# PyKota
# 
# PyKota : Print Quotas for CUPS and LPRng
# 
# (c) 2003-2004 Jerome Alet <alet@librelogiciel.com>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
# 
# $Id$
# 
# PyKota translation master file.
# Copyright (c) 2003-2004 Conseil Internet & Logiciels Libres
# Jerome Alet <alet@librelogiciel.com>, 2003-2004.
# 
msgid ""
msgstr ""
"Project-Id-Version: PyKota v1.20\n"
"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
"POT-Creation-Date: 2004-10-11 14:49+0200\n"
"PO-Revision-Date: 2004-07-21 15:35:00+0100\n"
"Last-Translator: Suthep Yonpimai <tomzt@hotmail.com>\n"
"Language-Team: Thai <tomzt@hotmail.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=TIS-620\n"
"Content-Transfer-Encoding: 8bit\n"

#, python-format
msgid ""
"autopykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A tool to automate user account creation and initial balance setting.\n"
"\n"
"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
"\n"
"command line usage :\n"
"\n"
"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
"  OF AN external policy IN pykota.conf\n"
"  \n"
"  autopykota { -i | --initbalance value } \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints autopykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
"                       If the user already exists, actual balance is left\n"
"                       unmodified. If unset, the default value is 0.\n"
"                       \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid ""
"edpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A Print Quota editor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  edpykota [options] user1 user2 ... userN\n"
"  \n"
"  edpykota [options] group1 group2 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users and/or printers if they don't \n"
"                       exist on the Quota Storage Server.\n"
"                       \n"
"  -d | --delete        Deletes users/groups from the quota storage.\n"
"                       Printers are never deleted.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
"                       for a particular printer. Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point values are allowed.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
"                              listed, separated by commas. The groups\n"
"                              must already exist in the Quota Storage.\n"
"  \n"
"  -u | --users         Edit users print quotas, this is the default.\n"
"  \n"
"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers. \n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
"                       pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"  \n"
"  -g | --groups        Edit users groups print quotas instead of users.\n"
"                          \n"
"  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
"                       print quotas\n"
"                       \n"
"  -n | --noquota       Doesn't set a quota but only does accounting.\n"
"  \n"
"  -r | --reset         Resets the actual page counter for the user\n"
"                       or group to zero on the specified printers. \n"
"                       The life time page counter is kept unchanged.\n"
"                       \n"
"  -R | --hardreset     Resets the actual and life time page counters\n"
"                       for the user or group to zero on the specified \n"
"                       printers. \n"
"                       \n"
"  -l | --limitby l     Choose if the user/group is limited in "
"printing                     \n"
"                       by its account balance or by its page quota.\n"
"                       The default value is 'quota'. Allowed values\n"
"                       are 'quota' 'balance' 'quota-then-balance' and\n"
"                       'balance-then-quota'.\n"
"                       WARNING : quota-then-balance and balance-then-quota\n"
"                       are not yet implemented.\n"
"                       \n"
"  -b | --balance b     Sets the user's account balance to "
"b.                     \n"
"                       Account balance may be increase or decreased\n"
"                       if b is prefixed with + or -.\n"
"                       WARNING : when decreasing account balance,\n"
"                       the total paid so far by the user is decreased\n"
"                       too.\n"
"                       Groups don't have a real balance, but the\n"
"                       sum of their users' account balance.\n"
"                       \n"
"  -S | --softlimit sl  Sets the quota soft limit to sl "
"pages.                       \n"
"  \n"
"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
"  \n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
"  \n"
"  This will add users john, paul, george and ringo to the quota\n"
"  database, and set their print quotas to the same values than user \n"
"  jerome. User jerome must already exist.\n"
"  User ringo's email address will also be set to 'ringo@example.com'\n"
"  \n"
"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
"  \n"
"  This will set jerome's print quota on the lp printer to a soft limit\n"
"  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
"  printer lp doesn't exist on the Quota Storage Server then nothing is "
"done.\n"
"\n"
"  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
"  \n"
"  Same as above, but if either user jerome or printer lp doesn't exist \n"
"  on the Quota Storage Server they are automatically added. Also\n"
"  user jerome is put into the groups \"coders\" and \"it\" which must\n"
"  already exist in the Quota Storage.\n"
"            \n"
"  $ edpykota -g -S 500 -H 550 financial support            \n"
"  \n"
"  This will set print quota soft limit to 500 pages and hard limit\n"
"  to 550 pages for groups financial and support on all printers.\n"
"  \n"
"  $ edpykota --reset jerome \"jo*\"\n"
"  \n"
"  This will reset jerome's page counter to zero on all printers, as\n"
"  well as every user whose name begins with 'jo'.\n"
"  Their life time page counter on each printer will be kept unchanged.\n"
"  You can also reset the life time page counters by using the\n"
"  --hardreset | -R command line option.\n"
"  \n"
"  $ edpykota --printer hpcolor --noquota jerome\n"
"  \n"
"  This will tell PyKota to not limit jerome when printing on the \n"
"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
"  accounting of the pages he prints will still be kept.\n"
"  Print Quotas for jerome on other printers are unchanged.\n"
"  \n"
"  $ edpykota --limitby balance jerome\n"
"  \n"
"  This will tell PyKota to limit jerome by his account's balance\n"
"  when printing.\n"
"  \n"
"  $ edpykota --balance +10.0 jerome\n"
"  \n"
"  This will increase jerome's account balance by 10.0 (in your\n"
"  own currency). You can decrease the account balance with a\n"
"  dash prefix, and set it to a fixed amount with no prefix.\n"
"  \n"
"  $ edpykota --delete jerome rachel\n"
"  \n"
"  This will completely delete jerome and rachel from the Quota Storage\n"
"  database. All their quotas and jobs will be deleted too.\n"
"  \n"
"  $ edpykota --printer lp --charge 0.1\n"
"  \n"
"  This will set the page price for printer lp to 0.1. Job price\n"
"  will not be changed.\n"
"  \n"
"  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
"  \n"
"  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
"  When printing either on hplj1 or hplj2, print quota will also be \n"
"  checked and accounted for on virtual printers Laser and HP.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "You're not allowed to use this command."
msgstr ""

