[1144] | 1 | # PyKota |
---|
| 2 | # -*- coding: ISO-8859-15 -*- |
---|
[695] | 3 | |
---|
[952] | 4 | # PyKota - Print Quotas for CUPS and LPRng |
---|
[695] | 5 | # |
---|
[1257] | 6 | # (c) 2003-2004 Jerome Alet <alet@librelogiciel.com> |
---|
[873] | 7 | # This program is free software; you can redistribute it and/or modify |
---|
| 8 | # it under the terms of the GNU General Public License as published by |
---|
| 9 | # the Free Software Foundation; either version 2 of the License, or |
---|
| 10 | # (at your option) any later version. |
---|
[695] | 11 | # |
---|
[873] | 12 | # This program is distributed in the hope that it will be useful, |
---|
| 13 | # but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
| 14 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
| 15 | # GNU General Public License for more details. |
---|
| 16 | # |
---|
| 17 | # You should have received a copy of the GNU General Public License |
---|
| 18 | # along with this program; if not, write to the Free Software |
---|
| 19 | # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. |
---|
[695] | 20 | # |
---|
| 21 | # $Id$ |
---|
| 22 | # |
---|
| 23 | # $Log$ |
---|
[1541] | 24 | # Revision 1.101 2004/06/16 20:56:34 jalet |
---|
| 25 | # Smarter initialisation code |
---|
| 26 | # |
---|
[1538] | 27 | # Revision 1.100 2004/06/11 08:16:03 jalet |
---|
| 28 | # More exceptions catched in case of very early failure. |
---|
| 29 | # |
---|
[1537] | 30 | # Revision 1.99 2004/06/11 07:07:38 jalet |
---|
| 31 | # Now detects and logs configuration syntax errors instead of failing without |
---|
| 32 | # any notice message. |
---|
| 33 | # |
---|
[1532] | 34 | # Revision 1.98 2004/06/08 19:27:12 jalet |
---|
| 35 | # Doesn't ignore SIGCHLD anymore |
---|
| 36 | # |
---|
[1529] | 37 | # Revision 1.97 2004/06/07 22:45:35 jalet |
---|
| 38 | # Now accepts a job when enforcement is STRICT and predicted account balance |
---|
| 39 | # is equal to 0.0 : since the job hasn't been printed yet, only its printing |
---|
| 40 | # will really render balance equal to 0.0, so we should be allowed to print. |
---|
| 41 | # |
---|
[1523] | 42 | # Revision 1.96 2004/06/05 22:18:04 jalet |
---|
| 43 | # Now catches some exceptions earlier. |
---|
| 44 | # storage.py and ldapstorage.py : removed old comments |
---|
| 45 | # |
---|
[1517] | 46 | # Revision 1.95 2004/06/03 21:50:34 jalet |
---|
| 47 | # Improved error logging. |
---|
| 48 | # crashrecipient directive added. |
---|
| 49 | # Now exports the job's size in bytes too. |
---|
| 50 | # |
---|
[1516] | 51 | # Revision 1.94 2004/06/03 08:51:03 jalet |
---|
| 52 | # logs job's size in bytes now |
---|
| 53 | # |
---|
[1514] | 54 | # Revision 1.93 2004/06/02 21:51:02 jalet |
---|
| 55 | # Moved the sigterm capturing elsewhere |
---|
| 56 | # |
---|
[1512] | 57 | # Revision 1.92 2004/06/02 13:21:38 jalet |
---|
| 58 | # Debug message added |
---|
| 59 | # |
---|
[1497] | 60 | # Revision 1.91 2004/05/25 05:17:52 jalet |
---|
| 61 | # Now precomputes the job's size only if current printer's enforcement |
---|
| 62 | # is "STRICT" |
---|
| 63 | # |
---|
[1495] | 64 | # Revision 1.90 2004/05/24 22:45:49 jalet |
---|
| 65 | # New 'enforcement' directive added |
---|
| 66 | # Polling loop improvements |
---|
| 67 | # |
---|
[1492] | 68 | # Revision 1.89 2004/05/21 22:02:52 jalet |
---|
| 69 | # Preliminary work on pre-accounting |
---|
| 70 | # |
---|
[1483] | 71 | # Revision 1.88 2004/05/18 14:49:20 jalet |
---|
| 72 | # Big code changes to completely remove the need for "requester" directives, |
---|
| 73 | # jsut use "hardware(... your previous requester directive's content ...)" |
---|
| 74 | # |
---|
[1481] | 75 | # Revision 1.87 2004/05/17 19:14:59 jalet |
---|
| 76 | # Now catches SIGPIPE and SIGCHLD |
---|
| 77 | # |
---|
[1475] | 78 | # Revision 1.86 2004/05/13 13:59:28 jalet |
---|
| 79 | # Code simplifications |
---|
| 80 | # |
---|
[1469] | 81 | # Revision 1.85 2004/05/11 08:26:27 jalet |
---|
| 82 | # Now catches connection problems to SMTP server |
---|
| 83 | # |
---|
[1443] | 84 | # Revision 1.84 2004/04/21 08:36:32 jalet |
---|
| 85 | # Exports the PYKOTASTATUS environment variable when SIGTERM is received. |
---|
| 86 | # |
---|
[1439] | 87 | # Revision 1.83 2004/04/16 17:03:49 jalet |
---|
| 88 | # The list of printers groups the current printer is a member of is |
---|
| 89 | # now exported in the PYKOTAPGROUPS environment variable |
---|
| 90 | # |
---|
[1434] | 91 | # Revision 1.82 2004/04/13 09:38:03 jalet |
---|
| 92 | # More work on correct child processes handling |
---|
| 93 | # |
---|
[1433] | 94 | # Revision 1.81 2004/04/09 22:24:47 jalet |
---|
| 95 | # Began work on correct handling of child processes when jobs are cancelled by |
---|
| 96 | # the user. Especially important when an external requester is running for a |
---|
| 97 | # long time. |
---|
| 98 | # |
---|
[1426] | 99 | # Revision 1.80 2004/04/06 12:00:21 jalet |
---|
| 100 | # uninitialized values caused problems |
---|
| 101 | # |
---|
[1421] | 102 | # Revision 1.79 2004/03/28 21:01:29 jalet |
---|
| 103 | # PYKOTALIMITBY environment variable is now exported too |
---|
| 104 | # |
---|
[1394] | 105 | # Revision 1.78 2004/03/08 20:13:25 jalet |
---|
| 106 | # Allow names to begin with a digit |
---|
| 107 | # |
---|
[1384] | 108 | # Revision 1.77 2004/03/03 13:10:35 jalet |
---|
| 109 | # Now catches all smtplib exceptions when there's a problem sending messages |
---|
| 110 | # |
---|
[1374] | 111 | # Revision 1.76 2004/03/01 14:34:15 jalet |
---|
| 112 | # PYKOTAPHASE wasn't set at the right time at the end of data transmission |
---|
| 113 | # to underlying layer (real backend) |
---|
| 114 | # |
---|
[1372] | 115 | # Revision 1.75 2004/03/01 11:23:25 jalet |
---|
| 116 | # Pre and Post hooks to external commands are available in the cupspykota |
---|
| 117 | # backend. Forthe pykota filter they will be implemented real soon now. |
---|
| 118 | # |
---|
[1365] | 119 | # Revision 1.74 2004/02/26 14:18:07 jalet |
---|
| 120 | # Should fix the remaining bugs wrt printers groups and users groups. |
---|
| 121 | # |
---|
[1353] | 122 | # Revision 1.73 2004/02/19 14:20:21 jalet |
---|
| 123 | # maildomain pykota.conf directive added. |
---|
| 124 | # Small improvements on mail headers quality. |
---|
| 125 | # |
---|
[1290] | 126 | # Revision 1.72 2004/01/14 15:51:19 jalet |
---|
| 127 | # Docstring added. |
---|
| 128 | # |
---|
[1271] | 129 | # Revision 1.71 2004/01/11 23:22:42 jalet |
---|
| 130 | # Major code refactoring, it's way cleaner, and now allows automated addition |
---|
| 131 | # of printers on first print. |
---|
| 132 | # |
---|
[1257] | 133 | # Revision 1.70 2004/01/08 14:10:32 jalet |
---|
| 134 | # Copyright year changed. |
---|
| 135 | # |
---|
[1248] | 136 | # Revision 1.69 2004/01/05 16:02:18 jalet |
---|
| 137 | # Dots in user, groups and printer names should be allowed. |
---|
| 138 | # |
---|
[1247] | 139 | # Revision 1.68 2004/01/02 17:38:40 jalet |
---|
| 140 | # This time it should be better... |
---|
| 141 | # |
---|
[1246] | 142 | # Revision 1.67 2004/01/02 17:37:09 jalet |
---|
| 143 | # I'm completely stupid !!! Better to not talk while coding ! |
---|
| 144 | # |
---|
[1245] | 145 | # Revision 1.66 2004/01/02 17:31:26 jalet |
---|
| 146 | # Forgot to remove some code |
---|
[1240] | 147 | # |
---|
| 148 | # Revision 1.65 2003/12/06 08:14:38 jalet |
