[695] | 1 | # $Id$ |
---|
| 2 | |
---|
[3259] | 3 | PyKota - Print Quotas for CUPS |
---|
[695] | 4 | |
---|
[3481] | 5 | (c) 2003-2009 Jerome Alet <alet@librelogiciel.com> |
---|
[3259] | 6 | This program is free software: you can redistribute it and/or modify |
---|
[873] | 7 | it under the terms of the GNU General Public License as published by |
---|
[3259] | 8 | the Free Software Foundation, either version 3 of the License, or |
---|
[873] | 9 | (at your option) any later version. |
---|
[695] | 10 | |
---|
[873] | 11 | This program is distributed in the hope that it will be useful, |
---|
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
| 14 | GNU General Public License for more details. |
---|
[695] | 15 | |
---|
[873] | 16 | You should have received a copy of the GNU General Public License |
---|
[3259] | 17 | along with this program. If not, see <http://www.gnu.org/licenses/>. |
---|
[873] | 18 | |
---|
[761] | 19 | ==================================================================== |
---|
[695] | 20 | |
---|
[1052] | 21 | READ SPECIAL LICENSING AND REDISTRIBUTION TERMS IN THE FILE 'LICENSE' |
---|
[761] | 22 | |
---|
| 23 | ==================================================================== |
---|
| 24 | |
---|
[1154] | 25 | PyKota features : |
---|
| 26 | ----------------- |
---|
[695] | 27 | |
---|
[3038] | 28 | http://www.pykota.com/software/pykota/features/ |
---|
[2638] | 29 | |
---|
[1154] | 30 | ==================================================================== |
---|
[3413] | 31 | |
---|
[739] | 32 | Planned features are described in the TODO file. |
---|
| 33 | |
---|
[3104] | 34 | Actually three (or an infinity of) page accounting methods are |
---|
[980] | 35 | implemented : |
---|
[695] | 36 | |
---|
[1475] | 37 | - The 'hardware' method consists in querying the printer (via SNMP |
---|
[3413] | 38 | or Netatalk or any other method of your choice) for its internal |
---|
[3104] | 39 | pages counter. |
---|
[1600] | 40 | This is done both at the beginning and at the end of a |
---|
[3413] | 41 | print job. The counters difference is then used to |
---|
[1186] | 42 | decrease the user's account balance or increase his quota usage. |
---|
[3413] | 43 | |
---|
[1475] | 44 | - The 'software' method consists in delegating the computation of the |
---|
[980] | 45 | job's size in number of pages to any external command of your choice. |
---|
| 46 | The command can read the job's data from its standard input and MUST |
---|
[1186] | 47 | output the job's size on its standard output. Changes to the user |
---|
[3104] | 48 | account are reported immediately. PyKota by default internally |
---|
[3282] | 49 | uses the code from pkpgcounter which can handle a large number |
---|
| 50 | of Page Description Languages, and can parse documents produced |
---|
| 51 | either by GhostScript or by a number of native printer drivers. |
---|
[3104] | 52 | Of course this means you have to install pkpgcounter if you want to |
---|
| 53 | use the default PDL parser. |
---|
[3282] | 54 | An up-to-date list of supported Page Description Languages and their |
---|
| 55 | level of support is available from : |
---|
[3413] | 56 | |
---|
[3282] | 57 | http://www.pykota.com/software/pkpgcounter/ |
---|
[3413] | 58 | |
---|
| 59 | - The 'ink' method consists in using pkpgcounter's code to compute |
---|
[3104] | 60 | how much of each page is covered by ink in each color of a particular |
---|
| 61 | colorspace chosen between CMYK, CMY, RGB, and BW (grayscale). |
---|
| 62 | These values are then summed up together and multiplied by a set |
