Index: pykota/trunk/po/th/pykota.po
===================================================================
--- pykota/trunk/po/th/pykota.po (revision 1653)
+++ pykota/trunk/po/th/pykota.po (revision 1798)
@@ -28,5 +28,5 @@
 "Project-Id-Version: PyKota v1.19\n"
 "Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
-"POT-Creation-Date: 2004-07-21 15:35:00+0100\n"
+"POT-Creation-Date: 2004-10-11 14:49+0200\n"
 "PO-Revision-Date: 2004-07-21 15:35:00+0100\n"
 "Last-Translator: Suthep Yonpimai <tomzt@hotmail.com>\n"
@@ -37,4 +37,913 @@
 
 #, python-format
+msgid ""
+"autopykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"A tool to automate user account creation and initial balance setting.\n"
+"\n"
+"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
+"  OF AN external policy IN pykota.conf\n"
+"  \n"
+"  autopykota { -i | --initbalance value } \n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints edpykota's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
+"                       If the user already exists, actual balance is left\n"
+"                       unmodified. If unset, the default value is 0.\n"
+"                       \n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
+msgid ""
+"edpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"A Print Quota editor for PyKota.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  edpykota [options] user1 user2 ... userN\n"
+"  \n"
+"  edpykota [options] group1 group2 ... groupN\n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints edpykota's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -a | --add           Adds users and/or printers if they don't \n"
+"                       exist on the Quota Storage Server.\n"
+"                       \n"
+"  -d | --delete        Deletes users/groups from the quota storage.\n"
+"                       Printers are never deleted.\n"
+"                       \n"
+"  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
+"                       for a particular printer. Job price is optional.\n"
+"                       If both are to be set, separate them with a comma.\n"
+"                       Floating point values are allowed.\n"
+"  \n"
+"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
+"                              listed, separated by commas. The groups\n"
+"                              must already exist in the Quota Storage.\n"
+"  \n"
+"  -u | --users         Edit users print quotas, this is the default.\n"
+"  \n"
+"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
+"                       use wildcards characters to select only\n"
+"                       some printers. The default value is *, meaning\n"
+"                       all printers. \n"
+"                       You can specify several names or wildcards, \n"
+"                       by separating them with commas.\n"
+"  \n"
+"  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
+"                       pg1, pg2, etc... which must already exist.\n"
+"                       A printer group is just like a normal printer,\n"
+"                       only that it is usually unknown from the printing\n"
+"                       system. Create printer groups exactly the same\n"
+"                       way that you create printers, then add other \n"
+"                       printers to them with this option.\n"
+"                       Accounting is done on a printer and on all\n"
+"                       the printer groups it belongs to, quota checking\n"
+"                       is done on a printer and on all the printer groups\n"
+"                       it belongs to.\n"
+"  \n"
+"  -g | --groups        Edit users groups print quotas instead of users.\n"
+"                          \n"
+"  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
+"                       print quotas\n"
+"                       \n"
+"  -n | --noquota       Doesn't set a quota but only does accounting.\n"
+"  \n"
+"  -r | --reset         Resets the actual page counter for the user\n"
+"                       or group to zero on the specified printers. \n"
+"                       The life time page counter is kept unchanged.\n"
+"                       \n"
+"  -R | --hardreset     Resets the actual and life time page counters\n"
+"                       for the user or group to zero on the specified \n"
+"                       printers. \n"
+"                       \n"
+"  -l | --limitby l     Choose if the user/group is limited in "
+"printing                     \n"
+"                       by its account balance or by its page quota.\n"
+"                       The default value is 'quota'. Allowed values\n"
+"                       are 'quota' 'balance' 'quota-then-balance' and\n"
+"                       'balance-then-quota'.\n"
+"                       WARNING : quota-then-balance and balance-then-quota\n"
+"                       are not yet implemented.\n"
+"                       \n"
+"  -b | --balance b     Sets the user's account balance to "
+"b.                     \n"
+"                       Account balance may be increase or decreased\n"
+"                       if b is prefixed with + or -.\n"
+"                       WARNING : when decreasing account balance,\n"
+"                       the total paid so far by the user is decreased\n"
+"                       too.\n"
