"
2411
2412msgid "Done"
2413msgstr ""
2414
2415msgid "Average speed"
2416msgstr ""
2417
2418msgid "entries per second"
2419msgstr ""
2420
2421#, python-format
2422msgid "Strange problem with uid(%s) : %s"
2423msgstr ""
2424
2425#, python-format
2426msgid "Running as user '%s'."
2427msgstr ""
2428
2429msgid "No user named 'pykota'. Not dropping priviledges."
2430msgstr ""
2431
2432#, python-format
2433msgid "Impossible to drop priviledges : %s"
2434msgstr ""
2435
2436msgid "Priviledges dropped. Now running as user 'pykota'."
2437msgstr ""
2438
2439#, python-format
2440msgid "Impossible to regain priviledges : %s"
2441msgstr ""
2442
2443msgid "Regained priviledges. Now running as root."
2444msgstr ""
2445
2446msgid "Please report bugs to :"
2447msgstr ""
2448
2449#, python-format
2450msgid ""
2451"\n"
2452"\n"
2453"Please contact your system administrator :\n"
2454"\n"
2455"\t%s - <%s>\n"
2456msgstr ""
2457"\n"
2458"\n"
2459"Por favor contacte a seu administrador de sistemas:\n"
2460"\n"
2461"\t%s - <%s>\n"
2462
2463#, python-format
2464msgid "Unable to match user %s on printer %s, applying default policy (%s)"
2465msgstr ""
2466"N�foi poss�l encontrar o utilizador %s para a impressora %s, foi "
2467"aplicada por omiss�a pol�ca (%s)"
2468
2469#, python-format
2470msgid ""
2471"Unable to find user %s's account balance, applying default policy (%s) for "
2472"printer %s"
2473msgstr ""
2474"N�foi poss�l encontrar o saldo da conta do utilizador %s, foi "
2475"configurado por omiss�o valor (%s) para a impressora %s"
2476
2477#, python-format
2478msgid "User %s will not be charged for printing."
2479msgstr ""
2480
2481#, python-format
2482msgid "Print Quota exceeded for group %s on printer %s"
2483msgstr "Cota de impress�excedida para o grupo %s na impressora %s"
2484
2485msgid "Print Quota Exceeded"
2486msgstr "Cota de impress�excedida"
2487
2488#, python-format
2489msgid "Print Quota low for group %s on printer %s"
2490msgstr "Cota de impress�baixa para o grupo %s na impresora %s"
2491
2492msgid "Print Quota Low"
2493msgstr "Cota de impress�baixa"
2494
2495#, python-format
2496msgid ""
2497"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
2498"double check /etc/pykota/pykota.conf : %s"
2499msgstr ""
2500"Base de busca %s parece n�existir, provavelmente por causa de m�
2501"configura�.Por favor, verifique as configura�s do arquivo /etc/pykota/"
2502"pykota.conf : %s"
2503
2504#, python-format
2505msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
2506msgstr ""
2507"A pesquisa de %s(%s) usando o esc� %s(scope=%s) n�devolveu resultados."
2508
2509#, python-format
2510msgid "Problem adding LDAP entry (%s, %s)"
2511msgstr "Ocorreu um problema ao adicionar a entrada LDAP (%s, %s)"
2512
2513#, python-format
2514msgid "Problem deleting LDAP entry (%s)"
2515msgstr "Ocorreu um problema ao apagar a entrada LDAP (%s)"
2516
2517#, python-format
2518msgid "Problem modifying LDAP entry (%s, %s)"
2519msgstr "Ocorreu um problema ao modificar a entrada LDAP (%s, %s)"
2520
2521#, python-format
2522msgid ""
2523"No pykotaAccountBalance object found for user %s. Did you create LDAP "
2524"entries manually ?"
2525msgstr ""
2526
2527msgid "Hidden because of privacy concerns"
2528msgstr ""
2529
2530#, python-format
2531msgid ""
2532"Unable to find an existing objectClass %s entry with %s=%s to attach "
2533"pykotaAccount objectClass"
2534msgstr ""
2535"Imposs�l encontrar uma entrada objectClass %s existente com %s=%s "
2536"paraanexar objectClass pykotaAccount"
2537
2538#, python-format
2539msgid "%s. A new entry will be created instead."
