root / pykota / trunk / po / pt / pykota.po @ 3238

# PyKota
#
# PyKota : Print Quotas for CUPS and LPRng
#
# (c) 2003, 2004, 2005, 2006, 2007 Jerome Alet <alet@librelogiciel.com>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# $Id$
#
#
msgid ""
msgstr ""
"Project-Id-Version: PyKota v1.20\n"
"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
"POT-Creation-Date: 2006-03-30 22:00+0200\n"
"PO-Revision-Date: 2004-01-15 13:02+0100\n"
"Last-Translator: Jerome Alet <alet@librelogiciel.com>\n"
"Language-Team: Portugues <alet@librelogiciel.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"

#
# NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY
#
msgid "ALLOW"
msgstr ""

msgid "DENY"
msgstr ""

msgid "CANCEL"
msgstr ""

msgid "PROBLEM"
msgstr ""

msgid "REFUND"
msgstr ""

#, python-format
msgid ""
"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A tool to automate user account creation and initial balance setting.\n"
"\n"
"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
"\n"
"command line usage :\n"
"\n"
"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
"  OF AN external policy IN pykota.conf\n"
"  \n"
"  autopykota { -i | --initbalance value } \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints autopykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
"                       If the user already exists, actual balance is left\n"
"                       unmodified. If unset, the default value is 0.\n"
"\n"
"  -e | --email addr    Sets the user's e-mail address.\n"
"  \n"
msgstr ""

#, python-format
msgid "SIGTERM received, job %s cancelled."
msgstr "SIGTERM recebido, trabalho %s reiniciado."

#, python-format
msgid "Network error while querying the CUPS server : %s"
msgstr ""

msgid "You are not allowed to print at this time."
msgstr ""

msgid "Print job cancelled."
msgstr ""

msgid "Unlimited"
msgstr ""

msgid "ON"
msgstr ""

msgid "OFF"
msgstr ""

#, python-format
msgid "Banner generator %s exit code is %s"
msgstr ""

msgid "Banner won't be printed : maximum number of deny banners reached."
msgstr ""

#, python-format
msgid "Beware : computed job size (%s) != precomputed job size (%s)"
msgstr ""

msgid ""
"The job size will be trusted anyway according to the 'trustjobsize' directive"
msgstr ""

#, python-format
msgid ""
"The job size will be trusted because it is inferior to the 'trustjobsize' "
"directive's limit %s"
msgstr ""

#, python-format
msgid ""
"The job size will be modified according to the 'trustjobsize' directive : %s"
msgstr ""

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying external policy (%"
"s) for printer %s"
msgstr ""
"Impressora %s n�registada no sistema de impress� foi aplicada a pol�ca "
"externa (%s) para a impressora %s"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying external policy (%s) "
"for printer %s"
msgstr ""
"Utilizador %s n�registado no sistema de impress� foi aplicada a pol�ca "
"externa (%s) para a impressora %s"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"external policy (%s) for printer %s"
msgstr ""
"Utilizador %s n�tem cota na impressora %s, foi aplicada a pol�ca externa "
"(%s) para a impressora %s"

#, python-format
msgid ""
"External policy %s for printer %s produced an error. Job rejected. Please "
"check PyKota's configuration files."
msgstr ""
"Pol�ca externa %s para a impressora %s devolveu um erro. Trabalho "
"reiniciado. Por favor verifique os ficheiros de configura� do Pykota."

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying default policy (%s)"
msgstr ""
"Impressora %s n�registada no sistema Pykota, foi aplicada por omiss�a "
"pol�ca (%s)"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying default policy (%s) "
"for printer %s"
msgstr ""
"Utilizador %s n�registrado no sistema PyKota, foi aplicada por omiss�a "
"pol�ca (%s)para a impressora %s"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"default policy (%s)"
msgstr ""
"O utilizador %s n�tem cota na impressora %s, foi aplicada por omiss�a "
"pol�ca (%s)"

#, python-format
msgid ""
"Printer %s still not registered in the PyKota system, job will be rejected"
msgstr ""
"A Impressora %s n�se encontra registada no sistema, o pedido ser�ejeitado"

#, python-format
msgid ""
"User %s still not registered in the PyKota system, job will be rejected on "
"printer %s"
msgstr ""
"O utilizador %s n�se encontra registado no sistema, o pedido para a "
"impressora %sser�ejeitado"

#, python-format
msgid ""
"User %s still doesn't have quota on printer %s in the PyKota system, job "
"will be rejected"
msgstr ""
"O utilizador %s ainda n�tem cota definida na impressora %s, o pedido ser�
"rejeitado"

msgid "Job is a dupe"
msgstr ""

msgid "Printing is denied by configuration"
msgstr ""

#, python-format
msgid "Duplicate print jobs are not allowed on printer %s."
msgstr ""

msgid "Subprocess denied printing of a dupe"
msgstr ""

#, python-format
msgid "Duplicate print jobs are not allowed on printer %s at this time."
msgstr ""

msgid "Subprocess allowed printing of a dupe"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""

#, python-format
msgid "Impossible to connect to SMTP server : %s"
msgstr "N�foi poss�l conectar-se ao servidor SMTP %s"

msgid "Print Quota"
msgstr "Cota de Impress�

#, python-format
msgid "Impossible to send mail to %s, error %s : %s"
msgstr "Imposs�l enviar email para  %s, erro %s : %s"

#, python-format
msgid "Problem when sending mail : %s"
msgstr ""

msgid "Job contains no data. Printing is denied."
msgstr "Tarefa n�cont�nenhum dado. Impress�negada"

msgid "Error in external policy script. Printing is denied."
msgstr ""

#, python-format
msgid ""
"Still no print quota entry for user %s on printer %s after external policy. "
"Printing is denied."
msgstr ""

msgid "Printing is denied by printer policy."
msgstr ""

msgid "Job allowed by printer policy. No accounting will be done."
msgstr ""

#, python-format
msgid "Invalid policy %s for printer %s"
msgstr "Pol�ca %s inv�da para a impressora %s"

#, python-format
msgid "Precomputed job size (%s pages) too large for printer %s."
msgstr ""

#, python-format
msgid "You are not allowed to print so many pages on printer %s at this time."
msgstr ""

#, python-format
msgid "User %s is not allowed to print at this time."
msgstr ""

msgid "Your account settings forbid you to print at this time."
msgstr ""

#, python-format
msgid "Print Quota exceeded for user %s on printer %s"
msgstr "Cota de impress�excedida para o utilizador %s na impressora %s"

#, python-format
msgid "Print Quota low for user %s on printer %s"
msgstr "Cota de impress�baixa para o utilizador %s na impressora %s"

msgid "Job denied, no accounting will be done."
msgstr ""

msgid "Job cancelled, no accounting will be done."
msgstr ""

msgid "Job accounting begins."
msgstr "In�o da contagem da tarefa."

msgid "Job denied, no accounting has been done."
msgstr ""

msgid "Job cancelled, no accounting has been done."
msgstr ""

msgid "Job accounting ends."
msgstr "Fim da contagem da tarefa."

msgid ""
"Job size forced to 0 because the real CUPS backend failed. No accounting "
"will be done."
msgstr ""

msgid "The real CUPS backend failed, but the job will be accounted for anyway."
msgstr ""

msgid "Job size forced to 0 because printing is denied."
msgstr "Tamanho da tarefa zerado porque a impress�foi negada"

msgid "Job size forced to 0 because printing was cancelled."
msgstr ""

#, python-format
msgid "Job size : %i"
msgstr "Tamanho da tarefa : %i"

#, python-format
msgid "User %s's quota on printer %s won't be modified"
msgstr ""

#, python-format
msgid "Updating user %s's quota on printer %s"
msgstr "Atualizando cota do usu�o %s para a impressora %s"

msgid "Job added to history."
msgstr "Tarefa adicionada ao hist�o"

#, python-format
msgid "Billing code %s was updated."
msgstr ""

#, python-format
msgid "Incorrect value for the 'onbackenderror' directive in section [%s]"
msgstr ""

#, python-format
msgid "The real backend produced an error, we will try again in %s seconds."
msgstr ""

#, python-format
msgid "Job %s interrupted by the administrator !"
msgstr ""

