root / pykota / trunk / po / pykota.pot @ 1797

# PyKota
#
# PyKota : Print Quotas for CUPS and LPRng
#
# (c) 2003-2004 Jerome Alet <alet@librelogiciel.com>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
#
# $Id$
#
# PyKota translation master file.
# Copyright (c) 2003-2004 Conseil Internet & Logiciels Libres
# Jerome Alet <alet@librelogiciel.com>, 2003-2004.
#
msgid ""
msgstr ""
"Project-Id-Version: PyKota v1.20\n"
"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
"POT-Creation-Date: 2004-10-11 14:49+0200\n"
"PO-Revision-Date: 2004-07-21 15:35:00+0100\n"
"Last-Translator: Jerome Alet <alet@librelogiciel.com>\n"
"Language-Team: English <alet@librelogiciel.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"

#, python-format
msgid ""
"autopykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A tool to automate user account creation and initial balance setting.\n"
"\n"
"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
"\n"
"command line usage :\n"
"\n"
"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
"  OF AN external policy IN pykota.conf\n"
"  \n"
"  autopykota { -i | --initbalance value } \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
"                       If the user already exists, actual balance is left\n"
"                       unmodified. If unset, the default value is 0.\n"
"                       \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid ""
"edpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A Print Quota editor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  edpykota [options] user1 user2 ... userN\n"
"  \n"
"  edpykota [options] group1 group2 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users and/or printers if they don't \n"
"                       exist on the Quota Storage Server.\n"
"                       \n"
"  -d | --delete        Deletes users/groups from the quota storage.\n"
"                       Printers are never deleted.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
"                       for a particular printer. Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point values are allowed.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
"                              listed, separated by commas. The groups\n"
"                              must already exist in the Quota Storage.\n"
"  \n"
"  -u | --users         Edit users print quotas, this is the default.\n"
"  \n"
"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers. \n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
"                       pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"  \n"
"  -g | --groups        Edit users groups print quotas instead of users.\n"
"                          \n"
"  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
"                       print quotas\n"
"                       \n"
"  -n | --noquota       Doesn't set a quota but only does accounting.\n"
"  \n"
"  -r | --reset         Resets the actual page counter for the user\n"
"                       or group to zero on the specified printers. \n"
"                       The life time page counter is kept unchanged.\n"
"                       \n"
"  -R | --hardreset     Resets the actual and life time page counters\n"
"                       for the user or group to zero on the specified \n"
"                       printers. \n"
"                       \n"
"  -l | --limitby l     Choose if the user/group is limited in "
"printing                     \n"
"                       by its account balance or by its page quota.\n"
"                       The default value is 'quota'. Allowed values\n"
"                       are 'quota' 'balance' 'quota-then-balance' and\n"
"                       'balance-then-quota'.\n"
"                       WARNING : quota-then-balance and balance-then-quota\n"
"                       are not yet implemented.\n"
"                       \n"
"  -b | --balance b     Sets the user's account balance to "
"b.                     \n"
"                       Account balance may be increase or decreased\n"
"                       if b is prefixed with + or -.\n"
"                       WARNING : when decreasing account balance,\n"
"                       the total paid so far by the user is decreased\n"
"                       too.\n"
"                       Groups don't have a real balance, but the\n"
"                       sum of their users' account balance.\n"
"                       \n"
"  -S | --softlimit sl  Sets the quota soft limit to sl "
"pages.                       \n"
"  \n"
"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
"  \n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
"  \n"
"  This will add users john, paul, george and ringo to the quota\n"
"  database, and set their print quotas to the same values than user \n"
"  jerome. User jerome must already exist.\n"
"  User ringo's email address will also be set to 'ringo@example.com'\n"
"  \n"
"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
"  \n"
"  This will set jerome's print quota on the lp printer to a soft limit\n"
"  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
"  printer lp doesn't exist on the Quota Storage Server then nothing is "
"done.\n"
"\n"
"  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
"  \n"
"  Same as above, but if either user jerome or printer lp doesn't exist \n"
"  on the Quota Storage Server they are automatically added. Also\n"
"  user jerome is put into the groups \"coders\" and \"it\" which must\n"
"  already exist in the Quota Storage.\n"
"            \n"
"  $ edpykota -g -S 500 -H 550 financial support            \n"
"  \n"
"  This will set print quota soft limit to 500 pages and hard limit\n"
"  to 550 pages for groups financial and support on all printers.\n"
"  \n"
"  $ edpykota --reset jerome \"jo*\"\n"
"  \n"
"  This will reset jerome's page counter to zero on all printers, as\n"
"  well as every user whose name begins with 'jo'.\n"
"  Their life time page counter on each printer will be kept unchanged.\n"
"  You can also reset the life time page counters by using the\n"
"  --hardreset | -R command line option.\n"
"  \n"
"  $ edpykota --printer hpcolor --noquota jerome\n"
"  \n"
"  This will tell PyKota to not limit jerome when printing on the \n"
"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
"  accounting of the pages he prints will still be kept.\n"
"  Print Quotas for jerome on other printers are unchanged.\n"
"  \n"
"  $ edpykota --limitby balance jerome\n"
"  \n"
"  This will tell PyKota to limit jerome by his account's balance\n"
"  when printing.\n"
"  \n"
"  $ edpykota --balance +10.0 jerome\n"
"  \n"
"  This will increase jerome's account balance by 10.0 (in your\n"
"  own currency). You can decrease the account balance with a\n"
"  dash prefix, and set it to a fixed amount with no prefix.\n"
"  \n"
"  $ edpykota --delete jerome rachel\n"
"  \n"
"  This will completely delete jerome and rachel from the Quota Storage\n"
"  database. All their quotas and jobs will be deleted too.\n"
"  \n"
"  $ edpykota --printer lp --charge 0.1\n"
"  \n"
"  This will set the page price for printer lp to 0.1. Job price\n"
"  will not be changed.\n"
"  \n"
"  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
"  \n"
"  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
"  When printing either on hplj1 or hplj2, print quota will also be \n"
"  checked and accounted for on virtual printers Laser and HP.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "You're not allowed to use this command."
msgstr ""

