# PyKota # # PyKota : Print Quotas for CUPS and LPRng # # (c) 2003, 2004, 2005 Jerome Alet # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. # # $Id$ # # PyKota translation master file. # Copyright (c) 2003, 2004, 2005 Conseil Internet & Logiciels Libres # Jerome Alet , 2003, 2004, 2005. # msgid "" msgstr "" "Project-Id-Version: PyKota v1.20\n" "Report-Msgid-Bugs-To: alet@librelogiciel.com\n" "POT-Creation-Date: 2004-11-25 10:16+0100\n" "PO-Revision-Date: 2004-07-21 15:35:00+0100\n" "Last-Translator: Suthep Yonpimai \n" "Language-Team: Thai \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=TIS-620\n" "Content-Transfer-Encoding: 8bit\n" #, python-format msgid "" "autopykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels " "Libres\n" "A tool to automate user account creation and initial balance setting.\n" "\n" "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n" "\n" "command line usage :\n" "\n" " THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n" " OF AN external policy IN pykota.conf\n" " \n" " autopykota { -i | --initbalance value } \n" "\n" "options :\n" "\n" " -v | --version Prints autopykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -i | --initbalance b Sets the user's account initial balance value to b.\n" " If the user already exists, actual balance is left\n" " unmodified. If unset, the default value is 0.\n" " \n" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2 of the License, or\n" "(at your option) any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n" "\n" "Please e-mail bugs to: %s" msgstr "" #, python-format msgid "Banner generator %s exit code is %s" msgstr "" msgid "Job contains no data. Printing is denied." msgstr "ไม่พบข้อมูลในงาน ปฏิเสธการพิมพ์ " msgid "Job is a duplicate. Printing is denied." msgstr "" msgid "Banner won't be printed : maximum number of deny banners reached." msgstr "" msgid "Job accounting begins." msgstr "เริ่มการทำงานของสมาชิก" msgid "Job accounting ends." msgstr "จบการทำงานของสมาชิก" msgid "Job size forced to 0 because printing is denied." msgstr "ขนาดของงานถูกเปลี่ยนเป็น 0 เพราะปฏิเสธการพิมพ์" #, python-format msgid "Beware : computed job size (%s) != precomputed job size (%s)" msgstr "" msgid "" "The job size will be trusted anyway according to the 'trustjobsize' directive" msgstr "" #, python-format msgid "" "The job size will be trusted because it is inferior to the 'trustjobsize' " "directive's limit %s" msgstr "" #, python-format msgid "" "The job size will be modified according to the 'trustjobsize' directive : %s" msgstr "" #, python-format msgid "Job size : %i" msgstr "ขนาดงาน : %i" #, python-format msgid "Updating user %s's quota on printer %s" msgstr "กำลังปรับปรุงโควต้าของผู้ใช้ %s บนเครื่องพิมพ์ %s" msgid "Job added to history." msgstr "ส่งงานเข้าสู่ประวัติ" #, python-format msgid "File number %s unregistered twice from polling object, ignored." msgstr "แฟ้มข้อมูลหมายเลข %s ไม่ได้รับการลงทะเบียน 2 ครั้งจากขั้นเตรียมการ ,ข้ามไป" #, python-format msgid "SIGTERM was sent to real backend %s (pid: %s)" msgstr "สัญญาณ SIGTERM ถูกส่งไปยังเครื่องรับ %s (pid: %s)" #, python-format msgid "CUPS backend %s died abnormally." msgstr "CUPS ของเครื่องรับ %s มีการหยุดทำงานแบบผิดปรกติ" #, python-format msgid "" "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels " "Libres\n" "\n" "Dumps PyKota database's content.