---|
| 149 | # Added support for CUPS device uris which contain authentication information. |
---|
| 150 | # |
---|
[1229] | 151 | # Revision 1.64 2003/11/29 22:03:17 jalet |
---|
| 152 | # Some code refactoring work. New code is not used at this time. |
---|
| 153 | # |
---|
[1227] | 154 | # Revision 1.63 2003/11/29 20:06:20 jalet |
---|
| 155 | # Added 'utolower' configuration option to convert all usernames to |
---|
| 156 | # lowercase when printing. All database accesses are still and will |
---|
| 157 | # remain case sensitive though. |
---|
| 158 | # |
---|
[1218] | 159 | # Revision 1.62 2003/11/25 22:37:22 jalet |
---|
| 160 | # Small code move |
---|
| 161 | # |
---|
[1217] | 162 | # Revision 1.61 2003/11/25 22:03:28 jalet |
---|
| 163 | # No more message on stderr when the translation is not available. |
---|
| 164 | # |
---|
[1216] | 165 | # Revision 1.60 2003/11/25 21:54:05 jalet |
---|
| 166 | # updated FAQ |
---|
| 167 | # |
---|
[1211] | 168 | # Revision 1.59 2003/11/25 13:33:43 jalet |
---|
| 169 | # Puts 'root' instead of '' when printing from CUPS web interface (which |
---|
| 170 | # gives an empty username) |
---|
| 171 | # |
---|
[1200] | 172 | # Revision 1.58 2003/11/21 14:28:45 jalet |
---|
| 173 | # More complete job history. |
---|
| 174 | # |
---|
[1196] | 175 | # Revision 1.57 2003/11/19 23:19:38 jalet |
---|
| 176 | # Code refactoring work. |
---|
| 177 | # Explicit redirection to /dev/null has to be set in external policy now, just |
---|
| 178 | # like in external mailto. |
---|
| 179 | # |
---|
[1193] | 180 | # Revision 1.56 2003/11/19 07:40:20 jalet |
---|
| 181 | # Missing import statement. |
---|
| 182 | # Better documentation for mailto: external(...) |
---|
| 183 | # |
---|
[1192] | 184 | # Revision 1.55 2003/11/18 23:43:12 jalet |
---|
| 185 | # Mailto can be any external command now, as usual. |
---|
| 186 | # |
---|
[1171] | 187 | # Revision 1.54 2003/10/24 21:52:46 jalet |
---|
| 188 | # Now can force language when coming from CGI script. |
---|
| 189 | # |
---|
[1152] | 190 | # Revision 1.53 2003/10/08 21:41:38 jalet |
---|
| 191 | # External policies for printers works ! |
---|
| 192 | # We can now auto-add users on first print, and do other useful things if needed. |
---|
| 193 | # |
---|
[1144] | 194 | # Revision 1.52 2003/10/07 09:07:28 jalet |
---|
| 195 | # Character encoding added to please latest version of Python |
---|
| 196 | # |
---|
[1140] | 197 | # Revision 1.51 2003/10/06 14:21:41 jalet |
---|
| 198 | # Test reversed to not retrieve group members when no messages for them. |
---|
| 199 | # |
---|
[1130] | 200 | # Revision 1.50 2003/10/02 20:23:18 jalet |
---|
| 201 | # Storage caching mechanism added. |
---|
| 202 | # |
---|
[1113] | 203 | # Revision 1.49 2003/07/29 20:55:17 jalet |
---|
| 204 | # 1.14 is out ! |
---|
| 205 | # |
---|
[1091] | 206 | # Revision 1.48 2003/07/21 23:01:56 jalet |
---|
| 207 | # Modified some messages aout soft limit |
---|
| 208 | # |
---|
[1087] | 209 | # Revision 1.47 2003/07/16 21:53:08 jalet |
---|
| 210 | # Really big modifications wrt new configuration file's location and content. |
---|
| 211 | # |
---|
[1079] | 212 | # Revision 1.46 2003/07/09 20:17:07 jalet |
---|
| 213 | # Email field added to PostgreSQL schema |
---|
| 214 | # |
---|
[1077] | 215 | # Revision 1.45 2003/07/08 19:43:51 jalet |
---|
| 216 | # Configurable warning messages. |
---|
| 217 | # Poor man's treshold value added. |
---|
| 218 | # |
---|
[1068] | 219 | # Revision 1.44 2003/07/07 11:49:24 jalet |
---|
| 220 | # Lots of small fixes with the help of PyChecker |
---|
| 221 | # |
---|
[1061] | 222 | # Revision 1.43 2003/07/04 09:06:32 jalet |
---|
| 223 | # Small bug fix wrt undefined "LimitBy" field. |
---|
| 224 | # |
---|
[1048] | 225 | # Revision 1.42 2003/06/30 12:46:15 jalet |
---|
| 226 | # Extracted reporting code. |
---|
| 227 | # |
---|
[1041] | 228 | # Revision 1.41 2003/06/25 14:10:01 jalet |
---|
| 229 | # Hey, it may work (edpykota --reset excepted) ! |
---|
| 230 | # |
---|
[1021] | 231 | # Revision 1.40 2003/06/10 16:37:54 jalet |
---|
| 232 | # Deletion of the second user which is not needed anymore. |
---|
| 233 | # Added a debug configuration field in /etc/pykota.conf |
---|
| 234 | # All queries can now be sent to the logger in debug mode, this will |
---|
| 235 | # greatly help improve performance when time for this will come. |
---|
| 236 | # |
---|
[973] | 237 | # Revision 1.39 2003/04/29 18:37:54 jalet |
---|
| 238 | # Pluggable accounting methods (actually doesn't support external scripts) |
---|
| 239 | # |
---|
[956] | 240 | # Revision 1.38 2003/04/24 11:53:48 jalet |
---|
| 241 | # Default policy for unknown users/groups is to DENY printing instead |
---|
| 242 | # of the previous default to ALLOW printing. This is to solve an accuracy |
---|
| 243 | # problem. If you set the policy to ALLOW, jobs printed by in nexistant user |
---|
| 244 | # (from PyKota's POV) will be charged to the next user who prints on the |
---|
| 245 | # same printer. |
---|
| 246 | # |
---|
[955] | 247 | # Revision 1.37 2003/04/24 08:08:27 jalet |
---|
| 248 | # Debug message forgotten |
---|
| 249 | # |
---|
[954] | 250 | # Revision 1.36 2003/04/24 07:59:40 jalet |
---|
| 251 | # LPRng support now works ! |
---|
| 252 | # |
---|
[952] | 253 | # Revision 1.35 2003/04/23 22:13:57 jalet |
---|
| 254 | # Preliminary support for LPRng added BUT STILL UNTESTED. |
---|
| 255 | # |
---|
[929] | 256 | # Revision 1.34 2003/04/17 09:26:21 jalet |
---|
| 257 | # repykota now reports account balances too. |
---|
| 258 | # |
---|
[927] | 259 | # Revision 1.33 2003/04/16 12:35:49 jalet |
---|
| 260 | # Groups quota work now ! |
---|
| 261 | # |
---|
[925] | 262 | # Revision 1.32 2003/04/16 08:53:14 jalet |
---|
| 263 | # Printing can now be limited either by user's account balance or by |
---|
| 264 | # page quota (the default). Quota report doesn't include account balance |
---|
| 265 | # yet, though. |
---|
| 266 | # |
---|
[915] | 267 | # Revision 1.31 2003/04/15 11:30:57 jalet |
---|
| 268 | # More work done on money print charging. |
---|
| 269 | # Minor bugs corrected. |
---|
| 270 | # All tools now access to the storage as priviledged users, repykota excepted. |
---|
| 271 | # |
---|
[900] | 272 | # Revision 1.30 2003/04/10 21:47:20 jalet |
---|
| 273 | # Job history added. Upgrade script neutralized for now ! |
---|
| 274 | # |
---|
[873] | 275 | # Revision 1.29 2003/03/29 13:45:27 jalet |
---|
| 276 | # GPL paragraphs were incorrectly (from memory) copied into the sources. |
---|
| 277 | # Two README files were added. |
---|
| 278 | # Upgrade script for PostgreSQL pre 1.01 schema was added. |
---|
| 279 | # |
---|
[872] | 280 | # Revision 1.28 2003/03/29 13:08:28 jalet |
---|
| 281 | # Configuration is now expected to be found in /etc/pykota.conf instead of |
---|
| 282 | # in /etc/cups/pykota.conf |
---|
| 283 | # Installation script can move old config files to the new location if needed. |
---|
| 284 | # Better error handling if configuration file is absent. |
---|
| 285 | # |
---|
[852] | 286 | # Revision 1.27 2003/03/15 23:01:28 jalet |
---|
| 287 | # New mailto option in configuration file added. |
---|
| 288 | # No time to test this tonight (although it should work). |
---|
| 289 | # |
---|
[844] | 290 | # Revision 1.26 2003/03/09 23:58:16 jalet |
---|
| 291 | # Comment |
