root / pykota / trunk / po / el_GR / pykota.po @ 3279

#
# PyKota : Print Quotas for CUPS
#
# (c) 2003, 2004, 2005, 2006, 2007, 2008 Jerome Alet <alet@librelogiciel.com>
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
# $Id$
# 
# PyKota translation master file.
# Copyright (c) 2003, 2004, 2005 Conseil Internet & Logiciels Libres
# Jerome Alet <alet@librelogiciel.com>, 2003, 2004, 2005.
# 
msgid ""
msgstr ""
"Project-Id-Version: PyKota v1.20\n"
"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
"POT-Creation-Date: 2006-03-30 22:00+0200\n"
"PO-Revision-Date: 2004-10-26 18:51:00+0200\n"
"Last-Translator: Spyros Melissovas <peppe@cs.uoi.gr>\n"
"Language-Team: Greek <peppe@cs.uoi.gr>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#
# NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY
#
msgid "ALLOW"
msgstr ""

msgid "DENY"
msgstr ""

msgid "CANCEL"
msgstr ""

msgid "PROBLEM"
msgstr ""

msgid "REFUND"
msgstr ""

#, python-format
msgid ""
"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A tool to automate user account creation and initial balance setting.\n"
"\n"
"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
"\n"
"command line usage :\n"
"\n"
"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
"  OF AN external policy IN pykota.conf\n"
"  \n"
"  autopykota { -i | --initbalance value } \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints autopykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
"                       If the user already exists, actual balance is left\n"
"                       unmodified. If unset, the default value is 0.\n"
"\n"
"  -e | --email addr    Sets the user's e-mail address.\n"
"  \n"
msgstr ""

#, python-format
msgid "SIGTERM received, job %s cancelled."
msgstr "SIGTERM ελήφθη, ακύρωση εργασίας %s."

#, python-format
msgid "Network error while querying the CUPS server : %s"
msgstr ""

msgid "You are not allowed to print at this time."
msgstr ""

msgid "Print job cancelled."
msgstr ""

msgid "Unlimited"
msgstr ""

msgid "ON"
msgstr ""

msgid "OFF"
msgstr ""

#, python-format
msgid "Banner generator %s exit code is %s"
msgstr ""

msgid "Banner won't be printed : maximum number of deny banners reached."
msgstr ""

#, python-format
msgid "Beware : computed job size (%s) != precomputed job size (%s)"
msgstr ""

msgid "The job size will be trusted anyway according to the 'trustjobsize' directive"
msgstr ""

#, python-format
msgid "The job size will be trusted because it is inferior to the 'trustjobsize' directive's limit %s"
msgstr ""

#, python-format
msgid "The job size will be modified according to the 'trustjobsize' directive : %s"
msgstr ""

#, python-format
msgid "Printer %s not registered in the PyKota system, applying external policy (%s) for printer %s"
msgstr "Ο εκτυπωτής %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή εξωτερικής πολιτικής (%s) για τον εκτυπωτή %s"

#, python-format
msgid "User %s not registered in the PyKota system, applying external policy (%s) for printer %s"
msgstr "Ο χρήστης %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή εξωτερικής πολιτικής (%s) για τον εκτυπωτή %s"

#, python-format
msgid "User %s doesn't have quota on printer %s in the PyKota system, applying external policy (%s) for printer %s"
msgstr "Ο χρήστης %s δεν έχει όριο στον εκτυπωτή %s στο σύστημα PyKota, εφαρμογή εξωτερικής πολιτικής (%s) για τον εκτυπωτή %s"

#, python-format
msgid "External policy %s for printer %s produced an error. Job rejected. Please check PyKota's configuration files."
msgstr "Η εξωτερική πολιτική %s για τον εκτυπωτή %s παρήγαγε σφάλμα.Απόρριψη εργασίας. Παρακαλώ ελέγξτε τα αρχεία ρυθμίσεων του PyKota."

#, python-format
msgid "Printer %s not registered in the PyKota system, applying default policy (%s)"
msgstr "Ο εκτυπωτής %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή ερήμην πολιτικής (%s)"

#, python-format
msgid "User %s not registered in the PyKota system, applying default policy (%s) for printer %s"
msgstr "Ο χρήστης %s δεν είναι καταχωρημένος στο σύστημα PyKota, εφαρμογή ερήμην πολιτικής (%s) για τον εκτυπωτή %s"

#, python-format
msgid "User %s doesn't have quota on printer %s in the PyKota system, applying default policy (%s)"
msgstr "Ο χρήστης %s δεν έχει όριο στον εκτυπωτή %s στο σύστημα PyKota, εφαρμογή ερήμην πολιτικής (%s)"

#, python-format
msgid "Printer %s still not registered in the PyKota system, job will be rejected"
msgstr "Ο εκτυπωτής %s δεν είναι ακόμη καταχωρημένος στο σύστημα PyKota, η εργασία θα απορριφθεί"

#, python-format
msgid "User %s still not registered in the PyKota system, job will be rejected on printer %s"
msgstr "Ο χρήστης %s δεν είναι ακόμη καταχωρημένος στο σύστημα PyKota, η εργασία θα απορριφθεί στον εκτυπωτή %s"

#, python-format
msgid "User %s still doesn't have quota on printer %s in the PyKota system, job will be rejected"
msgstr "Ο χρήστης %s δεν έχει ακόμη όριο στον εκτυπωτή %s στο σύστημα PyKota, η εργασία θα απορριφθεί"

msgid "Job is a dupe"
msgstr ""

msgid "Printing is denied by configuration"
msgstr ""

#, python-format
msgid "Duplicate print jobs are not allowed on printer %s."
msgstr ""

msgid "Subprocess denied printing of a dupe"
msgstr ""

#, python-format
msgid "Duplicate print jobs are not allowed on printer %s at this time."
msgstr ""

msgid "Subprocess allowed printing of a dupe"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""

#, python-format
msgid "Impossible to connect to SMTP server : %s"
msgstr "Αδύνατη η σύνδεση με τον εξυπηρετητή SMTP : %s"

msgid "Print Quota"
msgstr "Όριο εκτυπώσεων"

#, python-format
msgid "Impossible to send mail to %s, error %s : %s"
msgstr "Αδύνατη η αποστολή e-mail στον %s, σφάλμα %s : %s"

#, python-format
msgid "Problem when sending mail : %s"
msgstr ""

msgid "Job contains no data. Printing is denied."
msgstr "Η εργασία δεν περιέχει δεδομένα. Η εκτύπωση απορρίπτεται."

msgid "Error in external policy script. Printing is denied."
msgstr ""

#, python-format
msgid "Still no print quota entry for user %s on printer %s after external policy. Printing is denied."
msgstr ""

msgid "Printing is denied by printer policy."
msgstr ""

msgid "Job allowed by printer policy. No accounting will be done."
msgstr ""

#, python-format
msgid "Invalid policy %s for printer %s"
msgstr "Μη αποδεκτή πολιτική %s για τον εκτυπωτή %s"

#, python-format
msgid "Precomputed job size (%s pages) too large for printer %s."
msgstr ""

#, python-format
msgid "You are not allowed to print so many pages on printer %s at this time."
msgstr ""