\n" "\n" "command line usage :\n" "\n" " dumpykota [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints dumpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -d | --data type Dumps 'type' datas. Allowed types are :\n" " \n" " - history : dumps the jobs history.\n" " - users : dumps users.\n" " - groups : dumps user groups.\n" " - printers : dump printers.\n" " - upquotas : dump user quotas.\n" " - gpquotas : dump user groups quotas.\n" " - payments : dumps user payments.\n" " - pmembers : dumps printer groups members.\n" " - umembers : dumps user groups members.\n" " \n" " NB : the -d | --data command line option \n" " is MANDATORY.\n" " \n" " -f | --format fmt Dumps datas in the 'fmt' format. When not specified,\n" " the format is to dump datas in the csv format (comma\n" " separated values). All data dumped is between double\n" " quotes. Allowed formats are :\n" " \n" " - csv : separate datas with commas\n" " - ssv : separate datas with semicolons\n" " - tsv : separate datas with tabs\n" " - xml : dump data as XML\n" " - cups : dump datas in CUPS' page_log format :\n" " ONLY AVAILABLE WITH --data history\n" " \n" " -o | --output fname All datas will be dumped to the file instead of\n" " to the standard output. The special '-' filename\n" " is the default value and means stdout.\n" " WARNING : existing files are truncated !\n" " \n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " groupname Users group's name\n" " printername Printer's name\n" " pgroupname Printers group's name\n" " hostname Client's hostname\n" " billingcode Job's billing code\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" " NB : not all keys are allowed for each data type, so the result may be \n" " empty if you use a key not available for a particular data type.\n" " \n" "Examples :\n" "\n" " $ dumpykota --data history --format csv >myfile.csv\n" " \n" " This dumps the history in a comma separated values file, for possible\n" " use in a spreadsheet.\n" " \n" " $ dumpykota --data users --format xml -o users.xml\n" " \n" " Dumps all users datas to the users.xml file.\n" " \n" " $ dumpykota --data history printername=HP2100 username=jerome\n" " \n" " Dumps the job history for user jerome on printer HP2100 only.\n" " \n" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2 of the License, or\n" "(at your option) any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n" "\n" "Please e-mail bugs to: %s" msgstr "" msgid "The -d | --data command line option is mandatory, see help." msgstr "" #, python-format msgid "" "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels " "Libres\n" "A Print Quota editor for PyKota.\n" "\n" "command line usage :\n" "\n" " edpykota [options] user1 user2 ... userN\n" " \n" " edpykota [options] group1 group2 ... groupN\n" "\n" "options :\n" "\n" " -v | --version Prints edpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds users and/or printers if they don't \n" " exist on the Quota Storage Server.\n" " \n" " -d | --delete Deletes users/groups from the quota storage.\n" " Printers are never deleted.\n" " \n" " -c | --charge p[,j] Sets the price per page and per job to charge\n" " for a particular printer. Job price is optional.\n" " If both are to be set, separate them with a comma.\n" " Floating point values are allowed.\n" " \n" " -o | --overcharge f Sets the overcharging factor applied to the user \n" " when computing the cost of a print job. Positive or \n" " negative floating point values are allowed,\n" " this allows you to do some really creative\n" " things like giving money to an user whenever\n" " he prints. The number of pages in a print job\n" " is not modified by this coefficient, only the\n" " cost of the job for a particular user.