---|
| 292 | # |
---|
[834] | 293 | # Revision 1.25 2003/03/07 22:56:14 jalet |
---|
| 294 | # 0.99 is out with some bug fixes. |
---|
| 295 | # |
---|
[825] | 296 | # Revision 1.24 2003/02/27 23:48:41 jalet |
---|
| 297 | # Correctly maps PyKota's log levels to syslog log levels |
---|
| 298 | # |
---|
[824] | 299 | # Revision 1.23 2003/02/27 22:55:20 jalet |
---|
| 300 | # WARN log priority doesn't exist. |
---|
| 301 | # |
---|
[817] | 302 | # Revision 1.22 2003/02/27 09:09:20 jalet |
---|
| 303 | # Added a method to match strings against wildcard patterns |
---|
| 304 | # |
---|
[804] | 305 | # Revision 1.21 2003/02/17 23:01:56 jalet |
---|
| 306 | # Typos |
---|
| 307 | # |
---|
[802] | 308 | # Revision 1.20 2003/02/17 22:55:01 jalet |
---|
| 309 | # More options can now be set per printer or globally : |
---|
| 310 | # |
---|
[804] | 311 | # admin |
---|
| 312 | # adminmail |
---|
| 313 | # gracedelay |
---|
| 314 | # requester |
---|
[802] | 315 | # |
---|
| 316 | # the printer option has priority when both are defined. |
---|
| 317 | # |
---|
[788] | 318 | # Revision 1.19 2003/02/10 11:28:45 jalet |
---|
| 319 | # Localization |
---|
| 320 | # |
---|
[782] | 321 | # Revision 1.18 2003/02/10 01:02:17 jalet |
---|
| 322 | # External requester is about to work, but I must sleep |
---|
| 323 | # |
---|
[773] | 324 | # Revision 1.17 2003/02/09 13:05:43 jalet |
---|
| 325 | # Internationalization continues... |
---|
| 326 | # |
---|
[772] | 327 | # Revision 1.16 2003/02/09 12:56:53 jalet |
---|
| 328 | # Internationalization begins... |
---|
| 329 | # |
---|
[764] | 330 | # Revision 1.15 2003/02/08 22:09:52 jalet |
---|
| 331 | # Name check method moved here |
---|
| 332 | # |
---|
[742] | 333 | # Revision 1.14 2003/02/07 10:42:45 jalet |
---|
| 334 | # Indentation problem |
---|
| 335 | # |
---|
[733] | 336 | # Revision 1.13 2003/02/07 08:34:16 jalet |
---|
| 337 | # Test wrt date limit was wrong |
---|
| 338 | # |
---|
[729] | 339 | # Revision 1.12 2003/02/06 23:20:02 jalet |
---|
| 340 | # warnpykota doesn't need any user/group name argument, mimicing the |
---|
| 341 | # warnquota disk quota tool. |
---|
| 342 | # |
---|
[728] | 343 | # Revision 1.11 2003/02/06 22:54:33 jalet |
---|
| 344 | # warnpykota should be ok |
---|
| 345 | # |
---|
[722] | 346 | # Revision 1.10 2003/02/06 15:03:11 jalet |
---|
| 347 | # added a method to set the limit date |
---|
| 348 | # |
---|
[715] | 349 | # Revision 1.9 2003/02/06 10:39:23 jalet |
---|
| 350 | # Preliminary edpykota work. |
---|
| 351 | # |
---|
[713] | 352 | # Revision 1.8 2003/02/06 09:19:02 jalet |
---|
| 353 | # More robust behavior (hopefully) when the user or printer is not managed |
---|
| 354 | # correctly by the Quota System : e.g. cupsFilter added in ppd file, but |
---|
| 355 | # printer and/or user not 'yet?' in storage. |
---|
| 356 | # |
---|
[712] | 357 | # Revision 1.7 2003/02/06 00:00:45 jalet |
---|
| 358 | # Now includes the printer name in email messages |
---|
| 359 | # |
---|
[711] | 360 | # Revision 1.6 2003/02/05 23:55:02 jalet |
---|
| 361 | # Cleaner email messages |
---|
| 362 | # |
---|
[709] | 363 | # Revision 1.5 2003/02/05 23:45:09 jalet |
---|
| 364 | # Better DateTime manipulation wrt grace delay |
---|
| 365 | # |
---|
[708] | 366 | # Revision 1.4 2003/02/05 23:26:22 jalet |
---|
| 367 | # Incorrect handling of grace delay |
---|
| 368 | # |
---|
[699] | 369 | # Revision 1.3 2003/02/05 22:16:20 jalet |
---|
| 370 | # DEVICE_URI is undefined outside of CUPS, i.e. for normal command line tools |
---|
| 371 | # |
---|
[698] | 372 | # Revision 1.2 2003/02/05 22:10:29 jalet |
---|
| 373 | # Typos |
---|
| 374 | # |
---|
[695] | 375 | # Revision 1.1 2003/02/05 21:28:17 jalet |
---|
| 376 | # Initial import into CVS |
---|
| 377 | # |
---|
| 378 | # |
---|
| 379 | # |
---|
| 380 | |
---|
| 381 | import sys |
---|
[1193] | 382 | import os |
---|
[817] | 383 | import fnmatch |
---|
[715] | 384 | import getopt |
---|
[695] | 385 | import smtplib |
---|
[772] | 386 | import gettext |
---|
[782] | 387 | import locale |
---|
[1434] | 388 | import signal |
---|
[1469] | 389 | import socket |
---|
[1492] | 390 | import tempfile |
---|
[1537] | 391 | import ConfigParser |
---|
[695] | 392 | |
---|
[708] | 393 | from mx import DateTime |
---|
| 394 | |
---|
[1492] | 395 | from pykota import version, config, storage, logger, accounter, pdlanalyzer |
---|
[695] | 396 | |
---|
| 397 | class PyKotaToolError(Exception): |
---|
| 398 | """An exception for PyKota config related stuff.""" |
---|
| 399 | def __init__(self, message = ""): |
---|
| 400 | self.message = message |
---|
| 401 | Exception.__init__(self, message) |
---|
| 402 | def __repr__(self): |
---|
| 403 | return self.message |
---|
| 404 | __str__ = __repr__ |
---|
| 405 | |
---|
| 406 | class PyKotaTool : |
---|
| 407 | """Base class for all PyKota command line tools.""" |
---|
[1257] | 408 | def __init__(self, lang=None, doc="PyKota %s (c) 2003-2004 %s" % (version.__version__, version.__author__)) : |
---|
[695] | 409 | """Initializes the command line tool.""" |
---|
[772] | 410 | # locale stuff |
---|
[788] | 411 | try : |
---|
[1171] | 412 | locale.setlocale(locale.LC_ALL, lang) |
---|
[788] | 413 | gettext.install("pykota") |
---|
| 414 | except (locale.Error, IOError) : |
---|
| 415 | gettext.NullTranslations().install() |
---|
[1217] | 416 | # sys.stderr.write("PyKota : Error while loading translations\n") |
---|
[772] | 417 | |
---|
| 418 | # pykota specific stuff |
---|
[715] | 419 | self.documentation = doc |
---|
[1537] | 420 | try : |
---|
| 421 | self.config = config.PyKotaConfig("/etc/pykota") |
---|
| 422 | except ConfigParser.ParsingError, msg : |
---|
| 423 | sys.stderr.write("ERROR: Problem encountered while parsing configuration file : %s\n" % msg) |
---|
| 424 | sys.stderr.flush() |
---|
| 425 | sys.exit(-1) |
---|
[1523] | 426 | try : |
---|
[1541] | 427 | self.debug = self.config.getDebug() |
---|
| 428 | self.smtpserver = self.config.getSMTPServer() |
---|
| 429 | self.maildomain = self.config.getMailDomain() |
---|
[1523] | 430 | self.logger = logger.openLogger(self.config.getLoggingBackend()) |
---|
| 431 | self.storage = storage.openConnection(self) |
---|
[1537] | 432 | except (config.PyKotaConfigError, logger.PyKotaLoggingError, storage.PyKotaStorageError), msg : |
---|
[1523] | 433 | self.crashed(msg) |
---|
| 434 | raise |
---|
[1497] | 435 | self.softwareJobSize = 0 |
---|
[1495] | 436 | self.softwareJobPrice = 0.0 |
---|
[695] | 437 | |
---|
[1130] | 438 | def logdebug(self, message) : |
---|
| 439 | """Logs something to debug output if debug is enabled.""" |
---|
| 440 | if self.debug : |
---|
| 441 | self.logger.log_message(message, "debug") |
---|
| 442 | |
---|
[1113] | 443 | def clean(self) : |
---|
| 444 | """Ensures that the database is closed.""" |
---|
| 445 | try : |
---|
| 446 | self.storage.close() |
---|
| 447 | except (TypeError, NameError, AttributeError) : |
---|
| 448 | pass |
---|
| 449 | |
---|
[715] | 450 | def display_version_and_quit(self) : |
---|
| 451 | """Displays version number, then exists successfully.""" |
---|
[1113] | 452 | self.clean() |
---|
[715] | 453 | print version.__version__ |
---|
| 454 | sys.exit(0) |
---|
| 455 | |
---|
| 456 | def display_usage_and_quit(self) : |
---|
| 457 | """Displays command line usage, then exists successfully.""" |
---|