#, python-format
msgid "Invalid softlimit value %s."
msgstr "ค่า %s ของ softlimit ไม่ถูกต้อง"

#, python-format
msgid "Invalid hardlimit value %s."
msgstr "ค่า %s ของ hardlimitไม่ถูกต้อง "

#, python-format
msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
msgstr "ค่า Hard limit %i มีค่าน้อยกว่า soft limit %i กรุณาแก้ไข"

#, python-format
msgid "Invalid balance value %s"
msgstr "ยอดเงินคงเหลือไม่ถูกต้อง %s"

#, python-format
msgid "Invalid charge amount value %s"
msgstr "อัตราค่าบริการไม่ถูกต้อง %s"

#, python-format
msgid "Invalid limitby value %s"
msgstr "ค่าการจำกัด %s ไม่ถูกต้อง"

#, python-format
msgid "Impossible to add printer %s"
msgstr "ไม่สามารถทำการเพิ่มเครื่องพิมพ์ได้"

#, python-format
msgid "Invalid printer name %s"
msgstr "ชื่อเครื่องพิมพ์ %s ไม่ถูกต้อง"

#, python-format
msgid "There's no printer matching %s"
msgstr "ไม่พบเครื่องพิมพ์ %s ที่ใช้งานได้"

msgid "You have to pass user or group names on the command line"
msgstr "คุณได้รับการผ่านผู้ใช้ หรือกลุ่มผู้ใช้บนคอมมานด์ไลน์"

#, python-format
msgid "Prototype %s not found in Quota Storage for printer %s."
msgstr "ไม่พบต้นแบบ %s ในโคว้ต้าพื้นที่สำหรับเครื่องพิมพ์ %s "

#, python-format
msgid "Prototype object %s not found in Quota Storage."
msgstr "ไม่พบวัตถุต้นแบบ %s ในโคว้ต้าพื้นที่"

#, python-format
msgid "Undefined hard limit set to soft limit (%s) on printer %s."
msgstr "ไม่ได้ทำการตั้งค่า hard limit ถึง soft limit (%s) บนเครื่องพิมพ์ %s"

#, python-format
msgid "Undefined soft limit set to hard limit (%s) on printer %s."
msgstr "ไม่ได้ทำการตั้งค่า soft limit ถึง hard limit (%s) บนเครื่องพิมพ์ %s"

#, python-format
msgid "Invalid email address %s"
msgstr "email address %s ไม่ถูกต้อง"

#, python-format
msgid "Invalid group name %s"
msgstr "ชื่อกลุ่มผู้ใช้ %s ไม่ถูกต้อง"

#, python-format
msgid "Invalid user name %s"
msgstr "ชื่อผู้ใช้ %s ไม่ถูกต้อง"

#, python-format
msgid "Quota not found for object %s on printer %s."
msgstr "ไม่พบโควต้าในการพิมพ์สำหรับ %s บนเครื่องพิมพ์ %s"

#, python-format
msgid "Group %s not found in the PyKota Storage."
msgstr "ไม่พบกลุ่มผู้ใช้ %s ในส่วนเก็บข้อมูลของ PyKota"

msgid "incompatible options, see help."
msgstr "ตัวเลือกไม่เหมาะสม, กรุณาดูจากส่วนช่วยเหลือ"

#, python-format
msgid ""
"pykosd v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"An OSD quota monitor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pykosd [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
"                       triplet, for example #FF0000 is 100%% red.\n"
"                       Defaults to 100%% green (#00FF00).\n"
"                       \n"
"  -d | --duration d    Sets the duration of the display in seconds. \n"
"                       Defaults to 3 seconds.\n"
"                       \n"
"  -f | --font f        Sets the font to use for "
"display.                      \n"
"                       Defaults to the Python OSD library's default.\n"
"  \n"
"  -l | --loop n        Sets the number of times the info will be displayed.\n"
"                       Defaults to 0, which means loop forever.\n"
"                       \n"
"  -s | --sleep s       Sets the sleeping duration between two displays \n"
"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
"                       \n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykosd -s 60 --loop 5\n"
"  \n"
"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
"  and will last for 3 seconds (the default) each time. After five\n"
"  iterations, the program will exit.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid duration option %s"
msgstr "การตั้งค่าช่วงเวลาไม่ถูกต้อง"