#, python-format
msgid ""
"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Dumps PyKota database's content.\n"
"\n"
"command line usage :\n"
"\n"
"  dumpykota [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints dumpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
"                       \n"
"                         - history : dumps the jobs history.\n"
"                         - users : dumps users.\n"
"                         - groups : dumps user groups.\n"
"                         - printers : dump printers.\n"
"                         - upquotas : dump user quotas.\n"
"                         - gpquotas : dump user groups quotas.\n"
"                         - payments : dumps user payments.\n"
"                         - pmembers : dumps printer groups members.\n"
"                         - umembers : dumps user groups members.\n"
"                         - billingcodes : dumps billing codes.\n"
"                         - all : dumps all PyKota datas. The output format\n"
"                                 is always XML in this case.\n"
"                         \n"
"                       NB : the -d | --data command line option   \n"
"                       is MANDATORY.\n"
"  \n"
"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
"                       the format is to dump datas in the csv format (comma\n"
"                       separated values). All data dumped is between double\n"
"                       quotes. Allowed formats are :\n"
"                       \n"
"                         - csv : separate datas with commas\n"
"                         - ssv : separate datas with semicolons\n"
"                         - tsv : separate datas with tabs\n"
"                         - xml : dump data as XML \n"
"                         - cups : dump datas in CUPS' page_log format :\n"
"                                  ONLY AVAILABLE WITH --data history\n"
"                         \n"
"  -o | --output fname  All datas will be dumped to the file instead of\n"
"                       to the standard output. The special '-' filename\n"
"                       is the default value and means stdout.\n"
"                       WARNING : existing files are truncated !\n"
"\n"
"  -O | --orderby exp   Change the ordering or result. 'exp' is a comma\n"
"                       separated list of ordering statements, for example\n"
"                       '--orderby +username,-printername'. Not all "
"expression\n"
"                       values are meaningful, so using this command line \n"
"                       switch is not recommanded if you don't know the \n"
"                       exact layout of PyKota's database schema.\n"
"                       \n"
"  -s | --sum           Summarize the selected datas.\n"
"                           ONLY AVAILABLE WITH --data history or payments\n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         groupname      Users group's name\n"
"         printername    Printer's name\n"
"         pgroupname     Printers group's name\n"
"         hostname       Client's hostname\n"
"         jobid          Job's Id\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Dates formatting with 'start' and 'end' filter keys :\n"
"  \n"
"    YYYY : year boundaries\n"
"    YYYYMM : month boundaries\n"
"    YYYYMMDD : day boundaries\n"
"    YYYYMMDDhh : hour boundaries\n"
"    YYYYMMDDhhmm : minute boundaries\n"
"    YYYYMMDDhhmmss : second boundaries\n"
"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
"15)\n"
"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
"\n"
"  'now' and 'today' are not exactly the same since today represents the "
"first\n"
"  or last second of the day depending on if it's used in a start= or end=\n"
"  date expression. The utility to be able to specify dates in the future is\n"
"  a question which remains to be answered :-)\n"
"  \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"  NB : not all keys are allowed for each data type, so the result may be \n"
"  empty if you use a key not available for a particular data type.\n"
"  \n"
"Examples :\n"
"\n"
"  $ dumpykota --data history --format csv >myfile.csv\n"
"  \n"
"  This dumps the history in a comma separated values file, for possible\n"
"  use in a spreadsheet.\n"
"  \n"
"  $ dumpykota --data users --format xml -o users.xml\n"
"  \n"
"  Dumps all users datas to the users.xml file.\n"
"  \n"
"  $ dumpykota --data history printername=HP2100 username=jerome\n"
"  \n"
"  Dumps the job history for user jerome on printer HP2100 only.\n"
"  \n"
"  $ dumpykota --data history start=200503 end=20050730234615\n"
"  \n"
"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
msgstr ""

msgid "The -d | --data command line option is mandatory, see help."
msgstr ""

#, python-format
msgid ""
"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A Print Quota editor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  edpykota [options] user1 user2 ... userN\n"
"  \n"
"  edpykota [options] group1 group2 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users or groups print quota entries if\n"
"                       they don't exist in database.\n"
"                       \n"
"  -d | --delete        Deletes users or groups print quota entries.\n"
"                       Users or groups are never deleted, you have\n"
"                       to use the pkusers command to delete them.\n"
"                       The history will be purge from all matching\n"
"                       jobs, unless -g | --groups is used.\n"
"  \n"
"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers. \n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"  -g | --groups        Edit groups print quota entries instead of \n"
"                       users print quota entries.\n"
"                          \n"
"  -L | --list          Lists users or groups print quota entries.\n"
"  \n"
"  -n | --noquota       Sets both soft and hard limits to None for users\n"
"                       or groups print quota entries.\n"
"  \n"
"  -r | --reset         Resets the actual page counter for the user\n"
"                       or group to zero on the specified printers. \n"
"                       The life time page counter is kept unchanged.\n"
"                       \n"
"  -R | --hardreset     Resets the actual and life time page counters\n"
"                       for the user or group to zero on the specified \n"
"                       printers. This is a shortcut for '--used 0'.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       edpykota to not modify existing print quota entries.\n"
"                       \n"
"  -S | --softlimit sl  Sets the quota soft limit to sl "
"pages.                       \n"
"  \n"
"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
"  \n"
"  -I | --increase v    Increase existing Soft and Hard limits by the value\n"
"                       of v. You can prefix v with + or -, if no sign is\n"
"                       used, + is assumed.\n"
"\n"
"  -U | --used u        Sets the page counters for the user u pages on\n"
"                       the selected printers. Doesn't work for groups, "
"since\n"
"                       their page counters are the sum of all their "
"members'\n"
"                       page counters.\n"
"                       Useful for migrating users from a different system\n"
"                       where they have already used some pages. Actual\n"
"                       and Life Time page counters may be increased or "
"decreased\n"
"                       if u is prefixed with + or -.\n"
"                       WARNING : BOTH page counters are modified in all "
"cases,\n"
"                       so be careful.\n"
"                       NB : if u equals '0', then the action taken is\n"
"                       the same as if --hardreset was used.\n"
"\n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ edpykota --add john paul george ringo\n"
"  \n"
"  This will create print quota entries for users john, paul, george\n"
"  and ringo on all printers. These print quota entries will have no\n"
"  limit set.\n"
"  \n"
"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
"  \n"
"  This will set jerome's print quota on the lp printer to a soft limit\n"
"  of 50 pages, and a hard limit of 60 pages. Both user jerome and\n"
"  printer lp have been previously created with the pkusers and pkprinters\n"
"  commands, respectively.\n"
"\n"
"  $ edpykota -g -S 500 -H 550 financial support            \n"
"  \n"
"  This will set print quota soft limit to 500 pages and hard limit\n"
"  to 550 pages for groups financial and support on all printers.\n"
"  \n"
"  $ edpykota --reset jerome \"jo*\"\n"
"  \n"
"  This will reset jerome's page counter to zero on all printers, as\n"
"  well as every user whose name begins with 'jo'.\n"
"  Their life time page counter on each printer will be kept unchanged.\n"
"  You can also reset the life time page counters by using the\n"
"  --hardreset | -R command line option.\n"
"  \n"
"  $ edpykota --printer hpcolor --noquota jerome\n"
"  \n"
"  This will tell PyKota to not limit jerome when printing on the \n"
"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
"  accounting of the pages he prints will still be kept.\n"
"  Print Quotas for jerome on other printers are unchanged.\n"
"  \n"
"  $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n"
"  \n"
"  This will delete users jerome and rachel's print quota\n"
"  entries on all printers which name begin with 'HP' or\n"
"  'XER'. The jobs printed by these users on these printers\n"
"  will be deleted from the history.\n"
msgstr ""

#, python-format
msgid "You can't set negative limits for %s"
msgstr ""

msgid "Extracting datas"
msgstr ""

#, python-format
msgid "Page counter : %s"
msgstr ""

#, python-format
msgid "Lifetime page counter : %s"
msgstr ""

#, python-format
msgid "Soft limit : %s"
msgstr ""

#, python-format
msgid "Hard limit : %s"
msgstr ""

#, python-format
msgid "Date limit : %s"
msgstr ""

#, python-format
msgid "Maximum job size : %s"
msgstr ""

#, python-format
msgid "%s pages"
msgstr ""

#, python-format
msgid "Warning banners printed : %s"
msgstr ""

msgid "Deletion"
msgstr ""

#, python-format
msgid "Invalid used value %s."
msgstr ""

#, python-format
msgid "Invalid increase value %s."
msgstr ""

#, python-format
msgid "Invalid softlimit value %s."
msgstr "Valor incorrecto para o limite m�mo %s."

#, python-format
msgid "Invalid hardlimit value %s."
msgstr "Valor incorrecto para limite m�mo %s."

#, python-format
msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
msgstr ""
"Limite m�mo %i �enor que o limite m�mo %i, os valores ser�invertidos."