2540msgstr ""
2541
2542#, python-format
2543msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
2544msgstr ""
2545"Imposs�l encontrar uma entrada existente para anexar ao objectClass "
2546"pykotaGroup %s"
2547
2548msgid ""
2549"Your version of python-mysqldb is too old. Please install a newer release."
2550msgstr ""
2551
2552#, python-format
2553msgid "A problem occured while reading printer %s's internal page counter."
2554msgstr ""
2555
2556#, python-format
2557msgid "Retrieving printer %s's page counter from database instead."
2558msgstr ""
2559
2560#, python-format
2561msgid ""
2562"Couldn't retrieve printer %s's internal page counter either before or after "
2563"printing."
2564msgstr ""
2565
2566#, python-format
2567msgid "Job's size forced to 1 page for printer %s."
2568msgstr ""
2569
2570#, python-format
2571msgid "No previous job in database for printer %s."
2572msgstr ""
2573
2574#, python-format
2575msgid "Inconsistent values for printer %s's internal page counter."
2576msgstr ""
2577
2578#, python-format
2579msgid "Unknown printer address in HARDWARE(%s) for printer %s"
2580msgstr "Endere�inv�do em HARDWARE(%s) para a impressora %s"
2581
2582#, python-format
2583msgid "Launching HARDWARE(%s)..."
2584msgstr "Tentando identifica� f�ca(%s)..."
2585
2586#, python-format
2587msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
2588msgstr "Sinal SIGTERM enviado para contador f�co %s (pid : %s)"
2589
2590#, python-format
2591msgid "Line [%s] skipped in accounter's output. Trying again..."
2592msgstr ""
2593
2594#, python-format
2595msgid "Hardware accounter %s exit code is %s"
2596msgstr ""
2597
2598#, python-format
2599msgid "Unable to query printer %s via HARDWARE(%s)"
2600msgstr "Foi imposs�l consultar a impressora %s via HARDWARE(%s)"
2601
2602#, python-format
2603msgid ""
2604"Unable to precompute the job's size and ink coverage with the generic PDL "
2605"analyzer : %s"
2606msgstr ""
2607
2608#, python-format
2609msgid "Problem during connection to %s:%s : %s"
2610msgstr ""
2611
2612#, python-format
2613msgid "Problem while sending PJL query to %s:%s : %s"
2614msgstr ""
2615
2616#, python-format
2617msgid "Problem while receiving PJL answer from %s:%s : %s"
2618msgstr ""
2619
2620#, python-format
2621msgid "Waiting for printer %s to be printing..."
2622msgstr ""
2623
2624#, python-format
2625msgid "Waiting for printer %s's idle status to stabilize..."
2626msgstr ""
2627
2628#, python-format
2629msgid ""
2630"PJL querying stage interrupted. Using latest value seen for internal page "
2631"counter (%s) on printer %s."
2632msgstr ""
2633
2634#, python-format
2635msgid ""
2636"SNMP querying stage interrupted. Using latest value seen for internal page "
2637"counter (%s) on printer %s."
2638msgstr ""
2639
2640#, python-format
2641msgid "Network error while doing SNMP queries on printer %s : %s"
2642msgstr ""
2643
2644#, python-format
2645msgid "SNMP message decoding error for printer %s : %s"
2646msgstr ""
2647
2648#, python-format
2649msgid "Problem encountered while doing SNMP queries on printer %s : %s"
2650msgstr ""
2651
2652#, python-format
2653msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
2654msgstr ""
2655"Imposs�l calcular tamanho da tarefa usando analisador gen�o de PDL : %s"
2656
2657#, python-format
2658msgid "Launching SOFTWARE(%s)..."
2659msgstr "Tentando identifica� l�a (%s)..."
2660
2661#, python-format
2662msgid "Unable to compute job size with accounter %s"
2663msgstr "Foi imposs�l calcular o tamanho do trabalho com o contador %s"
2664
2665#, python-format
2666msgid "Problem while waiting for software accounter pid %s to exit : %s"
2667msgstr "Problema ao aguardar encerramento do contador l�o de pid %s : %s"
2668
2669#, python-format
2670msgid "Software accounter %s exit code is %s"
2671msgstr "C�o de erro para contador l�o %s : %s"
2672
2673msgid "Totals may be inaccurate if some users are members of several groups."