\n" " Only users have a coefficient.\n" " \n" " -i | --ingroups g1[,g2...] Puts the users into each of the groups\n" " listed, separated by commas. The groups\n" " must already exist in the Quota Storage.\n" " \n" " -u | --users Edit users print quotas, this is the default.\n" " \n" " -P | --printer p Edit quotas on printer p only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers. \n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" " -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n" " pg1, pg2, etc... which must already exist.\n" " A printer group is just like a normal printer,\n" " only that it is usually unknown from the printing\n" " system. Create printer groups exactly the same\n" " way that you create printers, then add other \n" " printers to them with this option.\n" " Accounting is done on a printer and on all\n" " the printer groups it belongs to, quota checking\n" " is done on a printer and on all the printer groups\n" " it belongs to.\n" " \n" " -g | --groups Edit users groups print quotas instead of users.\n" " \n" " -p | --prototype u|g Uses user u or group g as a prototype to set\n" " print quotas\n" " \n" " -n | --noquota Doesn't set a quota but only does accounting.\n" " \n" " -r | --reset Resets the actual page counter for the user\n" " or group to zero on the specified printers. \n" " The life time page counter is kept unchanged.\n" " \n" " -R | --hardreset Resets the actual and life time page counters\n" " for the user or group to zero on the specified \n" " printers. This is a shortcut for '--used 0'.\n" " \n" " -l | --limitby l Choose if the user/group is limited in " "printing \n" " by its account balance or by its page quota.\n" " The default value is 'quota'. Allowed values\n" " are 'quota' 'balance' 'quota-then-balance' and\n" " 'balance-then-quota'.\n" " WARNING : quota-then-balance and balance-then-quota\n" " are not yet implemented.\n" " \n" " -b | --balance b Sets the user's account balance to " "b. \n" " Account balance may be increase or decreased\n" " if b is prefixed with + or -.\n" " WARNING : when decreasing account balance,\n" " the total paid so far by the user is decreased\n" " too.\n" " Groups don't have a real balance, but the\n" " sum of their users' account balance.\n" " \n" " -S | --softlimit sl Sets the quota soft limit to sl " "pages. \n" " \n" " -H | --hardlimit hl Sets the quota hard limit to hl pages.\n" "\n" " -U | --used usage Sets the pagecounters for the user to usage pages;\n" " useful for migrating users from a different system\n" " where they have already used some pages. Actual\n" " and Life Time page counters may be increased or " "decreased\n" " if usage is prefixed with + or -.\n" " WARNING : BOTH page counters are modified in all " "cases,\n" " so be careful.\n" " NB : if 'usage' equals '0', then the action taken is\n" " the same as if --hardreset was used.\n" "\n" " user1 through userN and group1 through groupN can use wildcards\n" " if the --add option is not set.\n" " \n" "examples : \n" "\n" " $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n" " \n" " This will add users john, paul, george and ringo to the quota\n" " database, and set their print quotas to the same values than user \n" " jerome. User jerome must already exist.