#, python-format
msgid "Undefined hard limit set to soft limit (%s)."
msgstr ""

#, python-format
msgid "Undefined soft limit set to hard limit (%s)."
msgstr ""

msgid "Creation"
msgstr ""

#, python-format
msgid "No entry matches %s. Please use pkusers to create them first."
msgstr ""

msgid "Modification"
msgstr ""

msgid "incompatible options, see help."
msgstr "Op�s incompat�is, veja a ajuda."

msgid "You have to pass user or group names on the command line"
msgstr ""
"�Obrigat� a utiliza� de nomes de utilizador ou grupo na linha de "
"comando"

#, python-format
msgid ""
"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Generates print quota reports.\n"
"\n"
"command line usage :\n"
"\n"
"  repykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints repykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Generates a report on users quota, this is \n"
"                       the default.\n"
"  \n"
"  -g | --groups        Generates a report on group quota instead of users.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Only lists users who are members of these\n"
"                              groups. Reserved to PyKota Administrators.\n"
"  \n"
"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ repykota --printer lp\n"
"  \n"
"  This will print the quota status for all users who use the lp printer.\n"
"\n"
"  $ repykota \n"
"  \n"
"  This will print the quota status for all users on all printers.\n"
"  \n"
"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
"  \n"
"  This will print the quota status for user jerome and all users\n"
"  whose name begins with \"jo\" on all printers which name begins\n"
"  with \"laser\" or ends with \"pson\".\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
msgstr ""

msgid "Option --ingroups is reserved to PyKota Administrators."
msgstr ""

#, python-format
msgid "There's no printer matching %s"
msgstr "A impressora %s n�existe"

#, python-format
msgid ""
"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Sends mail to users over print quota.\n"
"\n"
"command line usage :\n"
"\n"
"  warnpykota  [options]  [names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints warnpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Warns users over their print quota, this is the \n"
"                       default.\n"
"  \n"
"  -g | --groups        Warns users whose groups quota are over limit.\n"
"  \n"
"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ warnpykota --printer lp\n"
"  \n"
"  This will warn all users of the lp printer who have exceeded their\n"
"  print quota.\n"
"\n"
"  $ warnpykota \n"
"  \n"
"  This will warn all users  who have exceeded their print quota on\n"
"  any printer.\n"
"\n"
"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
"  \n"
"  This will warn all users of groups which names begins with \"dev\" and\n"
"  who have exceeded their print quota on any printer which name begins \n"
"  with \"laserjet\"\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
msgstr ""

#, python-format
msgid ""
"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Generates banners.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbanner  [options]  [more info]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbanner's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"                       \n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"  \n"
"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
"                       used to save toner. The default value is 0, which\n"
"                       means that no toner saving will be done.\n"
"  \n"
"  -u | --url u         Uses u as an url to be written at the bottom of \n"
"                       the banner page. The default url is :\n"
"                       http://www.pykota.com/\n"
"  \n"
"examples :                              \n"
"\n"
"  Using pkbanner directly from the command line is not recommended,\n"
"  excepted for testing purposes. You should use pkbanner in the\n"
"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
"  \n"
"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
"  \n"
"      With such a setting in pykota.conf, all print jobs will be \n"
"      prefixed with an A4 banner with no logo, and text luminosity will\n"
"      be increased by 75%%. The PostScript output will be directly sent\n"
"      to your printer.\n"
"      \n"
"  You'll find more examples in the sample configuration file included    \n"
"  in PyKota.\n"
msgstr ""

msgid "Unknown"
msgstr ""

msgid "Username"
msgstr ""

msgid "More Info"
msgstr ""

msgid "Job"
msgstr ""

msgid "Date"
msgstr "Data"

msgid "Allowed"
msgstr ""

msgid "Denied"
msgstr ""

msgid "Allowed with Warning"
msgstr ""

msgid "Problem"
msgstr ""

msgid "Cancelled"
msgstr ""

msgid "Result"
msgstr ""

msgid "Title"
msgstr "T�lo"

msgid "Filename"
msgstr "Nome do arquivo"

#, python-format
msgid "Pages printed so far on %s"
msgstr ""

msgid "Account balance"
msgstr ""

msgid "Soft Limit"
msgstr ""

msgid "Hard Limit"
msgstr ""

msgid "Date Limit"
msgstr ""

msgid "No Limit"
msgstr ""

msgid "No Accounting"
msgstr ""

msgid "Forbidden"
msgstr ""

msgid "Printing Mode"
msgstr ""

msgid "Allowed range is (0..99)"
msgstr ""

#, python-format
msgid "Invalid 'savetoner' option %s : %s"
msgstr ""

#, python-format
msgid "Invalid 'pagesize' option %s, defaulting to A4."
msgstr ""

#, python-format
msgid ""
"pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A billing codes Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbcodes [options] code1 code2 code3 ... codeN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbcodes version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds billing codes if they don't exist in PyKota's\n"
"                       database. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"\n"
"  -d | --delete        Deletes billing codes from PyKota's database.\n"
"                       NB : the history entries with this billing code\n"
"                       are not deleted, voluntarily.\n"
"\n"
"  -D | --description d Adds a textual description to billing codes.\n"
"\n"
"  -l | --list          List informations about the billing codes.\n"
"\n"
"  -r | --reset         Resets the billing codes' balance and page counters\n"
"                       to 0.\n"
"\n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkbcodes to not modify existing billing codes.\n"
"\n"
"  code1 through codeN can contain wildcards if the --add option\n"
"  is not set.\n"
"\n"
"examples :                              \n"
"\n"
"  $ pkbcodes --add -D \"My project\" myproj\n"
"\n"
"  Will create the myproj billing code with \"My project\"\n"
"  as the description.\n"
"\n"
"  $ pkbcodes --delete \"*\"\n"
"\n"
"  This will completely delete all the billing codes, but without\n"
"  removing any matching job from the history. USE WITH CARE ANYWAY !\n"
"  \n"
"  $ pkbcodes --list \"my*\"\n"
"  \n"
"  This will list all billing codes which name begins with 'my'.\n"
msgstr ""

msgid "You're not allowed to use this command."
msgstr ""

#, python-format
msgid "There's no billingcode matching %s"
msgstr ""

msgid "pages"
msgstr ""

msgid "and"
msgstr ""

msgid "credits"
msgstr ""

#, python-format
msgid "Billing code [%s] already exists, skipping."
msgstr ""

#, python-format
msgid "Billing code [%s] already exists, will be modified."
msgstr ""

msgid "You have to pass billing codes on the command line"
msgstr ""

#, python-format
msgid ""
"pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An invoice generator for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkinvoice [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkinvoice's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -l | --logo img      Use the image as the invoice's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"                       \n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"                       \n"
"  -n | --number N      Sets the number of the first invoice. This number\n"
"                       will automatically be incremented for each invoice.\n"
"                       \n"
"  -o | --output f.pdf  Defines the name of the invoice file which will\n"
"                       be generated as a PDF document. If not set or\n"
"                       set to '-', the PDF document is sent to standard\n"
"                       output. \n"
"                       \n"
"  -u | --unit u        Defines the name of the unit to use on the "
"invoice.                       \n"
"                       The default unit is 'Credits', optionally translated\n"
"                       to your native language if it is supported by "
"PyKota.\n"
"  \n"
"  -V | --vat p         Sets the percent value of the applicable VAT to be\n"
"                       exposed. The default is 0.0, meaning no VAT\n"
"                       information will be included.\n"
"  \n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         printername    Printer's name\n"
"         hostname       Client's hostname\n"
"         jobid          Job's Id\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Dates formatting with 'start' and 'end' filter keys :\n"
"  \n"
"    YYYY : year boundaries\n"
"    YYYYMM : month boundaries\n"
"    YYYYMMDD : day boundaries\n"
"    YYYYMMDDhh : hour boundaries\n"
"    YYYYMMDDhhmm : minute boundaries\n"
"    YYYYMMDDhhmmss : second boundaries\n"
"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
"15)\n"
"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
"\n"
"  'now' and 'today' are not exactly the same since today represents the "
"first\n"
"  or last second of the day depending on if it's used in a start= or end=\n"
"  date expression. The utility to be able to specify dates in the future is\n"
"  a question which remains to be answered :-)\n"
"  \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"examples :\n"
"\n"
"  $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n"
"  \n"
"  Will generate a PDF document containing invoices for all users\n"
"  who have spent some credits last month. Invoices will be done in\n"
"  EURO.  No VAT information will be included.\n"
msgstr ""

msgid "Invoice"
msgstr ""

msgid "Edited on"
msgstr ""

msgid "Number of jobs printed"
msgstr ""

msgid "Number of pages printed"
msgstr ""

msgid "Amount due"
msgstr ""

msgid "Included VAT"
msgstr ""

msgid "Here's the invoice for your printouts"
msgstr ""

msgid "Generating invoices"
msgstr ""

#, python-format
msgid "Incorrect value '%s' for the --vat command line option"
msgstr ""

#, python-format
msgid "Incorrect value '%s' for the --number command line option"
msgstr ""

#, python-format
msgid "Invalid filter value [%s], see help."
msgstr ""

#, python-format
msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits"
msgstr ""

msgid "Credits"
msgstr ""

#, python-format
msgid ""
"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Email gateway for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkmail  [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkmail's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"    \n"
"  This command is meant to be used from your mail server's aliases file,\n"
"  as a pipe. It will then accept commands send to it in email messages,\n"
"  and will send the answer to the command's originator.\n"
"  \n"
"  To use this command, create an email alias in /etc/aliases with\n"
"  the following format :\n"
"  \n"
"    pykotacmd: \"|/usr/bin/pkmail\"\n"
"    \n"
"  Then run the 'newaliases' command to regenerate the aliases database.\n"
"  \n"
"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
"  the command in the subject.\n"
"  \n"
"  List of supported commands :\n"
"  \n"
"        report [username]\n"
"  \n"
"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
"  system user in the 'pykota' system group to ensure this user can\n"
"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
"  that you think at least twice before doing this though.\n"
"  \n"
"  Use at your own risk !\n"
msgstr ""

msgid "Result of your commands"
msgstr ""