---|
| 63 | of coefficients defined in PyKota's configuration files. |
---|
[3413] | 64 | |
---|
[3104] | 65 | PyKota is known to work with most printers, excepted GDI ones (Windows |
---|
| 66 | only). At least one of the accounting methods above should work |
---|
| 67 | for you. If it's not the case, please report the problem : tell us |
---|
| 68 | the exact brand and model of the printer, if possible the driver used, |
---|
| 69 | and send some test files. |
---|
[724] | 70 | |
---|
[695] | 71 | ============================================================ |
---|
| 72 | |
---|
[2001] | 73 | SUPPORT CONTRACTS: |
---|
| 74 | ================== |
---|
| 75 | |
---|
| 76 | You can now purchase 8x5x365@NextBusinessDay Technical |
---|
[3413] | 77 | Support Contracts from us. The yearly fee is computed with |
---|
[2126] | 78 | the following formula : |
---|
[2001] | 79 | |
---|
| 80 | (100.0 * NbPrintServers) + (2.5 * NbPrinters) + (0.04 * NbUsers) EUROS. |
---|
[3413] | 81 | |
---|
[2542] | 82 | This fee includes the VAT, and a free subscription to Official |
---|
| 83 | PyKota packages. |
---|
[2001] | 84 | |
---|
| 85 | Please send an email to alet@librelogiciel.com if you're |
---|
[3413] | 86 | interested in purchasing such a contract. |
---|
[2001] | 87 | |
---|
[2126] | 88 | Remember that purchasing a support contract for Free Software like PyKota |
---|
[3413] | 89 | is a great way to show your appreciation for the work already being done |
---|
[2126] | 90 | on this project, and will help to improve this software in the future. |
---|
| 91 | |
---|
[2001] | 92 | ============================================================ |
---|
| 93 | |
---|
[695] | 94 | INSTALLATION: |
---|
| 95 | ============= |
---|
| 96 | |
---|
[1186] | 97 | NB : |
---|
| 98 | ==== |
---|
[887] | 99 | |
---|
[2714] | 100 | PyKota's documentation is available as DocBook SGML sources |
---|
| 101 | files in the pykota/docs directory. If you obtained an |
---|
| 102 | Official package, in the same directory you'll also find |
---|
[3104] | 103 | the documentation in HTML and PDF formats. Otherwise you |
---|
| 104 | have to compile it into HTML or PDF yourself by using |
---|
| 105 | the appropriate tools as installed on your system. |
---|
[3413] | 106 | |
---|
[2714] | 107 | PyKota's collaborative documentation is available from : |
---|
[3413] | 108 | |
---|
[2909] | 109 | http://www.pykota.com/wiki/ |
---|
[3413] | 110 | |
---|
[1397] | 111 | You may learn more about PyKota, if it fits your own organization, |
---|
| 112 | its internal working, and some potential performance drawbacks and |
---|
[2054] | 113 | how to avoid them, in a document created by Ryan Suarez at : |
---|
[3413] | 114 | |
---|
[2005] | 115 | http://archive.macosxlabs.org/forum/webcrossing_archive/documentation/Pykota_and_CUPS/Pykota_and_CUPS.html |
---|
[1034] | 116 | |
---|
[1651] | 117 | You may also find the following document interesting : |
---|
[3413] | 118 | |
---|
[1651] | 119 | http://es.tldp.org/Tutoriales/doc-openldap-samba-cups-python/ |
---|
[3413] | 120 | |
---|
| 121 | This document, written in Spanish by Sergio Gonzalez Gonzalez, |
---|
[1651] | 122 | describes the integration of PyKota into an OpenLDAP + Samba |
---|
[3413] | 123 | + CUPS installation. Even for people who can't read spanish |
---|
[1651] | 124 | this document is really interesting, and contains lots of |
---|
| 125 | screenshots. |
---|
[3413] | 126 | |
---|
| 127 | |
---|
| 128 | Prerequisite : |
---|
[714] | 129 | -------------- |