#, python-format
msgid "Invalid loop option %s"
msgstr "กาตั้งค่าการทำซ้ำไม่ถูกต้อง"

#, python-format
msgid "Invalid sleep option %s"
msgstr "การตั้งค่าการพักเครื่องไม่ถูกต้อง"

#, python-format
msgid "Invalid color option %s"
msgstr "การตั้งค่าสีไม่ถูกต้อง"

#, python-format
msgid "User %s doesn't exist in PyKota's database"
msgstr "ไม่มีชื่อผู้ใช้ %s ในฐานข้อมูลของ PyKota"

#, python-format
msgid "Pages used on %s : %s"
msgstr "จำนวนหน้าที่ใช้ไปบน %s : %s"

#, python-format
msgid "PyKota Units left : %.2f"
msgstr "หน่วยที่เหลือของ PyKota : %.2f"

#, python-format
msgid ""
"warnpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Sends mail to users over print quota.\n"
"\n"
"command line usage :\n"
"\n"
"  warnpykota  [options]  [names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints warnpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Warns users over their print quota, this is the \n"
"                       default.\n"
"  \n"
"  -g | --groups        Warns users whose groups quota are over limit.\n"
"  \n"
"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ warnpykota --printer lp\n"
"  \n"
"  This will warn all users of the lp printer who have exceeded their\n"
"  print quota.\n"
"\n"
"  $ warnpykota \n"
"  \n"
"  This will warn all users  who have exceeded their print quota on\n"
"  any printer.\n"
"\n"
"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
"  \n"
"  This will warn all users of groups which names begins with \"dev\" and\n"
"  who have exceeded their print quota on any printer which name begins \n"
"  with \"laserjet\"\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "Job contains no data. Printing is denied."
msgstr "ไม่พบข้อมูลในงาน ปฏิเสธการพิมพ์ "

msgid "Job accounting begins."
msgstr "เริ่มการทำงานของสมาชิก"

msgid "Job accounting ends."
msgstr "จบการทำงานของสมาชิก"

msgid "Job size forced to 0 because printing is denied."
msgstr "ขนาดของงานถูกเปลี่ยนเป็น 0 เพราะปฏิเสธการพิมพ์"

#, python-format
msgid "Job size : %i"
msgstr "ขนาดงาน : %i"

#, python-format
msgid "Updating user %s's quota on printer %s"
msgstr "กำลังปรับปรุงโควต้าของผู้ใช้ %s บนเครื่องพิมพ์ %s"

msgid "Job added to history."
msgstr "ส่งงานเข้าสู่ประวัติ"

#, python-format
msgid "File number %s unregistered twice from polling object, ignored."
msgstr "แฟ้มข้อมูลหมายเลข %s ไม่ได้รับการลงทะเบียน 2 ครั้งจากขั้นเตรียมการ ,ข้ามไป"

#, python-format
msgid "SIGTERM was sent to real backend %s (pid: %s)"
msgstr "สัญญาณ SIGTERM ถูกส่งไปยังเครื่องรับ %s (pid: %s)"

#, python-format
msgid "CUPS backend %s died abnormally."
msgstr "CUPS ของเครื่องรับ %s มีการหยุดทำงานแบบผิดปรกติ"

#, python-format
msgid ""
"dumpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Dumps PyKota database's content.\n"
"\n"
"command line usage :\n"
"\n"
"  dumpykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints dumpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
"                       \n"
"                         - history : dumps the jobs history.\n"
"                         - users : dumps users.\n"
"                         - groups : dumps user groups.\n"
"                         - printers : dump printers.\n"
"                         - upquotas : dump user quotas.\n"
"                         - gpquotas : dump user groups quotas.\n"
"                         - payments : dumps user payments.\n"
"                         - pmembers : dumps printer groups members.\n"
"                         - umembers : dumps user groups members.\n"
"                         \n"
"                       NB : the -d | --data command line option   \n"
"                       is MANDATORY.\n"
"  \n"
"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
"                       the format is to dump datas in the csv format (comma\n"
"                       separated values). All data dumped is between double\n"
"                       quotes. Allowed formats are :\n"
"                       \n"
"                         - csv : separate datas with commas\n"
"                         - ssv : separate datas with semicolons\n"
"                         - tsv : separate datas with tabs\n"
"                         - xml : dump data as XML\n"
"                         \n"
"  -o | --output fname  All datas will be dumped to the file instead of\n"
"                       to the standard output. The special '-' filename\n"
"                       is the default value and means stdout.\n"
"                       WARNING : existing files are truncated !\n"
"  \n"
"Examples :\n"
"\n"
"  $ dumpykota --data history --format csv >myfile.csv\n"
"  \n"
"  This dumps the history in a comma separated values file, for possible\n"
"  use in a spreadsheet.\n"
"  \n"
"  $ dumpykota --data users --format xml -o users.xml\n"
"  \n"
"  Dumps all users datas to the users.xml file.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --data command line option, see help."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --format command line option, see help."
msgstr ""

