Index: pykota/trunk/setup.py
===================================================================
--- pykota/trunk/setup.py (revision 3344)
+++ pykota/trunk/setup.py (revision 3345)
@@ -153,5 +153,5 @@
                  ],
       scripts = [ "bin/pknotify", "bin/pkusers", "bin/pkinvoice", "bin/pksetup", \
-                  "bin/pkrefund", "bin/pkturnkey", "bin/pkbcodes", "bin/pkmail", \
+                  "bin/pkrefund", "bin/pkturnkey", "bin/pkbcodes", \
                   "bin/pkbanner", "bin/autopykota", "bin/dumpykota", \
                   "bin/pykosd", "bin/edpykota", "bin/repykota", \
Index: pykota/trunk/docs/introduction.sgml
===================================================================
--- pykota/trunk/docs/introduction.sgml (revision 3116)
+++ pykota/trunk/docs/introduction.sgml (revision 3345)
@@ -207,12 +207,4 @@
               <listitem>
                 <para>
-                  <command>pkmail</command> : to let users obtain their print quota situation by email.
-                  In the future other functionnalities will be added.
-                  This command is not meant to be used from the command line, but
-                  instead as a pipe from your mail server's <filename>/etc/aliases</filename> file.
-                </para>
-              </listitem>  
-              <listitem>
-                <para>
                   <command>pknotify</command> : a client for the <application>PyKotIcon</application> cross-platform generic network dialog box manager. This
                   tools allow you to interact with end users at printing time.
Index: pykota/trunk/docs/pykota.sgml
===================================================================
--- pykota/trunk/docs/pykota.sgml (revision 3275)
+++ pykota/trunk/docs/pykota.sgml (revision 3345)
@@ -16,5 +16,4 @@
   <!entity PKBCODES system "pkbcodes.sgml">
   <!entity PKBANNER system "pkbanner.sgml">
-  <!entity PKMAIL system "pkmail.sgml">
   <!entity PKUSERS system "pkusers.sgml">
   <!entity PKNOTIFY system "pknotify.sgml">
@@ -153,6 +152,4 @@
   &PKNOTIFY;
   
-  &PKMAIL;
-  
   &SCRIPTS;
     
Index: pykota/trunk/docs/pkmail.sgml
===================================================================
--- pykota/trunk/docs/pkmail.sgml (revision 2551)
+++  (revision )
@@ -1,101 +1,0 @@
-<!-- $Id$ -->
-
-<chapter>
-  <title>Control PyKota by email with pkmail</title>
-  <para>Last modified on $Date$</para>
-  
-  <para>
-    <command>pkmail</command> is an email gateway which allows you to control
-    <application>PyKota</application> using email messages.
-  </para>  
-  
-  <para>
-    For now, this command can't do more than print quota reports, but more
-    powerful functionnalities are planned for a future release.
-  </para>
-  
-  <sect1>
-    <title>Installation</title>
-    <para>
-      Contrary to other commands included with <application>PyKota</application>,
-      <command>pkmail</command> is not meant to be used from the command line,
-      but instead launched from your mail server when particular messages are
-      received.
-    </para>
-    
-    <para>
-      In order to achieve this, the easiest way is to define a special
-      email alias. Every message received on this address will cause your webserver to automatically
-      launch <command>pkmail</command>, passing the message's content on <command>pkmail</command>'s standard input.
-    </para>
-    
-    <para>
-      The name of the email alias is completely free, let's call it <literal>pykotacmd</literal> for example.
-      Now edit <filename>/etc/aliases</filename> with your favorite text editor and enter the following :
-<screen>      
-pykotacmd :     "|/usr/bin/pkmail"
-</screen>
-    </para>
-    
-    <para>
-      Finally, tell your mail server that new aliases are available. To do so, at the command prompt just
-      type :
-<screen>      
-$ newaliases
-</screen>      
-    </para>
-    
-    <para>
-      But to be useful, <command>pkmail</command> must be able to read <application>PyKota</application>'s
-      <filename>pykotadmin.conf</filename> configuration file. A simple way to do so is to put the system
-      user your mail server runs aliases commands as into the <literal>pykota</literal> system group, then
-      restart your mail server software.
-      <tip>
-        <title>Tip</title>
-        <para>
-          Depending on the software you use as the mail server, additional work may be needed. For example
-          <application>Exim</application> doesn't by default initialize all the groups when launching a
-          command from the <filename>/etc/aliases</filename> database. Please refer to your mail server's
-          documentation for details.