---|
[3413] | 130 | |
---|
[2714] | 131 | See : |
---|
[3413] | 132 | |
---|
[2909] | 133 | http://www.pykota.com/wiki/Dependencies |
---|
[3413] | 134 | |
---|
[2714] | 135 | for an up-to-date list, or see below (maybe not up-to-date) : |
---|
[3413] | 136 | |
---|
[714] | 137 | You need to have the following tools installed on the CUPS Server : |
---|
[3413] | 138 | |
---|
[3282] | 139 | - CUPS (http://www.cups.org). PyKota v1.27 requires CUPS v1.3.4 or higher. |
---|
[3473] | 140 | - Python v2.4 or higher (http://www.python.org) |
---|
[1886] | 141 | - eGenix' mxDateTime Python extension (http://www.egenix.com) |
---|
[2345] | 142 | - The pkpgcounter command line tool, version 1.56 or higher. This |
---|
[3413] | 143 | tool is now mandatory for PyKota to work. |
---|
[2909] | 144 | (http://www.pykota.com/software/pkpgcounter) |
---|
[3413] | 145 | - The pkipplib Python library (http://www.pykota.com/software/pkipplib) |
---|
[1771] | 146 | - The JAXML Python module to be able to dump datas in the XML format. |
---|
[1886] | 147 | (http://www.librelogiciel.com/software/) |
---|
[3413] | 148 | - The Python-PAM module if you need the pknotify command to be able |
---|
[3006] | 149 | to check usernames and passwords. (http://www.pangalactic.org/PyPAM) |
---|
[1771] | 150 | - The Python-SNMP module to query printers for their page counter. |
---|
[3413] | 151 | (http://pysnmp.sourceforge.net) |
---|
[3473] | 152 | IMPORTANT : version 3.4.2 or higher, preferably v4.x is now REQUIRED. |
---|
| 153 | Versions 2.x won't work. |
---|
[1771] | 154 | - The Python-OSD module to use the graphical print quota reminder. |
---|
[2189] | 155 | (http://repose.cx/pyosd/) |
---|
[1771] | 156 | - SNMP tools (specifically the snmpget command) if you prefer to |
---|
[3287] | 157 | use your own script to request query printers instead of PyKota's |
---|
[3473] | 158 | internal SNMP handling facilities, which is not recommended... |
---|
| 159 | (http://www.net-snmp.org). You probably don't need this. |
---|
[919] | 160 | - Netatalk (specifically the pap command) if you plan to |
---|
| 161 | request your printer's lifetime page counter via AppleTalk. |
---|
[3473] | 162 | (http://netatalk.sourceforge.net). You probably don't need this. |
---|
[3413] | 163 | - The ReportLab Python module (http://www.reportlab.org) if you want |
---|
[3473] | 164 | to have PyKota generate nice banners, invoices or receipts in PDF for you. |
---|
[3413] | 165 | - The Python Imaging Library (aka PIL) module |
---|
| 166 | (http://www.pythonware.com/downloads) if you want to have PyKota |
---|
[3473] | 167 | generate nice banners, invoices or receipts in PDF for you. |
---|
[1043] | 168 | - PostgreSQL's PygreSQL Python extension and the PostgreSQL client |
---|
[2597] | 169 | libraries if you plan to use PostgreSQL as the database backend. |
---|
[1886] | 170 | (http://www.postgresql.org and http://www.pygreql.org) |
---|
[3413] | 171 | or |
---|
| 172 | - python-ldap Python module and the OpenLDAP client libraries |
---|
[2597] | 173 | if you plan to use an LDAP server as the database backend. |
---|
[1886] | 174 | (http://www.openldap.org and http://python-ldap.sourceforge.net) |
---|
[3413] | 175 | or |
---|
[2597] | 176 | - SQLite v3.2.7 and the SQLite libraries if you plan to use SQLite |
---|
[3413] | 177 | as the database backend (http://www.sqlite.org). You also need the |
---|
[2597] | 178 | PySQLite module v2.0.5 or higher (http://www.pysqlite.org) |
---|
[2638] | 179 | or |
---|
[3413] | 180 | - The MySQL-python bindings. |
---|