[1113] | 458 | self.clean() |
---|
[715] | 459 | print self.documentation |
---|
| 460 | sys.exit(0) |
---|
| 461 | |
---|
[1517] | 462 | def crashed(self, message) : |
---|
| 463 | """Outputs a crash message, and optionally sends it to software author.""" |
---|
| 464 | import traceback |
---|
| 465 | lines = [] |
---|
| 466 | for line in traceback.format_exception(*sys.exc_info()) : |
---|
| 467 | lines.extend([l for l in line.split("\n") if l]) |
---|
| 468 | msg = "ERROR : ".join(["%s\n" % l for l in ([message] + lines)]) |
---|
| 469 | sys.stderr.write(msg) |
---|
| 470 | sys.stderr.flush() |
---|
[1541] | 471 | try : |
---|
| 472 | crashrecipient = self.config.getCrashRecipient() |
---|
| 473 | if crashrecipient : |
---|
[1517] | 474 | admin = self.config.getAdminMail("global") # Nice trick, isn't it ? |
---|
| 475 | fullmessage = "========== Traceback :\n\n%s\n\n========== sys.argv :\n\n%s\n\n========== Environment :\n\n%s\n" % \ |
---|
| 476 | (msg, \ |
---|
| 477 | "\n".join([" %s" % repr(a) for a in sys.argv]), \ |
---|
| 478 | "\n".join([" %s=%s" % (k, v) for (k, v) in os.environ.items()])) |
---|
| 479 | server = smtplib.SMTP(self.smtpserver) |
---|
| 480 | server.sendmail(admin, [admin, crashrecipient], "From: %s\nTo: %s\nCc: %s\nSubject: PyKota crash traceback !\n\n%s" % (admin, crashrecipient, admin, fullmessage)) |
---|
| 481 | server.quit() |
---|
[1541] | 482 | except : |
---|
| 483 | pass |
---|
[1517] | 484 | |
---|
[729] | 485 | def parseCommandline(self, argv, short, long, allownothing=0) : |
---|
[715] | 486 | """Parses the command line, controlling options.""" |
---|
| 487 | # split options in two lists: those which need an argument, those which don't need any |
---|
| 488 | withoutarg = [] |
---|
| 489 | witharg = [] |
---|
| 490 | lgs = len(short) |
---|
| 491 | i = 0 |
---|
| 492 | while i < lgs : |
---|
| 493 | ii = i + 1 |
---|
| 494 | if (ii < lgs) and (short[ii] == ':') : |
---|
| 495 | # needs an argument |
---|
| 496 | witharg.append(short[i]) |
---|
| 497 | ii = ii + 1 # skip the ':' |
---|
| 498 | else : |
---|
| 499 | # doesn't need an argument |
---|
| 500 | withoutarg.append(short[i]) |
---|
| 501 | i = ii |
---|
| 502 | |
---|
| 503 | for option in long : |
---|
| 504 | if option[-1] == '=' : |
---|
| 505 | # needs an argument |
---|
| 506 | witharg.append(option[:-1]) |
---|
| 507 | else : |
---|
| 508 | # doesn't need an argument |
---|
| 509 | withoutarg.append(option) |
---|
| 510 | |
---|
| 511 | # we begin with all possible options unset |
---|
| 512 | parsed = {} |
---|
| 513 | for option in withoutarg + witharg : |
---|
| 514 | parsed[option] = None |
---|
| 515 | |
---|
| 516 | # then we parse the command line |
---|
| 517 | args = [] # to not break if something unexpected happened |
---|
| 518 | try : |
---|
| 519 | options, args = getopt.getopt(argv, short, long) |
---|
| 520 | if options : |
---|
| 521 | for (o, v) in options : |
---|
| 522 | # we skip the '-' chars |
---|
| 523 | lgo = len(o) |
---|
| 524 | i = 0 |
---|
| 525 | while (i < lgo) and (o[i] == '-') : |
---|
| 526 | i = i + 1 |
---|
| 527 | o = o[i:] |
---|
| 528 | if o in witharg : |
---|
| 529 | # needs an argument : set it |
---|
| 530 | parsed[o] = v |
---|
| 531 | elif o in withoutarg : |
---|
| 532 | # doesn't need an argument : boolean |
---|
| 533 | parsed[o] = 1 |
---|
| 534 | else : |
---|
| 535 | # should never occur |
---|
| 536 | raise PyKotaToolError, "Unexpected problem when parsing command line" |
---|
[729] | 537 | elif (not args) and (not allownothing) and sys.stdin.isatty() : # no option and no argument, we display help if we are a tty |
---|
[715] | 538 | self.display_usage_and_quit() |
---|
| 539 | except getopt.error, msg : |
---|
| 540 | sys.stderr.write("%s\n" % msg) |
---|
| 541 | sys.stderr.flush() |
---|
| 542 | self.display_usage_and_quit() |
---|
| 543 | return (parsed, args) |
---|
| 544 | |
---|
[764] | 545 | def isValidName(self, name) : |
---|
| 546 | """Checks if a user or printer name is valid.""" |
---|
| 547 | # unfortunately Python 2.1 string modules doesn't define ascii_letters... |
---|
| 548 | asciiletters = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' |
---|
| 549 | digits = '0123456789' |
---|
[1394] | 550 | validchars = asciiletters + digits + "-_." |
---|
| 551 | for c in name : |
---|
| 552 | if c not in validchars : |
---|
| 553 | return 0 |
---|
| 554 | return 1 |
---|
[764] | 555 | |
---|
[817] | 556 | def matchString(self, s, patterns) : |
---|
| 557 | """Returns 1 if the string s matches one of the patterns, else 0.""" |
---|
| 558 | for pattern in patterns : |
---|
| 559 | if fnmatch.fnmatchcase(s, pattern) : |
---|
| 560 | return 1 |
---|
| 561 | return 0 |
---|
| 562 | |
---|
[802] | 563 | def sendMessage(self, adminmail, touser, fullmessage) : |
---|
[695] | 564 | """Sends an email message containing headers to some user.""" |
---|
| 565 | if "@" not in touser : |
---|
[1353] | 566 | touser = "%s@%s" % (touser, self.maildomain or self.smtpserver) |
---|
[1469] | 567 | try : |
---|
| 568 | server = smtplib.SMTP(self.smtpserver) |
---|
| 569 | except socket.error, msg : |
---|
| 570 | self.logger.log_message(_("Impossible to connect to SMTP server : %s") % msg, "error") |
---|
| 571 | else : |
---|
| 572 | try : |
---|
| 573 | server.sendmail(adminmail, [touser], "From: %s\nTo: %s\n%s" % (adminmail, touser, fullmessage)) |
---|
| 574 | except smtplib.SMTPException, answer : |
---|
| 575 | for (k, v) in answer.recipients.items() : |
---|
| 576 | self.logger.log_message(_("Impossible to send mail to %s, error %s : %s") % (k, v[0], v[1]), "error") |
---|
| 577 | server.quit() |
---|
[695] | 578 | |
---|
[1079] | 579 | def sendMessageToUser(self, admin, adminmail, user, subject, message) : |
---|
[695] | 580 | """Sends an email message to a user.""" |
---|
[802] | 581 | message += _("\n\nPlease contact your system administrator :\n\n\t%s - <%s>\n") % (admin, adminmail) |
---|
[1079] | 582 | self.sendMessage(adminmail, user.Email or user.Name, "Subject: %s\n\n%s" % (subject, message)) |
---|
[695] | 583 | |
---|
[802] | 584 | def sendMessageToAdmin(self, adminmail, subject, message) : |
---|
[695] | 585 | """Sends an email message to the Print Quota administrator.""" |
---|
[802] | 586 | self.sendMessage(adminmail, adminmail, "Subject: %s\n\n%s" % (subject, message)) |
---|
[695] | 587 | |
---|
[1365] | 588 | def _checkUserPQuota(self, userpquota) : |
---|
| 589 | """Checks the user quota on a printer and deny or accept the job.""" |
---|
| 590 | # then we check the user's own quota |
---|
| 591 | # if we get there we are sure that policy is not EXTERNAL |
---|
| 592 | user = userpquota.User |
---|
| 593 | printer = userpquota.Printer |
---|
[1495] | 594 | enforcement = self.config.getPrinterEnforcement(printer.Name) |
---|
[1365] | 595 | self.logdebug("Checking user %s's quota on printer %s" % (user.Name, printer.Name)) |
---|
| 596 | (policy, dummy) = self.config.getPrinterPolicy(userpquota.Printer.Name) |
---|
| 597 | if not userpquota.Exists : |
---|
| 598 | # Unknown userquota |
---|
| 599 | if policy == "ALLOW" : |
---|
| 600 | action = "POLICY_ALLOW" |
---|
| 601 | else : |
---|
| 602 | action = "POLICY_DENY" |
---|
| 603 | self.logger.log_message(_("Unable to match user %s on printer %s, applying default policy (%s)") % (user.Name, printer.Name, action)) |
---|
| 604 | else : |
---|