2674msgstr ""
2675"O total pode n�ser exacto, caso os utilizadores sejam membros de v�os "
2676"grupos."
2677
2678msgid "PyKota Data Dumper"
2679msgstr ""
2680
2681msgid "Dump"
2682msgstr ""
2683
2684msgid "Please click on the above button"
2685msgstr ""
2686
2687msgid "Data Type"
2688msgstr ""
2689
2690msgid "Output Format"
2691msgstr ""
2692
2693msgid "Filter"
2694msgstr ""
2695
2696msgid "Summarize"
2697msgstr ""
2698
2699msgid "only for payments or history"
2700msgstr ""
2701
2702msgid "PyKota Reports"
2703msgstr "Relat� do Pykota"
2704
2705msgid "Report"
2706msgstr "Relat�"
2707
2708msgid "Printer"
2709msgstr "Impressora"
2710
2711msgid "User / Group names mask"
2712msgstr "M�ara de nomes para Usu�os / Grupos"
2713
2714msgid "Groups report"
2715msgstr "Relat� de Grupos"
2716
2717msgid "Empty"
2718msgstr "Vazio"
2719
2720msgid "Action"
2721msgstr "A�"
2722
2723msgid "User"
2724msgstr "Usu�o"
2725
2726msgid "Hostname"
2727msgstr "Nome do computador"
2728
2729msgid "JobId"
2730msgstr "Id da Tarefa"
2731
2732msgid "Number of pages"
2733msgstr ""
2734
2735msgid "Cost"
2736msgstr ""
2737
2738msgid "Copies"
2739msgstr "C�s"
2740
2741msgid "Number of bytes"
2742msgstr ""
2743
2744msgid "Printer's internal counter"
2745msgstr ""
2746
2747msgid "Options"
2748msgstr "Op�s"
2749
2750msgid "MD5Sum"
2751msgstr ""
2752
2753msgid "Billing code"
2754msgstr ""
2755
2756msgid "Precomputed number of pages"
2757msgstr ""
2758
2759msgid "Precomputed cost"
2760msgstr ""
2761
2762msgid "Pages details"
2763msgstr ""
2764
2765msgid "(not supported yet)"
2766msgstr ""
2767
2768msgid "Previous page"
2769msgstr "P�na anterior"
2770
2771msgid "PyKota Quotes"
2772msgstr ""
2773
2774msgid "Quote"
2775msgstr ""
2776
2777msgid ""
2778"The exact cost of a print job can only be determined for a particular user. "
2779"Please retry while logged-in."
2780msgstr ""
2781
2782msgid "Ordering"
2783msgstr ""
2784
2785#~ msgid "Impossible to add printer %s"
2786#~ msgstr "Foi imposs�l adicionar a impressora %s"
2787
2788#~ msgid "Prototype object %s not found in Quota Storage."
2789#~ msgstr "Objecto do prot�o %s n�encontrado na base de dados."
2790
2791#~ msgid "Prototype %s not found in Quota Storage for printer %s."
2792#~ msgstr "Prot�o %s n�encontrado na base de dados para a impressora %s."
2793
2794#~ msgid "Undefined hard limit set to soft limit (%s) on printer %s."
2795#~ msgstr ""
2796#~ "Limite m�mo indefinido, foi usado o valor do limite m�mo (%s) para a "
2797#~ "impressora %s."
2798
2799#~ msgid "Undefined soft limit set to hard limit (%s) on printer %s."
2800#~ msgstr ""
2801#~ "Limite m�mo indefinido, foi usado o valor do limite m�mo (%s) para a "
2802#~ "impressora %s."
2803
2804#~ msgid "Invalid group name %s"
2805#~ msgstr "O nome do grupo %s �nv�do"
2806
2807#~ msgid "Invalid user name %s"
2808#~ msgstr "O nome do utilizador %s �nv�do"
2809
2810#~ msgid "Quota not found for object %s on printer %s."