+"                       Groups don't have a real balance, but the\n"
+"                       sum of their users' account balance.\n"
+"                       \n"
+"  -S | --softlimit sl  Sets the quota soft limit to sl "
+"pages.                       \n"
+"  \n"
+"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
+"  \n"
+"  user1 through userN and group1 through groupN can use wildcards\n"
+"  if the --add option is not set.\n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
+"  \n"
+"  This will add users john, paul, george and ringo to the quota\n"
+"  database, and set their print quotas to the same values than user \n"
+"  jerome. User jerome must already exist.\n"
+"  User ringo's email address will also be set to 'ringo@example.com'\n"
+"  \n"
+"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
+"  \n"
+"  This will set jerome's print quota on the lp printer to a soft limit\n"
+"  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
+"  printer lp doesn't exist on the Quota Storage Server then nothing is "
+"done.\n"
+"\n"
+"  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
+"  \n"
+"  Same as above, but if either user jerome or printer lp doesn't exist \n"
+"  on the Quota Storage Server they are automatically added. Also\n"
+"  user jerome is put into the groups \"coders\" and \"it\" which must\n"
+"  already exist in the Quota Storage.\n"
+"            \n"
+"  $ edpykota -g -S 500 -H 550 financial support            \n"
+"  \n"
+"  This will set print quota soft limit to 500 pages and hard limit\n"
+"  to 550 pages for groups financial and support on all printers.\n"
+"  \n"
+"  $ edpykota --reset jerome \"jo*\"\n"
+"  \n"
+"  This will reset jerome's page counter to zero on all printers, as\n"
+"  well as every user whose name begins with 'jo'.\n"
+"  Their life time page counter on each printer will be kept unchanged.\n"
+"  You can also reset the life time page counters by using the\n"
+"  --hardreset | -R command line option.\n"
+"  \n"
+"  $ edpykota --printer hpcolor --noquota jerome\n"
+"  \n"
+"  This will tell PyKota to not limit jerome when printing on the \n"
+"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
+"  accounting of the pages he prints will still be kept.\n"
+"  Print Quotas for jerome on other printers are unchanged.\n"
+"  \n"
+"  $ edpykota --limitby balance jerome\n"
+"  \n"
+"  This will tell PyKota to limit jerome by his account's balance\n"
+"  when printing.\n"
+"  \n"
+"  $ edpykota --balance +10.0 jerome\n"
+"  \n"
+"  This will increase jerome's account balance by 10.0 (in your\n"
+"  own currency). You can decrease the account balance with a\n"
+"  dash prefix, and set it to a fixed amount with no prefix.\n"
+"  \n"
+"  $ edpykota --delete jerome rachel\n"
+"  \n"
+"  This will completely delete jerome and rachel from the Quota Storage\n"
+"  database. All their quotas and jobs will be deleted too.\n"
+"  \n"
+"  $ edpykota --printer lp --charge 0.1\n"
+"  \n"
+"  This will set the page price for printer lp to 0.1. Job price\n"
+"  will not be changed.\n"
+"  \n"
+"  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
+"  \n"
+"  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
+"  When printing either on hplj1 or hplj2, print quota will also be \n"
+"  checked and accounted for on virtual printers Laser and HP.\n"
+"\n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+msgid "You're not allowed to use this command."
+msgstr ""
+
+#, python-format
+msgid "Invalid softlimit value %s."
+msgstr "��%s �ͧ softlimit ��١��"
+
+#, python-format
+msgid "Invalid hardlimit value %s."
+msgstr "��%s �ͧ hardlimit��١�� "
+
+#, python-format
+msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
+msgstr "��Hard limit %i �������soft limit %i ������"
+
+#, python-format
+msgid "Invalid balance value %s"
+msgstr "����������١�� %s"
+
+#, python-format
+msgid "Invalid charge amount value %s"
+msgstr "����������١�� %s"
+
+#, python-format
+msgid "Invalid limitby value %s"
+msgstr "����ӡѴ %s ��١��"
+
+#, python-format
+msgid "Impossible to add printer %s"
+msgstr "���ö�ӡ�����������
+#, python-format
+msgid "Invalid printer name %s"
+msgstr "����������s ��١��"
+
+#, python-format
+msgid "There's no printer matching %s"
+msgstr "�����ͧ����s ����ҹ�"
+
+msgid "You have to pass user or group names on the command line"
+msgstr "�س���������� �����������������
+#, python-format
+msgid "Prototype %s not found in Quota Storage for printer %s."
+msgstr "������� %s �����������Ѻ��ͧ����s "
+
+#, python-format
+msgid "Prototype object %s not found in Quota Storage."
+msgstr "������ص��� %s ���������"
+
+#, python-format
+msgid "Undefined hard limit set to soft limit (%s) on printer %s."
+msgstr "���ӡ������hard limit �֧ soft limit (%s) ����ͧ����s"
+
+#, python-format
+msgid "Undefined soft limit set to hard limit (%s) on printer %s."
+msgstr "���ӡ������soft limit �֧ hard limit (%s) ����ͧ����s"
+
+#, python-format
+msgid "Invalid email address %s"
+msgstr "email address %s ��١��"
+
+#, python-format
+msgid "Invalid group name %s"
+msgstr "��͡���� %s ��١��"
+
+#, python-format
+msgid "Invalid user name %s"
+msgstr "��ͼ�� %s ��١��"
+
+#, python-format
+msgid "Quota not found for object %s on printer %s."
+msgstr "��������������Ѻ %s ����ͧ����s"
+
+#, python-format
+msgid "Group %s not found in the PyKota Storage."
+msgstr "�������� %s ��������ͧ PyKota"
+
+msgid "incompatible options, see help."