| 605 | pagecounter = int(userpquota.PageCounter or 0) |
---|
[1495] | 606 | if enforcement == "STRICT" : |
---|
| 607 | pagecounter += self.softwareJobSize |
---|
[1365] | 608 | if userpquota.SoftLimit is not None : |
---|
| 609 | softlimit = int(userpquota.SoftLimit) |
---|
| 610 | if pagecounter < softlimit : |
---|
| 611 | action = "ALLOW" |
---|
| 612 | else : |
---|
| 613 | if userpquota.HardLimit is None : |
---|
| 614 | # only a soft limit, this is equivalent to having only a hard limit |
---|
| 615 | action = "DENY" |
---|
| 616 | else : |
---|
| 617 | hardlimit = int(userpquota.HardLimit) |
---|
| 618 | if softlimit <= pagecounter < hardlimit : |
---|
| 619 | now = DateTime.now() |
---|
| 620 | if userpquota.DateLimit is not None : |
---|
| 621 | datelimit = DateTime.ISO.ParseDateTime(userpquota.DateLimit) |
---|
| 622 | else : |
---|
| 623 | datelimit = now + self.config.getGraceDelay(printer.Name) |
---|
| 624 | userpquota.setDateLimit(datelimit) |
---|
| 625 | if now < datelimit : |
---|
| 626 | action = "WARN" |
---|
| 627 | else : |
---|
| 628 | action = "DENY" |
---|
| 629 | else : |
---|
| 630 | action = "DENY" |
---|
| 631 | else : |
---|
| 632 | if userpquota.HardLimit is not None : |
---|
| 633 | # no soft limit, only a hard one. |
---|
| 634 | hardlimit = int(userpquota.HardLimit) |
---|
| 635 | if pagecounter < hardlimit : |
---|
| 636 | action = "ALLOW" |
---|
| 637 | else : |
---|
| 638 | action = "DENY" |
---|
| 639 | else : |
---|
| 640 | # Both are unset, no quota, i.e. accounting only |
---|
| 641 | action = "ALLOW" |
---|
| 642 | return action |
---|
| 643 | |
---|
[1041] | 644 | def checkGroupPQuota(self, grouppquota) : |
---|
[927] | 645 | """Checks the group quota on a printer and deny or accept the job.""" |
---|
[1041] | 646 | group = grouppquota.Group |
---|
| 647 | printer = grouppquota.Printer |
---|
[1495] | 648 | enforcement = self.config.getPrinterEnforcement(printer.Name) |
---|
[1365] | 649 | self.logdebug("Checking group %s's quota on printer %s" % (group.Name, printer.Name)) |
---|
[1061] | 650 | if group.LimitBy and (group.LimitBy.lower() == "balance") : |
---|
[1495] | 651 | val = group.AccountBalance |
---|
| 652 | if enforcement == "STRICT" : |
---|
| 653 | val -= self.softwareJobPrice # use precomputed size. |
---|
| 654 | if val <= 0.0 : |
---|
[1041] | 655 | action = "DENY" |
---|
[1495] | 656 | elif val <= self.config.getPoorMan() : |
---|
[1077] | 657 | action = "WARN" |
---|
[927] | 658 | else : |
---|
[1041] | 659 | action = "ALLOW" |
---|
[1529] | 660 | if (enforcement == "STRICT") and (val == 0.0) : |
---|
| 661 | action = "WARN" # we can still print until account is 0 |
---|
[927] | 662 | else : |
---|
[1495] | 663 | val = grouppquota.PageCounter |
---|
| 664 | if enforcement == "STRICT" : |
---|
| 665 | val += self.softwareJobSize |
---|
[1041] | 666 | if grouppquota.SoftLimit is not None : |
---|
| 667 | softlimit = int(grouppquota.SoftLimit) |
---|
[1495] | 668 | if val < softlimit : |
---|
[1041] | 669 | action = "ALLOW" |
---|
[927] | 670 | else : |
---|
[1041] | 671 | if grouppquota.HardLimit is None : |
---|
| 672 | # only a soft limit, this is equivalent to having only a hard limit |
---|
| 673 | action = "DENY" |
---|
[927] | 674 | else : |
---|
[1041] | 675 | hardlimit = int(grouppquota.HardLimit) |
---|
[1495] | 676 | if softlimit <= val < hardlimit : |
---|
[1041] | 677 | now = DateTime.now() |
---|
| 678 | if grouppquota.DateLimit is not None : |
---|
| 679 | datelimit = DateTime.ISO.ParseDateTime(grouppquota.DateLimit) |
---|
| 680 | else : |
---|
| 681 | datelimit = now + self.config.getGraceDelay(printer.Name) |
---|
| 682 | grouppquota.setDateLimit(datelimit) |
---|
| 683 | if now < datelimit : |
---|
| 684 | action = "WARN" |
---|
| 685 | else : |
---|
[927] | 686 | action = "DENY" |
---|
[1041] | 687 | else : |
---|
[927] | 688 | action = "DENY" |
---|
[1041] | 689 | else : |
---|
| 690 | if grouppquota.HardLimit is not None : |
---|
| 691 | # no soft limit, only a hard one. |
---|
| 692 | hardlimit = int(grouppquota.HardLimit) |
---|
[1495] | 693 | if val < hardlimit : |
---|
[927] | 694 | action = "ALLOW" |
---|
[1041] | 695 | else : |
---|
| 696 | action = "DENY" |
---|
| 697 | else : |
---|
| 698 | # Both are unset, no quota, i.e. accounting only |
---|
| 699 | action = "ALLOW" |
---|
[927] | 700 | return action |
---|
| 701 | |
---|
[1041] | 702 | def checkUserPQuota(self, userpquota) : |
---|
[1365] | 703 | """Checks the user quota on a printer and all its parents and deny or accept the job.""" |
---|
[1041] | 704 | user = userpquota.User |
---|
| 705 | printer = userpquota.Printer |
---|
| 706 | |
---|
[1365] | 707 | # indicates that a warning needs to be sent |
---|
| 708 | warned = 0 |
---|
| 709 | |
---|
[927] | 710 | # first we check any group the user is a member of |
---|
[1041] | 711 | for group in self.storage.getUserGroups(user) : |
---|
| 712 | grouppquota = self.storage.getGroupPQuota(group, printer) |
---|
[1365] | 713 | # for the printer and all its parents |
---|
| 714 | for gpquota in [ grouppquota ] + grouppquota.ParentPrintersGroupPQuota : |
---|
| 715 | if gpquota.Exists : |
---|
| 716 | action = self.checkGroupPQuota(gpquota) |
---|
| 717 | if action == "DENY" : |
---|
| 718 | return action |
---|
| 719 | elif action == "WARN" : |
---|
| 720 | warned = 1 |
---|
| 721 | |
---|
| 722 | # Then we check the user's account balance |
---|
[1152] | 723 | # if we get there we are sure that policy is not EXTERNAL |
---|
| 724 | (policy, dummy) = self.config.getPrinterPolicy(printer.Name) |
---|
[1061] | 725 | if user.LimitBy and (user.LimitBy.lower() == "balance") : |
---|
[1365] | 726 | self.logdebug("Checking account balance for user %s" % user.Name) |
---|
[1041] | 727 | if user.AccountBalance is None : |
---|
[956] | 728 | if policy == "ALLOW" : |
---|
[925] | 729 | action = "POLICY_ALLOW" |
---|
| 730 | else : |
---|
| 731 | action = "POLICY_DENY" |
---|
[1041] | 732 | self.logger.log_message(_("Unable to find user %s's account balance, applying default policy (%s) for printer %s") % (user.Name, action, printer.Name)) |
---|
[1365] | 733 | return action |
---|
[713] | 734 | else : |
---|
[1077] | 735 | val = float(user.AccountBalance or 0.0) |
---|
[1529] | 736 | enforcement = self.config.getPrinterEnforcement(printer.Name) |
---|
| 737 | if enforcement == "STRICT" : |
---|
[1495] | 738 | val -= self.softwareJobPrice # use precomputed size. |
---|
[1077] | 739 | if val <= 0.0 : |
---|
[1529] | 740 | action = "DENY" |
---|
[1077] | 741 | elif val <= self.config.getPoorMan() : |
---|
[1529] | 742 | action = "WARN" |
---|
| 743 | else : |
---|
| 744 | action = "ALLOW" |
---|
| 745 | if (enforcement == "STRICT") and (val == 0.0) : |
---|
| 746 | action = "WARN" # we can still print until account is 0 |
---|
| 747 | return action |
---|
[925] | 748 | else : |
---|
[1365] | 749 | # Then check the user quota on current printer and all its parents. |
---|
| 750 | policyallowed = 0 |
---|
| 751 | for upquota in [ userpquota ] + userpquota.ParentPrintersUserPQuota : |
---|
| 752 | action = self._checkUserPQuota(upquota) |
---|
| 753 | if action in ("DENY", "POLICY_DENY") : |
---|
| 754 | return action |
---|
| 755 | elif action == "WARN" : |
---|
| 756 | warned = 1 |
---|
| 757 | elif action == "POLICY_ALLOW" : |
---|
| 758 | policyallowed = 1 |
---|
| 759 | if warned : |
---|