2811#~ msgstr "Cota n�encontrada para o objecto %s da impressora %s."
2812
2813#~ msgid "Group %s not found in the PyKota Storage."
2814#~ msgstr "Grupo %s n�encontrado na base de dados."
2815
2816#~ msgid "File number %s unregistered twice from polling object, ignored."
2817#~ msgstr ""
2818#~ "Arquivo n� %s descadastrado duas vezes do objeto de consulta. Ignorado"
2819
2820#~ msgid "SIGTERM was sent to real backend %s (pid: %s)"
2821#~ msgstr "Foi enviado um SIGTERM para o backend %s (pid: %s)"
2822
2823#~ msgid "CUPS backend %s died abnormally."
2824#~ msgstr "O backend CUPS morreu inesperadamente."
2825
2826#~ msgid "Software accounting already done in first pass. Ignoring."
2827#~ msgstr "O contador l�o j�oi aplicado no primeiro passo. Ignorando."
2828
2829#~ msgid "Hardware accounting already done in first pass. Ignoring."
2830#~ msgstr "O contador f�co j�oi aplicado no primeiro passo. Ignorando"
2831
2832#~ msgid "Invalid DeviceURI : %s"
2833#~ msgstr "DeviceURI inv�do : %s"
2834
2835#~ msgid ""
2836#~ "\n"
2837#~ "Please wait while pkhint analyzes your printing system's configuration..."
2838#~ msgstr ""
2839#~ "\n"
2840#~ "Por favor, aguarde enquanto pkhint analisa as configura�s de seu "
2841#~ "sistema de impress�.."
2842
2843#~ msgid "Unknown device %s for printer %s"
2844#~ msgstr "Dispositivo %s inv�do para a impressora %s"
2845
2846#~ msgid ""
2847#~ "\n"
2848#~ "Put the following lines into your /etc/pykota/pykota.conf file :\n"
2849#~ msgstr ""
2850#~ "\n"
2851#~ "Pondo as seguintes linhas no arquivo /etc/pykota/pykota.conf : \n"
2852
2853#~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
2854#~ msgstr "# CUIDADO : se o contador l�o for sugerido, isto n�significa"
2855
2856#~ msgid ""
2857#~ "# that hardware accounting wouldn't work, this only means that PyKota"
2858#~ msgstr ""
2859#~ "# que o contador l�o poder��funcionar. Isto significa somente que "
2860#~ "o Pykota"
2861
2862#~ msgid "# wasn't able to autodetect which hardware accounting method to use."
2863#~ msgstr ""
2864#~ "# n�foi capaz de detectar automaticamente o m�do de contagem f�ca a "
2865#~ "ser utilizado"
2866
2867#~ msgid "JobSize"
2868#~ msgstr "Tamanho da Tarefa"
2869
2870#~ msgid "JobPrice"
2871#~ msgstr "Pre�da Tarefa"
2872
2873#~ msgid "JobBytes"
2874#~ msgstr "Tamanho da Tarefa em Bytes"
2875
2876#~ msgid "PageCounter"
2877#~ msgstr "Contador de p�nas"
2878
2879#~ msgid "Printing system %s, args=%s"
2880#~ msgstr "Sistema de impress�%s, argumentos=%s"
2881
2882#~ msgid "Printer hostname undefined, set to 'localhost'"
2883#~ msgstr ""
2884#~ "Nome do servidor de impress�n�definido, foi configurado para "
2885#~ "'localhost'"
2886
2887#~ msgid "Printing system unknown, args=%s"
2888#~ msgstr "Sistema de impress�desconhecido, args=%s"
2889
2890#~ msgid ""
2891#~ "Group           used    soft    hard    balance grace         total       "
2892#~ "paid"
2893#~ msgstr ""
2894#~ "Grupo           gasto   m�mo  m�mo  saldo   toler�ia    total       "
2895#~ "pago"
2896
2897#~ msgid ""
2898#~ "User            used    soft    hard    balance grace         total       "
2899#~ "paid"
2900#~ msgstr ""
2901#~ "Utilizador      gasto   m�mo  m�mo  saldo   toler�ia    total       "
2902#~ "pago"
Note: See TracBrowser for help on using the browser.