-        </para>
-      </tip>  
-    </para>
-  </sect1>  
-  
-  <sect1>
-    <title>Usage</title>
-    <para>
-      Now that <command>pkmail</command> is installed, we can use it by sending email messages to the address
-      <literal>pykotacmd@yourmailserver.example.com</literal>. This command will then process your request,
-      and send the result back to you by email.
-    </para>
-    
-    <para>
-      For now, <command>pkmail</command> only accepts commands in the <literal>Subject:</literal> field
-      of the email message you send to it.
-    </para>
-    
-    <para>
-      <command>pkmail</command> is still in a pretty experimental state, and only recognizes a single command :
-      <command>report</command>
-    </para>
-    
-    <para>
-      The <command>report</command> takes an username as its only optional argument. So for example to
-      receive a print quota report for user <literal>jerome</literal>, you'll just have to send
-      an email message with <literal>report jerome</literal> in the subject.
-    </para>
-  </sect1>  
-  
-  <sect1>
-    <title>Reference</title>
-    <para>
-      <cmdsynopsis>
-        <command>pkmail</command>
-        <group choice="opt"><arg>-v</arg><arg>--version</arg></group>
-        <group choice="opt"><arg>-h</arg><arg>--help</arg></group>
-      </cmdsynopsis>
-    </para>
-  </sect1>
-</chapter>
-
Index: pykota/trunk/bin/pkmail
===================================================================
--- pykota/trunk/bin/pkmail (revision 3295)
+++  (revision )
@@ -1,188 +1,0 @@
-#! /usr/bin/env python
-# -*- coding: UTF-8 -*-
-#
-# PyKota : Print Quotas for CUPS
-#
-# (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-# $Id$
-#
-#
-
-import sys
-import os
-import popen2
-import smtplib
-import email
-from email.MIMEText import MIMEText
-from email.Header import Header
-import email.Utils
-
-import pykota.appinit
-from pykota.utils import *
-
-from pykota.errors import PyKotaCommandLineError
-from pykota.tool import PyKotaTool
-    
-__doc__ = N_("""pkmail v%(__version__)s (c) %(__years__)s %(__author__)s
-
-Email gateway for PyKota.
-
-command line usage :
-
-  pkmail  [options]
-
-options :
-
-  -v | --version       Prints pkmail's version number then exits.
-  -h | --help          Prints this message then exits.
-  
-    
-  This command is meant to be used from your mail server's aliases file,
-  as a pipe. It will then accept commands send to it in email messages,
-  and will send the answer to the command's originator.
-  
-  To use this command, create an email alias in /etc/aliases with
-  the following format :
-  
-    pykotacmd: "|/usr/bin/pkmail"
-    
-  Then run the 'newaliases' command to regenerate the aliases database.
-  
-  You can now send commands by email to 'pykotacmd@yourdomain.com', with
-  the command in the subject.
-  
-  List of supported commands :
-  
-        report [username]
-  
-  NB : For pkmail to work correctly, you may have to put the 'mail'
-  system user in the 'pykota' system group to ensure this user can
-  read the /etc/pykota/pykotadmin.conf file, and restart your
-  mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-  that you think at least twice before doing this though.
-  
-  Use at your own risk !
-""")
-        
-        
-class PKMail(PyKotaTool) :        
-    """A class for pkmail."""
-    def main(self, files, options) :
-        """Accepts commands passed in an email message."""
-        data = sys.stdin.read()
-        message = email.message_from_string(data)
-        useremail = message["From"]
-        whoami = message["To"]
-        cmdargs = message["Subject"].split()
-        try :
-            (command, arguments) = (cmdargs[0].capitalize(), cmdargs[1:])
-        except IndexError :    
-            raise PyKotaCommandLineError, "No command found !"
-        
-        badchars = """/<>&"'#!%*$,;\\"""
-        cheatmeonce = 0
-        for c in "".join(arguments) :
-            if c in badchars :
-                cheatmeonce = 1
-            
-        if cheatmeonce :    
-            self.printInfo("Possible intruder at %s : %s" % (useremail, str(arguments)), "warn")
-            result = "Either you mistyped your command, or you're a bad guy !"