+msgstr "���͡����, ���Ҵ٨ҡ�ǹ����"
+
+#, python-format
+msgid ""
+"pykosd v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"An OSD quota monitor for PyKota.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  pykosd [options]\n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints pkprinters's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
+"                       triplet, for example #FF0000 is 100%% red.\n"
+"                       Defaults to 100%% green (#00FF00).\n"
+"                       \n"
+"  -d | --duration d    Sets the duration of the display in seconds. \n"
+"                       Defaults to 3 seconds.\n"
+"                       \n"
+"  -f | --font f        Sets the font to use for "
+"display.                      \n"
+"                       Defaults to the Python OSD library's default.\n"
+"  \n"
+"  -l | --loop n        Sets the number of times the info will be displayed.\n"
+"                       Defaults to 0, which means loop forever.\n"
+"                       \n"
+"  -s | --sleep s       Sets the sleeping duration between two displays \n"
+"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
+"                       \n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ pykosd -s 60 --loop 5\n"
+"  \n"
+"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
+"  and will last for 3 seconds (the default) each time. After five\n"
+"  iterations, the program will exit.\n"
+"  \n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
+msgid "Invalid duration option %s"
+msgstr "������������١��"
+
+#, python-format
+msgid "Invalid loop option %s"
+msgstr "�ҵ������ӫ���١��"
+
+#, python-format
+msgid "Invalid sleep option %s"
+msgstr "���������ѡ��ͧ��١��"
+
+#, python-format
+msgid "Invalid color option %s"
+msgstr "����������١��"
+
+#, python-format
+msgid "User %s doesn't exist in PyKota's database"
+msgstr "����ͼ�� %s 㹰ҹ����ͧ PyKota"
+
+#, python-format
+msgid "Pages used on %s : %s"
+msgstr "�ӹǹ˹���仺� %s : %s"
+
+#, python-format
+msgid "PyKota Units left : %.2f"
+msgstr "˹������ͧ PyKota : %.2f"
+
+#, python-format
+msgid ""
+"warnpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"\n"
+"Sends mail to users over print quota.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  warnpykota  [options]  [names]\n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints warnpykota's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -u | --users         Warns users over their print quota, this is the \n"
+"                       default.\n"
+"  \n"
+"  -g | --groups        Warns users whose groups quota are over limit.\n"
+"  \n"
+"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
+"                       use wildcards characters to select only\n"
+"                       some printers. The default value is *, meaning\n"
+"                       all printers.\n"
+"                       You can specify several names or wildcards, \n"
+"                       by separating them with commas.\n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ warnpykota --printer lp\n"
+"  \n"
+"  This will warn all users of the lp printer who have exceeded their\n"
+"  print quota.\n"
+"\n"
+"  $ warnpykota \n"
+"  \n"
+"  This will warn all users  who have exceeded their print quota on\n"
+"  any printer.\n"
+"\n"
+"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
+"  \n"
+"  This will warn all users of groups which names begins with \"dev\" and\n"
+"  who have exceeded their print quota on any printer which name begins \n"
+"  with \"laserjet\"\n"
+"  \n"
+"  If launched by an user who is not a PyKota administrator, additionnal\n"
+"  arguments representing users or groups names are ignored, and only the\n"
+"  current user/group is reported.\n"
+"\n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+msgid "Job contains no data. Printing is denied."
+msgstr "������㹧ҹ ���ʸ������
+
+msgid "Job accounting begins."
+msgstr "����ӧҹ�ͧ�Ҫԡ"
+
+msgid "Job accounting ends."
+msgstr "�����ӧҹ�ͧ�Ҫԡ"
+
+msgid "Job size forced to 0 because printing is denied."
+msgstr "��Ҵ�ͧ�ҹ�١��¹�� 0 �����ʸ������
+#, python-format
+msgid "Job size : %i"
+msgstr "��Ҵ�ҹ : %i"
+
+#, python-format
+msgid "Updating user %s's quota on printer %s"
+msgstr "��ѧ���������ͧ��� %s ����ͧ����s"
+
+msgid "Job added to history."
+msgstr "���ҹ��������
+
+#, python-format
+msgid "File number %s unregistered twice from polling object, ignored."
+msgstr "������� %s ������ŧ����� 2 ��駨ҡ������� ,���
+
+#, python-format
+msgid "SIGTERM was sent to real backend %s (pid: %s)"
+msgstr "���ҳ SIGTERM �١���ѧ��ͧ�� %s (pid: %s)"
+
+#, python-format
+msgid "CUPS backend %s died abnormally."