#, python-format
msgid "Invalid softlimit value %s."
msgstr ""

#, python-format
msgid "Invalid hardlimit value %s."
msgstr ""

#, python-format
msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
msgstr ""

#, python-format
msgid "Invalid balance value %s"
msgstr ""

#, python-format
msgid "Invalid charge amount value %s"
msgstr ""

#, python-format
msgid "Invalid limitby value %s"
msgstr ""

#, python-format
msgid "Impossible to add printer %s"
msgstr ""

#, python-format
msgid "Invalid printer name %s"
msgstr ""

#, python-format
msgid "There's no printer matching %s"
msgstr ""

msgid "You have to pass user or group names on the command line"
msgstr ""

#, python-format
msgid "Prototype %s not found in Quota Storage for printer %s."
msgstr ""

#, python-format
msgid "Prototype object %s not found in Quota Storage."
msgstr ""

#, python-format
msgid "Undefined hard limit set to soft limit (%s) on printer %s."
msgstr ""

#, python-format
msgid "Undefined soft limit set to hard limit (%s) on printer %s."
msgstr ""

#, python-format
msgid "Invalid email address %s"
msgstr ""

#, python-format
msgid "Invalid group name %s"
msgstr ""

#, python-format
msgid "Invalid user name %s"
msgstr ""

#, python-format
msgid "Quota not found for object %s on printer %s."
msgstr ""

#, python-format
msgid "Group %s not found in the PyKota Storage."
msgstr ""

msgid "incompatible options, see help."
msgstr ""

#, python-format
msgid ""
"pykosd v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"An OSD quota monitor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pykosd [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
"                       triplet, for example #FF0000 is 100%% red.\n"
"                       Defaults to 100%% green (#00FF00).\n"
"                       \n"
"  -d | --duration d    Sets the duration of the display in seconds. \n"
"                       Defaults to 3 seconds.\n"
"                       \n"
"  -f | --font f        Sets the font to use for "
"display.                      \n"
"                       Defaults to the Python OSD library's default.\n"
"  \n"
"  -l | --loop n        Sets the number of times the info will be displayed.\n"
"                       Defaults to 0, which means loop forever.\n"
"                       \n"
"  -s | --sleep s       Sets the sleeping duration between two displays \n"
"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
"                       \n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykosd -s 60 --loop 5\n"
"  \n"
"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
"  and will last for 3 seconds (the default) each time. After five\n"
"  iterations, the program will exit.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid duration option %s"
msgstr ""