msgid "XML output is disabled because the jaxml module is not available."
msgstr ""

msgid "PyKota data dumper failed : I/O error"
msgstr ""

msgid "The -d | --data command line option is mandatory, see help."
msgstr ""

msgid "Too many arguments, see help."
msgstr ""

msgid "Software accounting already done in first pass. Ignoring."
msgstr "พบมีซอฟต์แวร์ระบบบัญชีสมาชิกแล้วในส่วนแรก ข้ามไป"

msgid "Hardware accounting already done in first pass. Ignoring."
msgstr "พบมีฮาร์ดแวร์ระบบบัญชีสมาชิกแล้วในส่วนแรก ข้ามไป"

#, python-format
msgid ""
"pkhint v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A tool to give hints on what accounting method is best for each printer.\n"
"\n"
"command line usage :\n"
"\n"
"  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkhint's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
"  \n"
"  Will analyze your printing system to test which accounter\n"
"  is the best for each of the defined printer which\n"
"  name matches one of the parameters.\n"
"  \n"
"  If you don't pass any argument on the command line, all\n"
"  printers will be analyzed.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid DeviceURI : %s"
msgstr "ค่า DeviceURI : %s ไม่ถูกต้อง"

msgid ""
"\n"
"Please wait while pkhint analyzes your printing system's configuration..."
msgstr ""
"\n"
"กรุณารอ pkhint จะทำการวิเคราะห์การตั้งค่าระบบการพิมพ์ของท่าน..."

#, python-format
msgid "Unknown device %s for printer %s"
msgstr "ไม่รู้จักอุปกรณ์ %s สำหรับเครื่องพิมพ์ %s"

msgid ""
"\n"
"Put the following lines into your /etc/pykota/pykota.conf file :\n"
msgstr ""
"\n"
"กรุณาใส่บรรทัดต่อไปนี้ลงในแฟ้ม /etc/pykota/pykota.conf file :\n"

msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
msgstr "# โปรดระวัง : ถ้าซอฟต์แวร์ระบบสมาชิกมีข้อแนะนำ"

msgid "# that hardware accounting wouldn't work, this only means that PyKota"
msgstr "# ฮาร์ดแวร์ระบบสมาชิกไม่สามารถทำงานได้, ปัญหานี้อาจเกิดเฉพาะกับ PyKota"

msgid "# wasn't able to autodetect which hardware accounting method to use."
msgstr "# ตรวจไม่พบฮาร์ดแวร์ระบบสมาชิกที่สามารถใช้ได้"

#, python-format
msgid ""
"pkprinters v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A Printers Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds printers if they don't exist on the Quota \n"
"                       Storage Server. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes printers from the quota storage.\n"
"  \n"
"  -D | --description   Adds a textual description to printers.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
"                       Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point and negative values are allowed.\n"
"  \n"
"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
"                       groups pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"                       If the --remove option below is not used, the \n"
"                       default action is to add printers to the specified\n"
"                       printer groups.\n"
"                       \n"
"  -l | --list          List informations about the printer(s) and the\n"
"                       printers groups it is a member of.\n"
"                       \n"
"  -r | --remove        In combination with the --groups option "
"above,                       \n"
"                       remove printers from the specified printers groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkprinters to not modify existing printers.\n"
"  \n"
"  printer1 through printerN can contain wildcards if the --add option \n"
"  is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
"hp8000\n"
"  \n"
"  Will create three printers named hp2100, hp2200 and hp8000.\n"
"  Their price per page will be set at 0.05 unit, and their price\n"
"  per job will be set at 0.1 unit. Units are in your own currency,\n"
"  or whatever you want them to mean.\n"
"  All of their descriptions will be set to the string \"HP Printer\".\n"
"  If any of these printers already exists, it will also be modified \n"
"  unless the -s|--skipexisting command line option is also used.\n"
"            \n"
"  $ pkprinters --delete \"*\"\n"
"  \n"
"  This will completely delete all printers and associated quota "
"information,\n"
"  as well as their job history. USE WITH CARE !\n"
"  \n"
"  $ pkprinters --groups Laser,HP \"hp*\"\n"
"  \n"
"  This will put all printers which name matches \"hp*\" into printers "
"groups \n"
"  Laser and HP, which MUST already exist.\n"
"  \n"
"  $ pkprinters --groups LexMark --remove hp2200\n"
"  \n"
"  This will remove the hp2200 printer from the LexMark printer group.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Printer %s already exists, skipping."
msgstr "เครื่องพิมพ์ %s ได้ถูกติดตั้งแล้ว, ข้ามไป"