#, python-format
msgid ""
"pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Notifies or ask questions to end users who launched the PyKotIcon "
"application.\n"
"\n"
"command line usage :\n"
"\n"
"  pknotify  [options]  [arguments]\n"
"\n"
"options :\n"
"\n"
"  -v | --version             Prints pknotify's version number then exits.\n"
"  -h | --help                Prints this message then exits.\n"
"  \n"
"  -d | --destination h[:p]   Sets the destination hostname and optional\n"
"                             port onto which contact the remote PyKotIcon\n"
"                             application. This option is mandatory.\n"
"                             When not specified, the port defaults to 7654.\n"
"                             \n"
"  -a | --ask                 Tells pknotify to ask something to the end\n"
"                             user. Then pknotify will output the result.\n"
"                       \n"
"  -C | --checkauth           When --ask is used and both an 'username' and "
"a\n"
"                             'password' are asked to the end user, then\n"
"                             pknotify will try to authenticate the user\n"
"                             through PAM. If authentified, this program\n"
"                             will print \"AUTH=YES\", else \"AUTH=NO\".\n"
"                             If a field is missing, \"AUTH=IMPOSSIBLE\" "
"will\n"
"                             be printed. If the user is authenticated, then\n"
"                             \"USERNAME=xxxx\" will be printed as well.\n"
"                             \n"
"  -c | --confirm             Tells pknotify to ask for either a "
"confirmation                       \n"
"                             or abortion.\n"
"                             \n"
"  -D | --denyafter N         With --checkauth above, makes pknotify "
"loop                           \n"
"                             up to N times if the password is incorrect.\n"
"                             After having reached the limit, \"DENY\" will\n"
"                             be printed, which effectively rejects the job.\n"
"                             The default value of N is 1, meaning the job\n"
"                             is denied after the first unsuccessful try.\n"
"                             \n"
"  -N | --noremote action     If it's impossible to connect to the remote\n"
"                             PyKotIcon machine, do this action instead.\n"
"                             Allowed actions are 'CONTINUE' and 'CANCEL', \n"
"                             which will respectively allow the processing\n"
"                             of the print job to continue, or the job to\n"
"                             be cancelled. The default value is CANCEL.\n"
"                             \n"
"  -n | --notify              Tells pknotify to send an informational "
"message\n"
"                             to the end user.\n"
"                             \n"
"  -q | --quit                Tells pknotify to send a message asking the\n"
"                             PyKotIcon application to exit. This option can\n"
"                             be combined with the other ones to make "
"PyKotIcon\n"
"                             exit after having sent the answer from the "
"dialog.\n"
"                             \n"
"  -t | --timeout T           Tells pknotify to ignore the end user's answer "
"if\n"
"                             it comes past T seconds after the dialog box "
"being\n"
"                             opened. The default value is 0 seconds, which \n"
"                             tells pknotify to wait indefinitely.\n"
"                             Use this option to avoid having an user who\n"
"                             leaved his computer stall a whole print queue.\n"
"                             \n"
"  You MUST specify either --ask, --confirm, --notify or --quit.\n"
"\n"
"  arguments :             \n"
"  \n"
"    -a | --ask : Several arguments are accepted, of the form\n"
"                 \"label:varname:defaultvalue\". The result will\n"
"                 be printed to stdout in the following format :\n"
"                 VAR1NAME=VAR1VALUE\n"
"                 VAR2NAME=VAR2VALUE\n"
"                 ...\n"
"                 If the dialog was cancelled, nothing will be\n"
"                 printed. If one of the varname is 'password'\n"
"                 then this field is asked as a password (you won't\n"
"                 see what you type in), and is NOT printed. Although\n"
"                 it is not printed, it will be used to check if\n"
"                 authentication is valid if you specify --checkauth.\n"
"                 \n"
"    -c | --confirm : A single argument is expected, representing the\n"
"                     message to display. If the dialog is confirmed\n"
"                     then pknotify will print OK, else CANCEL.\n"
"                     \n"
"    -n | --notify : A single argument is expected, representing "
"the                 \n"
"                    message to display. In this case pknotify will\n"
"                    always print OK.\n"
"                    \n"
"examples :                    \n"
"\n"
"  pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 "
"credits\"\n"
"  \n"
"  Would display the cost of the print job and asks for confirmation.\n"
"  If the end user doesn't have PyKotIcon running and accepting connections\n"
"  from the print server, PyKota will consider that the end user accepted\n"
"  to print this job.\n"
"  \n"
"  pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n"
"           --checkauth --ask \"Your name:username:\" \"Your password:"
"password:\"\n"
"           \n"
"  Asks an username and password, and checks if they are valid.         \n"
"  NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n"
"  only set if you launch pknotify from cupspykota through a directive\n"
"  in ~pykota/pykota.conf\n"
"  \n"
"  The TCP port you'll use must be reachable on the client from the\n"
"  print server.\n"
msgstr ""

msgid "You MUST install PyPAM for this functionnality to work !"
msgstr ""

#, python-format
msgid "Authentication error for user %s : %s"
msgstr ""

#, python-format
msgid "Internal error : can't authenticate user %s"
msgstr ""

#, python-format
msgid "Password correct for user %s"
msgstr ""

#, python-format
msgid ""
"The end user at %s:%i didn't answer within %i seconds. The print job will be "
"cancelled."
msgstr ""

#, python-format
msgid ""
"Are you sure that PyKotIcon is running and accepting incoming connections on "
"%s:%s ?"
msgstr ""

msgid "Connection error"
msgstr ""

msgid "some options are mandatory, see help."
msgstr ""

msgid "incorrect value for the --noremote command line switch, see help."
msgstr ""

msgid "some options require arguments, see help."
msgstr ""

#, python-format
msgid ""
"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A Printers Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds printers if they don't exist on the Quota \n"
"                       Storage Server. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes printers from the quota storage.\n"
"  \n"
"  -D | --description d Adds a textual description to printers.\n"
"\n"
"  -C | --cups          Also modifies the DeviceURI in CUPS' printers.conf\n"
"\n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
"                       Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point and negative values are allowed.\n"
"  \n"
"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
"                       groups pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"                       If the --remove option below is not used, the \n"
"                       default action is to add printers to the specified\n"
"                       printer groups.\n"
"                       \n"
"  -l | --list          List informations about the printer(s) and the\n"
"                       printers groups it is a member of.\n"
"                       \n"
"  -r | --remove        In combination with the --groups option "
"above,                       \n"
"                       remove printers from the specified printers groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkprinters to not modify existing printers.\n"
"                       \n"
"  -m | --maxjobsize s  Sets the maximum job size allowed on the printer\n"
"                       to s pages.\n"
"                       \n"
"  -p | --passthrough   Activate passthrough mode for the printer. In this\n"
"                       mode, users are allowed to print without any impact\n"
"                       on their quota or account balance.\n"
"                       \n"
"  -n | --nopassthrough Deactivate passthrough mode for the printer.\n"
"                       Without -p or -n, printers are created in \n"
"                       normal mode, i.e. no passthrough.\n"
"  \n"
"  printer1 through printerN can contain wildcards if the --add option \n"
"  is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
"hp8000\n"
"  \n"
"  Will create three printers named hp2100, hp2200 and hp8000.\n"
"  Their price per page will be set at 0.05 unit, and their price\n"
"  per job will be set at 0.1 unit. Units are in your own currency,\n"
"  or whatever you want them to mean.\n"
"  All of their descriptions will be set to the string \"HP Printer\".\n"
"  If any of these printers already exists, it will also be modified \n"
"  unless the -s|--skipexisting command line option is also used.\n"
"            \n"
"  $ pkprinters --delete \"*\"\n"
"  \n"
"  This will completely delete all printers and associated quota "
"information,\n"
"  as well as their job history. USE WITH CARE !\n"
"  \n"
"  $ pkprinters --groups Laser,HP \"hp*\"\n"
"  \n"
"  This will put all printers which name matches \"hp*\" into printers "
"groups \n"
"  Laser and HP, which MUST already exist.\n"
"  \n"
"  $ pkprinters --groups LexMark --remove hp2200\n"
"  \n"
"  This will remove the hp2200 printer from the LexMark printer group.\n"
msgstr ""

#, python-format
msgid "Passthrough mode : %s"
msgstr ""

#, python-format
msgid "Routed through PyKota : %s"
msgstr ""

msgid "YES"
msgstr ""

msgid "NO"
msgstr ""

msgid "in"
msgstr "em"

msgid "Rerouting printers to CUPS"
msgstr ""

#, python-format
msgid "Invalid charge amount value %s"
msgstr "Valor de custo inv�do %s"

#, python-format
msgid "Invalid maximum job size value %s"
msgstr ""

#, python-format
msgid "Printer %s already exists, skipping."
msgstr "Impressora %s j�xiste. Ignorando."

#, python-format
msgid "Printer %s already exists, will be modified."
msgstr "Impressora %s j�xiste. Ser�eita uma modifica�."