+msgstr "CUPS �ͧ��ͧ�� %s ����ش�ӧҹẺ�Դ�á��
+
+#, python-format
+msgid ""
+"dumpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"\n"
+"Dumps PyKota database's content.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  dumpykota [options] \n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints dumpykota's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
+"                       \n"
+"                         - history : dumps the jobs history.\n"
+"                         - users : dumps users.\n"
+"                         - groups : dumps user groups.\n"
+"                         - printers : dump printers.\n"
+"                         - upquotas : dump user quotas.\n"
+"                         - gpquotas : dump user groups quotas.\n"
+"                         - payments : dumps user payments.\n"
+"                         - pmembers : dumps printer groups members.\n"
+"                         - umembers : dumps user groups members.\n"
+"                         \n"
+"                       NB : the -d | --data command line option   \n"
+"                       is MANDATORY.\n"
+"  \n"
+"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
+"                       the format is to dump datas in the csv format (comma\n"
+"                       separated values). All data dumped is between double\n"
+"                       quotes. Allowed formats are :\n"
+"                       \n"
+"                         - csv : separate datas with commas\n"
+"                         - ssv : separate datas with semicolons\n"
+"                         - tsv : separate datas with tabs\n"
+"                         - xml : dump data as XML\n"
+"                         \n"
+"  -o | --output fname  All datas will be dumped to the file instead of\n"
+"                       to the standard output. The special '-' filename\n"
+"                       is the default value and means stdout.\n"
+"                       WARNING : existing files are truncated !\n"
+"  \n"
+"Examples :\n"
+"\n"
+"  $ dumpykota --data history --format csv >myfile.csv\n"
+"  \n"
+"  This dumps the history in a comma separated values file, for possible\n"
+"  use in a spreadsheet.\n"
+"  \n"
+"  $ dumpykota --data users --format xml -o users.xml\n"
+"  \n"
+"  Dumps all users datas to the users.xml file.\n"
+"  \n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
+msgid "Invalid modifier [%s] for --data command line option, see help."
+msgstr ""
+
+#, python-format
+msgid "Invalid modifier [%s] for --format command line option, see help."
+msgstr ""
+
+msgid "XML output is disabled because the jaxml module is not available."
+msgstr ""
+
+msgid "PyKota data dumper failed : I/O error"
+msgstr ""
+
+msgid "The -d | --data command line option is mandatory, see help."
+msgstr ""
+
+msgid "Too many arguments, see help."
+msgstr ""
+
+msgid "Software accounting already done in first pass. Ignoring."
+msgstr "����Ϳ�������ѭ����ԡ����ǹ� ���
+
+msgid "Hardware accounting already done in first pass. Ignoring."
+msgstr "�����������ѭ����ԡ����ǹ� ���
+
+#, python-format
+msgid ""
+"pkhint v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"A tool to give hints on what accounting method is best for each printer.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints pkhint's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
+"  \n"
+"  Will analyze your printing system to test which accounter\n"
+"  is the best for each of the defined printer which\n"
+"  name matches one of the parameters.\n"
+"  \n"
+"  If you don't pass any argument on the command line, all\n"
+"  printers will be analyzed.\n"
+"  \n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
+msgid "Invalid DeviceURI : %s"
+msgstr "��DeviceURI : %s ��١��"
+
+msgid ""
+"\n"
+"Please wait while pkhint analyzes your printing system's configuration..."
+msgstr ""
+"\n"
+"�����pkhint �зӡ������������к����������..."
+
+#, python-format
+msgid "Unknown device %s for printer %s"
+msgstr "�������ó�s ��Ѻ��ͧ����s"
+
+msgid ""
+"\n"
+"Put the following lines into your /etc/pykota/pykota.conf file :\n"
+msgstr ""
+"\n"
+"��������Ѵ�����ŧ���/etc/pykota/pykota.conf file :\n"
+
+msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
+msgstr "# ����� : ��Ϳ�������Ҫԡ����й�
+
+msgid "# that hardware accounting wouldn't work, this only means that PyKota"
+msgstr "# ��������Ҫԡ���ö�ӧҹ�, �ѭ�������੾��Ѻ PyKota"
+
+msgid "# wasn't able to autodetect which hardware accounting method to use."