#, python-format
msgid "Printer %s already exists, will be modified."
msgstr "เครื่องพิมพ์ %s ได้ถูกติดตั้งแล้ว, ทำการแก้ใขหรือไม่"

msgid "in"
msgstr "ใน"

msgid "You have to pass printer groups names on the command line"
msgstr "คุณได้ผ่านชื่อกลุ่มเครื่องพิมพ์บนคอมมานด์ไลน์"

msgid "You have to pass printer names on the command line"
msgstr "คุณได้ผ่านชื่อเครื่องพิมพ์บนคอมมานด์ไลน์"

#, python-format
msgid ""
"pykotme v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Gives print quotes to users.\n"
"\n"
"command line usage :\n"
"\n"
"  pykotme  [options]  [files]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykotme's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykotme --printer apple file1.ps file2.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps and file2.ps \n"
"  which would be sent to the apple printer.\n"
"  \n"
"  $ pykotme --printer apple,hplaser <file1.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps as read from\n"
"  standard input, which would be sent to the apple or hplaser\n"
"  printer.\n"
"\n"
"  $ pykotme \n"
"  \n"
"  This will give a quote for a job consisting of what is on standard \n"
"  input. The quote will list the job size, and the price the job\n"
"  would cost on each printer.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Your account balance : %.2f"
msgstr "ยอดเงินคงเหลือของคุณ : %.2f"

#, python-format
msgid "Job size : %i pages"
msgstr "จำนวนงาน : %i หน้า"

#, python-format
msgid "Cost on printer %s : %.2f"
msgstr "ราคาการพิมพ์ของเครื่องพิมพ์ %s : %.2f"

#, python-format
msgid ""
"repykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Generates print quota reports.\n"
"\n"
"command line usage :\n"
"\n"
"  repykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints repykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Generates a report on users quota, this is \n"
"                       the default.\n"
"  \n"
"  -g | --groups        Generates a report on group quota instead of users.\n"
"  \n"
"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ repykota --printer lp\n"
"  \n"
"  This will print the quota status for all users who use the lp printer.\n"
"\n"
"  $ repykota \n"
"  \n"
"  This will print the quota status for all users on all printers.\n"
"  \n"
"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
"  \n"
"  This will print the quota status for user jerome and all users\n"
"  whose name begins with \"jo\" on all printers which name begins\n"
"  with \"laser\" or ends with \"pson\".\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Unsupported accounter backend %s"
msgstr "ระบบบัญชีสมาชิกไม่สนับสนุนการทำงาน %s"

#, python-format
msgid "Configuration file %s not found."
msgstr "ขอภัย! ไม่พบคอนฟิกไฟล์ %s"

#, python-format
msgid "Option %s not found in section global of %s"
msgstr "ไม่พบตัวเลือก %s ในหมวดทั่วไปของ %s "

#, python-format
msgid "Option %s not found in section %s of %s"
msgstr "ไม่พบตัวเลือก %s ในหมวด %s ของ %s"

#, python-format
msgid "Option logger only supports values in %s"
msgstr "ตัวเลือกบันทึกการทำงานสนับสนุนค่าเฉพาะใน %s"

#, python-format
msgid "Invalid accounter %s for printer %s"
msgstr "ระบบบัญชีสมาชิก %s สำหรับเครื่องพิมพ์ %s ไม่ถูกต้อง"

#, python-format
msgid "Option accounter in section %s only supports values in %s"
msgstr "ตัวเลือกระบบบัญชีสมาชิกในหมวด %s สนับสนุนเฉพาะค่าใน %s"

#, python-format
msgid "Option enforcement in section %s only supports values in %s"
msgstr "ตัวเลือก enforcement ในหมวด %s สนับสนุนเฉพาะค่าใน %s"

#, python-format
msgid "Option onaccountererror in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid policy %s for printer %s"
msgstr "กฏการใช้ %s สำหรับเครื่องพิมพ์ %s ไม่ถูกต้อง"

#, python-format
msgid "Option policy in section %s only supports values in %s"
msgstr "ตัวเลือกกฏการใช้ในหมวด %s สนับสนุนเฉพาะค่าใน %s"

#, python-format
msgid "Invalid option mailto %s for printer %s"
msgstr "ตัวเลือกส่งเมล์  %s สำหรับเครื่องพิมพ์ %s ไม่ถูกต้อง"

#, python-format
msgid "Option mailto in section %s only supports values in %s"
msgstr "ตัวเลือกส่งเมล์ในหมวด %s สนับสนุนเฉพาะค่าใน %s"

#, python-format
msgid "Invalid grace delay %s"
msgstr "ค่า grace delay %s ไม่ถูกต้อง"

#, python-format
msgid "Invalid poor man's threshold %s"
msgstr "ค่า poor man's threshold %s ไม่ถูกต้อง"

msgid ""
"Your Print Quota account balance is Low.\n"
"Soon you'll not be allowed to print anymore.\n"
"Please contact the Print Quota Administrator to solve the problem."
msgstr ""
"ขออภัย! ยอดเงินของท่านเหลือน้อย\n"
"ท่านจะไม่สามารพิมพ์เอกสารใดๆได้ในระยะเวลอันใกล้\n"
"กรุณาติดต่อผู้ดูแลระบบการพิมพ์เพื่อแก้ไขปัญหา"

#, python-format
msgid ""
"You are not allowed to print anymore because\n"
"your Print Quota is exceeded on printer %s."
msgstr ""
"ขออภัย! คุณไม่สามารถทำการพิมพ์สิ่งใดได้เนื่องจาก\n"
"สิทธิ์ในการพิมพ์ของคุณเกินกำหนดบนเครื่องพิมพ์ %s."