| 181 | IMPORTANT: If you are using MySQL 4.1, then MySQL-python must be |
---|
[2638] | 182 | version 1.2 or greater. Version 1.0 does not work correctly with 4.1. |
---|
[3413] | 183 | |
---|
| 184 | |
---|
[1771] | 185 | On Intel i386 architecture, and for performance reasons, it is |
---|
[3408] | 186 | suggested that you install the Python accelerator Psyco, available from : |
---|
[3413] | 187 | |
---|
[1570] | 188 | http://psyco.sourceforge.net |
---|
[3413] | 189 | |
---|
| 190 | Under Debian : |
---|
| 191 | |
---|
[1571] | 192 | $ apt-get install python-psyco |
---|
[3413] | 193 | |
---|
| 194 | Other architectures may be supported as well in the future, check |
---|
[1600] | 195 | this on Psyco's website. |
---|
[3413] | 196 | |
---|
| 197 | Installing Psyco is not mandatory, but may really speed the parsing |
---|
[3473] | 198 | of some print jobs. Don't install it if you don't want or don't have a |
---|
| 199 | supported architecture. |
---|
[3413] | 200 | |
---|
[2597] | 201 | You need to have the following tools installed on the database |
---|
| 202 | server : |
---|
[3413] | 203 | |
---|
[1886] | 204 | - PostgreSQL (http://www.postgresql.org) |
---|
[3413] | 205 | |
---|
| 206 | or |
---|
| 207 | |
---|
[1886] | 208 | - OpenLDAP, or any other LDAP server (http://www.openldap.org) |
---|
[3413] | 209 | |
---|
| 210 | or |
---|
| 211 | |
---|
[2597] | 212 | - SQLite, v3.2.7 or higher (http://www.sqlite.org). |
---|
| 213 | Beware : with SQLite the database server and the print |
---|
| 214 | servers MUST be the very same machine. |
---|
[3413] | 215 | |
---|
| 216 | or |
---|
| 217 | |
---|
[3104] | 218 | - MySQL 4.1 or higher. 5.x is recommended. |
---|
[3413] | 219 | |
---|
[714] | 220 | This list of prerequisite software may change in the future, when |
---|
[3413] | 221 | PyKota will support more functionnalities you will be given |
---|
[714] | 222 | alternatives. |
---|
[3413] | 223 | |
---|
| 224 | Of course the Print Server and the database server can be the |
---|
| 225 | very same machine if you've got a tiny network, or you can have |
---|
[2597] | 226 | multiple Print Servers all storing their quotas on the same database |
---|
| 227 | server if you've got a bigger network. (NB : with SQLite, the database |
---|
| 228 | can't be shared between several print servers) |
---|
[3413] | 229 | |
---|
| 230 | Hint : |
---|
[1886] | 231 | ------ |
---|
| 232 | |
---|
[3413] | 233 | - The Debian GNU/Linux distribution is to our knowledge the |
---|
[3081] | 234 | easiest distribution to install PyKota on, because almost all |
---|
[3408] | 235 | of PyKota dependencies are already included. |
---|
[3104] | 236 | We recommend you to use Debian's Etch distribution or |
---|
| 237 | more recent. PyKota works fine on Sarge, but some additional |
---|
| 238 | dependencies are missing in Sarge and have to be installed |
---|
| 239 | manually. |
---|
[1886] | 240 | |
---|
[3413] | 241 | Then : |
---|
[714] | 242 | ------ |
---|
[3413] | 243 | |
---|
[2135] | 244 | Download the latest PyKota version from the Subversion tree : |
---|
[695] | 245 | |
---|
[3377] | 246 | $ svn co http://svn.pykota.com/pykota/trunk pykota |
---|
[695] | 247 | |
---|
[1906] | 248 | You can now check if the dependencies are correct by typing : |
---|
[695] | 249 | |
---|
[2135] | 250 | $ python checkdeps.py |
---|
[3413] | 251 | |
---|
[2234] | 252 | An availability report for all the software needed by PyKota |
---|
| 253 | will be displayed : you'll have to install the missing |
---|