#, python-format
msgid "Invalid printer name %s"
msgstr "Nome de impressora %s inv�do"

msgid "You have to pass printer groups names on the command line"
msgstr ""
"voc�eve passar os nomes dos grupos de impressoras na linha de comando"

msgid "You have to pass printer names on the command line"
msgstr "�Obrigat� a utiliza� de nomes de impressora na linha de comando"

#, python-format
msgid ""
"pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Refunds jobs.\n"
"\n"
"command line usage :\n"
"\n"
"  pkrefund [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkrefund's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -f | --force         Doesn't ask for confirmation before refunding jobs.\n"
"  -r | --reason txt    Sets textual information to explain the refunding.\n"
"\n"
"  -l | --logo img      Use the image as the receipt's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"\n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"\n"
"  -n | --number N      Sets the number of the first receipt. This number\n"
"                       will automatically be incremented for each receipt.\n"
"\n"
"  -o | --output f.pdf  Defines the name of the PDF file which will contain\n"
"                       the receipts. If not set, then no PDF file will\n"
"                       be created. If set to '-', then --force is assumed,\n"
"                       and the PDF document is sent to standard output.\n"
"\n"
"  -u | --unit u        Defines the name of the unit to use on the receipts.\n"
"                       The default unit is 'Credits', optionally translated\n"
"                       to your native language if it is supported by "
"PyKota.\n"
"  \n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         printername    Printer's name\n"
"         hostname       Client's hostname\n"
"         jobid          Job's Id\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Dates formatting with 'start' and 'end' filter keys :\n"
"  \n"
"    YYYY : year boundaries\n"
"    YYYYMM : month boundaries\n"
"    YYYYMMDD : day boundaries\n"
"    YYYYMMDDhh : hour boundaries\n"
"    YYYYMMDDhhmm : minute boundaries\n"
"    YYYYMMDDhhmmss : second boundaries\n"
"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
"15)\n"
"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
"\n"
"  'now' and 'today' are not exactly the same since today represents the "
"first\n"
"  or last second of the day depending on if it's used in a start= or end=\n"
"  date expression. The utility to be able to specify dates in the future is\n"
"  a question which remains to be answered :-)\n"
"  \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"Examples :\n"
"\n"
"  $ pkrefund --output /tmp/receipts.pdf jobid=503\n"
"  \n"
"  This will refund all jobs which Id is 503. BEWARE : installing CUPS\n"
"  afresh will reset the first job id at 1, so you probably want to use\n"
"  a more precise filter as explained below. A confirmation will\n"
"  be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n"
"  will be created which will contain printable receipts.\n"
"  \n"
"  $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n"
"  \n"
"  Refunds all jobs which id is 503 but which were printed during the\n"
"  past week. The reason will be marked as being an hardware problem.\n"
"  \n"
"  $ pkrefund --force username=jerome printername=HP2100\n"
"  \n"
"  Refunds all jobs printed by user jerome on printer HP2100. No\n"
"  confirmation will be asked.\n"
"  \n"
"  $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n"
"  \n"
"  Refunds all jobs printed on printer HP2100 between February 1st 2006\n"
"  and yesterday. No confirmation will be asked.\n"
msgstr ""

msgid "Refunding receipt"
msgstr ""

msgid "Jobs refunded"
msgstr ""

msgid "Pages refunded"
msgstr ""

msgid "Amount refunded"
msgstr ""

msgid "Reason"
msgstr ""

msgid "Here's the receipt for the refunding of your print jobs"
msgstr ""

msgid "Generating receipts"
msgstr ""

msgid ""
"Refunding for no reason is forbidden. Please use the --reason command line "
"option."
msgstr ""

msgid ""
"The PDF file containing the receipts will be sent to stdout. --force is "
"assumed."
msgstr ""

#, python-format
msgid "Date : %s"
msgstr ""

#, python-format
msgid "JobId : %s"
msgstr ""

#, python-format
msgid "User : %s"
msgstr ""

#, python-format
msgid "Printer : %s"
msgstr ""

#, python-format
msgid "Billing code : %s"
msgstr ""

#, python-format
msgid "Pages : %i"
msgstr ""

#, python-format
msgid "Credits : %.3f"
msgstr ""

#, python-format
msgid "Title : %s"
msgstr ""

msgid "Refund (Y/N)"
msgstr ""

msgid "Y"
msgstr ""

msgid "N"
msgstr ""

#, python-format
msgid "Refunded %i users for %i jobs, %i pages and %.3f credits"
msgstr ""

#, python-format
msgid ""
"pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A turn key tool for PyKota. When launched, this command will initialize\n"
"PyKota's database with all existing print queues and some or all users.\n"
"For now, no prices or limits are set, so printing is fully accounted\n"
"for, but not limited. That's why you'll probably want to also use\n"
"edpykota once the database has been initialized.\n"
"\n"
"command line usage :\n"
"\n"
"  pkturnkey [options] [printqueues names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkturnkey version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --doconf        Give hints about what to put into pykota.conf\n"
"  \n"
"  -d | --dousers       Manages users accounts as well.\n"
"  \n"
"  -D | --dogroups      Manages users groups as well.\n"
"                       Implies -d | --dousers.\n"
"  \n"
"  -e | --emptygroups   Includes empty groups.\n"
"  \n"
"  -f | --force         Modifies the database instead of printing what\n"
"                       it would do.\n"
"                       \n"
"  -u | --uidmin uid    Only adds users whose uid is greater than or equal "
"to\n"
"                       uid. You can pass an username there as well, and its\n"
"                       uid will be used automatically.\n"
"                       If not set, 0 will be used automatically.\n"
"                       Implies -d | --dousers.\n"
"                       \n"
"  -U | --uidmax uid    Only adds users whose uid is lesser than or equal to\n"
"                       uid. You can pass an username there as well, and its\n"
"                       uid will be used automatically.\n"
"                       If not set, a large value will be used "
"automatically.\n"
"                       Implies -d | --dousers.\n"
"\n"
"  -g | --gidmin gid    Only adds groups whose gid is greater than or equal "
"to\n"
"                       gid. You can pass a groupname there as well, and its\n"
"                       gid will be used automatically.\n"
"                       If not set, 0 will be used automatically.\n"
"                       Implies -D | --dogroups.\n"
"                       \n"
"  -G | --gidmax gid    Only adds groups whose gid is lesser than or equal "
"to\n"
"                       gid. You can pass a groupname there as well, and its\n"
"                       gid will be used automatically.\n"
"                       If not set, a large value will be used "
"automatically.\n"
"                       Implies -D | --dogroups.\n"
"\n"
"examples :                              \n"
"\n"
"  $ pkturnkey --dousers --uidmin jerome\n"
"\n"
"  Will simulate the initialization of PyKota's database will all existing\n"
"  printers and print accounts for all users whose uid is greater than\n"
"  or equal to jerome's one. Won't manage any users group.\n"
"  \n"
"  To REALLY initialize the database instead of simulating it, please\n"
"  use the -f | --force command line switch.\n"
"  \n"
"  You can limit the initialization to only a subset of the existing\n"
"  printers, by passing their names at the end of the command line.\n"
msgstr ""

#, python-format
msgid ""
"Printer %s is not managed by PyKota yet. Please modify printers.conf and "
"restart CUPS."
msgstr ""

msgid "Please be patient..."
msgstr ""

msgid "Don't worry, the database WILL NOT BE MODIFIED."
msgstr ""

msgid "Please WORRY NOW, the database WILL BE MODIFIED."
msgstr ""

msgid "System users will have a print account as well !"
msgstr ""

#, python-format
msgid "Unknown username %s : %s"
msgstr ""

msgid "System groups will have a print account as well !"
msgstr ""

#, python-format
msgid "Unknown groupname %s : %s"
msgstr ""

msgid "Simulation terminated."
msgstr ""

msgid "Database initialized !"
msgstr ""

msgid "The --uidmin or --uidmax command line option implies --dousers as well."
msgstr ""

msgid ""
"The --gidmin or --gidmax command line option implies --dogroups as well."
msgstr ""

msgid "The --dogroups command line option implies --dousers as well."
msgstr ""