#, python-format
msgid "User %s is not allowed to print at this time."
msgstr ""

msgid "Your account settings forbid you to print at this time."
msgstr ""

#, python-format
msgid "Print Quota exceeded for user %s on printer %s"
msgstr "Υπέρβαση ορίου εκτυπώσεων για τον χρήστη %s στον εκτυπωτή %s"

#, python-format
msgid "Print Quota low for user %s on printer %s"
msgstr "Χαμηλό υπόλοιπο εκτυπώσεων για τον χρήστη %s στον εκτυπωτή %s"

msgid "Job denied, no accounting will be done."
msgstr ""

msgid "Job cancelled, no accounting will be done."
msgstr ""

msgid "Job accounting begins."
msgstr "Έναρξη σελιδομέτρησης εργασίας."

msgid "Job denied, no accounting has been done."
msgstr ""

msgid "Job cancelled, no accounting has been done."
msgstr ""

msgid "Job accounting ends."
msgstr "Λήξη σελιδομέτρησης εργασίας."

msgid "Job size forced to 0 because the real CUPS backend failed. No accounting will be done."
msgstr ""

msgid "The real CUPS backend failed, but the job will be accounted for anyway."
msgstr ""

msgid "Job size forced to 0 because printing is denied."
msgstr "Το μέγεθος της εργασίας μηδενίστηκε γιατί η εκτύπωση απαγορεύεται."

msgid "Job size forced to 0 because printing was cancelled."
msgstr ""

#, python-format
msgid "Job size : %i"
msgstr "Μέγεθος εργασίας : %i"

#, python-format
msgid "User %s's quota on printer %s won't be modified"
msgstr ""

#, python-format
msgid "Updating user %s's quota on printer %s"
msgstr "Ενημέρωση ορίου του χρήστη %s στον εκτυπωτή %s"

msgid "Job added to history."
msgstr "Η εργασία προστέθηκε στο ιστορικό."

#, python-format
msgid "Billing code %s was updated."
msgstr ""

#, python-format
msgid "Incorrect value for the 'onbackenderror' directive in section [%s]"
msgstr ""

#, python-format
msgid "The real backend produced an error, we will try again in %s seconds."
msgstr ""

#, python-format
msgid "Job %s interrupted by the administrator !"
msgstr ""

#, python-format
msgid ""
"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Dumps PyKota database's content.\n"
"\n"
"command line usage :\n"
"\n"
"  dumpykota [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints dumpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
"                       \n"
"                         - history : dumps the jobs history.\n"
"                         - users : dumps users.\n"
"                         - groups : dumps user groups.\n"
"                         - printers : dump printers.\n"
"                         - upquotas : dump user quotas.\n"
"                         - gpquotas : dump user groups quotas.\n"
"                         - payments : dumps user payments.\n"
"                         - pmembers : dumps printer groups members.\n"
"                         - umembers : dumps user groups members.\n"
"                         - billingcodes : dumps billing codes.\n"
"                         - all : dumps all PyKota datas. The output format\n"
"                                 is always XML in this case.\n"
"                         \n"
"                       NB : the -d | --data command line option   \n"
"                       is MANDATORY.\n"
"  \n"
"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
"                       the format is to dump datas in the csv format (comma\n"
"                       separated values). All data dumped is between double\n"
"                       quotes. Allowed formats are :\n"
"                       \n"
"                         - csv : separate datas with commas\n"
"                         - ssv : separate datas with semicolons\n"
"                         - tsv : separate datas with tabs\n"
"                         - xml : dump data as XML \n"
"                         - cups : dump datas in CUPS' page_log format :\n"
"                                  ONLY AVAILABLE WITH --data history\n"
"                         \n"
"  -o | --output fname  All datas will be dumped to the file instead of\n"
"                       to the standard output. The special '-' filename\n"
"                       is the default value and means stdout.\n"
"                       WARNING : existing files are truncated !\n"
"\n"
"  -O | --orderby exp   Change the ordering or result. 'exp' is a comma\n"
"                       separated list of ordering statements, for example\n"
"                       '--orderby +username,-printername'. Not all expression\n"
"                       values are meaningful, so using this command line \n"
"                       switch is not recommanded if you don't know the \n"
"                       exact layout of PyKota's database schema.\n"
"                       \n"
"  -s | --sum           Summarize the selected datas.\n"
"                           ONLY AVAILABLE WITH --data history or payments\n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         groupname      Users group's name\n"
"         printername    Printer's name\n"
"         pgroupname     Printers group's name\n"
"         hostname       Client's hostname\n"
"         jobid          Job's Id\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Dates formatting with 'start' and 'end' filter keys :\n"
"  \n"
"    YYYY : year boundaries\n"
"    YYYYMM : month boundaries\n"
"    YYYYMMDD : day boundaries\n"
"    YYYYMMDDhh : hour boundaries\n"
"    YYYYMMDDhhmm : minute boundaries\n"
"    YYYYMMDDhhmmss : second boundaries\n"
"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n"
"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
"\n"
"  'now' and 'today' are not exactly the same since today represents the first\n"
"  or last second of the day depending on if it's used in a start= or end=\n"
"  date expression. The utility to be able to specify dates in the future is\n"
"  a question which remains to be answered :-)\n"
"  \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"  NB : not all keys are allowed for each data type, so the result may be \n"
"  empty if you use a key not available for a particular data type.\n"
"  \n"
"Examples :\n"
"\n"
"  $ dumpykota --data history --format csv >myfile.csv\n"
"  \n"
"  This dumps the history in a comma separated values file, for possible\n"
"  use in a spreadsheet.\n"
"  \n"
"  $ dumpykota --data users --format xml -o users.xml\n"
"  \n"
"  Dumps all users datas to the users.xml file.\n"
"  \n"
"  $ dumpykota --data history printername=HP2100 username=jerome\n"
"  \n"
"  Dumps the job history for user jerome on printer HP2100 only.\n"
"  \n"
"  $ dumpykota --data history start=200503 end=20050730234615\n"
"  \n"
"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
msgstr ""

msgid "The -d | --data command line option is mandatory, see help."
msgstr "Η παράμετρος -d | --data είναι υποχρεωτική, δείτε τη βοήθεια."