#, python-format
msgid "Invalid loop option %s"
msgstr ""

#, python-format
msgid "Invalid sleep option %s"
msgstr ""

#, python-format
msgid "Invalid color option %s"
msgstr ""

#, python-format
msgid "User %s doesn't exist in PyKota's database"
msgstr ""

#, python-format
msgid "Pages used on %s : %s"
msgstr ""

#, python-format
msgid "PyKota Units left : %.2f"
msgstr ""

#, python-format
msgid ""
"warnpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Sends mail to users over print quota.\n"
"\n"
"command line usage :\n"
"\n"
"  warnpykota  [options]  [names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints warnpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Warns users over their print quota, this is the \n"
"                       default.\n"
"  \n"
"  -g | --groups        Warns users whose groups quota are over limit.\n"
"  \n"
"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ warnpykota --printer lp\n"
"  \n"
"  This will warn all users of the lp printer who have exceeded their\n"
"  print quota.\n"
"\n"
"  $ warnpykota \n"
"  \n"
"  This will warn all users  who have exceeded their print quota on\n"
"  any printer.\n"
"\n"
"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
"  \n"
"  This will warn all users of groups which names begins with \"dev\" and\n"
"  who have exceeded their print quota on any printer which name begins \n"
"  with \"laserjet\"\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

msgid "Job contains no data. Printing is denied."
msgstr ""

msgid "Job accounting begins."
msgstr ""

msgid "Job accounting ends."
msgstr ""

msgid "Job size forced to 0 because printing is denied."
msgstr ""

#, python-format
msgid "Job size : %i"
msgstr ""

#, python-format
msgid "Updating user %s's quota on printer %s"
msgstr ""

msgid "Job added to history."
msgstr ""

#, python-format
msgid "File number %s unregistered twice from polling object, ignored."
msgstr ""

#, python-format
msgid "SIGTERM was sent to real backend %s (pid: %s)"
msgstr ""

#, python-format
msgid "CUPS backend %s died abnormally."
msgstr ""

#, python-format
msgid ""
"dumpykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Dumps PyKota database's content.\n"
"\n"
"command line usage :\n"
"\n"
"  dumpykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints dumpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
"                       \n"
"                         - history : dumps the jobs history.\n"
"                         - users : dumps users.\n"
"                         - groups : dumps user groups.\n"
"                         - printers : dump printers.\n"
"                         - upquotas : dump user quotas.\n"
"                         - gpquotas : dump user groups quotas.\n"
"                         - payments : dumps user payments.\n"
"                         - pmembers : dumps printer groups members.\n"
"                         - umembers : dumps user groups members.\n"
"                         \n"
"                       NB : the -d | --data command line option   \n"
"                       is MANDATORY.\n"
"  \n"
"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
"                       the format is to dump datas in the csv format (comma\n"
"                       separated values). All data dumped is between double\n"
"                       quotes. Allowed formats are :\n"
"                       \n"
"                         - csv : separate datas with commas\n"
"                         - ssv : separate datas with semicolons\n"
"                         - tsv : separate datas with tabs\n"
"                         - xml : dump data as XML\n"
"                         \n"
"  -o | --output fname  All datas will be dumped to the file instead of\n"
"                       to the standard output. The special '-' filename\n"
"                       is the default value and means stdout.\n"
"                       WARNING : existing files are truncated !\n"
"  \n"
"Examples :\n"
"\n"
"  $ dumpykota --data history --format csv >myfile.csv\n"
"  \n"
"  This dumps the history in a comma separated values file, for possible\n"
"  use in a spreadsheet.\n"
"  \n"
"  $ dumpykota --data users --format xml -o users.xml\n"
"  \n"
"  Dumps all users datas to the users.xml file.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --data command line option, see help."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --format command line option, see help."
msgstr ""

msgid "XML output is disabled because the jaxml module is not available."
msgstr ""

msgid "PyKota data dumper failed : I/O error"
msgstr ""

msgid "The -d | --data command line option is mandatory, see help."
msgstr ""

msgid "Too many arguments, see help."
msgstr ""

msgid "Software accounting already done in first pass. Ignoring."
msgstr ""

msgid "Hardware accounting already done in first pass. Ignoring."
msgstr ""