\n" " User ringo's email address will also be set to 'ringo@example.com'\n" " \n" " $ edpykota --printer lp -S 50 -H 60 jerome\n" " \n" " This will set jerome's print quota on the lp printer to a soft limit\n" " of 50 pages, and a hard limit of 60 pages. If either user jerome or\n" " printer lp doesn't exist on the Quota Storage Server then nothing is " "done.\n" "\n" " $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n" " \n" " Same as above, but if either user jerome or printer lp doesn't exist \n" " on the Quota Storage Server they are automatically added. Also\n" " user jerome is put into the groups \"coders\" and \"it\" which must\n" " already exist in the Quota Storage.\n" " \n" " $ edpykota -g -S 500 -H 550 financial support \n" " \n" " This will set print quota soft limit to 500 pages and hard limit\n" " to 550 pages for groups financial and support on all printers.\n" " \n" " $ edpykota --reset jerome \"jo*\"\n" " \n" " This will reset jerome's page counter to zero on all printers, as\n" " well as every user whose name begins with 'jo'.\n" " Their life time page counter on each printer will be kept unchanged.\n" " You can also reset the life time page counters by using the\n" " --hardreset | -R command line option.\n" " \n" " $ edpykota --printer hpcolor --noquota jerome\n" " \n" " This will tell PyKota to not limit jerome when printing on the \n" " hpcolor printer. All his jobs will be allowed on this printer, but \n" " accounting of the pages he prints will still be kept.\n" " Print Quotas for jerome on other printers are unchanged.\n" " \n" " $ edpykota --limitby balance jerome\n" " \n" " This will tell PyKota to limit jerome by his account's balance\n" " when printing.\n" " \n" " $ edpykota --balance +10.0 jerome\n" " \n" " This will increase jerome's account balance by 10.0 (in your\n" " own currency). You can decrease the account balance with a\n" " dash prefix, and set it to a fixed amount with no prefix.\n" " \n" " $ edpykota --delete jerome rachel\n" " \n" " This will completely delete jerome and rachel from the Quota Storage\n" " database. All their quotas and jobs will be deleted too.\n" " \n" " $ edpykota --printer lp --charge 0.1\n" " \n" " This will set the page price for printer lp to 0.1. Job price\n" " will not be changed.\n" " \n" " $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n" " \n" " This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n" " When printing either on hplj1 or hplj2, print quota will also be \n" " checked and accounted for on virtual printers Laser and HP.\n" " \n" " $ edpykota --overcharge 2.5 poorstudent\n" " \n" " This will overcharge the poorstudent user by a factor of 2.5.\n" " \n" " $ edpykota --overcharge -1 jerome\n" " \n" " User jerome will actually earn money whenever he prints.\n" " \n" " $ edpykota --overcharge 0 boss\n" " \n" " User boss can print at will, it won't cost him anything because the\n" " cost of each print job will be multiplied by zero before charging\n" " his account.