| 254 | software if you want PyKota to work correctly. |
---|
[3413] | 255 | |
---|
[1906] | 256 | To install the software, just type : |
---|
| 257 | |
---|
[2135] | 258 | $ python setup.py install |
---|
[695] | 259 | |
---|
| 260 | You may need to be logged in with sufficient privileges (e.g. root) |
---|
| 261 | |
---|
[3081] | 262 | If you use Debian or Ubuntu, and want to use PostgreSQL as the |
---|
| 263 | database backend, just type : |
---|
| 264 | |
---|
[3201] | 265 | $ pksetup debian |
---|
| 266 | |
---|
[3413] | 267 | or : |
---|
| 268 | |
---|
[3201] | 269 | $ pksetup ubuntu |
---|
[3413] | 270 | |
---|
[3081] | 271 | and follow the instructions to install PyKota in interactive mode, then |
---|
| 272 | skip the remaining of the section below. |
---|
| 273 | |
---|
| 274 | Otherwise, you have to setup manually : |
---|
| 275 | |
---|
[1960] | 276 | Create a system user for PyKota : |
---|
| 277 | |
---|
[2135] | 278 | $ adduser --system --group --home /etc/pykota --gecos PyKota pykota |
---|
[3413] | 279 | |
---|
[1960] | 280 | Put the user your printing system is run as in the pykota system group : |
---|
| 281 | |
---|
[2135] | 282 | $ adduser lp pykota |
---|
[3413] | 283 | |
---|
[1960] | 284 | NB : on our system, the CUPS printing system runs as system user 'lp'. |
---|
| 285 | Please adapt this to your own system. |
---|
| 286 | |
---|
[3104] | 287 | Go to the initscripts/ subdirectory of PyKota's sources, and choose |
---|
[1600] | 288 | the appropriate storage backend for your configuration. Read carefully |
---|
[3104] | 289 | the associated README file, modify the initialization script to |
---|
| 290 | change the passwords, or, in the case of the LDAP backend, adapt it |
---|
| 291 | to your own LDAP DIT, and execute the initialization script |
---|
[3413] | 292 | to create an empty PyKota database. Upgrade scripts may be |
---|
[2269] | 293 | provided as well. NB : if you use PostgreSQL, a good way to |
---|
| 294 | make PyKota work first time is to modify PostgreSQL's pg_hba.conf |
---|
| 295 | to allow the 'trust' database connection mode. However once PyKota |
---|
| 296 | works it is HIGHLY RECOMMENDED TO CHANGE THIS TO A MORE SECURE |
---|
[3104] | 297 | VALUE. Look at the SECURITY document, PyKota's Official documentation |
---|
| 298 | and PostgreSQL's documentation for details on this subject. |
---|
[695] | 299 | |
---|
[3413] | 300 | Copy the conf/pykota.conf.sample and conf/pykotadmin.conf.sample |
---|
| 301 | sample configuration files to ~pykota/pykota.conf and |
---|
| 302 | ~pykota/pykotadmin.conf |
---|
[1905] | 303 | The installation script usually copies these files into /usr/share/pykota |
---|
[1198] | 304 | |
---|
[1979] | 305 | NB : You can move PyKota's configuration files elsewhere, they will |
---|
[3104] | 306 | be searched first in user pykota's home directory, then in /etc/pykota. |
---|
[1979] | 307 | |
---|
[3413] | 308 | You need to adapt these files to your own needs. Especially you may |
---|
| 309 | have to create sections named after your own printers, and change |
---|
| 310 | the administrator's email address which by default is |
---|
| 311 | root@localhost. Read and try to understand these two very well |
---|
| 312 | commented files, so that you'll encounter less problems later. |
---|
[1905] | 313 | |
---|
[1186] | 314 | The rest of the installation depends on your printing system : |
---|
| 315 | |
---|
[1185] | 316 | - CUPS Printing System : |
---|
[3413] | 317 | |
---|
[1185] | 318 | Once and for all : |
---|
[3413] | 319 | |
---|