#, python-format
msgid ""
"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A Print Quota editor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  edpykota [options] user1 user2 ... userN\n"
"  \n"
"  edpykota [options] group1 group2 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users or groups print quota entries if\n"
"                       they don't exist in database.\n"
"                       \n"
"  -d | --delete        Deletes users or groups print quota entries.\n"
"                       Users or groups are never deleted, you have\n"
"                       to use the pkusers command to delete them.\n"
"                       The history will be purge from all matching\n"
"                       jobs, unless -g | --groups is used.\n"
"  \n"
"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers. \n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"  -g | --groups        Edit groups print quota entries instead of \n"
"                       users print quota entries.\n"
"                          \n"
"  -L | --list          Lists users or groups print quota entries.\n"
"  \n"
"  -n | --noquota       Sets both soft and hard limits to None for users\n"
"                       or groups print quota entries.\n"
"  \n"
"  -r | --reset         Resets the actual page counter for the user\n"
"                       or group to zero on the specified printers. \n"
"                       The life time page counter is kept unchanged.\n"
"                       \n"
"  -R | --hardreset     Resets the actual and life time page counters\n"
"                       for the user or group to zero on the specified \n"
"                       printers. This is a shortcut for '--used 0'.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       edpykota to not modify existing print quota entries.\n"
"                       \n"
"  -S | --softlimit sl  Sets the quota soft limit to sl pages.                       \n"
"  \n"
"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
"  \n"
"  -I | --increase v    Increase existing Soft and Hard limits by the value\n"
"                       of v. You can prefix v with + or -, if no sign is\n"
"                       used, + is assumed.\n"
"\n"
"  -U | --used u        Sets the page counters for the user u pages on\n"
"                       the selected printers. Doesn't work for groups, since\n"
"                       their page counters are the sum of all their members'\n"
"                       page counters.\n"
"                       Useful for migrating users from a different system\n"
"                       where they have already used some pages. Actual\n"
"                       and Life Time page counters may be increased or decreased\n"
"                       if u is prefixed with + or -.\n"
"                       WARNING : BOTH page counters are modified in all cases,\n"
"                       so be careful.\n"
"                       NB : if u equals '0', then the action taken is\n"
"                       the same as if --hardreset was used.\n"
"\n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ edpykota --add john paul george ringo\n"
"  \n"
"  This will create print quota entries for users john, paul, george\n"
"  and ringo on all printers. These print quota entries will have no\n"
"  limit set.\n"
"  \n"
"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
"  \n"
"  This will set jerome's print quota on the lp printer to a soft limit\n"
"  of 50 pages, and a hard limit of 60 pages. Both user jerome and\n"
"  printer lp have been previously created with the pkusers and pkprinters\n"
"  commands, respectively.\n"
"\n"
"  $ edpykota -g -S 500 -H 550 financial support            \n"
"  \n"
"  This will set print quota soft limit to 500 pages and hard limit\n"
"  to 550 pages for groups financial and support on all printers.\n"
"  \n"
"  $ edpykota --reset jerome \"jo*\"\n"
"  \n"
"  This will reset jerome's page counter to zero on all printers, as\n"
"  well as every user whose name begins with 'jo'.\n"
"  Their life time page counter on each printer will be kept unchanged.\n"
"  You can also reset the life time page counters by using the\n"
"  --hardreset | -R command line option.\n"
"  \n"
"  $ edpykota --printer hpcolor --noquota jerome\n"
"  \n"
"  This will tell PyKota to not limit jerome when printing on the \n"
"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
"  accounting of the pages he prints will still be kept.\n"
"  Print Quotas for jerome on other printers are unchanged.\n"
"  \n"
"  $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n"
"  \n"
"  This will delete users jerome and rachel's print quota\n"
"  entries on all printers which name begin with 'HP' or\n"
"  'XER'. The jobs printed by these users on these printers\n"
"  will be deleted from the history.\n"
msgstr ""

#, python-format
msgid "You can't set negative limits for %s"
msgstr ""

msgid "Extracting datas"
msgstr ""

#, python-format
msgid "Page counter : %s"
msgstr ""

#, python-format
msgid "Lifetime page counter : %s"
msgstr ""

#, python-format
msgid "Soft limit : %s"
msgstr ""

#, python-format
msgid "Hard limit : %s"
msgstr ""

#, python-format
msgid "Date limit : %s"
msgstr ""

#, python-format
msgid "Maximum job size : %s"
msgstr ""

#, python-format
msgid "%s pages"
msgstr ""

#, python-format
msgid "Warning banners printed : %s"
msgstr ""

msgid "Deletion"
msgstr ""

#, python-format
msgid "Invalid used value %s."
msgstr ""

#, python-format
msgid "Invalid increase value %s."
msgstr ""

#, python-format
msgid "Invalid softlimit value %s."
msgstr "Μη αποδεκτό όριο προειδοποίησης %s."

#, python-format
msgid "Invalid hardlimit value %s."
msgstr "Μη αποδεκτό ανώτατο όριο %s."

#, python-format
msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
msgstr "Το ανώτατο όριο  %i είναι μικρότερο από το όριο προειδοποίησης %i, ανταλλαγή τιμών."

#, python-format
msgid "Undefined hard limit set to soft limit (%s)."
msgstr ""

#, python-format
msgid "Undefined soft limit set to hard limit (%s)."
msgstr ""

msgid "Creation"
msgstr ""

#, python-format
msgid "No entry matches %s. Please use pkusers to create them first."
msgstr ""

msgid "Modification"
msgstr ""

msgid "incompatible options, see help."
msgstr "ασύμβατες παράμετροι, διαβάστε τη βοήθεια."

msgid "You have to pass user or group names on the command line"
msgstr "Πρέπει να εισάγετε ονόματα χρηστών ή ομάδων στην γραμμή εντολών"

#, python-format
msgid ""
"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Generates print quota reports.\n"
"\n"
"command line usage :\n"
"\n"
"  repykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints repykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Generates a report on users quota, this is \n"
"                       the default.\n"
"  \n"
"  -g | --groups        Generates a report on group quota instead of users.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Only lists users who are members of these\n"
"                              groups. Reserved to PyKota Administrators.\n"
"  \n"
"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ repykota --printer lp\n"
"  \n"
"  This will print the quota status for all users who use the lp printer.\n"
"\n"
"  $ repykota \n"
"  \n"
"  This will print the quota status for all users on all printers.\n"
"  \n"
"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
"  \n"
"  This will print the quota status for user jerome and all users\n"
"  whose name begins with \"jo\" on all printers which name begins\n"
"  with \"laser\" or ends with \"pson\".\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
msgstr ""

msgid "Option --ingroups is reserved to PyKota Administrators."
msgstr ""

#, python-format
msgid "There's no printer matching %s"
msgstr "Δεν υπάρχει εκτυπωτής που να ταιριάζει στο %s"

#, python-format
msgid ""
"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Sends mail to users over print quota.\n"
"\n"
"command line usage :\n"
"\n"
"  warnpykota  [options]  [names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints warnpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Warns users over their print quota, this is the \n"
"                       default.\n"
"  \n"
"  -g | --groups        Warns users whose groups quota are over limit.\n"
"  \n"
"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ warnpykota --printer lp\n"
"  \n"
"  This will warn all users of the lp printer who have exceeded their\n"
"  print quota.\n"
"\n"
"  $ warnpykota \n"
"  \n"
"  This will warn all users  who have exceeded their print quota on\n"
"  any printer.\n"
"\n"
"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
"  \n"
"  This will warn all users of groups which names begins with \"dev\" and\n"
"  who have exceeded their print quota on any printer which name begins \n"
"  with \"laserjet\"\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
msgstr ""