\n" "\n" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2 of the License, or\n" "(at your option) any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n" "\n" "Please e-mail bugs to: %s" msgstr "" msgid "You're not allowed to use this command." msgstr "" #, python-format msgid "Invalid used value %s." msgstr "" #, python-format msgid "Invalid softlimit value %s." msgstr "ค่า %s ของ softlimit ไม่ถูกต้อง" #, python-format msgid "Invalid hardlimit value %s." msgstr "ค่า %s ของ hardlimitไม่ถูกต้อง " #, python-format msgid "Hard limit %i is less than soft limit %i, values will be exchanged." msgstr "ค่า Hard limit %i มีค่าน้อยกว่า soft limit %i กรุณาแก้ไข" #, python-format msgid "Invalid overcharge value %s" msgstr "" #, python-format msgid "Invalid balance value %s" msgstr "ยอดเงินคงเหลือไม่ถูกต้อง %s" #, python-format msgid "Invalid charge amount value %s" msgstr "อัตราค่าบริการไม่ถูกต้อง %s" #, python-format msgid "Invalid limitby value %s" msgstr "ค่าการจำกัด %s ไม่ถูกต้อง" #, python-format msgid "Impossible to add printer %s" msgstr "ไม่สามารถทำการเพิ่มเครื่องพิมพ์ได้" #, python-format msgid "Invalid printer name %s" msgstr "ชื่อเครื่องพิมพ์ %s ไม่ถูกต้อง" #, python-format msgid "There's no printer matching %s" msgstr "ไม่พบเครื่องพิมพ์ %s ที่ใช้งานได้" msgid "You have to pass user or group names on the command line" msgstr "คุณได้รับการผ่านผู้ใช้ หรือกลุ่มผู้ใช้บนคอมมานด์ไลน์" #, python-format msgid "Prototype object %s not found in Quota Storage." msgstr "ไม่พบวัตถุต้นแบบ %s ในโคว้ต้าพื้นที่" #, python-format msgid "Prototype %s not found in Quota Storage for printer %s." msgstr "ไม่พบต้นแบบ %s ในโคว้ต้าพื้นที่สำหรับเครื่องพิมพ์ %s " #, python-format msgid "Undefined hard limit set to soft limit (%s) on printer %s." msgstr "ไม่ได้ทำการตั้งค่า hard limit ถึง soft limit (%s) บนเครื่องพิมพ์ %s" #, python-format msgid "Undefined soft limit set to hard limit (%s) on printer %s." msgstr "ไม่ได้ทำการตั้งค่า soft limit ถึง hard limit (%s) บนเครื่องพิมพ์ %s" #, python-format msgid "Invalid email address %s" msgstr "email address %s ไม่ถูกต้อง" #, python-format msgid "Unknown group %s" msgstr "" #, python-format msgid "Unknown user %s" msgstr "" #, python-format msgid "Invalid group name %s" msgstr "ชื่อกลุ่มผู้ใช้ %s ไม่ถูกต้อง" #, python-format msgid "Invalid user name %s" msgstr "ชื่อผู้ใช้ %s ไม่ถูกต้อง" #, python-format msgid "Quota not found for object %s on printer %s." msgstr "ไม่พบโควต้าในการพิมพ์สำหรับ %s บนเครื่องพิมพ์ %s" #, python-format msgid "Group %s not found in the PyKota Storage." msgstr "ไม่พบกลุ่มผู้ใช้ %s ในส่วนเก็บข้อมูลของ PyKota" msgid "incompatible options, see help." msgstr "ตัวเลือกไม่เหมาะสม, กรุณาดูจากส่วนช่วยเหลือ" msgid "Software accounting already done in first pass. Ignoring." msgstr "พบมีซอฟต์แวร์ระบบบัญชีสมาชิกแล้วในส่วนแรก ข้ามไป" msgid "Hardware accounting already done in first pass. Ignoring." msgstr "พบมีฮาร์ดแวร์ระบบบัญชีสมาชิกแล้วในส่วนแรก ข้ามไป" msgid "Job size and price now set in history." msgstr "" #, python-format msgid "" "pkbanner v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels " "Libres\n" "\n" "Generates banners.\n" "\n" "command line usage :\n" "\n" " pkbanner [options] [more info]\n" "\n" "options :\n" "\n" " -v | --version Prints pkbanner's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -l | --logo img Use the image as the banner's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" " \n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" " \n" " -s | --savetoner s Sets the text luminosity factor to s%%. This can be \n" " used to save toner. The default value is 0, which\n" " means that no toner saving will be done.