-        else :
-            self.logdebug("Launching internal command '%s' with arguments %s" % (command, str(arguments)))
-            cmdfunc = getattr(self, "cmd%s" % command, self.cmdDefault)
-            result = cmdfunc(arguments)
-        
-        self.logdebug("Sending answer to : %s" % useremail)
-        emailmsg = MIMEText(result, _charset=self.charset)
-        emailmsg["Subject"] = Header(_("Result of your commands"), charset=self.charset)
-        emailmsg["From"] = whoami
-        emailmsg["To"] = useremail
-        emailmsg["Date"] = email.Utils.formatdate(localtime=True)
-        server = smtplib.SMTP(self.smtpserver)
-        server.sendmail(whoami, [ useremail ], emailmsg.as_string())
-        server.quit()
-        self.logdebug("Answer sent to : %s" % useremail)
-        
-        return 0
-        
-    def runCommand(self, cmd) :    
-        """Executes a command."""
-        self.logdebug("Launching : '%s'" % cmd)
-        os.environ["PATH"] = "%s:/bin:/usr/bin:/usr/local/bin:/opt/bin:/sbin:/usr/sbin" % os.environ.get("PATH", "")
-        child = popen2.Popen3(cmd)
-        child.tochild.close()
-        result = child.fromchild.read()
-        status = child.wait()
-        if os.WIFEXITED(status) :
-            status = os.WEXITSTATUS(status)
-        self.logdebug("'%s' exited with status %s" % (cmd, status))
-        return result
-        
-    def cmdDefault(self, arguments) :    
-        """Default command : sends an 'unknown command' message."""
-        return "Unknown command."
-        
-    def cmdReport(self, args) :    
-        """Generates a print quota report."""
-        return self.runCommand("repykota %s" % ' '.join([ '"%s"' % a for a in args ]))
-            
-if __name__ == "__main__" : 
-    retcode = 0
-    try :
-        defaults = { \
-                   }
-        short_options = "vh"
-        long_options = ["help", "version"]
-        
-        # Initializes the command line tool
-        mailparser = PKMail(doc=__doc__)
-        mailparser.deferredInit()
-        
-        # parse and checks the command line
-        (options, args) = mailparser.parseCommandline(sys.argv[1:], short_options, long_options, allownothing=1)
-        
-        # sets long options
-        options["help"] = options["h"] or options["help"]
-        options["version"] = options["v"] or options["version"]
-        
-        if options["help"] :
-            mailparser.display_usage_and_quit()
-        elif options["version"] :
-            mailparser.display_version_and_quit()
-        else :
-            retcode = mailparser.main(args, options)
-    except KeyboardInterrupt :        
-        logerr("\nInterrupted with Ctrl+C !\n")
-        retcode = -3
-    except PyKotaCommandLineError, msg :    
-        logerr("%s : %s\n" % (sys.argv[0], msg))
-        retcode = -2
-    except SystemExit :        
-        pass
-    except :
-        try :
-            mailparser.crashed("pkmail failed")
-        except :    
-            crashed("pkmail failed")
-        retcode = -1
-
-    try :
-        mailparser.storage.close()
-    except (TypeError, NameError, AttributeError) :    
-        pass
-        
-    sys.exit(retcode)    
Index: pykota/trunk/MANIFEST.in
===================================================================
--- pykota/trunk/MANIFEST.in (revision 3240)
+++ pykota/trunk/MANIFEST.in (revision 3345)
@@ -1,4 +1,4 @@
 include README FAQ COPYING LICENSE TODO ChangeLog AUTHORS CREDITS SECURITY MANIFEST.in 
-include clean.sh gentarball.sh checkdeps.py bin/pkturnkey bin/pkmail bin/pkbanner
+include clean.sh gentarball.sh checkdeps.py bin/pkturnkey bin/pkbanner
 include bin/autopykota bin/dumpykota bin/cupspykota bin/edpykota bin/warnpykota
 include bin/repykota bin/pykotme bin/pykosd bin/pkprinters bin/pkbcodes bin/pkinvoice
Index: pykota/trunk/man/sv_SE/pkmail.1
===================================================================
--- pykota/trunk/man/sv_SE/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/de/pkmail.1
===================================================================
--- pykota/trunk/man/de/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/nb_NO/pkmail.1
===================================================================
--- pykota/trunk/man/nb_NO/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/pt_BR/pkmail.1
===================================================================
--- pykota/trunk/man/pt_BR/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/fr/pkmail.1
===================================================================
--- pykota/trunk/man/fr/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,65 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Passerelle courrier �ctronique pour PyKota.