#, python-format
msgid ""
"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Generates banners.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbanner  [options]  [more info]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbanner's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"                       \n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"  \n"
"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
"                       used to save toner. The default value is 0, which\n"
"                       means that no toner saving will be done.\n"
"  \n"
"  -u | --url u         Uses u as an url to be written at the bottom of \n"
"                       the banner page. The default url is :\n"
"                       http://www.pykota.com/\n"
"  \n"
"examples :                              \n"
"\n"
"  Using pkbanner directly from the command line is not recommended,\n"
"  excepted for testing purposes. You should use pkbanner in the\n"
"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
"  \n"
"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
"  \n"
"      With such a setting in pykota.conf, all print jobs will be \n"
"      prefixed with an A4 banner with no logo, and text luminosity will\n"
"      be increased by 75%%. The PostScript output will be directly sent\n"
"      to your printer.\n"
"      \n"
"  You'll find more examples in the sample configuration file included    \n"
"  in PyKota.\n"
msgstr ""

msgid "Unknown"
msgstr ""

msgid "Username"
msgstr ""

msgid "More Info"
msgstr ""

msgid "Job"
msgstr ""

msgid "Date"
msgstr "Ημερομηνία"

msgid "Allowed"
msgstr ""

msgid "Denied"
msgstr ""

msgid "Allowed with Warning"
msgstr ""

msgid "Problem"
msgstr ""

msgid "Cancelled"
msgstr ""

msgid "Result"
msgstr ""

msgid "Title"
msgstr "Τίτλος"

msgid "Filename"
msgstr "Όνομα αρχείου"

#, python-format
msgid "Pages printed so far on %s"
msgstr ""

msgid "Account balance"
msgstr ""

msgid "Soft Limit"
msgstr ""

msgid "Hard Limit"
msgstr ""

msgid "Date Limit"
msgstr ""

msgid "No Limit"
msgstr ""

msgid "No Accounting"
msgstr ""

msgid "Forbidden"
msgstr ""

msgid "Printing Mode"
msgstr ""

msgid "Allowed range is (0..99)"
msgstr ""

#, python-format
msgid "Invalid 'savetoner' option %s : %s"
msgstr ""

#, python-format
msgid "Invalid 'pagesize' option %s, defaulting to A4."
msgstr ""

#, python-format
msgid ""
"pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A billing codes Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbcodes [options] code1 code2 code3 ... codeN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbcodes version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds billing codes if they don't exist in PyKota's\n"
"                       database. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"\n"
"  -d | --delete        Deletes billing codes from PyKota's database.\n"
"                       NB : the history entries with this billing code\n"
"                       are not deleted, voluntarily.\n"
"\n"
"  -D | --description d Adds a textual description to billing codes.\n"
"\n"
"  -l | --list          List informations about the billing codes.\n"
"\n"
"  -r | --reset         Resets the billing codes' balance and page counters\n"
"                       to 0.\n"
"\n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkbcodes to not modify existing billing codes.\n"
"\n"
"  code1 through codeN can contain wildcards if the --add option\n"
"  is not set.\n"
"\n"
"examples :                              \n"
"\n"
"  $ pkbcodes --add -D \"My project\" myproj\n"
"\n"
"  Will create the myproj billing code with \"My project\"\n"
"  as the description.\n"
"\n"
"  $ pkbcodes --delete \"*\"\n"
"\n"
"  This will completely delete all the billing codes, but without\n"
"  removing any matching job from the history. USE WITH CARE ANYWAY !\n"
"  \n"
"  $ pkbcodes --list \"my*\"\n"
"  \n"
"  This will list all billing codes which name begins with 'my'.\n"
msgstr ""

msgid "You're not allowed to use this command."
msgstr "Απαγορεύεται να χρησιμοποιήσετε αυτή την εντολή"

#, python-format
msgid "There's no billingcode matching %s"
msgstr ""

msgid "pages"
msgstr ""

msgid "and"
msgstr ""

msgid "credits"
msgstr ""

#, python-format
msgid "Billing code [%s] already exists, skipping."
msgstr ""

#, python-format
msgid "Billing code [%s] already exists, will be modified."
msgstr ""

msgid "You have to pass billing codes on the command line"
msgstr ""

#, python-format
msgid ""
"pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An invoice generator for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkinvoice [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkinvoice's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -l | --logo img      Use the image as the invoice's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"                       \n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"                       \n"
"  -n | --number N      Sets the number of the first invoice. This number\n"
"                       will automatically be incremented for each invoice.\n"
"                       \n"
"  -o | --output f.pdf  Defines the name of the invoice file which will\n"
"                       be generated as a PDF document. If not set or\n"
"                       set to '-', the PDF document is sent to standard\n"
"                       output. \n"
"                       \n"
"  -u | --unit u        Defines the name of the unit to use on the invoice.                       \n"
"                       The default unit is 'Credits', optionally translated\n"
"                       to your native language if it is supported by PyKota.\n"
"  \n"
"  -V | --vat p         Sets the percent value of the applicable VAT to be\n"
"                       exposed. The default is 0.0, meaning no VAT\n"
"                       information will be included.\n"
"  \n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         printername    Printer's name\n"
"         hostname       Client's hostname\n"
"         jobid          Job's Id\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Dates formatting with 'start' and 'end' filter keys :\n"
"  \n"
"    YYYY : year boundaries\n"
"    YYYYMM : month boundaries\n"
"    YYYYMMDD : day boundaries\n"
"    YYYYMMDDhh : hour boundaries\n"
"    YYYYMMDDhhmm : minute boundaries\n"
"    YYYYMMDDhhmmss : second boundaries\n"
"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n"
"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
"\n"
"  'now' and 'today' are not exactly the same since today represents the first\n"
"  or last second of the day depending on if it's used in a start= or end=\n"
"  date expression. The utility to be able to specify dates in the future is\n"
"  a question which remains to be answered :-)\n"
"  \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"examples :\n"
"\n"
"  $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n"
"  \n"
"  Will generate a PDF document containing invoices for all users\n"
"  who have spent some credits last month. Invoices will be done in\n"
"  EURO.  No VAT information will be included.\n"
msgstr ""

msgid "Invoice"
msgstr ""

msgid "Edited on"
msgstr ""

msgid "Number of jobs printed"
msgstr ""

msgid "Number of pages printed"
msgstr ""

msgid "Amount due"
msgstr ""

msgid "Included VAT"
msgstr ""

msgid "Here's the invoice for your printouts"
msgstr ""

msgid "Generating invoices"
msgstr ""

#, python-format
msgid "Incorrect value '%s' for the --vat command line option"
msgstr ""

#, python-format
msgid "Incorrect value '%s' for the --number command line option"
msgstr ""

#, python-format
msgid "Invalid filter value [%s], see help."
msgstr ""

#, python-format
msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits"
msgstr ""

msgid "Credits"
msgstr ""

#, python-format
msgid ""
"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Email gateway for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkmail  [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkmail's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"    \n"
"  This command is meant to be used from your mail server's aliases file,\n"
"  as a pipe. It will then accept commands send to it in email messages,\n"
"  and will send the answer to the command's originator.\n"
"  \n"
"  To use this command, create an email alias in /etc/aliases with\n"
"  the following format :\n"
"  \n"
"    pykotacmd: \"|/usr/bin/pkmail\"\n"
"    \n"
"  Then run the 'newaliases' command to regenerate the aliases database.\n"
"  \n"
"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
"  the command in the subject.\n"
"  \n"
"  List of supported commands :\n"
"  \n"
"        report [username]\n"
"  \n"
"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
"  system user in the 'pykota' system group to ensure this user can\n"
"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
"  that you think at least twice before doing this though.\n"
"  \n"
"  Use at your own risk !\n"
msgstr ""

msgid "Result of your commands"
msgstr ""