#, python-format
msgid ""
"pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An Users and Groups Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkusers [options] user1 user2 user3 ... userN\n"
"  \n"
"or :  \n"
"\n"
"  pkusers --groups [options] group1 group2 group3 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkusers's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users if they don't exist on the database.\n"
"                       If they exist, they are modified unless\n"
"                       -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes users from the quota storage.\n"
"\n"
"  -e | --email addr    Sets the email address for the users.\n"
"                       If the addr parameter begins with @, then\n"
"                       the username is prepended to addr to form\n"
"                       a valid email address.\n"
"\n"
"  -D | --description d Adds a textual description to users or groups.\n"
"                       \n"
"  -g | --groups        Edit users groups instead of users.\n"
"                          \n"
"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
"                       when computing the cost of a print job. Positive or \n"
"                       negative floating point values are allowed,\n"
"                       this allows you to do some really creative\n"
"                       things like giving money to an user whenever\n"
"                       he prints. The number of pages in a print job\n"
"                       is not modified by this coefficient, only the\n"
"                       cost of the job for a particular user.\n"
"                       Only users have such a coefficient.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
"                              listed, separated by commas. The groups\n"
"                              must already exist in the Quota Storage.\n"
"                       \n"
"  -L | --list          Lists users or groups.\n"
"  \n"
"  -l | --limitby l     Choose if the user/group is limited in "
"printing                     \n"
"                       by its account balance or by its page quota.\n"
"                       The default value is 'quota'. Allowed values\n"
"                       are 'quota' 'balance' 'noquota' 'noprint' \n"
"                       and 'nochange' :\n"
"                       \n"
"                         - quota : limit by number of pages per printer.\n"
"                         - balance : limit by number of credits in account.\n"
"                         - noquota : no limit, accounting still done.\n"
"                         - nochange : no limit, accounting not done. \n"
"                         - noprint : printing is denied. \n"
"                       NB : nochange and noprint are not supported for "
"groups.\n"
"                       \n"
"  -b | --balance b     Sets the user's account balance to "
"b.                     \n"
"                       Account balance may be increase or decreased\n"
"                       if b is prefixed with + or -.\n"
"                       WARNING : when decreasing account balance,\n"
"                       the total paid so far by the user is decreased\n"
"                       too.\n"
"                       Groups don't have a real balance, but the\n"
"                       sum of their users' account balance.\n"
"                       \n"
"  -C | --comment txt   Defines some informational text to be associated\n"
"                       with a change to an user's account balance.\n"
"                       Only meaningful if -b | --balance is also used.\n"
"                       \n"
"                       \n"
"  -r | --remove        In combination with the --ingroups option "
"above,                       \n"
"                       remove users from the specified users groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkusers to not modify existing users.\n"
"                       \n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkusers --add john paul george ringo/ringo@example.com\n"
"  \n"
"  This will add users john, paul, george and ringo to the quota\n"
"  database. User ringo's email address will also be set to \n"
"  'ringo@example.com'\n"
"  \n"
"  $ pkusers --ingroups coders,it jerome\n"
"  \n"
"  User jerome is put into the groups \"coders\" and \"it\" which must\n"
"  already exist in the quota database.\n"
"            \n"
"  $ pkusers --limitby balance jerome\n"
"  \n"
"  This will tell PyKota to limit jerome by his account's balance\n"
"  when printing.\n"
"  \n"
"  $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n"
"  \n"
"  This will increase jerome's account balance by 10.0 (in your\n"
"  own currency). You can decrease the account balance with a\n"
"  dash prefix, and set it to a fixed amount with no prefix.\n"
"  A comment will be stored for this balance change.\n"
"  \n"
"  $ pkusers --delete jerome rachel\n"
"  \n"
"  This will completely delete jerome and rachel from the quota\n"
"  database. All their quotas and jobs will be deleted too.\n"
"  \n"
"  $ pkusers --overcharge 2.5 poorstudent\n"
"  \n"
"  This will overcharge the poorstudent user by a factor of 2.5.\n"
"  \n"
"  $ pkusers --overcharge -1 jerome\n"
"  \n"
"  User jerome will actually earn money whenever he prints.\n"
"  \n"
"  $ pkusers --overcharge 0 boss\n"
"  \n"
"  User boss can print at will, it won't cost him anything because the\n"
"  cost of each print job will be multiplied by zero before charging\n"
"  his account.\n"
"\n"
"  $ pkusers --email @example.com\n"
"\n"
"  This will set the email address for each user to username@example.com\n"
msgstr ""

#, python-format
msgid "Invalid email address %s"
msgstr "Endere�email inv�do"

#, python-format
msgid "There's no %s matching %s"
msgstr ""

#, python-format
msgid "Limited by : %s"
msgstr ""

#, python-format
msgid "Account balance : %.2f"
msgstr ""

#, python-format
msgid "Total paid so far : %.2f"
msgstr ""

#, python-format
msgid "Overcharging factor : %.2f"
msgstr ""

#, python-format
msgid "Group balance : %.2f"
msgstr ""

#, python-format
msgid "Invalid limitby value %s"
msgstr "Valor inv�do para pol�ca de quota %s"

#, python-format
msgid "Invalid overcharge value %s"
msgstr ""

#, python-format
msgid "Invalid balance value %s"
msgstr "Valor de saldo inv�do %s"

#, python-format
msgid "There's no users group matching %s"
msgstr ""

#, python-format
msgid "Unknown group %s"
msgstr ""

#, python-format
msgid "Unknown user %s"
msgstr ""

#, python-format
msgid "%s %s already exists, skipping."
msgstr ""

#, python-format
msgid "%s %s already exists, will be modified."
msgstr ""

#, python-format
msgid "Invalid name %s"
msgstr ""

msgid "You have to pass user groups names on the command line"
msgstr ""

#, python-format
msgid ""
"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An OSD quota monitor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pykosd [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykosd's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
"                       triplet, for example #FF0000 is 100%% red.\n"
"                       Defaults to 100%% green (#00FF00).\n"
"                       \n"
"  -d | --duration d    Sets the duration of the display in seconds. \n"
"                       Defaults to 3 seconds.\n"
"                       \n"
"  -f | --font f        Sets the font to use for "
"display.                      \n"
"                       Defaults to the Python OSD library's default.\n"
"  \n"
"  -l | --loop n        Sets the number of times the info will be displayed.\n"
"                       Defaults to 0, which means loop forever.\n"
"                       \n"
"  -s | --sleep s       Sets the sleeping duration between two displays \n"
"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
"                       \n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykosd -s 60 --loop 5\n"
"  \n"
"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
"  and will last for 3 seconds (the default) each time. After five\n"
"  iterations, the program will exit.\n"
msgstr ""

#, python-format
msgid "Invalid duration option %s"
msgstr "Op� %s inv�da para dura�"

#, python-format
msgid "Invalid loop option %s"
msgstr "Op� %s inv�da para loop (la�"

#, python-format
msgid "Invalid sleep option %s"
msgstr "Op� %s inv�da para sleep (sono)"

#, python-format
msgid "Invalid color option %s"
msgstr "Op� %s inv�da para color (cor)"

#, python-format
msgid "User %s doesn't exist in PyKota's database"
msgstr "Usu�o %s n�existe na base de dados do Pykota"

#, python-format
msgid "Pages used on %s : %s"
msgstr "P�nas usadas em %s : %s"

#, python-format
msgid "PyKota Units left : %.2f"
msgstr "Unidades restantes do PyKota : %.2f"

msgid "Printing denied."
msgstr ""

msgid "Printing not limited."
msgstr ""

msgid "Printing not limited, no accounting."
msgstr ""

#, python-format
msgid ""
"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Gives print quotes to users.\n"
"\n"
"command line usage :\n"
"\n"
"  pykotme  [options]  [files]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykotme's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykotme --printer apple file1.ps file2.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps and file2.ps \n"
"  which would be sent to the apple printer.\n"
"  \n"
"  $ pykotme --printer apple,hplaser <file1.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps as read from\n"
"  standard input, which would be sent to the apple or hplaser\n"
"  printer.\n"
"\n"
"  $ pykotme \n"
"  \n"
"  This will give a quote for a job consisting of what is on standard \n"
"  input. The quote will list the job size, and the price the job\n"
"  would cost on each printer.\n"
msgstr ""

#, python-format
msgid "Your account balance : %.2f"
msgstr "Saldo da sua conta : %.2f"

#, python-format
msgid "Job size : %i pages"
msgstr "Tamanho do pedido : %i p�nas"

#, python-format
msgid "Cost on printer %s : %.2f"
msgstr "Custo da impressora %s : %.2f"

msgid "won't be charged, printer is in passthrough mode"
msgstr ""

msgid "won't be charged, your account is immutable"
msgstr ""

#, python-format
msgid "Unsupported accounter backend %s"
msgstr "Backend de cota %s n�suportado"

#, python-format
msgid ""
"Configuration file %s can't be read. Please check that the file exists and "
"that your permissions are sufficient."
msgstr ""

#, python-format
msgid "Configuration file %s not found."
msgstr "Ficheiro de configura� %s n�encontrado."