\n" " \n" " -u | --url u Uses u as an url to be written at the bottom of \n" " the banner page. The default url is :\n" " http://www.librelogiciel.com/software/\n" " \n" "examples : \n" "\n" " Using pkbanner directly from the command line is not recommended,\n" " excepted for testing purposes. You should use pkbanner in the\n" " 'startingbanner' or 'endingbanner' directives in pykota.conf\n" " \n" " startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n" " \n" " With such a setting in pykota.conf, all print jobs will be \n" " prefixed with an A4 banner with no logo, and text luminosity will\n" " be increased by 75%%. The PostScript output will be directly sent\n" " to your printer.\n" " \n" " You'll find more examples in the sample configuration file included \n" " in PyKota.\n" " \n" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2 of the License, or\n" "(at your option) any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n" "\n" "Please e-mail bugs to: %s" msgstr "" msgid "Unknown" msgstr "" msgid "Username" msgstr "" msgid "More Info" msgstr "" msgid "Job" msgstr "" msgid "Date" msgstr "วันที่" msgid "Allowed" msgstr "" msgid "Denied" msgstr "" msgid "Allowed with Warning" msgstr "" msgid "Result" msgstr "" msgid "Title" msgstr "ชื่อเรื่อง" msgid "Filename" msgstr "ชื่อแฟ้มข้อมูล" #, python-format msgid "Pages printed so far on %s" msgstr "" msgid "Account balance" msgstr "" msgid "Soft Limit" msgstr "" msgid "Hard Limit" msgstr "" msgid "Date Limit" msgstr "" msgid "Allowed range is (0..99)" msgstr "" #, python-format msgid "Invalid 'savetoner' option %s : %s" msgstr "" #, python-format msgid "Invalid 'pagesize' option %s, defaulting to A4." msgstr "" #, python-format msgid "" "pkhint v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" "A tool to give hints on what accounting method is best for each printer.\n" "\n" "command line usage :\n" "\n" " pkhint [options] [printer1 printer2 printer3 ... printerN] \n" msgstr "" "\n" "\n" "กรุณาติดต่อผู้ดูแลระบบ :\n" "\n" "\t%s - <%s>\n" #, python-format msgid "Unable to match user %s on printer %s, applying default policy (%s)" msgstr "ไม่พบชื่อผู้ใช้ %s บนเครื่องพิมพ์ %s, ตรวจสอบกฏการใช้งานเบื้องต้น (%s)" #, python-format msgid "" "Unable to find user %s's account balance, applying default policy (%s) for " "printer %s" msgstr "ไม่พบยอดเงินของผู้ใช้ %s, ตรวจสอบกฏการใช้งานเบื้องต้น(%s) ของ เครื่องพิมพ์ %s" #, python-format msgid "User %s will not be charged for printing." msgstr "" #, python-format msgid "Print Quota exceeded for group %s on printer %s" msgstr "ขออภัย! โควต้าในการพิมพ์ของกลุ่ม %s บนเครื่องพิมพ์ %s หมดแล้ว" msgid "Print Quota" msgstr "โควต้าในการพิมพ์" msgid "Print Quota Exceeded" msgstr "โควต้าในการพิมพ์เกินแล้ว" #, python-format msgid "Print Quota low for group %s on printer %s" msgstr "โควต้าในการพิมพ์ของกลุ่ม %s บนเครื่องพิมพ์ %s ใกล้หมดแล้ว" #, python-format msgid "Print Quota exceeded for user %s on printer %s" msgstr "โควต้าในการพิมพ์ของ %s บนเครื่องพิมพ์ %s หมดแล้ว" #, python-format msgid "Print Quota low for user %s on printer %s" msgstr "โควต้าในการพิมพ์ของ %s บนเครื่องพิมพ์ %s ใกล้หมดแล้ว" msgid "Print Quota Low" msgstr "โควต้าในการพิมพ์ใกล้หมดแล้ว" #, python-format msgid "Printing system %s, args=%s" msgstr "ระบบการพิมพ์ %s, args=%s" #, python-format msgid "Unable to precompute the job's size with the generic PDL analyzer : %s" msgstr "ไม่สามารถทำการคำนวณขนาดของงานได้ด้วย PDL analyzer : %s" #, python-format msgid "SIGTERM received, job %s cancelled." msgstr "ได้รับค่า SIGTERM , งาน %s ถูกยกเลิก." msgid "Printer hostname undefined, set to 'localhost'" msgstr "ไม่ได้ตั้งชื่อเครื่องพิมพ์, กรุณาตั้งเป็น 'localhost'" #, python-format msgid "Printing system unknown, args=%s" msgstr "ไม่ทราบระบบการพิมพ์, args=%s" #, python-format msgid "" "Printer %s not registered in the PyKota system, applying external policy (%" "s) for printer %s" msgstr "" "เครื่องพิมพ์ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota ,ลงทะเบียนในส่วนกฏการใช้งานภายนอก (%" "s) สำหรับเครื่องพิมพ์ %s" #, python-format msgid "" "User %s not registered in the PyKota system, applying external policy (%s) " "for printer %s" msgstr "" "ผู้ใช้ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota, ,ลงทะเบียนในส่วนกฏการใช้งานภายนอก (%s) " "สำหรับเครื่องพิมพ์ %s" #, python-format msgid "" "User %s doesn't have quota on printer %s in the PyKota system, applying " "external policy (%s) for printer %s" msgstr "" "ผู้ใช้ %s ไม่มีโควต้าในการพิมพ์บนเครื่องพิมพ์ %s ในระบบของ PyKota, " "ลงทะเบียนในส่วนกฏการใช้งานภายนอก (%s) สำหรับเครื่องพิมพ์ %s" #, python-format msgid "" "External policy %s for printer %s produced an error. Job rejected. Please " "check PyKota's configuration files." msgstr "" "กฏการใช้งานภายนอก %s สำหรับเครื่องพิมพ์ %s แจ้งข้อผิดพลาด. ยกเลิกการทำงาน. " "กรุณาตรวจสอบไฟล์คอนฟิกกุเรชั่นของ PyKota" #, python-format msgid "" "Printer %s not registered in the PyKota system, applying default policy (%s)" msgstr "" "เครื่องพิมพ์ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota, ลงทะเบียนในส่วนกฏการใช้งานเบื้องต้น (%" "s)" #, python-format msgid "" "User %s not registered in the PyKota system, applying default policy (%s) " "for printer %s" msgstr "" "ผู้ใช้ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota, ลงทะเบียนในส่วนกฏการใช้งานเบื้องต้น (%s) " "สำหรับเครื่องพิมพ์ %s" #, python-format msgid "" "User %s doesn't have quota on printer %s in the PyKota system, applying " "default policy (%s)" msgstr "" "ผู้ใช้ %s ไม่มีโควต้าในการพิมพ์บนเครื่องพิมพ์ %s ในระบบของ PyKota , ลงทะเบียน " "ในส่วนกฏการใช้งานเบื้องต้น (%s)" #, python-format msgid "" "Printer %s still not registered in the PyKota system, job will be rejected" msgstr "เครื่องพิมพ์ %s ยังคงไม่ได้ลงทะเบียนในระบบ PyKota, งานที่สั่งจะถูกยกเลิก" #, python-format msgid "" "User %s still not registered in the PyKota system, job will be rejected on " "printer %s" msgstr "ผู้ใช้ %s ยังคงไม่ได้ลงทะเบียนในระบบ PyKota, งานที่สั่งจะถูกยกเลิก printer %s" #, python-format msgid "" "User %s still doesn't have quota on printer %s in the PyKota system, job " "will be rejected" msgstr "" "ผู้ใช้ %s ยังคงไม่มีโควต้าในการพิมพ์บนเครื่องพิมพ์ %s ในระบบ PyKota ,งานที่สั่งจะถูกยกเลิก " #, python-format msgid "A problem occured while reading printer %s's internal page counter." msgstr "" #, python-format msgid "Retrieving printer %s's page counter from database instead." msgstr "" #, python-format msgid "" "Couldn't retrieve printer %s's internal page counter either before or after " "printing." msgstr "" #, python-format msgid "Job's size forced to 1 page for printer %s." msgstr "" #, python-format msgid "No previous job in database for printer %s." msgstr "" #, python-format msgid "Inconsistent values for printer %s's internal page counter." msgstr "" #, python-format msgid "Unknown printer address in HARDWARE(%s) for printer %s" msgstr "ไม่พบที่อยู่ของเครื่องพิมพ์ในอุปกรณ์ (%s) สำหรับเครื่องพิมพ์ %s" #, python-format msgid "Launching HARDWARE(%s)..." msgstr "เริ่มการทำงานของอุปกรณ์ (%s)..." #, python-format msgid "SIGTERM was sent to hardware accounter %s (pid: %s)" msgstr "สัญญาณ SIGTERM ถูกส่งไปยังอุปกรณ์ระบบบัญชีสมาชิก %s (pid: %s)" #, python-format