[3270] | 320 | Modify CUPS' cupsd.conf to make CUPS listen to 127.0.0.1:631 |
---|
| 321 | INSTEAD OF to an unix domain socket, in addition to any |
---|
| 322 | external network interface CUPS might already be listening to. |
---|
[3413] | 323 | |
---|
| 324 | Create a symbolic link to the cupspykota backend |
---|
[1185] | 325 | in CUPS's backend directory : |
---|
[3413] | 326 | |
---|
[1185] | 327 | $ cd /usr/lib/cups/backend |
---|
[1345] | 328 | $ ln -s /usr/share/pykota/cupspykota cupspykota |
---|
[3413] | 329 | |
---|
| 330 | If you use CUPS v1.2 or higher, please do this as well : |
---|
| 331 | |
---|
[2943] | 332 | $ chmod 700 /usr/share/pykota/cupspykota |
---|
[3413] | 333 | |
---|
[2943] | 334 | This allows the cupspykota backend to support other |
---|
| 335 | backends which must be run as user root, like the |
---|
| 336 | lpd backend for example. |
---|
[3413] | 337 | |
---|
[1185] | 338 | Restart CUPS so that the new backend can be detected. |
---|
[3413] | 339 | |
---|
[1185] | 340 | $ /etc/init.d/cupsys restart |
---|
[3413] | 341 | |
---|
| 342 | for example under Debian, or any similar command depending |
---|
[3104] | 343 | on your operating system of choice. |
---|
[3413] | 344 | |
---|
[1185] | 345 | For new printers : |
---|
[3413] | 346 | |
---|
| 347 | Go to CUPS management interface (http://localhost:631) |
---|
[1185] | 348 | and choose the appropriate PyKota managed device depending |
---|
| 349 | on the type of printer you use. For example, if your |
---|
| 350 | printer is waiting on : |
---|
[3413] | 351 | |
---|
[1354] | 352 | socket://myprinter.example.com:9100 |
---|
[3413] | 353 | |
---|
| 354 | Then choose : |
---|
| 355 | |
---|
[1354] | 356 | cupspykota:socket://myprinter.example.com:9100 |
---|
[3413] | 357 | |
---|
| 358 | Configure your printer as usual. |
---|
| 359 | |
---|
| 360 | Now double check /etc/pykota/pykota.conf |
---|
| 361 | |
---|
[1600] | 362 | You should manually create a section named after the |
---|
[1402] | 363 | printer you've just added, unless you have set |
---|
| 364 | all options globally. |
---|
[3413] | 365 | |
---|
| 366 | The new pkturnkey command can help you with correct settings |
---|
[3104] | 367 | for your printers. To have pkturnkey give you some hints |
---|
| 368 | about what to put into pykota.conf for a particular |
---|
| 369 | print queue, just use its --doconf command line switch : |
---|
[3413] | 370 | |
---|
[3104] | 371 | $ pkturnkey --doconf TheNameOfThePrintQueue |
---|
[3413] | 372 | |
---|
[2468] | 373 | pkturnkey will try to tell you what is the best accounting |
---|
[1600] | 374 | method for each printer and will print some lines you'll |
---|
| 375 | just have to copy&paste in the appropriate sections in |
---|
| 376 | /etc/pykota/pykota.conf |
---|
[3413] | 377 | |
---|
[2468] | 378 | For more informations about what pkturnkey can do for you, |
---|
| 379 | see pkturnkey's manual page or use the --help command |
---|
| 380 | line switch : |
---|
[3413] | 381 | |
---|
[2468] | 382 | $ pkturnkey --help | less |
---|
[3413] | 383 | |
---|
[1185] | 384 | That's all. |
---|
[3413] | 385 | |
---|
[3104] | 386 | For existing print queues : |
---|
[3413] | 387 | |
---|
[3104] | 388 | You want to route the print queue through PyKota, |
---|
| 389 | and you can do this in several manners. |
---|
[3413] | 390 | |
---|
[3104] | 391 | $ pkprinters --add --cups TheNameOfThePrintQueue |
---|
[3413] | 392 | |
---|
| 393 | or |
---|
| 394 | |
---|
[3104] | 395 | if your printer's DeviceURI is something like : |
---|
[3413] | 396 | |
---|