#, python-format
msgid ""
"pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Notifies or ask questions to end users who launched the PyKotIcon application.\n"
"\n"
"command line usage :\n"
"\n"
"  pknotify  [options]  [arguments]\n"
"\n"
"options :\n"
"\n"
"  -v | --version             Prints pknotify's version number then exits.\n"
"  -h | --help                Prints this message then exits.\n"
"  \n"
"  -d | --destination h[:p]   Sets the destination hostname and optional\n"
"                             port onto which contact the remote PyKotIcon\n"
"                             application. This option is mandatory.\n"
"                             When not specified, the port defaults to 7654.\n"
"                             \n"
"  -a | --ask                 Tells pknotify to ask something to the end\n"
"                             user. Then pknotify will output the result.\n"
"                       \n"
"  -C | --checkauth           When --ask is used and both an 'username' and a\n"
"                             'password' are asked to the end user, then\n"
"                             pknotify will try to authenticate the user\n"
"                             through PAM. If authentified, this program\n"
"                             will print \"AUTH=YES\", else \"AUTH=NO\".\n"
"                             If a field is missing, \"AUTH=IMPOSSIBLE\" will\n"
"                             be printed. If the user is authenticated, then\n"
"                             \"USERNAME=xxxx\" will be printed as well.\n"
"                             \n"
"  -c | --confirm             Tells pknotify to ask for either a confirmation                       \n"
"                             or abortion.\n"
"                             \n"
"  -D | --denyafter N         With --checkauth above, makes pknotify loop                           \n"
"                             up to N times if the password is incorrect.\n"
"                             After having reached the limit, \"DENY\" will\n"
"                             be printed, which effectively rejects the job.\n"
"                             The default value of N is 1, meaning the job\n"
"                             is denied after the first unsuccessful try.\n"
"                             \n"
"  -N | --noremote action     If it's impossible to connect to the remote\n"
"                             PyKotIcon machine, do this action instead.\n"
"                             Allowed actions are 'CONTINUE' and 'CANCEL', \n"
"                             which will respectively allow the processing\n"
"                             of the print job to continue, or the job to\n"
"                             be cancelled. The default value is CANCEL.\n"
"                             \n"
"  -n | --notify              Tells pknotify to send an informational message\n"
"                             to the end user.\n"
"                             \n"
"  -q | --quit                Tells pknotify to send a message asking the\n"
"                             PyKotIcon application to exit. This option can\n"
"                             be combined with the other ones to make PyKotIcon\n"
"                             exit after having sent the answer from the dialog.\n"
"                             \n"
"  -t | --timeout T           Tells pknotify to ignore the end user's answer if\n"
"                             it comes past T seconds after the dialog box being\n"
"                             opened. The default value is 0 seconds, which \n"
"                             tells pknotify to wait indefinitely.\n"
"                             Use this option to avoid having an user who\n"
"                             leaved his computer stall a whole print queue.\n"
"                             \n"
"  You MUST specify either --ask, --confirm, --notify or --quit.\n"
"\n"
"  arguments :             \n"
"  \n"
"    -a | --ask : Several arguments are accepted, of the form\n"
"                 \"label:varname:defaultvalue\". The result will\n"
"                 be printed to stdout in the following format :\n"
"                 VAR1NAME=VAR1VALUE\n"
"                 VAR2NAME=VAR2VALUE\n"
"                 ...\n"
"                 If the dialog was cancelled, nothing will be\n"
"                 printed. If one of the varname is 'password'\n"
"                 then this field is asked as a password (you won't\n"
"                 see what you type in), and is NOT printed. Although\n"
"                 it is not printed, it will be used to check if\n"
"                 authentication is valid if you specify --checkauth.\n"
"                 \n"
"    -c | --confirm : A single argument is expected, representing the\n"
"                     message to display. If the dialog is confirmed\n"
"                     then pknotify will print OK, else CANCEL.\n"
"                     \n"
"    -n | --notify : A single argument is expected, representing the                 \n"
"                    message to display. In this case pknotify will\n"
"                    always print OK.\n"
"                    \n"
"examples :                    \n"
"\n"
"  pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 credits\"\n"
"  \n"
"  Would display the cost of the print job and asks for confirmation.\n"
"  If the end user doesn't have PyKotIcon running and accepting connections\n"
"  from the print server, PyKota will consider that the end user accepted\n"
"  to print this job.\n"
"  \n"
"  pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n"
"           --checkauth --ask \"Your name:username:\" \"Your password:password:\"\n"
"           \n"
"  Asks an username and password, and checks if they are valid.         \n"
"  NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n"
"  only set if you launch pknotify from cupspykota through a directive\n"
"  in ~pykota/pykota.conf\n"
"  \n"
"  The TCP port you'll use must be reachable on the client from the\n"
"  print server.\n"
msgstr ""

msgid "You MUST install PyPAM for this functionnality to work !"
msgstr ""

#, python-format
msgid "Authentication error for user %s : %s"
msgstr ""

#, python-format
msgid "Internal error : can't authenticate user %s"
msgstr ""

#, python-format
msgid "Password correct for user %s"
msgstr ""

#, python-format
msgid "The end user at %s:%i didn't answer within %i seconds. The print job will be cancelled."
msgstr ""

#, python-format
msgid "Are you sure that PyKotIcon is running and accepting incoming connections on %s:%s ?"
msgstr ""

msgid "Connection error"
msgstr ""

msgid "some options are mandatory, see help."
msgstr ""

msgid "incorrect value for the --noremote command line switch, see help."
msgstr ""

msgid "some options require arguments, see help."
msgstr ""

#, python-format
msgid ""
"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A Printers Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds printers if they don't exist on the Quota \n"
"                       Storage Server. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes printers from the quota storage.\n"
"  \n"
"  -D | --description d Adds a textual description to printers.\n"
"\n"
"  -C | --cups          Also modifies the DeviceURI in CUPS' printers.conf\n"
"\n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
"                       Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point and negative values are allowed.\n"
"  \n"
"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
"                       groups pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"                       If the --remove option below is not used, the \n"
"                       default action is to add printers to the specified\n"
"                       printer groups.\n"
"                       \n"
"  -l | --list          List informations about the printer(s) and the\n"
"                       printers groups it is a member of.\n"
"                       \n"
"  -r | --remove        In combination with the --groups option above,                       \n"
"                       remove printers from the specified printers groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkprinters to not modify existing printers.\n"
"                       \n"
"  -m | --maxjobsize s  Sets the maximum job size allowed on the printer\n"
"                       to s pages.\n"
"                       \n"
"  -p | --passthrough   Activate passthrough mode for the printer. In this\n"
"                       mode, users are allowed to print without any impact\n"
"                       on their quota or account balance.\n"
"                       \n"
"  -n | --nopassthrough Deactivate passthrough mode for the printer.\n"
"                       Without -p or -n, printers are created in \n"
"                       normal mode, i.e. no passthrough.\n"
"  \n"
"  printer1 through printerN can contain wildcards if the --add option \n"
"  is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 hp8000\n"
"  \n"
"  Will create three printers named hp2100, hp2200 and hp8000.\n"
"  Their price per page will be set at 0.05 unit, and their price\n"
"  per job will be set at 0.1 unit. Units are in your own currency,\n"
"  or whatever you want them to mean.\n"
"  All of their descriptions will be set to the string \"HP Printer\".\n"
"  If any of these printers already exists, it will also be modified \n"
"  unless the -s|--skipexisting command line option is also used.\n"
"            \n"
"  $ pkprinters --delete \"*\"\n"
"  \n"
"  This will completely delete all printers and associated quota information,\n"
"  as well as their job history. USE WITH CARE !\n"
"  \n"
"  $ pkprinters --groups Laser,HP \"hp*\"\n"
"  \n"
"  This will put all printers which name matches \"hp*\" into printers groups \n"
"  Laser and HP, which MUST already exist.\n"
"  \n"
"  $ pkprinters --groups LexMark --remove hp2200\n"
"  \n"
"  This will remove the hp2200 printer from the LexMark printer group.\n"
msgstr ""