#, python-format
msgid ""
"pkhint v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A tool to give hints on what accounting method is best for each printer.\n"
"\n"
"command line usage :\n"
"\n"
"  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkhint's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
"  \n"
"  Will analyze your printing system to test which accounter\n"
"  is the best for each of the defined printer which\n"
"  name matches one of the parameters.\n"
"  \n"
"  If you don't pass any argument on the command line, all\n"
"  printers will be analyzed.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Invalid DeviceURI : %s"
msgstr ""

msgid ""
"\n"
"Please wait while pkhint analyzes your printing system's configuration..."
msgstr ""

#, python-format
msgid "Unknown device %s for printer %s"
msgstr ""

msgid ""
"\n"
"Put the following lines into your /etc/pykota/pykota.conf file :\n"
msgstr ""

msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
msgstr ""

msgid "# that hardware accounting wouldn't work, this only means that PyKota"
msgstr ""

msgid "# wasn't able to autodetect which hardware accounting method to use."
msgstr ""

#, python-format
msgid ""
"pkprinters v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"A Printers Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds printers if they don't exist on the Quota \n"
"                       Storage Server. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes printers from the quota storage.\n"
"  \n"
"  -D | --description   Adds a textual description to printers.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
"                       Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point and negative values are allowed.\n"
"  \n"
"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
"                       groups pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"                       If the --remove option below is not used, the \n"
"                       default action is to add printers to the specified\n"
"                       printer groups.\n"
"                       \n"
"  -l | --list          List informations about the printer(s) and the\n"
"                       printers groups it is a member of.\n"
"                       \n"
"  -r | --remove        In combination with the --groups option "
"above,                       \n"
"                       remove printers from the specified printers groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkprinters to not modify existing printers.\n"
"  \n"
"  printer1 through printerN can contain wildcards if the --add option \n"
"  is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
"hp8000\n"
"  \n"
"  Will create three printers named hp2100, hp2200 and hp8000.\n"
"  Their price per page will be set at 0.05 unit, and their price\n"
"  per job will be set at 0.1 unit. Units are in your own currency,\n"
"  or whatever you want them to mean.\n"
"  All of their descriptions will be set to the string \"HP Printer\".\n"
"  If any of these printers already exists, it will also be modified \n"
"  unless the -s|--skipexisting command line option is also used.\n"
"            \n"
"  $ pkprinters --delete \"*\"\n"
"  \n"
"  This will completely delete all printers and associated quota "
"information,\n"
"  as well as their job history. USE WITH CARE !\n"
"  \n"
"  $ pkprinters --groups Laser,HP \"hp*\"\n"
"  \n"
"  This will put all printers which name matches \"hp*\" into printers "
"groups \n"
"  Laser and HP, which MUST already exist.\n"
"  \n"
"  $ pkprinters --groups LexMark --remove hp2200\n"
"  \n"
"  This will remove the hp2200 printer from the LexMark printer group.\n"
"  \n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Printer %s already exists, skipping."
msgstr ""

#, python-format
msgid "Printer %s already exists, will be modified."
msgstr ""

msgid "in"
msgstr ""

msgid "You have to pass printer groups names on the command line"
msgstr ""

msgid "You have to pass printer names on the command line"
msgstr ""

#, python-format
msgid ""
"pykotme v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Gives print quotes to users.\n"
"\n"
"command line usage :\n"
"\n"
"  pykotme  [options]  [files]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykotme's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykotme --printer apple file1.ps file2.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps and file2.ps \n"
"  which would be sent to the apple printer.\n"
"  \n"
"  $ pykotme --printer apple,hplaser <file1.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps as read from\n"
"  standard input, which would be sent to the apple or hplaser\n"
"  printer.\n"
"\n"
"  $ pykotme \n"
"  \n"
"  This will give a quote for a job consisting of what is on standard \n"
"  input. The quote will list the job size, and the price the job\n"
"  would cost on each printer.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Your account balance : %.2f"
msgstr ""

#, python-format
msgid "Job size : %i pages"
msgstr ""

#, python-format
msgid "Cost on printer %s : %.2f"
msgstr ""