[3104] | 397 | socket://myprinter.example.com:9100 |
---|
[3413] | 398 | |
---|
| 399 | then you can do this : |
---|
| 400 | |
---|
[3104] | 401 | $ pkprinters --add TheNameOfThePrintQueue |
---|
| 402 | $ lpadmin -p TheNameOfThePrintQueue \ |
---|
| 403 | -v cupspykota://socket://myprinter.example.com:9100 |
---|
[3413] | 404 | |
---|
| 405 | Finally, you could do it manually by modifying the |
---|
[3104] | 406 | the DeviceURI lines in /etc/cups/printers.conf : |
---|
[3413] | 407 | You would have to preprend 'cupspykota://' in front |
---|
[3104] | 408 | of what is already on these lines. For example, replace : |
---|
[3413] | 409 | |
---|
[1354] | 410 | DeviceURI socket://myprinter.example.com:9100 |
---|
[3413] | 411 | |
---|
| 412 | with : |
---|
| 413 | |
---|
[3104] | 414 | DeviceURI cupspykota://socket://myprinter.example.com:9100 |
---|
[3413] | 415 | |
---|
| 416 | or : |
---|
| 417 | |
---|
[1354] | 418 | DeviceURI cupspykota://socket://myprinter.example.com:9100 |
---|
[3413] | 419 | |
---|
[3104] | 420 | Save the file and restart CUPS for the changes to take effect. |
---|
[3413] | 421 | |
---|
[2470] | 422 | Here too, you may find it interesting to use the pkturnkey command as |
---|
[1600] | 423 | described above to help with manual configuration of the file |
---|
| 424 | /etc/pykota/pykota.conf |
---|
[695] | 425 | |
---|
[1186] | 426 | Now you can begin to populate the PyKota's database with printers, |
---|
| 427 | users and groups : |
---|
[695] | 428 | |
---|
[3413] | 429 | Add printers and users to the quota system and set their quota values : |
---|
| 430 | |
---|
[2470] | 431 | You can either use pkturnkey, or do the same things manually by |
---|
[2714] | 432 | using the pkprinters, pkusers and edpykota command line tools : |
---|
[1345] | 433 | |
---|
[2714] | 434 | Create printers : |
---|
| 435 | |
---|
[1345] | 436 | $ pkprinters --help |
---|
[3413] | 437 | |
---|
[1345] | 438 | will tell you how to create, manage or delete printers and |
---|
| 439 | printers groups. |
---|
[3413] | 440 | |
---|
[1402] | 441 | $ pkprinters --add --charge 0.05 hp2100 |
---|
[3413] | 442 | |
---|
[1402] | 443 | would add the printer named hp2100 with a price per page |
---|
| 444 | of 0.05 unit. |
---|
[1345] | 445 | |
---|
[2714] | 446 | Create users : |
---|
[1402] | 447 | |
---|
[3104] | 448 | $ pkusers --add --limitby balance --balance 10.0 jerome |
---|
[3413] | 449 | |
---|
[2714] | 450 | would create user jerome and give him ten credits to spend |
---|
| 451 | on any printer. |
---|
[3413] | 452 | |
---|
[2714] | 453 | Finally create print quota entries : |
---|
[695] | 454 | |
---|
[3104] | 455 | $ edpykota --add --printer hp2100 john paul george ringo |
---|
[3413] | 456 | |
---|
| 457 | This will create print quota entries for The Beatles on |
---|
[2714] | 458 | printer hp2100. The print quota entry holds the number of |
---|
| 459 | pages printed on a particular printer for a particular |
---|
| 460 | user, as well as optional page limits to be used instead |
---|
| 461 | of balance limits. See pkusers and edpykota's manual |
---|
| 462 | pages for details. |
---|
[3413] | 463 | |
---|
| 464 | Your users now should be able to print but not exceed their |
---|
[695] | 465 | printing quota. |
---|
| 466 | |
---|
[2234] | 467 | To see printer quota usage on printer hp2100, you can use : |
---|
[794] | 468 | |
---|
[2234] | 469 | $ repykota --printer hp2100 |
---|
[3413] | 470 | |
---|
[794] | 471 | or : |
---|
| 472 | |
---|
| 473 | $ repykota |
---|
[3413] | 474 | |
---|