#, python-format
msgid "Passthrough mode : %s"
msgstr ""

#, python-format
msgid "Routed through PyKota : %s"
msgstr ""

msgid "YES"
msgstr ""

msgid "NO"
msgstr ""

msgid "in"
msgstr "σε"

msgid "Rerouting printers to CUPS"
msgstr ""

#, python-format
msgid "Invalid charge amount value %s"
msgstr "Μη αποδεκτό ποσό χρέωσης %s"

#, python-format
msgid "Invalid maximum job size value %s"
msgstr ""

#, python-format
msgid "Printer %s already exists, skipping."
msgstr "Ο εκτυπωτής %s υπάρχει ήδη, παράβλεψη."

#, python-format
msgid "Printer %s already exists, will be modified."
msgstr "Ο εκτυπωτής %s υπάρχει ήδη, θα τροποποιηθεί."

#, python-format
msgid "Invalid printer name %s"
msgstr "Μη αποδεκτό όνομα εκτυπωτή %s"

msgid "You have to pass printer groups names on the command line"
msgstr "Πρέπει να εισάγετε ονόματα ομάδων εκτυπωτών στη γραμμή εντολών"

msgid "You have to pass printer names on the command line"
msgstr "Πρέπει να εισάγετε ονόματα εκτυπωτών στη γραμμή εντολών"

#, python-format
msgid ""
"pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Refunds jobs.\n"
"\n"
"command line usage :\n"
"\n"
"  pkrefund [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkrefund's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -f | --force         Doesn't ask for confirmation before refunding jobs.\n"
"  -r | --reason txt    Sets textual information to explain the refunding.\n"
"\n"
"  -l | --logo img      Use the image as the receipt's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"\n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"\n"
"  -n | --number N      Sets the number of the first receipt. This number\n"
"                       will automatically be incremented for each receipt.\n"
"\n"
"  -o | --output f.pdf  Defines the name of the PDF file which will contain\n"
"                       the receipts. If not set, then no PDF file will\n"
"                       be created. If set to '-', then --force is assumed,\n"
"                       and the PDF document is sent to standard output.\n"
"\n"
"  -u | --unit u        Defines the name of the unit to use on the receipts.\n"
"                       The default unit is 'Credits', optionally translated\n"
"                       to your native language if it is supported by PyKota.\n"
"  \n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         printername    Printer's name\n"
"         hostname       Client's hostname\n"
"         jobid          Job's Id\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Dates formatting with 'start' and 'end' filter keys :\n"
"  \n"
"    YYYY : year boundaries\n"
"    YYYYMM : month boundaries\n"
"    YYYYMMDD : day boundaries\n"
"    YYYYMMDDhh : hour boundaries\n"
"    YYYYMMDDhhmm : minute boundaries\n"
"    YYYYMMDDhhmmss : second boundaries\n"
"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n"
"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
"\n"
"  'now' and 'today' are not exactly the same since today represents the first\n"
"  or last second of the day depending on if it's used in a start= or end=\n"
"  date expression. The utility to be able to specify dates in the future is\n"
"  a question which remains to be answered :-)\n"
"  \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"Examples :\n"
"\n"
"  $ pkrefund --output /tmp/receipts.pdf jobid=503\n"
"  \n"
"  This will refund all jobs which Id is 503. BEWARE : installing CUPS\n"
"  afresh will reset the first job id at 1, so you probably want to use\n"
"  a more precise filter as explained below. A confirmation will\n"
"  be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n"
"  will be created which will contain printable receipts.\n"
"  \n"
"  $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n"
"  \n"
"  Refunds all jobs which id is 503 but which were printed during the\n"
"  past week. The reason will be marked as being an hardware problem.\n"
"  \n"
"  $ pkrefund --force username=jerome printername=HP2100\n"
"  \n"
"  Refunds all jobs printed by user jerome on printer HP2100. No\n"
"  confirmation will be asked.\n"
"  \n"
"  $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n"
"  \n"
"  Refunds all jobs printed on printer HP2100 between February 1st 2006\n"
"  and yesterday. No confirmation will be asked.\n"
msgstr ""

msgid "Refunding receipt"
msgstr ""

msgid "Jobs refunded"
msgstr ""

msgid "Pages refunded"
msgstr ""

msgid "Amount refunded"
msgstr ""

msgid "Reason"
msgstr ""

msgid "Here's the receipt for the refunding of your print jobs"
msgstr ""

msgid "Generating receipts"
msgstr ""

msgid "Refunding for no reason is forbidden. Please use the --reason command line option."
msgstr ""

msgid "The PDF file containing the receipts will be sent to stdout. --force is assumed."
msgstr ""

#, python-format
msgid "Date : %s"
msgstr ""

#, python-format
msgid "JobId : %s"
msgstr ""

#, python-format
msgid "User : %s"
msgstr ""

#, python-format
msgid "Printer : %s"
msgstr ""

#, python-format
msgid "Billing code : %s"
msgstr ""

#, python-format
msgid "Pages : %i"
msgstr ""

#, python-format
msgid "Credits : %.3f"
msgstr ""

#, python-format
msgid "Title : %s"
msgstr ""

msgid "Refund (Y/N)"
msgstr ""

msgid "Y"
msgstr ""

msgid "N"
msgstr ""

#, python-format
msgid "Refunded %i users for %i jobs, %i pages and %.3f credits"
msgstr ""