| 760 | return "WARN" |
---|
| 761 | elif policyallowed : |
---|
| 762 | return "POLICY_ALLOW" |
---|
[925] | 763 | else : |
---|
[1365] | 764 | return "ALLOW" |
---|
| 765 | |
---|
[1196] | 766 | def externalMailTo(self, cmd, action, user, printer, message) : |
---|
[1192] | 767 | """Warns the user with an external command.""" |
---|
| 768 | username = user.Name |
---|
[1196] | 769 | printername = printer.Name |
---|
[1192] | 770 | email = user.Email or user.Name |
---|
| 771 | if "@" not in email : |
---|
[1353] | 772 | email = "%s@%s" % (email, self.maildomain or self.smtpserver) |
---|
[1192] | 773 | os.system(cmd % locals()) |
---|
| 774 | |
---|
[1196] | 775 | def formatCommandLine(self, cmd, user, printer) : |
---|
| 776 | """Executes an external command.""" |
---|
| 777 | username = user.Name |
---|
| 778 | printername = printer.Name |
---|
| 779 | return cmd % locals() |
---|
| 780 | |
---|
[1041] | 781 | def warnGroupPQuota(self, grouppquota) : |
---|
[927] | 782 | """Checks a group quota and send messages if quota is exceeded on current printer.""" |
---|
[1041] | 783 | group = grouppquota.Group |
---|
| 784 | printer = grouppquota.Printer |
---|
| 785 | admin = self.config.getAdmin(printer.Name) |
---|
| 786 | adminmail = self.config.getAdminMail(printer.Name) |
---|
[1192] | 787 | (mailto, arguments) = self.config.getMailTo(printer.Name) |
---|
[1068] | 788 | action = self.checkGroupPQuota(grouppquota) |
---|
[927] | 789 | if action.startswith("POLICY_") : |
---|
| 790 | action = action[7:] |
---|
| 791 | if action == "DENY" : |
---|
[1041] | 792 | adminmessage = _("Print Quota exceeded for group %s on printer %s") % (group.Name, printer.Name) |
---|
[927] | 793 | self.logger.log_message(adminmessage) |
---|
| 794 | if mailto in [ "BOTH", "ADMIN" ] : |
---|
| 795 | self.sendMessageToAdmin(adminmail, _("Print Quota"), adminmessage) |
---|
[1192] | 796 | if mailto in [ "BOTH", "USER", "EXTERNAL" ] : |
---|
[1140] | 797 | for user in self.storage.getGroupMembers(group) : |
---|
[1192] | 798 | if mailto != "EXTERNAL" : |
---|
[1245] | 799 | self.sendMessageToUser(admin, adminmail, user, _("Print Quota Exceeded"), self.config.getHardWarn(printer.Name)) |
---|
[1192] | 800 | else : |
---|
[1196] | 801 | self.externalMailTo(arguments, action, user, printer, message) |
---|
[927] | 802 | elif action == "WARN" : |
---|
[1091] | 803 | adminmessage = _("Print Quota low for group %s on printer %s") % (group.Name, printer.Name) |
---|
[927] | 804 | self.logger.log_message(adminmessage) |
---|
| 805 | if mailto in [ "BOTH", "ADMIN" ] : |
---|
| 806 | self.sendMessageToAdmin(adminmail, _("Print Quota"), adminmessage) |
---|
[1077] | 807 | if group.LimitBy and (group.LimitBy.lower() == "balance") : |
---|
| 808 | message = self.config.getPoorWarn() |
---|
| 809 | else : |
---|
| 810 | message = self.config.getSoftWarn(printer.Name) |
---|
[1192] | 811 | if mailto in [ "BOTH", "USER", "EXTERNAL" ] : |
---|
[1140] | 812 | for user in self.storage.getGroupMembers(group) : |
---|
[1192] | 813 | if mailto != "EXTERNAL" : |
---|
| 814 | self.sendMessageToUser(admin, adminmail, user, _("Print Quota Exceeded"), message) |
---|
| 815 | else : |
---|
[1196] | 816 | self.externalMailTo(arguments, action, user, printer, message) |
---|
[927] | 817 | return action |
---|
[728] | 818 | |
---|
[1041] | 819 | def warnUserPQuota(self, userpquota) : |
---|
[728] | 820 | """Checks a user quota and send him a message if quota is exceeded on current printer.""" |
---|
[1041] | 821 | user = userpquota.User |
---|
[1245] | 822 | printer = userpquota.Printer |
---|
| 823 | admin = self.config.getAdmin(printer.Name) |
---|
| 824 | adminmail = self.config.getAdminMail(printer.Name) |
---|
| 825 | (mailto, arguments) = self.config.getMailTo(printer.Name) |
---|
| 826 | action = self.checkUserPQuota(userpquota) |
---|
| 827 | if action.startswith("POLICY_") : |
---|
| 828 | action = action[7:] |
---|
| 829 | if action == "DENY" : |
---|
| 830 | adminmessage = _("Print Quota exceeded for user %s on printer %s") % (user.Name, printer.Name) |
---|
| 831 | self.logger.log_message(adminmessage) |
---|
| 832 | if mailto in [ "BOTH", "USER", "EXTERNAL" ] : |
---|
| 833 | message = self.config.getHardWarn(printer.Name) |
---|
| 834 | if mailto != "EXTERNAL" : |
---|
| 835 | self.sendMessageToUser(admin, adminmail, user, _("Print Quota Exceeded"), message) |
---|
| 836 | else : |
---|
| 837 | self.externalMailTo(arguments, action, user, printer, message) |
---|
| 838 | if mailto in [ "BOTH", "ADMIN" ] : |
---|
| 839 | self.sendMessageToAdmin(adminmail, _("Print Quota"), adminmessage) |
---|
| 840 | elif action == "WARN" : |
---|
| 841 | adminmessage = _("Print Quota low for user %s on printer %s") % (user.Name, printer.Name) |
---|
| 842 | self.logger.log_message(adminmessage) |
---|
| 843 | if mailto in [ "BOTH", "USER", "EXTERNAL" ] : |
---|
| 844 | if user.LimitBy and (user.LimitBy.lower() == "balance") : |
---|
| 845 | message = self.config.getPoorWarn() |
---|
| 846 | else : |
---|
| 847 | message = self.config.getSoftWarn(printer.Name) |
---|
| 848 | if mailto != "EXTERNAL" : |
---|
| 849 | self.sendMessageToUser(admin, adminmail, user, _("Print Quota Low"), message) |
---|
| 850 | else : |
---|
| 851 | self.externalMailTo(arguments, action, user, printer, message) |
---|
| 852 | if mailto in [ "BOTH", "ADMIN" ] : |
---|
| 853 | self.sendMessageToAdmin(adminmail, _("Print Quota"), adminmessage) |
---|
| 854 | return action |
---|
[1196] | 855 | |
---|
| 856 | class PyKotaFilterOrBackend(PyKotaTool) : |
---|
| 857 | """Class for the PyKota filter or backend.""" |
---|
| 858 | def __init__(self) : |
---|
[1290] | 859 | """Initialize local datas from current environment.""" |
---|
[1492] | 860 | # We begin with ignoring signals, we may de-ignore them later on. |
---|
| 861 | self.gotSigTerm = 0 |
---|
| 862 | signal.signal(signal.SIGTERM, signal.SIG_IGN) |
---|
[1532] | 863 | # signal.signal(signal.SIGCHLD, signal.SIG_IGN) |
---|
[1492] | 864 | signal.signal(signal.SIGPIPE, signal.SIG_IGN) |
---|
| 865 | |
---|
[1196] | 866 | PyKotaTool.__init__(self) |
---|
| 867 | (self.printingsystem, \ |
---|
| 868 | self.printerhostname, \ |
---|
| 869 | self.printername, \ |
---|
| 870 | self.username, \ |
---|
| 871 | self.jobid, \ |
---|
| 872 | self.inputfile, \ |
---|
| 873 | self.copies, \ |
---|
| 874 | self.title, \ |
---|
| 875 | self.options, \ |
---|
| 876 | self.originalbackend) = self.extractInfoFromCupsOrLprng() |
---|
[1483] | 877 | self.username = self.username or 'root' # when printing test page from CUPS web interface, username is empty |
---|
[1227] | 878 | if self.config.getUserNameToLower() : |
---|
| 879 | self.username = self.username.lower() |
---|
[1200] | 880 | self.preserveinputfile = self.inputfile |
---|
[1538] | 881 | try : |
---|
| 882 | self.accounter = accounter.openAccounter(self) |
---|
| 883 | except accounter.PyKotaAccounterError, msg : |
---|
| 884 | self.crashed(msg) |
---|
| 885 | raise |
---|
[1372] | 886 | self.exportJobInfo() |
---|
[1492] | 887 | self.jobdatastream = self.openJobDataStream() |
---|
[1517] | 888 | os.environ["PYKOTAJOBSIZEBYTES"] = str(self.jobSizeBytes) |
---|
| 889 | self.logdebug("Job size is %s bytes" % self.jobSizeBytes) |
---|
[1514] | 890 | self.logdebug("Capturing SIGTERM events.") |
---|
| 891 | signal.signal(signal.SIGTERM, self.sigterm_handler) |