[794] | 475 | which will print quota usage for all users on all printers, |
---|
[2054] | 476 | along with totals, if you are a PyKota Administator. If you are |
---|
[1107] | 477 | a regular user, only your own quota report will be produced. |
---|
[3104] | 478 | |
---|
[3413] | 479 | You can also use these commands : |
---|
| 480 | |
---|
| 481 | $ pkusers --list |
---|
[3104] | 482 | $ edpykota --list |
---|
[3413] | 483 | |
---|
[3104] | 484 | $ pkusers --list john paul george ringo |
---|
| 485 | $ edpykota --list --printer hp2100 john paul george ringo |
---|
[3413] | 486 | |
---|
[1107] | 487 | Quota reports are also available remotely by using the CGI script |
---|
[3413] | 488 | printquota.cgi provided in the cgi-bin/ subdirectory. You can |
---|
[1345] | 489 | also use the CSS stylesheet present in the stylesheets/ subdirectory |
---|
[3413] | 490 | and put it at your web server's DocumentRoot, to benefit from a nicer |
---|
[1402] | 491 | look, especially quota violations will appear in different colors. |
---|
[990] | 492 | |
---|
[2262] | 493 | For additionnal security concerns, please give a look at the SECURITY |
---|
[980] | 494 | file which is part of this software. |
---|
[2234] | 495 | |
---|
| 496 | To diagnose a problem when something doesn't work as expected, |
---|
[3104] | 497 | please read this FAQ entry : |
---|
| 498 | |
---|
| 499 | http://otrs.librelogiciel.com/otrs/public.pl?ID=2 |
---|
[3413] | 500 | |
---|
[695] | 501 | ============================================================ |
---|
| 502 | |
---|
[3408] | 503 | Mailing lists : |
---|
| 504 | --------------- |
---|
[1979] | 505 | |
---|
[3408] | 506 | A mailing list is dedicated to PyKota, you can subscribe to it |
---|
[958] | 507 | or consult its archives at : |
---|
[3413] | 508 | |
---|
[3408] | 509 | http://lists.pykota.com/mailman/listinfo/pykota |
---|
[3413] | 510 | |
---|
| 511 | This mailing list is the preferred way to obtain support, because |
---|
[1600] | 512 | all members can help and can also benefit from the solutions |
---|
[3413] | 513 | proposed by other members. |
---|
| 514 | |
---|
[3408] | 515 | Another mailing list, dedicated to developers, is available from : |
---|
[3413] | 516 | |
---|
[3408] | 517 | http://lists.pykota.com/mailman/listinfo/pykota-devel |
---|
[3413] | 518 | |
---|
| 519 | In this mailing list you can discuss implementation details, bugs, |
---|
[3408] | 520 | ideas, and so on. All commit messages are also sent to this list. |
---|
[3413] | 521 | |
---|
[3408] | 522 | Posts by non-members are rejected. |
---|
[3413] | 523 | |
---|
[3408] | 524 | The mailing lists language is english and only english. |
---|
[3413] | 525 | |
---|
| 526 | IRC : |
---|
[1181] | 527 | ----- |
---|
| 528 | |
---|
| 529 | You can also chat with us : |
---|
[3413] | 530 | |
---|
[1181] | 531 | /server irc.freenode.net |
---|
| 532 | /join #pykota |
---|
[3413] | 533 | |
---|
| 534 | Preferred language on this channel is english, but french |
---|
[1600] | 535 | is also accepted. Try to avoid exposing complex problems |
---|
| 536 | in french because english speaking people on the channel |
---|
| 537 | wouldn't benefit from the solutions. |
---|
[3413] | 538 | |
---|
[1600] | 539 | PyKota's main author is known as 'tamere' on IRC. |
---|
[3413] | 540 | |
---|
| 541 | Bug Tracker : |
---|
[3377] | 542 | ------------- |
---|
| 543 | |
---|
| 544 | You can report bugs to our bug tracker on the development website |
---|
| 545 | at : |
---|
[3413] | 546 | |
---|
[3377] | 547 | http://trac.pykota.com |
---|