#, python-format
msgid ""
"pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A turn key tool for PyKota. When launched, this command will initialize\n"
"PyKota's database with all existing print queues and some or all users.\n"
"For now, no prices or limits are set, so printing is fully accounted\n"
"for, but not limited. That's why you'll probably want to also use\n"
"edpykota once the database has been initialized.\n"
"\n"
"command line usage :\n"
"\n"
"  pkturnkey [options] [printqueues names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkturnkey version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --doconf        Give hints about what to put into pykota.conf\n"
"  \n"
"  -d | --dousers       Manages users accounts as well.\n"
"  \n"
"  -D | --dogroups      Manages users groups as well.\n"
"                       Implies -d | --dousers.\n"
"  \n"
"  -e | --emptygroups   Includes empty groups.\n"
"  \n"
"  -f | --force         Modifies the database instead of printing what\n"
"                       it would do.\n"
"                       \n"
"  -u | --uidmin uid    Only adds users whose uid is greater than or equal to\n"
"                       uid. You can pass an username there as well, and its\n"
"                       uid will be used automatically.\n"
"                       If not set, 0 will be used automatically.\n"
"                       Implies -d | --dousers.\n"
"                       \n"
"  -U | --uidmax uid    Only adds users whose uid is lesser than or equal to\n"
"                       uid. You can pass an username there as well, and its\n"
"                       uid will be used automatically.\n"
"                       If not set, a large value will be used automatically.\n"
"                       Implies -d | --dousers.\n"
"\n"
"  -g | --gidmin gid    Only adds groups whose gid is greater than or equal to\n"
"                       gid. You can pass a groupname there as well, and its\n"
"                       gid will be used automatically.\n"
"                       If not set, 0 will be used automatically.\n"
"                       Implies -D | --dogroups.\n"
"                       \n"
"  -G | --gidmax gid    Only adds groups whose gid is lesser than or equal to\n"
"                       gid. You can pass a groupname there as well, and its\n"
"                       gid will be used automatically.\n"
"                       If not set, a large value will be used automatically.\n"
"                       Implies -D | --dogroups.\n"
"\n"
"examples :                              \n"
"\n"
"  $ pkturnkey --dousers --uidmin jerome\n"
"\n"
"  Will simulate the initialization of PyKota's database will all existing\n"
"  printers and print accounts for all users whose uid is greater than\n"
"  or equal to jerome's one. Won't manage any users group.\n"
"  \n"
"  To REALLY initialize the database instead of simulating it, please\n"
"  use the -f | --force command line switch.\n"
"  \n"
"  You can limit the initialization to only a subset of the existing\n"
"  printers, by passing their names at the end of the command line.\n"
msgstr ""

#, python-format
msgid "Printer %s is not managed by PyKota yet. Please modify printers.conf and restart CUPS."
msgstr ""

msgid "Please be patient..."
msgstr ""

msgid "Don't worry, the database WILL NOT BE MODIFIED."
msgstr ""

msgid "Please WORRY NOW, the database WILL BE MODIFIED."
msgstr ""

msgid "System users will have a print account as well !"
msgstr ""

#, python-format
msgid "Unknown username %s : %s"
msgstr ""

msgid "System groups will have a print account as well !"
msgstr ""

#, python-format
msgid "Unknown groupname %s : %s"
msgstr ""

msgid "Simulation terminated."
msgstr ""

msgid "Database initialized !"
msgstr ""

msgid "The --uidmin or --uidmax command line option implies --dousers as well."
msgstr ""

msgid "The --gidmin or --gidmax command line option implies --dogroups as well."
msgstr ""

msgid "The --dogroups command line option implies --dousers as well."
msgstr ""

#, python-format
msgid ""
"pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An Users and Groups Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkusers [options] user1 user2 user3 ... userN\n"
"  \n"
"or :  \n"
"\n"
"  pkusers --groups [options] group1 group2 group3 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkusers's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users if they don't exist on the database.\n"
"                       If they exist, they are modified unless\n"
"                       -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes users from the quota storage.\n"
"\n"
"  -e | --email addr    Sets the email address for the users.\n"
"                       If the addr parameter begins with @, then\n"
"                       the username is prepended to addr to form\n"
"                       a valid email address.\n"
"\n"
"  -D | --description d Adds a textual description to users or groups.\n"
"                       \n"
"  -g | --groups        Edit users groups instead of users.\n"
"                          \n"
"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
"                       when computing the cost of a print job. Positive or \n"
"                       negative floating point values are allowed,\n"
"                       this allows you to do some really creative\n"
"                       things like giving money to an user whenever\n"
"                       he prints. The number of pages in a print job\n"
"                       is not modified by this coefficient, only the\n"
"                       cost of the job for a particular user.\n"
"                       Only users have such a coefficient.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
"                              listed, separated by commas. The groups\n"
"                              must already exist in the Quota Storage.\n"
"                       \n"
"  -L | --list          Lists users or groups.\n"
"  \n"
"  -l | --limitby l     Choose if the user/group is limited in printing                     \n"
"                       by its account balance or by its page quota.\n"
"                       The default value is 'quota'. Allowed values\n"
"                       are 'quota' 'balance' 'noquota' 'noprint' \n"
"                       and 'nochange' :\n"
"                       \n"
"                         - quota : limit by number of pages per printer.\n"
"                         - balance : limit by number of credits in account.\n"
"                         - noquota : no limit, accounting still done.\n"
"                         - nochange : no limit, accounting not done. \n"
"                         - noprint : printing is denied. \n"
"                       NB : nochange and noprint are not supported for groups.\n"
"                       \n"
"  -b | --balance b     Sets the user's account balance to b.                     \n"
"                       Account balance may be increase or decreased\n"
"                       if b is prefixed with + or -.\n"
"                       WARNING : when decreasing account balance,\n"
"                       the total paid so far by the user is decreased\n"
"                       too.\n"
"                       Groups don't have a real balance, but the\n"
"                       sum of their users' account balance.\n"
"                       \n"
"  -C | --comment txt   Defines some informational text to be associated\n"
"                       with a change to an user's account balance.\n"
"                       Only meaningful if -b | --balance is also used.\n"
"                       \n"
"                       \n"
"  -r | --remove        In combination with the --ingroups option above,                       \n"
"                       remove users from the specified users groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkusers to not modify existing users.\n"
"                       \n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkusers --add john paul george ringo/ringo@example.com\n"
"  \n"
"  This will add users john, paul, george and ringo to the quota\n"
"  database. User ringo's email address will also be set to \n"
"  'ringo@example.com'\n"
"  \n"
"  $ pkusers --ingroups coders,it jerome\n"
"  \n"
"  User jerome is put into the groups \"coders\" and \"it\" which must\n"
"  already exist in the quota database.\n"
"            \n"
"  $ pkusers --limitby balance jerome\n"
"  \n"
"  This will tell PyKota to limit jerome by his account's balance\n"
"  when printing.\n"
"  \n"
"  $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n"
"  \n"
"  This will increase jerome's account balance by 10.0 (in your\n"
"  own currency). You can decrease the account balance with a\n"
"  dash prefix, and set it to a fixed amount with no prefix.\n"
"  A comment will be stored for this balance change.\n"
"  \n"
"  $ pkusers --delete jerome rachel\n"
"  \n"
"  This will completely delete jerome and rachel from the quota\n"
"  database. All their quotas and jobs will be deleted too.\n"
"  \n"
"  $ pkusers --overcharge 2.5 poorstudent\n"
"  \n"
"  This will overcharge the poorstudent user by a factor of 2.5.\n"
"  \n"
"  $ pkusers --overcharge -1 jerome\n"
"  \n"
"  User jerome will actually earn money whenever he prints.\n"
"  \n"
"  $ pkusers --overcharge 0 boss\n"
"  \n"
"  User boss can print at will, it won't cost him anything because the\n"
"  cost of each print job will be multiplied by zero before charging\n"
"  his account.\n"
"\n"
"  $ pkusers --email @example.com\n"
"\n"
"  This will set the email address for each user to username@example.com\n"
msgstr ""

#, python-format
msgid "Invalid email address %s"
msgstr "Μη αποδεκτή διεύθυνση e-mail %s"

#, python-format
msgid "There's no %s matching %s"
msgstr ""