#, python-format
msgid "Option %s not found in section global of %s"
msgstr "A op� %s n�foi encontrada na sec� global de %s"

#, python-format
msgid "Option %s not found in section %s of %s"
msgstr "A op� %s n�foi encontrada na sec� %s de %s"

#, python-format
msgid "Option ldaptls is set, but certificate %s is not readable."
msgstr ""

#, python-format
msgid "Option logger only supports values in %s"
msgstr "A op� logger s�porta valores em %s"

#, python-format
msgid "Invalid preaccounter %s for printer %s"
msgstr ""

#, python-format
msgid "Option preaccounter in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid accounter %s for printer %s"
msgstr "Contador de p�nas %s inv�do, para a impressora %s"

#, python-format
msgid "Option accounter in section %s only supports values in %s"
msgstr "A op� accounter na sec� %s s�porta valores em %s"

#, python-format
msgid "Invalid unknown_billingcode directive %s for printer %s"
msgstr ""

#, python-format
msgid "Directive unknown_billingcode in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option enforcement in section %s only supports values in %s"
msgstr "Op� enforcement (refor� na se� %s s�porta valores em %s"

#, python-format
msgid ""
"Option onbackenderror in section %s only supports values 'charge', "
"'nocharge', and 'retry:num:delay'"
msgstr ""

#, python-format
msgid "Option onaccountererror in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option policy in section %s only supports values in %s"
msgstr "A op� policy na sec� %s s�porta valores em %s"

#, python-format
msgid "Invalid option mailto %s for printer %s"
msgstr "Op� mailto %s inv�da, para a impressora %s"

#, python-format
msgid "Option mailto in section %s only supports values in %s"
msgstr "a op� mailto na sec� %s s�porta valores em %s"

#, python-format
msgid "Invalid maximal deny banners counter %s"
msgstr ""

#, python-format
msgid "Invalid grace delay %s"
msgstr "Per�o de toler�ia inv�do %s"

#, python-format
msgid "Invalid poor man's threshold %s"
msgstr "Valor 'poor man' %s inv�do"

#, python-format
msgid "Invalid balancezero value %s"
msgstr ""

msgid ""
"Your Print Quota account balance is Low.\n"
"Soon you'll not be allowed to print anymore.\n"
"Please contact the Print Quota Administrator to solve the problem."
msgstr ""
"O seu saldo de impress��aixo.\n"
"Em breve n�poder�mprimir.\n"
"Por favor contacte o administrador do servi�de impress�de forma a "
"resolver o problema."

#, python-format
msgid ""
"You are not allowed to print anymore because\n"
"your Print Quota is exceeded on printer %s."
msgstr ""
"Foi-lhe vedado o acesso ao servi�de impress�j�ue a\n"
"sua quota de impress�foi excedida, na impressora %s."

#, python-format
msgid ""
"You will soon be forbidden to print anymore because\n"
"your Print Quota is almost reached on printer %s."
msgstr ""
"Em breve n�poder�mprimir j�ue a\n"
"sua quota de impress�est�uase a ser atingida, na impressora %s."

#, python-format
msgid "Incorrect value %s for the duplicatesdelay directive in section %s"
msgstr ""

#, python-format
msgid "Incorrect value %s for the noprintingmaxdelay directive in section %s"
msgstr ""

#, python-format
msgid "Option accountbanner in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option trustjobsize for printer %s is incorrect"
msgstr ""

msgid "History"
msgstr "Hist�o"

msgid "Users"
msgstr ""

msgid "Groups"
msgstr ""

msgid "Printers"
msgstr ""

msgid "Users Print Quotas"
msgstr ""

msgid "Users Groups Print Quotas"
msgstr ""

msgid "History of Payments"
msgstr ""

msgid "Printers Groups Membership"
msgstr ""

msgid "Users Groups Membership"
msgstr ""

msgid "Billing Codes"
msgstr ""

msgid "All"
msgstr ""

msgid "Comma Separated Values"
msgstr ""

msgid "Semicolon Separated Values"
msgstr ""

msgid "Tabulation Separated Values"
msgstr ""

msgid "eXtensible Markup Language"
msgstr ""

msgid "CUPS' page_log"
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --data command line option, see help."
msgstr ""

msgid ""
"Dumping all PyKota's datas forces format to XML, and disables --sum and "
"filters."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --format command line option, see help."
msgstr ""

msgid "XML output is disabled because the jaxml module is not available."
msgstr ""

#, python-format
msgid "Invalid data type [%s] for --sum command line option, see help."
msgstr ""

msgid "PyKota data dumper failed : I/O error"
msgstr ""

#, python-format
msgid "Unsupported logging subsystem %s"
msgstr "Sistema de logging %s n�suportado"

#, python-format
msgid "Report for %s quota on printer %s"
msgstr "Relat� de cota %s para a impressora %s"

#, python-format
msgid "Pages grace time: %i days"
msgstr "Per�o de toler�ia : %i d�"

#, python-format
msgid "Price per job: %.3f"
msgstr "Pre�por trabalho: %.3f"

#, python-format
msgid "Price per page: %.3f"
msgstr "Pre�por p�na: %.3f"

msgid ""
"Group          overcharge   used    soft    hard    balance grace         "
"total       paid warn"
msgstr ""

msgid ""
"User           overcharge   used    soft    hard    balance grace         "
"total       paid warn"
msgstr ""

msgid "unknown"
msgstr "Desconhecido"

#, python-format
msgid "Real : %s"
msgstr "Real : %s"

#, python-format
msgid "Total : %9i"
msgstr "Total : %9i"

msgid "N/A"
msgstr ""

#, python-format
msgid "Unsupported reporter backend %s"
msgstr "Backend reporter %s n�suportado"

#, python-format
msgid "Refunded %i pages and %.3f credits by %s (%s) on %s"
msgstr ""

#, python-format
msgid "Unsupported quota storage backend %s"
msgstr "Base de dados %s n�suportada"

msgid "Done"
msgstr ""

msgid "Average speed"
msgstr ""

msgid "entries per second"
msgstr ""

#, python-format
msgid "Strange problem with uid(%s) : %s"
msgstr ""

#, python-format
msgid "Running as user '%s'."
msgstr ""

msgid "No user named 'pykota'. Not dropping priviledges."
msgstr ""

#, python-format
msgid "Impossible to drop priviledges : %s"
msgstr ""

msgid "Priviledges dropped. Now running as user 'pykota'."
msgstr ""

#, python-format
msgid "Impossible to regain priviledges : %s"
msgstr ""

msgid "Regained priviledges. Now running as root."
msgstr ""

msgid "Please report bugs to :"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Please contact your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""
"\n"
"\n"
"Por favor contacte a seu administrador de sistemas:\n"
"\n"
"\t%s - <%s>\n"

#, python-format
msgid "Unable to match user %s on printer %s, applying default policy (%s)"
msgstr ""
"N�foi poss�l encontrar o utilizador %s para a impressora %s, foi "
"aplicada por omiss�a pol�ca (%s)"

#, python-format
msgid ""
"Unable to find user %s's account balance, applying default policy (%s) for "
"printer %s"
msgstr ""
"N�foi poss�l encontrar o saldo da conta do utilizador %s, foi "
"configurado por omiss�o valor (%s) para a impressora %s"

#, python-format
msgid "User %s will not be charged for printing."
msgstr ""

#, python-format
msgid "Print Quota exceeded for group %s on printer %s"
msgstr "Cota de impress�excedida para o grupo %s na impressora %s"

msgid "Print Quota Exceeded"
msgstr "Cota de impress�excedida"

#, python-format
msgid "Print Quota low for group %s on printer %s"
msgstr "Cota de impress�baixa para o grupo %s na impresora %s"

msgid "Print Quota Low"
msgstr "Cota de impress�baixa"

#, python-format
msgid ""
"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
"double check /etc/pykota/pykota.conf : %s"
msgstr ""
"Base de busca %s parece n�existir, provavelmente por causa de m�
"configura�.Por favor, verifique as configura�s do arquivo /etc/pykota/"
"pykota.conf : %s"

#, python-format
msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
msgstr ""
"A pesquisa de %s(%s) usando o esc� %s(scope=%s) n�devolveu resultados."

#, python-format
msgid "Problem adding LDAP entry (%s, %s)"
msgstr "Ocorreu um problema ao adicionar a entrada LDAP (%s, %s)"

#, python-format
msgid "Problem deleting LDAP entry (%s)"
msgstr "Ocorreu um problema ao apagar a entrada LDAP (%s)"

#, python-format
msgid "Problem modifying LDAP entry (%s, %s)"
msgstr "Ocorreu um problema ao modificar a entrada LDAP (%s, %s)"

#, python-format
msgid ""
"No pykotaAccountBalance object found for user %s. Did you create LDAP "
"entries manually ?"
msgstr ""

msgid "Hidden because of privacy concerns"
msgstr ""

#, python-format
msgid ""
"Unable to find an existing objectClass %s entry with %s=%s to attach "
"pykotaAccount objectClass"
msgstr ""
"Imposs�l encontrar uma entrada objectClass %s existente com %s=%s "
"paraanexar objectClass pykotaAccount"

#, python-format
msgid "%s. A new entry will be created instead."
msgstr ""

#, python-format
msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
msgstr ""
"Imposs�l encontrar uma entrada existente para anexar ao objectClass "
"pykotaGroup %s"

msgid ""
"Your version of python-mysqldb is too old. Please install a newer release."
msgstr ""

#, python-format
msgid "A problem occured while reading printer %s's internal page counter."
msgstr ""

#, python-format
msgid "Retrieving printer %s's page counter from database instead."
msgstr ""

#, python-format
msgid ""
"Couldn't retrieve printer %s's internal page counter either before or after "
"printing."
msgstr ""

#, python-format
msgid "Job's size forced to 1 page for printer %s."
msgstr ""

#, python-format
msgid "No previous job in database for printer %s."
msgstr ""

#, python-format
msgid "Inconsistent values for printer %s's internal page counter."
msgstr ""

#, python-format
msgid "Unknown printer address in HARDWARE(%s) for printer %s"
msgstr "Endere�inv�do em HARDWARE(%s) para a impressora %s"

#, python-format
msgid "Launching HARDWARE(%s)..."
msgstr "Tentando identifica� f�ca(%s)..."