#, python-format
msgid ""
"repykota v%s (c) 2003-2004 C@LL - Conseil Internet & Logiciels Libres\n"
"\n"
"Generates print quota reports.\n"
"\n"
"command line usage :\n"
"\n"
"  repykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints repykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Generates a report on users quota, this is \n"
"                       the default.\n"
"  \n"
"  -g | --groups        Generates a report on group quota instead of users.\n"
"  \n"
"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ repykota --printer lp\n"
"  \n"
"  This will print the quota status for all users who use the lp printer.\n"
"\n"
"  $ repykota \n"
"  \n"
"  This will print the quota status for all users on all printers.\n"
"  \n"
"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
"  \n"
"  This will print the quota status for user jerome and all users\n"
"  whose name begins with \"jo\" on all printers which name begins\n"
"  with \"laser\" or ends with \"pson\".\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
"Please e-mail bugs to: %s"
msgstr ""

#, python-format
msgid "Unsupported accounter backend %s"
msgstr ""

#, python-format
msgid "Configuration file %s not found."
msgstr ""

#, python-format
msgid "Option %s not found in section global of %s"
msgstr ""

#, python-format
msgid "Option %s not found in section %s of %s"
msgstr ""

#, python-format
msgid "Option logger only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid accounter %s for printer %s"
msgstr ""

#, python-format
msgid "Option accounter in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option enforcement in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option onaccountererror in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid policy %s for printer %s"
msgstr ""

#, python-format
msgid "Option policy in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid option mailto %s for printer %s"
msgstr ""

#, python-format
msgid "Option mailto in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid grace delay %s"
msgstr ""

#, python-format
msgid "Invalid poor man's threshold %s"
msgstr ""

msgid ""
"Your Print Quota account balance is Low.\n"
"Soon you'll not be allowed to print anymore.\n"
"Please contact the Print Quota Administrator to solve the problem."
msgstr ""

#, python-format
msgid ""
"You are not allowed to print anymore because\n"
"your Print Quota is exceeded on printer %s."
msgstr ""

#, python-format
msgid ""
"You will soon be forbidden to print anymore because\n"
"your Print Quota is almost reached on printer %s."
msgstr ""

#, python-format
msgid "Unsupported logging subsystem %s"
msgstr ""

#, python-format
msgid "Report for %s quota on printer %s"
msgstr ""

#, python-format
msgid "Pages grace time: %i days"
msgstr ""

#, python-format
msgid "Price per job: %.3f"
msgstr ""

#, python-format
msgid "Price per page: %.3f"
msgstr ""

msgid ""
"Group           used    soft    hard    balance grace         total       "
"paid"
msgstr ""

msgid ""
"User            used    soft    hard    balance grace         total       "
"paid"
msgstr ""

msgid "unknown"
msgstr ""

#, python-format
msgid "Real : %s"
msgstr ""

#, python-format
msgid "Total : %9i"
msgstr ""

#, python-format
msgid "Unsupported reporter backend %s"
msgstr ""

#, python-format
msgid "Unsupported quota storage backend %s"
msgstr ""

#, python-format
msgid "Impossible to connect to SMTP server : %s"
msgstr ""

#, python-format
msgid "Impossible to send mail to %s, error %s : %s"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Please contact your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""

#, python-format
msgid "Unable to match user %s on printer %s, applying default policy (%s)"
msgstr ""

#, python-format
msgid ""
"Unable to find user %s's account balance, applying default policy (%s) for "
"printer %s"
msgstr ""

#, python-format
msgid "Print Quota exceeded for group %s on printer %s"
msgstr ""

msgid "Print Quota"
msgstr ""

msgid "Print Quota Exceeded"
msgstr ""

#, python-format
msgid "Print Quota low for group %s on printer %s"
msgstr ""

#, python-format
msgid "Print Quota exceeded for user %s on printer %s"
msgstr ""

#, python-format
msgid "Print Quota low for user %s on printer %s"
msgstr ""

msgid "Print Quota Low"
msgstr ""

#, python-format
msgid "Printing system %s, args=%s"
msgstr ""

#, python-format
msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
msgstr ""

#, python-format
msgid "SIGTERM received, job %s cancelled."
msgstr ""

msgid "Printer hostname undefined, set to 'localhost'"
msgstr ""

#, python-format
msgid "Printing system unknown, args=%s"
msgstr ""

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying external policy (%"
"s) for printer %s"
msgstr ""

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying external policy (%s) "
"for printer %s"
msgstr ""

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"external policy (%s) for printer %s"
msgstr ""

#, python-format
msgid ""
"External policy %s for printer %s produced an error. Job rejected. Please "
"check PyKota's configuration files."
msgstr ""