#, python-format
msgid ""
"You will soon be forbidden to print anymore because\n"
"your Print Quota is almost reached on printer %s."
msgstr ""
"ขออภัย! คุณจะไม่ได้รับอนุญาตให้ทำการพิมพ์ใดๆได้อีกเพราะ\n"
"โควต้าในการพิมพ์ของคุณใกล้หมดบนเครื่องพิมพ์ %s."

#, python-format
msgid "Unsupported logging subsystem %s"
msgstr "ระบบบันทึกการย่อยไม่สนับสนุนการทำงาน %s"

#, python-format
msgid "Report for %s quota on printer %s"
msgstr "รายงานสิทธิ์การพิมพ์สำหรับ %s บนเครื่องพิมพ์ %s"

#, python-format
msgid "Pages grace time: %i days"
msgstr "หน้า grace time : %i วัน"

#, python-format
msgid "Price per job: %.3f"
msgstr "ราคาต่องาน : %.3f"

#, python-format
msgid "Price per page: %.3f"
msgstr "ราคาต่อหน้า : %.3f "

msgid ""
"Group           used    soft    hard    balance grace         total       "
"paid"
msgstr ""
"กลุ่ม           ใช้ไป    soft    hard    ยอดเงิน grace         รวม       ชำระ"

msgid ""
"User            used    soft    hard    balance grace         total       "
"paid"
msgstr ""
"ผู้ใช้            ใช้ไป    soft    hard    ยอดเงิน grace         รวม       ชำระ"

msgid "unknown"
msgstr "ไม่ทราบข้อมูล"

#, python-format
msgid "Real : %s"
msgstr "เป็นจริง : %s"

#, python-format
msgid "Total : %9i"
msgstr "รวม : %9i"

#, python-format
msgid "Unsupported reporter backend %s"
msgstr "ระบบรายงานไม่สนับสนุน %s"

#, python-format
msgid "Unsupported quota storage backend %s"
msgstr "ระบบสิทธิ์ในการใช้พื้นที่ไม่สนับสนุน %s"

#, python-format
msgid "Impossible to connect to SMTP server : %s"
msgstr "ไม่สามารถติดต่อกับ SMTP เซิร์ฟเวอร์ได้"

#, python-format
msgid "Impossible to send mail to %s, error %s : %s"
msgstr "ไม่สามารถส่งเมล์ถึง %s, พบข้อผิดพลาด %s : %s"

#, python-format
msgid ""
"\n"
"\n"
"Please contact your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""
"\n"
"\n"
"กรุณาติดต่อผู้ดูแลระบบ :\n"
"\n"
"\t%s - <%s>\n"

#, python-format
msgid "Unable to match user %s on printer %s, applying default policy (%s)"
msgstr "ไม่พบชื่อผู้ใช้ %s บนเครื่องพิมพ์ %s, ตรวจสอบกฏการใช้งานเบื้องต้น (%s)"

#, python-format
msgid ""
"Unable to find user %s's account balance, applying default policy (%s) for "
"printer %s"
msgstr "ไม่พบยอดเงินของผู้ใช้ %s, ตรวจสอบกฏการใช้งานเบื้องต้น(%s) ของ เครื่องพิมพ์ %s"

#, python-format
msgid "Print Quota exceeded for group %s on printer %s"
msgstr "ขออภัย! โควต้าในการพิมพ์ของกลุ่ม %s บนเครื่องพิมพ์ %s หมดแล้ว"

msgid "Print Quota"
msgstr "โควต้าในการพิมพ์"

msgid "Print Quota Exceeded"
msgstr "โควต้าในการพิมพ์เกินแล้ว"

#, python-format
msgid "Print Quota low for group %s on printer %s"
msgstr "โควต้าในการพิมพ์ของกลุ่ม %s บนเครื่องพิมพ์ %s ใกล้หมดแล้ว"

#, python-format
msgid "Print Quota exceeded for user %s on printer %s"
msgstr "โควต้าในการพิมพ์ของ %s บนเครื่องพิมพ์ %s หมดแล้ว"

#, python-format
msgid "Print Quota low for user %s on printer %s"
msgstr "โควต้าในการพิมพ์ของ %s บนเครื่องพิมพ์ %s ใกล้หมดแล้ว"

msgid "Print Quota Low"
msgstr "โควต้าในการพิมพ์ใกล้หมดแล้ว"