+msgstr "# ��������������Ҫԡ����ö��"
+
+#, python-format
+msgid ""
+"pkprinters v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"A Printers Manager for PyKota.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints pkprinters's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -a | --add           Adds printers if they don't exist on the Quota \n"
+"                       Storage Server. If they exist, they are modified\n"
+"                       unless -s|--skipexisting is also used.\n"
+"                       \n"
+"  -d | --delete        Deletes printers from the quota storage.\n"
+"  \n"
+"  -D | --description   Adds a textual description to printers.\n"
+"                       \n"
+"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
+"                       Job price is optional.\n"
+"                       If both are to be set, separate them with a comma.\n"
+"                       Floating point and negative values are allowed.\n"
+"  \n"
+"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
+"                       groups pg1, pg2, etc... which must already exist.\n"
+"                       A printer group is just like a normal printer,\n"
+"                       only that it is usually unknown from the printing\n"
+"                       system. Create printer groups exactly the same\n"
+"                       way that you create printers, then add other \n"
+"                       printers to them with this option.\n"
+"                       Accounting is done on a printer and on all\n"
+"                       the printer groups it belongs to, quota checking\n"
+"                       is done on a printer and on all the printer groups\n"
+"                       it belongs to.\n"
+"                       If the --remove option below is not used, the \n"
+"                       default action is to add printers to the specified\n"
+"                       printer groups.\n"
+"                       \n"
+"  -l | --list          List informations about the printer(s) and the\n"
+"                       printers groups it is a member of.\n"
+"                       \n"
+"  -r | --remove        In combination with the --groups option "
+"above,                       \n"
+"                       remove printers from the specified printers groups.\n"
+"                       \n"
+"  -s | --skipexisting  In combination with the --add option above, tells\n"
+"                       pkprinters to not modify existing printers.\n"
+"  \n"
+"  printer1 through printerN can contain wildcards if the --add option \n"
+"  is not set.\n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
+"hp8000\n"
+"  \n"
+"  Will create three printers named hp2100, hp2200 and hp8000.\n"
+"  Their price per page will be set at 0.05 unit, and their price\n"
+"  per job will be set at 0.1 unit. Units are in your own currency,\n"
+"  or whatever you want them to mean.\n"
+"  All of their descriptions will be set to the string \"HP Printer\".\n"
+"  If any of these printers already exists, it will also be modified \n"
+"  unless the -s|--skipexisting command line option is also used.\n"
+"            \n"
+"  $ pkprinters --delete \"*\"\n"
+"  \n"
+"  This will completely delete all printers and associated quota "
+"information,\n"
+"  as well as their job history. USE WITH CARE !\n"
+"  \n"
+"  $ pkprinters --groups Laser,HP \"hp*\"\n"
+"  \n"
+"  This will put all printers which name matches \"hp*\" into printers "
+"groups \n"
+"  Laser and HP, which MUST already exist.\n"
+"  \n"
+"  $ pkprinters --groups LexMark --remove hp2200\n"
+"  \n"
+"  This will remove the hp2200 printer from the LexMark printer group.\n"
+"  \n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
+msgid "Printer %s already exists, skipping."
+msgstr "��ͧ����s ��١�Դ����� ���
+
+#, python-format
+msgid "Printer %s already exists, will be modified."
+msgstr "��ͧ����s ��١�Դ����� �ӡ������"
+
+msgid "in"
+msgstr "�
+
+msgid "You have to pass printer groups names on the command line"
+msgstr "�س�����͡��������캹��������
+msgid "You have to pass printer names on the command line"
+msgstr "�س������������캹��������
+#, python-format
+msgid ""
+"pykotme v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"\n"
+"Gives print quotes to users.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  pykotme  [options]  [files]\n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints pykotme's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
+"                       use wildcards characters to select only\n"
+"                       some printers. The default value is *, meaning\n"
+"                       all printers.\n"
+"                       You can specify several names or wildcards, \n"
+"                       by separating them with commas.\n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ pykotme --printer apple file1.ps file2.ps\n"
+"  \n"
+"  This will give a print quote to the current user. The quote will show\n"
+"  the price and size of a job consisting in file1.ps and file2.ps \n"
+"  which would be sent to the apple printer.\n"
+"  \n"
+"  $ pykotme --printer apple,hplaser <file1.ps\n"
+"  \n"
+"  This will give a print quote to the current user. The quote will show\n"
+"  the price and size of a job consisting in file1.ps as read from\n"
+"  standard input, which would be sent to the apple or hplaser\n"
+"  printer.\n"
+"\n"
+"  $ pykotme \n"
+"  \n"
+"  This will give a quote for a job consisting of what is on standard \n"
+"  input. The quote will list the job size, and the price the job\n"