-.PP
-ligne de commande :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Affiche la version de pkmail et quitte.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Affiche ce message et quitte.
-.IP
-Cette commande est faite pour �e utilis�depuis la base de donn�
-d'alias de votre serveur de courrier �ctronique, en tant que pipe.
-Elle va accepter les commandes qui lui sont envoy� dans des messages
-et renverra sa r�nse �'exp�teur de la demande.
-.IP
-Pour utiliser cette commande, cr� un alias email dans /etc/aliases
-avec le format suivant :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Puis lancez la commande 'newaliases' pour r�n�r la base de donn�
-d'alias.
-.IP
-Vous pouvez maintenant envoyer vos demandes par email �'adresse
-\&'pykotacmd@yourdomain.com', avec la commande dans le champ sujet.
-.IP
-Liste des commandes support� :
-.IP
-report [utilisateur]
-.IP
-NB : Pour que pkmail fonctionne correctement, il se peut que vous ayez �ettre l'utilisateur 'mail' dans le groupe syst� 'pykota' afin d'assurer
-que cet utilisateur puisse lire le fichier /etc/pykota/pykotadmin.conf,
-et de relancer votre serveur de courrier �ctronique (par exemple
-/etc/init.d/exim restart). Cependant, il est fortement conseill�ue vous
-r��issiez plut�eux fois qu'une avant de faire ceci.
-.IP
-Utilisez �os risques et p�ls !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Merci d'envoyer les rapports de bugs � Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/th/pkmail.1
===================================================================
--- pykota/trunk/man/th/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/pl/pkmail.1
===================================================================
--- pykota/trunk/man/pl/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/pt/pkmail.1
===================================================================
--- pykota/trunk/man/pt/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/tr/pkmail.1
===================================================================
--- pykota/trunk/man/tr/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/el_GR/pkmail.1
===================================================================
--- pykota/trunk/man/el_GR/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/zh_TW/pkmail.1
===================================================================
--- pykota/trunk/man/zh_TW/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/es/pkmail.1
===================================================================
--- pykota/trunk/man/es/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/it/pkmail.1
===================================================================
--- pykota/trunk/man/it/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "janvier 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NOM
-pkmail \- page de manuel de pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
Index: pykota/trunk/man/pkmail.1
===================================================================
--- pykota/trunk/man/pkmail.1 (revision 3279)
+++  (revision )
@@ -1,63 +1,0 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-.TH PKMAIL "1" "January 2008" "C@LL - Conseil Internet & Logiciels Libres" "User Commands"
-.SH NAME
-pkmail \- manual page for pkmail 1.27alpha3_BROKEN_unofficial
-.SH DESCRIPTION
-pkmail v1.27alpha3_BROKEN_unofficial (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet \- alet@librelogiciel.com
-.PP
-Email gateway for PyKota.
-.PP
-command line usage :
-.TP
-pkmail
-[options]
-.PP
-options :
-.TP
-\fB\-v\fR | \fB\-\-version\fR
-Prints pkmail's version number then exits.
-.TP
-\fB\-h\fR | \fB\-\-help\fR
-Prints this message then exits.
-.IP
-This command is meant to be used from your mail server's aliases file,
-as a pipe. It will then accept commands send to it in email messages,
-and will send the answer to the command's originator.
-.IP
-To use this command, create an email alias in /etc/aliases with
-the following format :
-.IP
-pykotacmd: "|/usr/bin/pkmail"
-.IP
-Then run the 'newaliases' command to regenerate the aliases database.
-.IP
-You can now send commands by email to 'pykotacmd@yourdomain.com', with
-the command in the subject.
-.IP
-List of supported commands :
-.IP
-report [username]
-.IP
-NB : For pkmail to work correctly, you may have to put the 'mail'
-system user in the 'pykota' system group to ensure this user can
-read the /etc/pykota/pykotadmin.conf file, and restart your
-mail server (e.g. /etc/init.d/exim restart). It is strongly advised
-that you think at least twice before doing this though.
-.IP
-Use at your own risk !
-.PP
-(c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-.PP
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-.PP
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-.PP
-Please report bugs to : Jerome Alet \- alet@librelogiciel.com