msgid "Line [%s] skipped in accounter's output. Trying again..." msgstr "" #, python-format msgid "Hardware accounter %s exit code is %s" msgstr "" #, python-format msgid "Unable to query printer %s via HARDWARE(%s)" msgstr "ไม่สามารค้นหาเครื่องพิมพ์ %s โดยผ่านอุปกรณ์(%s)" #, python-format msgid "Problem during connection to %s:%s : %s" msgstr "" #, python-format msgid "Problem while sending PJL query to %s:%s : %s" msgstr "" #, python-format msgid "Waiting for printer %s to be printing..." msgstr "" #, python-format msgid "Waiting for printer %s's idle status to stabilize..." msgstr "" #, python-format msgid "" "PJL querying stage interrupted. Using latest value seen for internal page " "counter (%s) on printer %s." msgstr "" #, python-format msgid "Network error while doing SNMP queries on printer %s : %s" msgstr "" #, python-format msgid "SNMP message decoding error for printer %s : %s" msgstr "" #, python-format msgid "Problem encountered while doing SNMP queries on printer %s : %s" msgstr "" #, python-format msgid "" "SNMP querying stage interrupted. Using latest value seen for internal page " "counter (%s) on printer %s." msgstr "" #, python-format msgid "Launching SOFTWARE(%s)..." msgstr "เริ่มการทำงานของซอฟต์แวร์(%s)..." #, python-format msgid "Unable to compute job size with accounter %s" msgstr "ไม่สามารถคำนวณขนาดงานได้ด้วยระบบสมาชิก %s" #, python-format msgid "Problem while waiting for software accounter pid %s to exit : %s" msgstr "เกิดปัญหาจากการคอยซอฟต์แวร์ระบบสมาชิก pid %s เพื่อออก : %s" #, python-format msgid "Software accounter %s exit code is %s" msgstr "ซอฟต์แวร์ระบบสมาชิก %s ที่สั่งการออกคือ %s" msgid "Totals may be inaccurate if some users are members of several groups." msgstr "จำนวนรวมอาจไม่ถูกต้อง หากผู้ใช้บางท่านเป็นสมาชิกของกลุ่มหลายกลุ่ม." #, python-format msgid "" "Search base %s doesn't seem to exist. Probable misconfiguration. Please " "double check /etc/pykota/pykota.conf : %s" msgstr "" "ผลการค้นหา %s ไม่พบ. อาจมีการตั้งค่าไม่ถูกต้อง กรุณา ตรวสอบ /etc/pykota/pykota.conf : %" "s อีกครั้ง" #, python-format msgid "Search for %s(%s) from %s(scope=%s) returned no answer." msgstr "ผลการค้นหา %s(%s) จาก %s(scope=%s) คือ ไม่พบสิ่งที่ค้น." #, python-format msgid "Problem adding LDAP entry (%s, %s)" msgstr "เกิดปัญหาในการเพิ่มข้อมูลเข้าสู่ LDAP (%s, %s)" #, python-format msgid "Problem deleting LDAP entry (%s)" msgstr "เกิดปัญหาในการลบข้อมูลจาก LDAP (%s, %s)" #, python-format msgid "Problem modifying LDAP entry (%s, %s)" msgstr "เกิดปัญหาในการแก้ใขข้อมูลใน LDAP (%s, %s)" #, python-format msgid "" "No pykotaAccountBalance object found for user %s. Did you create LDAP " "entries manually ?" msgstr "" #, python-format msgid "" "Unable to find an existing objectClass %s entry with %s=%s to attach " "pykotaAccount objectClass" msgstr "" "ไม่สามารถค้นพบออปเจ็กคลาส %s ที่เข้าถึงด้วย %s=%s เพื่อแนบกับ ระบบสมาชิก Pykota " "ออปเจ็กคลาส" #, python-format msgid "%s. A new entry will be created instead." msgstr "" #, python-format msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s" msgstr "ไม่สามารถค้นพบสิ่งใดที่เข้าถึงเพื่อเชื่อมต่อกับ pykotaGroup ออปเจ็กคลาส %s" msgid "Hidden because of privacy concerns" msgstr "" #~ msgid "" #~ "Group used soft hard balance grace total " #~ "paid" #~ msgstr "" #~ "กลุ่ม ใช้ไป soft hard ยอดเงิน grace รวม ชำระ" #~ msgid "" #~ "User used soft hard balance grace total " #~ "paid" #~ msgstr "" #~ "ผู้ใช้ ใช้ไป soft hard ยอดเงิน grace รวม ชำระ"