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying default policy (%s)"
msgstr ""

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying default policy (%s) "
"for printer %s"
msgstr ""

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"default policy (%s)"
msgstr ""

#, python-format
msgid ""
"Printer %s still not registered in the PyKota system, job will be rejected"
msgstr ""

#, python-format
msgid ""
"User %s still not registered in the PyKota system, job will be rejected on "
"printer %s"
msgstr ""

#, python-format
msgid ""
"User %s still doesn't have quota on printer %s in the PyKota system, job "
"will be rejected"
msgstr ""

#, python-format
msgid ""
"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
"double check /etc/pykota/pykota.conf : %s"
msgstr ""

#, python-format
msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
msgstr ""

#, python-format
msgid "Problem adding LDAP entry (%s, %s)"
msgstr ""

#, python-format
msgid "Problem deleting LDAP entry (%s)"
msgstr ""

#, python-format
msgid "Problem modifying LDAP entry (%s, %s)"
msgstr ""

#, python-format
msgid ""
"No pykotaAccountBalance object found for user %s. Did you create LDAP "
"entries manually ?"
msgstr ""

#, python-format
msgid ""
"Unable to find an existing objectClass %s entry with %s=%s to attach "
"pykotaAccount objectClass"
msgstr ""

#, python-format
msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
msgstr ""

msgid "Totals may be inaccurate if some users are members of several groups."
msgstr ""

#, python-format
msgid "Network error while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "Problem encountered while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "Waiting for printer %s to be idle or printing..."
msgstr ""

#, python-format
msgid "Waiting for printer %s's idle status to stabilize..."
msgstr ""

#, python-format
msgid "Problem during connection to %s:%s : %s"
msgstr ""

#, python-format
msgid "Problem while sending PJL query to %s:%s : %s"
msgstr ""

#, python-format
msgid "A problem occured while reading printer %s's internal page counter."
msgstr ""

#, python-format
msgid "Retrieving printer %s's page counter from database instead."
msgstr ""

#, python-format
msgid ""
"Couldn't retrieve printer %s's internal page counter either before or after "
"printing."
msgstr ""

#, python-format
msgid "Job's size forced to 1 page for printer %s."
msgstr ""

#, python-format
msgid "No previous job in database for printer %s."
msgstr ""

#, python-format
msgid "Inconsistent values for printer %s's internal page counter."
msgstr ""

msgid ""
"Internal SNMP accounting asked, but Python-SNMP is not available. Please "
"download it from http://pysnmp.sourceforge.net"
msgstr ""

#, python-format
msgid "Unknown printer address in HARDWARE(%s) for printer %s"
msgstr ""

#, python-format
msgid "Launching HARDWARE(%s)..."
msgstr ""

#, python-format
msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
msgstr ""

#, python-format
msgid "Line [%s] skipped in accounter's output. Trying again..."
msgstr ""

#, python-format
msgid "Hardware accounter %s exit code is %s"
msgstr ""

#, python-format
msgid "Unable to query printer %s via HARDWARE(%s)"
msgstr ""

#, python-format
msgid ""
"SNMP querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid ""
"PJL querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid "Launching SOFTWARE(%s)..."
msgstr ""

#, python-format
msgid "Unable to compute job size with accounter %s"
msgstr ""

#, python-format
msgid "Problem while waiting for software accounter pid %s to exit : %s"
msgstr ""

#, python-format
msgid "Software accounter %s exit code is %s"
msgstr ""

msgid "PyKota Reports"
msgstr ""

msgid "Report"
msgstr ""

msgid "User / Group names mask"
msgstr ""

msgid "Groups report"
msgstr ""

msgid "History"
msgstr ""

msgid "Empty"
msgstr ""

msgid "Date"
msgstr ""

msgid "Action"
msgstr ""

msgid "User"
msgstr ""

msgid "Printer"
msgstr ""

msgid "Hostname"
msgstr ""

msgid "JobId"
msgstr ""

msgid "JobSize"
msgstr ""

msgid "JobPrice"
msgstr ""

msgid "Copies"
msgstr ""

msgid "JobBytes"
msgstr ""

msgid "PageCounter"
msgstr ""

msgid "Title"
msgstr ""

msgid "Filename"
msgstr ""

msgid "Options"
msgstr ""

msgid "Previous page"
msgstr ""