+"  would cost on each printer.\n"
+"\n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
+msgid "Your account balance : %.2f"
+msgstr "���������ͧ�س : %.2f"
+
+#, python-format
+msgid "Job size : %i pages"
+msgstr "�ӹǹ�ҹ : %i ˹�
+
+#, python-format
+msgid "Cost on printer %s : %.2f"
+msgstr "��ҡ��������ͧ����s : %.2f"
+
+#, python-format
+msgid ""
+"repykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
+"\n"
+"Generates print quota reports.\n"
+"\n"
+"command line usage :\n"
+"\n"
+"  repykota [options] \n"
+"\n"
+"options :\n"
+"\n"
+"  -v | --version       Prints repykota's version number then exits.\n"
+"  -h | --help          Prints this message then exits.\n"
+"  \n"
+"  -u | --users         Generates a report on users quota, this is \n"
+"                       the default.\n"
+"  \n"
+"  -g | --groups        Generates a report on group quota instead of users.\n"
+"  \n"
+"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
+"                       use wildcards characters to select only\n"
+"                       some printers. The default value is *, meaning\n"
+"                       all printers.\n"
+"                       You can specify several names or wildcards, \n"
+"                       by separating them with commas.\n"
+"  \n"
+"examples :                              \n"
+"\n"
+"  $ repykota --printer lp\n"
+"  \n"
+"  This will print the quota status for all users who use the lp printer.\n"
+"\n"
+"  $ repykota \n"
+"  \n"
+"  This will print the quota status for all users on all printers.\n"
+"  \n"
+"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
+"  \n"
+"  This will print the quota status for user jerome and all users\n"
+"  whose name begins with \"jo\" on all printers which name begins\n"
+"  with \"laser\" or ends with \"pson\".\n"
+"  \n"
+"  If launched by an user who is not a PyKota administrator, additionnal\n"
+"  arguments representing users or groups names are ignored, and only the\n"
+"  current user/group is reported.\n"
+"\n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"Please e-mail bugs to: %s"
+msgstr ""
+
+#, python-format
 msgid "Unsupported accounter backend %s"
 msgstr "����ѭ����ԡ�ʹѺʹع���ӧҹ %s"
@@ -67,4 +976,8 @@
 msgid "Option enforcement in section %s only supports values in %s"
 msgstr "���͡ enforcement ��� %s ʹѺʹع੾���� %s"
+
+#, python-format
+msgid "Option onaccountererror in section %s only supports values in %s"
+msgstr ""
 
 #, python-format
@@ -316,8 +1229,105 @@
 "��� %s ���������������캹��ͧ����s �к� PyKota ,�ҹ���觨ж١¡�� "
 
+#, python-format
+msgid ""
+"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
+"double check /etc/pykota/pykota.conf : %s"
+msgstr ""
+"�š����%s ���. ������������١�� �������� /etc/pykota/pykota.conf : %"
+"s �����
+
+#, python-format
+msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
+msgstr "�š����%s(%s) �ҡ %s(scope=%s) �� ����觷���"
+
+#, python-format
+msgid "Problem adding LDAP entry (%s, %s)"
+msgstr "���ѭ�㹡�������� LDAP (%s, %s)"
+
+#, python-format
+msgid "Problem deleting LDAP entry (%s)"
+msgstr "���ѭ�㹡�ź����ҡ LDAP (%s, %s)"
+
+#, python-format
+msgid "Problem modifying LDAP entry (%s, %s)"
+msgstr "���ѭ�㹡��㢢���LDAP (%s, %s)"
+
+#, python-format
+msgid ""
+"No pykotaAccountBalance object found for user %s. Did you create LDAP "
+"entries manually ?"
+msgstr ""
+
+#, python-format
+msgid ""
+"Unable to find an existing objectClass %s entry with %s=%s to attach "
+"pykotaAccount objectClass"
+msgstr ""
+"���ö�鹾��������%s ���Ҷ֧�� %s=%s �����Ѻ ����Ҫԡ Pykota "
+"�������
+
+#, python-format
+msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
+msgstr "���ö�鹾�������Ҷ֧�������Ѻ pykotaGroup �������%s"
+
 msgid "Totals may be inaccurate if some users are members of several groups."
 msgstr "�ӹǹ��Ҩ��١�� ������ҧ�����Ҫԡ�ͧ����¡��"
 
 #, python-format
+msgid "Network error while doing SNMP queries on printer %s : %s"
+msgstr ""
+
+#, python-format
+msgid "Problem encountered while doing SNMP queries on printer %s : %s"
+msgstr ""
+
+#, python-format
+msgid "Waiting for printer %s to be idle or printing..."
+msgstr ""
+
+#, python-format
+msgid "Waiting for printer %s's idle status to stabilize..."
+msgstr ""
+
+#, python-format
+msgid "Problem during connection to %s:%s : %s"
+msgstr ""
+
+#, python-format
+msgid "Problem while sending PJL query to %s:%s : %s"
+msgstr ""
+
+#, python-format
+msgid "A problem occured while reading printer %s's internal page counter."
+msgstr ""
+
+#, python-format
+msgid "Retrieving printer %s's page counter from database instead."
+msgstr ""
+
+#, python-format
+msgid ""
+"Couldn't retrieve printer %s's internal page counter either before or after "
+"printing."
+msgstr ""
+
+#, python-format
+msgid "Job's size forced to 1 page for printer %s."
+msgstr ""
+
+#, python-format
+msgid "No previous job in database for printer %s."
+msgstr ""
+
+#, python-format
+msgid "Inconsistent values for printer %s's internal page counter."
+msgstr ""
+
+msgid ""
+"Internal SNMP accounting asked, but Python-SNMP is not available. Please "
+"download it from http://pysnmp.sourceforge.net"
+msgstr ""
+
+#, python-format
 msgid "Unknown printer address in HARDWARE(%s) for printer %s"
 msgstr "��������ͧ��ͧ�������ó�%s) ��Ѻ��ͧ����s"
@@ -328,16 +1338,32 @@
 
 #, python-format
-msgid "Incorrect answer : %s"
-msgstr "�ӵͺ��١�� : %s"
-
-#, python-format
 msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
 msgstr "���ҳ SIGTERM �١���ѧ���ó����ѭ����ԡ %s (pid: %s)"
 
 #, python-format
+msgid "Line [%s] skipped in accounter's output. Trying again..."