#, python-format
msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
msgstr "Sinal SIGTERM enviado para contador f�co %s (pid : %s)"

#, python-format
msgid "Line [%s] skipped in accounter's output. Trying again..."
msgstr ""

#, python-format
msgid "Hardware accounter %s exit code is %s"
msgstr ""

#, python-format
msgid "Unable to query printer %s via HARDWARE(%s)"
msgstr "Foi imposs�l consultar a impressora %s via HARDWARE(%s)"

#, python-format
msgid ""
"Unable to precompute the job's size and ink coverage with the generic PDL "
"analyzer : %s"
msgstr ""

#, python-format
msgid "Problem during connection to %s:%s : %s"
msgstr ""

#, python-format
msgid "Problem while sending PJL query to %s:%s : %s"
msgstr ""

#, python-format
msgid "Problem while receiving PJL answer from %s:%s : %s"
msgstr ""

#, python-format
msgid "Waiting for printer %s to be printing..."
msgstr ""

#, python-format
msgid "Waiting for printer %s's idle status to stabilize..."
msgstr ""

#, python-format
msgid ""
"PJL querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid ""
"SNMP querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""

#, python-format
msgid "Network error while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "SNMP message decoding error for printer %s : %s"
msgstr ""

#, python-format
msgid "Problem encountered while doing SNMP queries on printer %s : %s"
msgstr ""

#, python-format
msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
msgstr ""
"Imposs�l calcular tamanho da tarefa usando analisador gen�o de PDL : %s"

#, python-format
msgid "Launching SOFTWARE(%s)..."
msgstr "Tentando identifica� l�a (%s)..."

#, python-format
msgid "Unable to compute job size with accounter %s"
msgstr "Foi imposs�l calcular o tamanho do trabalho com o contador %s"

#, python-format
msgid "Problem while waiting for software accounter pid %s to exit : %s"
msgstr "Problema ao aguardar encerramento do contador l�o de pid %s : %s"

#, python-format
msgid "Software accounter %s exit code is %s"
msgstr "C�o de erro para contador l�o %s : %s"

msgid "Totals may be inaccurate if some users are members of several groups."
msgstr ""
"O total pode n�ser exacto, caso os utilizadores sejam membros de v�os "
"grupos."

msgid "PyKota Data Dumper"
msgstr ""

msgid "Dump"
msgstr ""

msgid "Please click on the above button"
msgstr ""

msgid "Data Type"
msgstr ""

msgid "Output Format"
msgstr ""

msgid "Filter"
msgstr ""

msgid "Summarize"
msgstr ""

msgid "only for payments or history"
msgstr ""

msgid "PyKota Reports"
msgstr "Relat� do Pykota"

msgid "Report"
msgstr "Relat�"

msgid "Printer"
msgstr "Impressora"

msgid "User / Group names mask"
msgstr "M�ara de nomes para Usu�os / Grupos"

msgid "Groups report"
msgstr "Relat� de Grupos"

msgid "Empty"
msgstr "Vazio"

msgid "Action"
msgstr "A�"

msgid "User"
msgstr "Usu�o"

msgid "Hostname"
msgstr "Nome do computador"

msgid "JobId"
msgstr "Id da Tarefa"

msgid "Number of pages"
msgstr ""

msgid "Cost"
msgstr ""

msgid "Copies"
msgstr "C�s"

msgid "Number of bytes"
msgstr ""

msgid "Printer's internal counter"
msgstr ""

msgid "Options"
msgstr "Op�s"

msgid "MD5Sum"
msgstr ""

msgid "Billing code"
msgstr ""

msgid "Precomputed number of pages"
msgstr ""

msgid "Precomputed cost"
msgstr ""

msgid "Pages details"
msgstr ""

msgid "(not supported yet)"
msgstr ""

msgid "Previous page"
msgstr "P�na anterior"

msgid "PyKota Quotes"
msgstr ""

msgid "Quote"
msgstr ""

msgid ""
"The exact cost of a print job can only be determined for a particular user. "
"Please retry while logged-in."
msgstr ""

msgid "Ordering"
msgstr ""

#~ msgid "Impossible to add printer %s"
#~ msgstr "Foi imposs�l adicionar a impressora %s"

#~ msgid "Prototype object %s not found in Quota Storage."
#~ msgstr "Objecto do prot�o %s n�encontrado na base de dados."

#~ msgid "Prototype %s not found in Quota Storage for printer %s."
#~ msgstr "Prot�o %s n�encontrado na base de dados para a impressora %s."

#~ msgid "Undefined hard limit set to soft limit (%s) on printer %s."
#~ msgstr ""
#~ "Limite m�mo indefinido, foi usado o valor do limite m�mo (%s) para a "
#~ "impressora %s."

#~ msgid "Undefined soft limit set to hard limit (%s) on printer %s."
#~ msgstr ""
#~ "Limite m�mo indefinido, foi usado o valor do limite m�mo (%s) para a "
#~ "impressora %s."

#~ msgid "Invalid group name %s"
#~ msgstr "O nome do grupo %s �nv�do"

#~ msgid "Invalid user name %s"
#~ msgstr "O nome do utilizador %s �nv�do"

#~ msgid "Quota not found for object %s on printer %s."
#~ msgstr "Cota n�encontrada para o objecto %s da impressora %s."

#~ msgid "Group %s not found in the PyKota Storage."
#~ msgstr "Grupo %s n�encontrado na base de dados."

#~ msgid "File number %s unregistered twice from polling object, ignored."
#~ msgstr ""
#~ "Arquivo n� %s descadastrado duas vezes do objeto de consulta. Ignorado"

#~ msgid "SIGTERM was sent to real backend %s (pid: %s)"
#~ msgstr "Foi enviado um SIGTERM para o backend %s (pid: %s)"

#~ msgid "CUPS backend %s died abnormally."
#~ msgstr "O backend CUPS morreu inesperadamente."

#~ msgid "Software accounting already done in first pass. Ignoring."
#~ msgstr "O contador l�o j�oi aplicado no primeiro passo. Ignorando."

#~ msgid "Hardware accounting already done in first pass. Ignoring."
#~ msgstr "O contador f�co j�oi aplicado no primeiro passo. Ignorando"

#~ msgid "Invalid DeviceURI : %s"
#~ msgstr "DeviceURI inv�do : %s"

#~ msgid ""
#~ "\n"
#~ "Please wait while pkhint analyzes your printing system's configuration..."
#~ msgstr ""
#~ "\n"
#~ "Por favor, aguarde enquanto pkhint analisa as configura�s de seu "
#~ "sistema de impress�.."

#~ msgid "Unknown device %s for printer %s"
#~ msgstr "Dispositivo %s inv�do para a impressora %s"

#~ msgid ""
#~ "\n"
#~ "Put the following lines into your /etc/pykota/pykota.conf file :\n"
#~ msgstr ""
#~ "\n"
#~ "Pondo as seguintes linhas no arquivo /etc/pykota/pykota.conf : \n"

#~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
#~ msgstr "# CUIDADO : se o contador l�o for sugerido, isto n�significa"

#~ msgid ""
#~ "# that hardware accounting wouldn't work, this only means that PyKota"
#~ msgstr ""
#~ "# que o contador l�o poder��funcionar. Isto significa somente que "
#~ "o Pykota"

#~ msgid "# wasn't able to autodetect which hardware accounting method to use."
#~ msgstr ""
#~ "# n�foi capaz de detectar automaticamente o m�do de contagem f�ca a "
#~ "ser utilizado"

#~ msgid "JobSize"
#~ msgstr "Tamanho da Tarefa"

#~ msgid "JobPrice"
#~ msgstr "Pre�da Tarefa"

#~ msgid "JobBytes"
#~ msgstr "Tamanho da Tarefa em Bytes"

#~ msgid "PageCounter"
#~ msgstr "Contador de p�nas"

#~ msgid "Printing system %s, args=%s"
#~ msgstr "Sistema de impress�%s, argumentos=%s"

#~ msgid "Printer hostname undefined, set to 'localhost'"
#~ msgstr ""
#~ "Nome do servidor de impress�n�definido, foi configurado para "
#~ "'localhost'"

#~ msgid "Printing system unknown, args=%s"
#~ msgstr "Sistema de impress�desconhecido, args=%s"

#~ msgid ""
#~ "Group           used    soft    hard    balance grace         total       "
#~ "paid"
#~ msgstr ""
#~ "Grupo           gasto   m�mo  m�mo  saldo   toler�ia    total       "
#~ "pago"

#~ msgid ""
#~ "User            used    soft    hard    balance grace         total       "
#~ "paid"
#~ msgstr ""
#~ "Utilizador      gasto   m�mo  m�mo  saldo   toler�ia    total       "
#~ "pago"