---|
[1372] | 892 | |
---|
[1492] | 893 | def openJobDataStream(self) : |
---|
| 894 | """Opens the file which contains the job's datas.""" |
---|
| 895 | if self.preserveinputfile is None : |
---|
| 896 | # Job comes from sys.stdin, but this is not |
---|
| 897 | # seekable and complexifies our task, so create |
---|
| 898 | # a temporary file and use it instead |
---|
| 899 | self.logdebug("Duplicating data stream from stdin to temporary file") |
---|
| 900 | MEGABYTE = 1024*1024 |
---|
[1517] | 901 | self.jobSizeBytes = 0 |
---|
[1492] | 902 | infile = tempfile.TemporaryFile() |
---|
| 903 | while 1 : |
---|
| 904 | data = sys.stdin.read(MEGABYTE) |
---|
| 905 | if not data : |
---|
| 906 | break |
---|
[1517] | 907 | self.jobSizeBytes += len(data) |
---|
[1492] | 908 | infile.write(data) |
---|
| 909 | infile.flush() |
---|
| 910 | infile.seek(0) |
---|
| 911 | return infile |
---|
| 912 | else : |
---|
| 913 | # real file, just open it |
---|
| 914 | self.logdebug("Opening data stream %s" % self.preserveinputfile) |
---|
[1517] | 915 | self.jobSizeBytes = os.stat(self.preserveinputfile)[6] |
---|
[1492] | 916 | return open(self.preserveinputfile, "rb") |
---|
[1433] | 917 | |
---|
[1492] | 918 | def closeJobDataStream(self) : |
---|
| 919 | """Closes the file which contains the job's datas.""" |
---|
| 920 | self.logdebug("Closing data stream.") |
---|
| 921 | try : |
---|
| 922 | self.jobdatastream.close() |
---|
| 923 | except : |
---|
| 924 | pass |
---|
| 925 | |
---|
| 926 | def precomputeJobSize(self) : |
---|
| 927 | """Computes the job size with a software method.""" |
---|
[1495] | 928 | self.logdebug("Precomputing job's size with generic PDL analyzer...") |
---|
[1497] | 929 | self.jobdatastream.seek(0) |
---|
[1492] | 930 | try : |
---|
| 931 | parser = pdlanalyzer.PDLAnalyzer(self.jobdatastream) |
---|
[1495] | 932 | jobsize = parser.getJobSize() |
---|
[1492] | 933 | except pdlanalyzer.PDLAnalyzerError, msg : |
---|
| 934 | # Here we just log the failure, but |
---|
| 935 | # we finally ignore it and return 0 since this |
---|
| 936 | # computation is just an indication of what the |
---|
| 937 | # job's size MAY be. |
---|
[1512] | 938 | self.logger.log_message(_("Unable to precompute the job's size with the generic PDL analyzer : %s") % msg, "warn") |
---|
[1492] | 939 | return 0 |
---|
[1495] | 940 | else : |
---|
| 941 | if ((self.printingsystem == "CUPS") \ |
---|
| 942 | and (self.preserveinputfile is not None)) \ |
---|
| 943 | or (self.printingsystem != "CUPS") : |
---|
| 944 | return jobsize * self.copies |
---|
| 945 | else : |
---|
| 946 | return jobsize |
---|
[1492] | 947 | |
---|
[1433] | 948 | def sigterm_handler(self, signum, frame) : |
---|
[1481] | 949 | """Sets an attribute whenever SIGTERM is received.""" |
---|
[1433] | 950 | self.gotSigTerm = 1 |
---|
[1517] | 951 | os.environ["PYKOTASTATUS"] = "CANCELLED" |
---|
[1433] | 952 | self.logger.log_message(_("SIGTERM received, job %s cancelled.") % self.jobid, "info") |
---|
| 953 | |
---|
[1372] | 954 | def exportJobInfo(self) : |
---|
| 955 | """Exports job information to the environment.""" |
---|
[1517] | 956 | os.environ["PYKOTAUSERNAME"] = str(self.username) |
---|
| 957 | os.environ["PYKOTAPRINTERNAME"] = str(self.printername) |
---|
| 958 | os.environ["PYKOTAJOBID"] = str(self.jobid) |
---|
| 959 | os.environ["PYKOTATITLE"] = self.title or "" |
---|
| 960 | os.environ["PYKOTAFILENAME"] = self.preserveinputfile or "" |
---|
| 961 | os.environ["PYKOTACOPIES"] = str(self.copies) |
---|
| 962 | os.environ["PYKOTAOPTIONS"] = self.options or "" |
---|
[1196] | 963 | |
---|
[1372] | 964 | def exportUserInfo(self, userpquota) : |
---|
| 965 | """Exports user information to the environment.""" |
---|
[1517] | 966 | os.environ["PYKOTALIMITBY"] = str(userpquota.User.LimitBy) |
---|
| 967 | os.environ["PYKOTABALANCE"] = str(userpquota.User.AccountBalance or 0.0) |
---|
| 968 | os.environ["PYKOTALIFETIMEPAID"] = str(userpquota.User.LifeTimePaid or 0.0) |
---|
| 969 | os.environ["PYKOTAPAGECOUNTER"] = str(userpquota.PageCounter or 0) |
---|
| 970 | os.environ["PYKOTALIFEPAGECOUNTER"] = str(userpquota.LifePageCounter or 0) |
---|
| 971 | os.environ["PYKOTASOFTLIMIT"] = str(userpquota.SoftLimit) |
---|
| 972 | os.environ["PYKOTAHARDLIMIT"] = str(userpquota.HardLimit) |
---|
| 973 | os.environ["PYKOTADATELIMIT"] = str(userpquota.DateLimit) |
---|
[1439] | 974 | |
---|
| 975 | # not really an user information, but anyway |
---|
| 976 | # exports the list of printers groups the current |
---|
| 977 | # printer is a member of |
---|
[1517] | 978 | os.environ["PYKOTAPGROUPS"] = ",".join([p.Name for p in self.storage.getParentPrinters(userpquota.Printer)]) |
---|
| 979 | |
---|
[1372] | 980 | def prehook(self, userpquota) : |
---|
[1475] | 981 | """Allows plugging of an external hook before the job gets printed.""" |
---|
[1372] | 982 | prehook = self.config.getPreHook(userpquota.Printer.Name) |
---|
| 983 | if prehook : |
---|
| 984 | self.logdebug("Executing pre-hook [%s]" % prehook) |
---|
| 985 | os.system(prehook) |
---|
| 986 | |
---|
| 987 | def posthook(self, userpquota) : |
---|
[1475] | 988 | """Allows plugging of an external hook after the job gets printed and/or denied.""" |
---|
[1372] | 989 | posthook = self.config.getPostHook(userpquota.Printer.Name) |
---|
| 990 | if posthook : |
---|
| 991 | self.logdebug("Executing post-hook [%s]" % posthook) |
---|
| 992 | os.system(posthook) |
---|
| 993 | |
---|
[1196] | 994 | def extractInfoFromCupsOrLprng(self) : |
---|
| 995 | """Returns a tuple (printingsystem, printerhostname, printername, username, jobid, filename, title, options, backend). |
---|
| 996 | |
---|
| 997 | Returns (None, None, None, None, None, None, None, None, None, None) if no printing system is recognized. |
---|
| 998 | """ |
---|
| 999 | # Try to detect CUPS |
---|
| 1000 | if os.environ.has_key("CUPS_SERVERROOT") and os.path.isdir(os.environ.get("CUPS_SERVERROOT", "")) : |
---|
| 1001 | if len(sys.argv) == 7 : |
---|
| 1002 | inputfile = sys.argv[6] |
---|
| 1003 | else : |
---|
| 1004 | inputfile = None |
---|
| 1005 | |
---|
| 1006 | # check that the DEVICE_URI environment variable's value is |
---|
| 1007 | # prefixed with "cupspykota:" otherwise don't touch it. |
---|
| 1008 | # If this is the case, we have to remove the prefix from |
---|
| 1009 | # the environment before launching the real backend in cupspykota |
---|
| 1010 | device_uri = os.environ.get("DEVICE_URI", "") |
---|
| 1011 | if device_uri.startswith("cupspykota:") : |
---|
| 1012 | fulldevice_uri = device_uri[:] |
---|
| 1013 | device_uri = fulldevice_uri[len("cupspykota:"):] |
---|
| 1014 | if device_uri.startswith("//") : # lpd (at least) |
---|
| 1015 | device_uri = device_uri[2:] |
---|
| 1016 | os.environ["DEVICE_URI"] = device_uri # TODO : side effect ! |
---|
| 1017 | # TODO : check this for more complex urls than ipp://myprinter.dot.com:631/printers/lp |
---|
| 1018 | try : |
---|
| 1019 | (backend, destination) = device_uri.split(":", 1) |
---|
| 1020 | except ValueError : |
---|
| 1021 | raise PyKotaToolError, "Invalid DEVICE_URI : %s\n" % device_uri |
---|
| 1022 | while destination.startswith("/") : |
---|
| 1023 | destination = destination[1:] |
---|
[1240] | 1024 | checkauth = destination.split("@", 1) |
---|
| 1025 | if len(checkauth) == 2 : |
---|
| 1026 | destination = checkauth[1] |