#, python-format
msgid "Printing system %s, args=%s"
msgstr "ระบบการพิมพ์ %s, args=%s"

#, python-format
msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
msgstr "ไม่สามารถทำการคำนวณขนาดของงานได้ด้วย PDL analyzer : %s"

#, python-format
msgid "SIGTERM received, job %s cancelled."
msgstr "ได้รับค่า SIGTERM , งาน %s ถูกยกเลิก."

msgid "Printer hostname undefined, set to 'localhost'"
msgstr "ไม่ได้ตั้งชื่อเครื่องพิมพ์, กรุณาตั้งเป็น 'localhost'"

#, python-format
msgid "Printing system unknown, args=%s"
msgstr "ไม่ทราบระบบการพิมพ์, args=%s"

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying external policy (%"
"s) for printer %s"
msgstr ""
"เครื่องพิมพ์ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota ,ลงทะเบียนในส่วนกฏการใช้งานภายนอก (%"
"s) สำหรับเครื่องพิมพ์ %s"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying external policy (%s) "
"for printer %s"
msgstr ""
"ผู้ใช้ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota, ,ลงทะเบียนในส่วนกฏการใช้งานภายนอก (%s) "
"สำหรับเครื่องพิมพ์ %s"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"external policy (%s) for printer %s"
msgstr ""
"ผู้ใช้ %s ไม่มีโควต้าในการพิมพ์บนเครื่องพิมพ์ %s ในระบบของ PyKota, "
"ลงทะเบียนในส่วนกฏการใช้งานภายนอก (%s) สำหรับเครื่องพิมพ์ %s"

#, python-format
msgid ""
"External policy %s for printer %s produced an error. Job rejected. Please "
"check PyKota's configuration files."
msgstr ""
"กฏการใช้งานภายนอก %s สำหรับเครื่องพิมพ์ %s แจ้งข้อผิดพลาด. ยกเลิกการทำงาน. "
"กรุณาตรวจสอบไฟล์คอนฟิกกุเรชั่นของ PyKota"

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying default policy (%s)"
msgstr ""
"เครื่องพิมพ์ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota, ลงทะเบียนในส่วนกฏการใช้งานเบื้องต้น (%"
"s)"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying default policy (%s) "
"for printer %s"
msgstr ""
"ผู้ใช้ %s ยังไม่ได้ลงทะเบียนในระบบของ PyKota, ลงทะเบียนในส่วนกฏการใช้งานเบื้องต้น (%s) "
"สำหรับเครื่องพิมพ์ %s"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"default policy (%s)"
msgstr ""
"ผู้ใช้ %s ไม่มีโควต้าในการพิมพ์บนเครื่องพิมพ์ %s ในระบบของ PyKota , ลงทะเบียน "
"ในส่วนกฏการใช้งานเบื้องต้น (%s)"

#, python-format
msgid ""
"Printer %s still not registered in the PyKota system, job will be rejected"
msgstr "เครื่องพิมพ์ %s ยังคงไม่ได้ลงทะเบียนในระบบ PyKota, งานที่สั่งจะถูกยกเลิก"

#, python-format
msgid ""
"User %s still not registered in the PyKota system, job will be rejected on "
"printer %s"
msgstr "ผู้ใช้ %s ยังคงไม่ได้ลงทะเบียนในระบบ PyKota, งานที่สั่งจะถูกยกเลิก printer %s"

#, python-format
msgid ""
"User %s still doesn't have quota on printer %s in the PyKota system, job "
"will be rejected"
msgstr ""
"ผู้ใช้ %s ยังคงไม่มีโควต้าในการพิมพ์บนเครื่องพิมพ์ %s ในระบบ PyKota ,งานที่สั่งจะถูกยกเลิก "

#, python-format
msgid ""
"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
"double check /etc/pykota/pykota.conf : %s"
msgstr ""
"ผลการค้นหา %s ไม่พบ. อาจมีการตั้งค่าไม่ถูกต้อง กรุณา ตรวสอบ /etc/pykota/pykota.conf : %"
"s อีกครั้ง"

#, python-format
msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
msgstr "ผลการค้นหา %s(%s) จาก %s(scope=%s) คือ ไม่พบสิ่งที่ค้น."

#, python-format
msgid "Problem adding LDAP entry (%s, %s)"
msgstr "เกิดปัญหาในการเพิ่มข้อมูลเข้าสู่ LDAP (%s, %s)"

#, python-format
msgid "Problem deleting LDAP entry (%s)"
msgstr "เกิดปัญหาในการลบข้อมูลจาก LDAP (%s, %s)"

#, python-format
msgid "Problem modifying LDAP entry (%s, %s)"
msgstr "เกิดปัญหาในการแก้ใขข้อมูลใน LDAP (%s, %s)"

#, python-format
msgid ""
"No pykotaAccountBalance object found for user %s. Did you create LDAP "
"entries manually ?"
msgstr ""

#, python-format
msgid ""
"Unable to find an existing objectClass %s entry with %s=%s to attach "
"pykotaAccount objectClass"
msgstr ""
"ไม่สามารถค้นพบออปเจ็กคลาส %s ที่เข้าถึงด้วย %s=%s เพื่อแนบกับ ระบบสมาชิก Pykota "
"ออปเจ็กคลาส"

#, python-format
msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
msgstr "ไม่สามารถค้นพบสิ่งใดที่เข้าถึงเพื่อเชื่อมต่อกับ pykotaGroup ออปเจ็กคลาส %s"

msgid "Totals may be inaccurate if some users are members of several groups."
msgstr "จำนวนรวมอาจไม่ถูกต้อง หากผู้ใช้บางท่านเป็นสมาชิกของกลุ่มหลายกลุ่ม."