+msgstr ""
+
+#, python-format
+msgid "Hardware accounter %s exit code is %s"
+msgstr ""
+
+#, python-format
 msgid "Unable to query printer %s via HARDWARE(%s)"
 msgstr "���ä���������s ������ó�s)"
 
 #, python-format
+msgid ""
+"SNMP querying stage interrupted. Using latest value seen for internal page "
+"counter (%s) on printer %s."
+msgstr ""
+
+#, python-format
+msgid ""
+"PJL querying stage interrupted. Using latest value seen for internal page "
+"counter (%s) on printer %s."
+msgstr ""
+
+#, python-format
 msgid "Launching SOFTWARE(%s)..."
 msgstr "����ӧҹ�ͧ�Ϳ���(%s)..."
@@ -354,40 +1380,4 @@
 msgid "Software accounter %s exit code is %s"
 msgstr "�Ϳ�������Ҫԡ %s ���觡����� %s"
-
-#, python-format
-msgid ""
-"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
-"double check /etc/pykota/pykota.conf : %s"
-msgstr ""
-"�š����%s ���. ������������١�� �������� /etc/pykota/pykota.conf : %"
-"s �����
-
-#, python-format
-msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
-msgstr "�š����%s(%s) �ҡ %s(scope=%s) �� ����觷���"
-
-#, python-format
-msgid "Problem adding LDAP entry (%s, %s)"
-msgstr "���ѭ�㹡�������� LDAP (%s, %s)"
-
-#, python-format
-msgid "Problem deleting LDAP entry (%s)"
-msgstr "���ѭ�㹡�ź����ҡ LDAP (%s, %s)"
-
-#, python-format
-msgid "Problem modifying LDAP entry (%s, %s)"
-msgstr "���ѭ�㹡��㢢���LDAP (%s, %s)"
-
-#, python-format
-msgid ""
-"Unable to find an existing objectClass %s entry with %s=%s to attach "
-"pykotaAccount objectClass"
-msgstr ""
-"���ö�鹾��������%s ���Ҷ֧�� %s=%s �����Ѻ ����Ҫԡ Pykota "
-"�������
-
-#, python-format
-msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
-msgstr "���ö�鹾�������Ҷ֧�������Ѻ pykotaGroup �������%s"
 
 msgid "PyKota Reports"
@@ -450,207 +1440,7 @@
 msgstr "���͡"
 
-msgid "Job contains no data. Printing is denied."
-msgstr "������㹧ҹ ���ʸ������
-
-msgid "Job accounting begins."
-msgstr "����ӧҹ�ͧ�Ҫԡ"
-
-msgid "Job accounting ends."
-msgstr "�����ӧҹ�ͧ�Ҫԡ"
-
-msgid "Job size forced to 0 because printing is denied."
-msgstr "��Ҵ�ͧ�ҹ�١��¹�� 0 �����ʸ������
-#, python-format
-msgid "Job size : %i"
-msgstr "��Ҵ�ҹ : %i"
-
-#, python-format
-msgid "Updating user %s's quota on printer %s"
-msgstr "��ѧ���������ͧ��� %s ����ͧ����s"
-
-msgid "Job added to history."
-msgstr "���ҹ��������
-
-#, python-format
-msgid "File number %s unregistered twice from polling object, ignored."
-msgstr "������� %s ������ŧ����� 2 ��駨ҡ������� ,���
-
-#, python-format
-msgid "SIGTERM was sent to real backend %s (pid: %s)"
-msgstr "���ҳ SIGTERM �١���ѧ��ͧ�� %s (pid: %s)"
-
-#, python-format
-msgid "CUPS backend %s died abnormally."
-msgstr "CUPS �ͧ��ͧ�� %s ����ش�ӧҹẺ�Դ�á��
-
-#, python-format
-msgid "Invalid softlimit value %s."
-msgstr "��%s �ͧ softlimit ��١��"
-
-#, python-format
-msgid "Invalid hardlimit value %s."
-msgstr "��%s �ͧ hardlimit��١�� "
-
-#, python-format
-msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
-msgstr "��Hard limit %i �������soft limit %i ������"
-
-#, python-format
-msgid "Invalid balance value %s"
-msgstr "����������١�� %s"
-
-#, python-format
-msgid "Invalid charge amount value %s"
-msgstr "����������١�� %s"
-
-#, python-format
-msgid "Invalid limitby value %s"
-msgstr "����ӡѴ %s ��١��"
-
-#, python-format
-msgid "Impossible to add printer %s"
-msgstr "���ö�ӡ�����������
-#, python-format
-msgid "Invalid printer name %s"
-msgstr "����������s ��١��"
-
-#, python-format
-msgid "There's no printer matching %s"
-msgstr "�����ͧ����s ����ҹ�"
-
-msgid "You have to pass user or group names on the command line"
-msgstr "�س���������� �����������������
-#, python-format
-msgid "Prototype %s not found in Quota Storage for printer %s."