---|
[1196] | 1027 | printerhostname = destination.split("/")[0].split(":")[0] |
---|
| 1028 | return ("CUPS", \ |
---|
| 1029 | printerhostname, \ |
---|
| 1030 | os.environ.get("PRINTER"), \ |
---|
[1216] | 1031 | sys.argv[2].strip(), \ |
---|
[1196] | 1032 | sys.argv[1].strip(), \ |
---|
| 1033 | inputfile, \ |
---|
| 1034 | int(sys.argv[4].strip()), \ |
---|
| 1035 | sys.argv[3], \ |
---|
| 1036 | sys.argv[5], \ |
---|
| 1037 | backend) |
---|
| 1038 | else : |
---|
| 1039 | # Try to detect LPRng |
---|
[1200] | 1040 | # TODO : try to extract filename, job's title, and options if available |
---|
[1196] | 1041 | jseen = Pseen = nseen = rseen = Kseen = None |
---|
| 1042 | for arg in sys.argv : |
---|
| 1043 | if arg.startswith("-j") : |
---|
| 1044 | jseen = arg[2:].strip() |
---|
| 1045 | elif arg.startswith("-n") : |
---|
| 1046 | nseen = arg[2:].strip() |
---|
| 1047 | elif arg.startswith("-P") : |
---|
| 1048 | Pseen = arg[2:].strip() |
---|
| 1049 | elif arg.startswith("-r") : |
---|
| 1050 | rseen = arg[2:].strip() |
---|
| 1051 | elif arg.startswith("-K") or arg.startswith("-#") : |
---|
| 1052 | Kseen = int(arg[2:].strip()) |
---|
| 1053 | if Kseen is None : |
---|
| 1054 | Kseen = 1 # we assume the user wants at least one copy... |
---|
| 1055 | if (rseen is None) and jseen and Pseen and nseen : |
---|
| 1056 | self.logger.log_message(_("Printer hostname undefined, set to 'localhost'"), "warn") |
---|
| 1057 | rseen = "localhost" |
---|
| 1058 | if jseen and Pseen and nseen and rseen : |
---|
| 1059 | # job is always in stdin (None) |
---|
| 1060 | return ("LPRNG", rseen, Pseen, nseen, jseen, None, Kseen, None, None, None) |
---|
| 1061 | self.logger.log_message(_("Printing system unknown, args=%s") % " ".join(sys.argv), "warn") |
---|
| 1062 | return (None, None, None, None, None, None, None, None, None, None) # Unknown printing system |
---|
[1229] | 1063 | |
---|
| 1064 | def getPrinterUserAndUserPQuota(self) : |
---|
| 1065 | """Returns a tuple (policy, printer, user, and user print quota) on this printer. |
---|
| 1066 | |
---|
| 1067 | "OK" is returned in the policy if both printer, user and user print quota |
---|
| 1068 | exist in the Quota Storage. |
---|
| 1069 | Otherwise, the policy as defined for this printer in pykota.conf is returned. |
---|
| 1070 | |
---|
| 1071 | If policy was set to "EXTERNAL" and one of printer, user, or user print quota |
---|
| 1072 | doesn't exist in the Quota Storage, then an external command is launched, as |
---|
| 1073 | defined in the external policy for this printer in pykota.conf |
---|
| 1074 | This external command can do anything, like automatically adding printers |
---|
| 1075 | or users, for example, and finally extracting printer, user and user print |
---|
| 1076 | quota from the Quota Storage is tried a second time. |
---|
| 1077 | |
---|
| 1078 | "EXTERNALERROR" is returned in case policy was "EXTERNAL" and an error status |
---|
| 1079 | was returned by the external command. |
---|
| 1080 | """ |
---|
[1245] | 1081 | for passnumber in range(1, 3) : |
---|
[1229] | 1082 | printer = self.storage.getPrinter(self.printername) |
---|
| 1083 | user = self.storage.getUser(self.username) |
---|
| 1084 | userpquota = self.storage.getUserPQuota(user, printer) |
---|
| 1085 | if printer.Exists and user.Exists and userpquota.Exists : |
---|
| 1086 | policy = "OK" |
---|
| 1087 | break |
---|
| 1088 | (policy, args) = self.config.getPrinterPolicy(self.printername) |
---|
| 1089 | if policy == "EXTERNAL" : |
---|
| 1090 | commandline = self.formatCommandLine(args, user, printer) |
---|
| 1091 | if not printer.Exists : |
---|
| 1092 | self.logger.log_message(_("Printer %s not registered in the PyKota system, applying external policy (%s) for printer %s") % (self.printername, commandline, self.printername), "info") |
---|
| 1093 | if not user.Exists : |
---|
| 1094 | self.logger.log_message(_("User %s not registered in the PyKota system, applying external policy (%s) for printer %s") % (self.username, commandline, self.printername), "info") |
---|
| 1095 | if not userpquota.Exists : |
---|
| 1096 | self.logger.log_message(_("User %s doesn't have quota on printer %s in the PyKota system, applying external policy (%s) for printer %s") % (self.username, self.printername, commandline, self.printername), "info") |
---|
| 1097 | if os.system(commandline) : |
---|
| 1098 | self.logger.log_message(_("External policy %s for printer %s produced an error. Job rejected. Please check PyKota's configuration files.") % (commandline, self.printername), "error") |
---|
| 1099 | policy = "EXTERNALERROR" |
---|
| 1100 | break |
---|
| 1101 | else : |
---|
[1271] | 1102 | if not printer.Exists : |
---|
| 1103 | self.logger.log_message(_("Printer %s not registered in the PyKota system, applying default policy (%s)") % (self.printername, policy), "info") |
---|
| 1104 | if not user.Exists : |
---|
| 1105 | self.logger.log_message(_("User %s not registered in the PyKota system, applying default policy (%s) for printer %s") % (self.username, policy, self.printername), "info") |
---|
| 1106 | if not userpquota.Exists : |
---|
| 1107 | self.logger.log_message(_("User %s doesn't have quota on printer %s in the PyKota system, applying default policy (%s)") % (self.username, self.printername, policy), "info") |
---|
[1229] | 1108 | break |
---|
[1271] | 1109 | if policy == "EXTERNAL" : |
---|
| 1110 | if not printer.Exists : |
---|
| 1111 | self.logger.log_message(_("Printer %s still not registered in the PyKota system, job will be rejected") % self.printername, "info") |
---|
| 1112 | if not user.Exists : |
---|
| 1113 | self.logger.log_message(_("User %s still not registered in the PyKota system, job will be rejected on printer %s") % (self.username, self.printername), "info") |
---|
| 1114 | if not userpquota.Exists : |
---|
| 1115 | self.logger.log_message(_("User %s still doesn't have quota on printer %s in the PyKota system, job will be rejected") % (self.username, self.printername), "info") |
---|
[1229] | 1116 | return (policy, printer, user, userpquota) |
---|
| 1117 | |
---|
[1271] | 1118 | def mainWork(self) : |
---|
[1229] | 1119 | """Main work is done here.""" |
---|
| 1120 | (policy, printer, user, userpquota) = self.getPrinterUserAndUserPQuota() |
---|
[1271] | 1121 | # TODO : check for last user's quota in case pykota filter is used with querying |
---|
[1229] | 1122 | if policy == "EXTERNALERROR" : |
---|
| 1123 | # Policy was 'EXTERNAL' and the external command returned an error code |
---|
[1271] | 1124 | return self.removeJob() |
---|
[1229] | 1125 | elif policy == "EXTERNAL" : |
---|
| 1126 | # Policy was 'EXTERNAL' and the external command wasn't able |
---|
| 1127 | # to add either the printer, user or user print quota |
---|
[1271] | 1128 | return self.removeJob() |
---|
| 1129 | elif policy == "DENY" : |
---|
[1229] | 1130 | # Either printer, user or user print quota doesn't exist, |
---|
| 1131 | # and the job should be rejected. |
---|
[1271] | 1132 | return self.removeJob() |
---|
| 1133 | else : |
---|
| 1134 | if policy not in ("OK", "ALLOW") : |
---|
| 1135 | self.logger.log_message(_("Invalid policy %s for printer %s") % (policy, self.printername)) |
---|
| 1136 | return self.removeJob() |
---|
| 1137 | else : |
---|
| 1138 | return self.doWork(policy, printer, user, userpquota) |
---|