#, python-format
msgid "Network error while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "Problem encountered while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "Waiting for printer %s to be idle or printing..."
msgstr ""

#, python-format
msgid "Waiting for printer %s's idle status to stabilize..."
msgstr ""

#, python-format
msgid "Problem during connection to %s:%s : %s"
msgstr ""

#, python-format
msgid "Problem while sending PJL query to %s:%s : %s"
msgstr ""

#, python-format
msgid "A problem occured while reading printer %s's internal page counter."
msgstr ""

#, python-format
msgid "Retrieving printer %s's page counter from database instead."
msgstr ""

#, python-format
msgid ""
"Couldn't retrieve printer %s's internal page counter either before or after "
"printing."
msgstr ""

#, python-format
msgid "Job's size forced to 1 page for printer %s."
msgstr ""

#, python-format
msgid "No previous job in database for printer %s."
msgstr ""

#, python-format
msgid "Inconsistent values for printer %s's internal page counter."
msgstr ""

msgid ""
"Internal SNMP accounting asked, but Python-SNMP is not available. Please "
"download it from http://pysnmp.sourceforge.net"
msgstr ""

#, python-format
msgid "Unknown printer address in HARDWARE(%s) for printer %s"
msgstr "ไม่พบที่อยู่ของเครื่องพิมพ์ในอุปกรณ์ (%s) สำหรับเครื่องพิมพ์ %s"

#, python-format
msgid "Launching HARDWARE(%s)..."
msgstr "เริ่มการทำงานของอุปกรณ์ (%s)..."

#, python-format
msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
msgstr "สัญญาณ SIGTERM ถูกส่งไปยังอุปกรณ์ระบบบัญชีสมาชิก %s (pid: %s)"

#, python-format
msgid "Line [%s] skipped in accounter's output. Trying again..."
msgstr ""

#, python-format
msgid "Hardware accounter %s exit code is %s"
msgstr ""

#, python-format
msgid "Unable to query printer %s via HARDWARE(%s)"
msgstr "ไม่สามารค้นหาเครื่องพิมพ์ %s โดยผ่านอุปกรณ์(%s)"

#, python-format
msgid ""
"SNMP querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid ""
"PJL querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid "Launching SOFTWARE(%s)..."
msgstr "เริ่มการทำงานของซอฟต์แวร์(%s)..."

#, python-format
msgid "Unable to compute job size with accounter %s"
msgstr "ไม่สามารถคำนวณขนาดงานได้ด้วยระบบสมาชิก %s"

#, python-format
msgid "Problem while waiting for software accounter pid %s to exit : %s"
msgstr "เกิดปัญหาจากการคอยซอฟต์แวร์ระบบสมาชิก pid %s เพื่อออก : %s"

#, python-format
msgid "Software accounter %s exit code is %s"
msgstr "ซอฟต์แวร์ระบบสมาชิก %s ที่สั่งการออกคือ %s"

msgid "PyKota Reports"
msgstr "รายงาน PyKota"

msgid "Report"
msgstr "รายงาน"

msgid "User / Group names mask"
msgstr "ซ่อน ชื่อผู้ใช้/ชื่อกลุ่มผู้ใช้"

msgid "Groups report"
msgstr "รายงานกลุ่ม"

msgid "History"
msgstr "ประวัติ"

msgid "Empty"
msgstr "ล้าง"

msgid "Date"
msgstr "วันที่"

msgid "Action"
msgstr "กิจกรรม"

msgid "User"
msgstr "ผู้ใช้"

msgid "Printer"
msgstr "เครื่องพิมพ์"

msgid "Hostname"
msgstr "ชื่อเครื่อง"

msgid "JobId"
msgstr "หมายเลขงาน"

msgid "JobSize"
msgstr "ขนาดงาน"

msgid "JobPrice"
msgstr "ราคางาน"

msgid "Copies"
msgstr "จำนวนสำเนา"

msgid "JobBytes"
msgstr "ข้อมูลขนาดงาน"

msgid "PageCounter"
msgstr "จำนวนหน้า"

msgid "Title"
msgstr "ชื่อเรื่อง"

msgid "Filename"
msgstr "ชื่อแฟ้มข้อมูล"

msgid "Options"
msgstr "ตัวเลือก"

msgid "Previous page"
msgstr "หน้าที่แล้ว"

msgid "Please click on the above button"
msgstr ""