-msgstr "������� %s �����������Ѻ��ͧ����s "
-
-#, python-format
-msgid "Prototype object %s not found in Quota Storage."
-msgstr "������ص��� %s ���������"
-
-#, python-format
-msgid "Undefined hard limit set to soft limit (%s) on printer %s."
-msgstr "���ӡ������hard limit �֧ soft limit (%s) ����ͧ����s"
-
-#, python-format
-msgid "Undefined soft limit set to hard limit (%s) on printer %s."
-msgstr "���ӡ������soft limit �֧ hard limit (%s) ����ͧ����s"
-
-#, python-format
-msgid "Invalid email address %s"
-msgstr "email address %s ��١��"
-
-#, python-format
-msgid "Invalid group name %s"
-msgstr "��͡���� %s ��١��"
-
-#, python-format
-msgid "Invalid user name %s"
-msgstr "��ͼ�� %s ��١��"
-
-#, python-format
-msgid "Quota not found for object %s on printer %s."
-msgstr "��������������Ѻ %s ����ͧ����s"
-
-#, python-format
-msgid "Group %s not found in the PyKota Storage."
-msgstr "�������� %s ��������ͧ PyKota"
-
-msgid "incompatible options, see help."
-msgstr "���͡����, ���Ҵ٨ҡ�ǹ����"
-
-#, python-format
-msgid "Printer %s already exists, skipping."
-msgstr "��ͧ����s ��١�Դ����� ���
-
-#, python-format
-msgid "Printer %s already exists, will be modified."
-msgstr "��ͧ����s ��١�Դ����� �ӡ������"
-
-msgid "in"
-msgstr "�
-
-msgid "You have to pass printer groups names on the command line"
-msgstr "�س�����͡��������캹��������
-msgid "You have to pass printer names on the command line"
-msgstr "�س������������캹��������
-msgid "Software accounting already done in first pass. Ignoring."
-msgstr "����Ϳ�������ѭ����ԡ����ǹ� ���
-
-msgid "Hardware accounting already done in first pass. Ignoring."
-msgstr "�����������ѭ����ԡ����ǹ� ���
-
-#, python-format
-msgid "Invalid DeviceURI : %s"
-msgstr "��DeviceURI : %s ��١��"
-
-msgid ""
-"\n"
-"Please wait while pkhint analyzes your printing system's configuration..."
-msgstr ""
-"\n"
-"�����pkhint �зӡ������������к����������..."
-
-#, python-format
-msgid "Unknown device %s for printer %s"
-msgstr "�������ó�s ��Ѻ��ͧ����s"
-
-msgid ""
-"\n"
-"Put the following lines into your /etc/pykota/pykota.conf file :\n"
-msgstr ""
-"\n"
-"��������Ѵ�����ŧ���/etc/pykota/pykota.conf file :\n"
-
-msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
-msgstr "# ����� : ��Ϳ�������Ҫԡ����й�
-
-msgid "# that hardware accounting wouldn't work, this only means that PyKota"
-msgstr "# ��������Ҫԡ���ö�ӧҹ�, �ѭ�������੾��Ѻ PyKota"
-
-msgid "# wasn't able to autodetect which hardware accounting method to use."
-msgstr "# ��������������Ҫԡ����ö��"
-
-#, python-format
-msgid "Invalid duration option %s"
-msgstr "������������١��"
-
-#, python-format
-msgid "Invalid loop option %s"
-msgstr "�ҵ������ӫ���١��"
-
-#, python-format
-msgid "Invalid sleep option %s"
-msgstr "���������ѡ��ͧ��١��"
-
-#, python-format
-msgid "Invalid color option %s"
-msgstr "����������١��"
-
-#, python-format
-msgid "User %s doesn't exist in PyKota's database"
-msgstr "����ͼ�� %s 㹰ҹ����ͧ PyKota"
-
-#, python-format
-msgid "Pages used on %s : %s"
-msgstr "�ӹǹ˹���仺� %s : %s"
-
-#, python-format
-msgid "PyKota Units left : %.2f"
-msgstr "˹������ͧ PyKota : %.2f"
-
-#, python-format
-msgid "Your account balance : %.2f"
-msgstr "���������ͧ�س : %.2f"
-
-#, python-format
-msgid "Job size : %i pages"
-msgstr "�ӹǹ�ҹ : %i ˹�
-
-#, python-format
-msgid "Cost on printer %s : %.2f"
-msgstr "��ҡ��������ͧ����s : %.2f"
-
-#, python-format
 msgid "Previous page"
 msgstr "˹����
+
+#~ msgid "Incorrect answer : %s"
+#~ msgstr "�ӵͺ��١�� : %s"