#, python-format
msgid "Limited by : %s"
msgstr ""

#, python-format
msgid "Account balance : %.2f"
msgstr ""

#, python-format
msgid "Total paid so far : %.2f"
msgstr ""

#, python-format
msgid "Overcharging factor : %.2f"
msgstr ""

#, python-format
msgid "Group balance : %.2f"
msgstr ""

#, python-format
msgid "Invalid limitby value %s"
msgstr "Μη αποδεκτή τιμή limitby %s"

#, python-format
msgid "Invalid overcharge value %s"
msgstr ""

#, python-format
msgid "Invalid balance value %s"
msgstr "Μη αποδεκτή τιμή υπολοίπου %s"

#, python-format
msgid "There's no users group matching %s"
msgstr ""

#, python-format
msgid "Unknown group %s"
msgstr ""

#, python-format
msgid "Unknown user %s"
msgstr ""

#, python-format
msgid "%s %s already exists, skipping."
msgstr ""

#, python-format
msgid "%s %s already exists, will be modified."
msgstr ""

#, python-format
msgid "Invalid name %s"
msgstr ""

msgid "You have to pass user groups names on the command line"
msgstr ""

#, python-format
msgid ""
"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An OSD quota monitor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pykosd [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykosd's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
"                       triplet, for example #FF0000 is 100%% red.\n"
"                       Defaults to 100%% green (#00FF00).\n"
"                       \n"
"  -d | --duration d    Sets the duration of the display in seconds. \n"
"                       Defaults to 3 seconds.\n"
"                       \n"
"  -f | --font f        Sets the font to use for display.                      \n"
"                       Defaults to the Python OSD library's default.\n"
"  \n"
"  -l | --loop n        Sets the number of times the info will be displayed.\n"
"                       Defaults to 0, which means loop forever.\n"
"                       \n"
"  -s | --sleep s       Sets the sleeping duration between two displays \n"
"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
"                       \n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykosd -s 60 --loop 5\n"
"  \n"
"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
"  and will last for 3 seconds (the default) each time. After five\n"
"  iterations, the program will exit.\n"
msgstr ""

#, python-format
msgid "Invalid duration option %s"
msgstr "Μη αποδεκτή παράμετρος διάρκειας %s"

#, python-format
msgid "Invalid loop option %s"
msgstr "Μη αποδεκτή παράμετρος επανάληψης %s"

#, python-format
msgid "Invalid sleep option %s"
msgstr "Μη αποδεκτή παράμετρος αναμονής %s"

#, python-format
msgid "Invalid color option %s"
msgstr "Μη αποδεκτή παράμετρος χρώματος %s"

#, python-format
msgid "User %s doesn't exist in PyKota's database"
msgstr "Ο χρήστης %s δεν υπάρχει στη βάση δεδομένων του PyKota"

#, python-format
msgid "Pages used on %s : %s"
msgstr "Τυπωμένες σελίδες στον %s : %s"

#, python-format
msgid "PyKota Units left : %.2f"
msgstr "Μονάδες PyKota που απομένουν : %.2f"

msgid "Printing denied."
msgstr ""

msgid "Printing not limited."
msgstr ""

msgid "Printing not limited, no accounting."
msgstr ""

#, python-format
msgid ""
"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Gives print quotes to users.\n"
"\n"
"command line usage :\n"
"\n"
"  pykotme  [options]  [files]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykotme's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykotme --printer apple file1.ps file2.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps and file2.ps \n"
"  which would be sent to the apple printer.\n"
"  \n"
"  $ pykotme --printer apple,hplaser <file1.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps as read from\n"
"  standard input, which would be sent to the apple or hplaser\n"
"  printer.\n"
"\n"
"  $ pykotme \n"
"  \n"
"  This will give a quote for a job consisting of what is on standard \n"
"  input. The quote will list the job size, and the price the job\n"
"  would cost on each printer.\n"
msgstr ""

#, python-format
msgid "Your account balance : %.2f"
msgstr "Το υπόλοιπο του λογαριασμού σας : %.2f"

#, python-format
msgid "Job size : %i pages"
msgstr "Μέγεθος εργασίας : %i σελίδες"

#, python-format
msgid "Cost on printer %s : %.2f"
msgstr "Τιμή στον εκτυπωτή %s : %.2f"

msgid "won't be charged, printer is in passthrough mode"
msgstr ""

msgid "won't be charged, your account is immutable"
msgstr ""

#, python-format
msgid "Unsupported accounter backend %s"
msgstr "Μη υποστηριζόμενη διεπαφή σελιδομετρητή %s"

#, python-format
msgid "Configuration file %s can't be read. Please check that the file exists and that your permissions are sufficient."
msgstr ""

#, python-format
msgid "Configuration file %s not found."
msgstr "Δε βρέθηκε το αρχείο ρυθμίσεων %s."

#, python-format
msgid "Option %s not found in section global of %s"
msgstr "Η παράμετρος %s δε βρέθηκε στην ενότητα global του %s"

#, python-format
msgid "Option %s not found in section %s of %s"
msgstr "Η παράμετρος %s δε βρέθηκε στην ενότητα %s του %s"

#, python-format
msgid "Option ldaptls is set, but certificate %s is not readable."
msgstr ""

#, python-format
msgid "Option logger only supports values in %s"
msgstr "Η παράμετρος logger υποστηρίζει μόνο τις τιμές %s"

#, python-format
msgid "Invalid preaccounter %s for printer %s"
msgstr ""

#, python-format
msgid "Option preaccounter in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Invalid accounter %s for printer %s"
msgstr "Μη αποδεκτός σελιδομετρητής %s για τον εκτυπωτή %s"

#, python-format
msgid "Option accounter in section %s only supports values in %s"
msgstr "Η παράμετρος σελιδομετρητή στην ενότητα %s υποστηρίζει μόνο τις τιμές %s"

#, python-format
msgid "Invalid unknown_billingcode directive %s for printer %s"
msgstr ""

#, python-format
msgid "Directive unknown_billingcode in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option enforcement in section %s only supports values in %s"
msgstr "Η παράμετρος enforcement στην ενότητα %s υποστηρίζει μόνο τις τιμές %s"

#, python-format
msgid "Option onbackenderror in section %s only supports values 'charge', 'nocharge', and 'retry:num:delay'"
msgstr ""

#, python-format
msgid "Option onaccountererror in section %s only supports values in %s"
msgstr "Η επιλογή onaccounterror στο τμήμα %s υποστηρίζει μόνο τις τιμές %s"

#, python-format
msgid "Option policy in section %s only supports values in %s"
msgstr "Η παράμετρος policy στην ενότητα %s υποστηρίζει μόνο τις τιμές %s"

#, python-format
msgid "Invalid option mailto %s for printer %s"
msgstr "Μη αποδεκτή παράμετρος mailto %s για τον εκτυπωτή %s"

#, python-format
msgid "Option mailto in section %s only supports values in %s"
msgstr "Η παράμετρος mailto στην ενότητα  %s υποστηρίζει μόνο τις τιμές %s"

#, python-format
msgid "Invalid maximal deny banners counter %s"
msgstr ""

#, python-format
msgid "Invalid grace delay %s"
msgstr "Μη αποδεκτή περίοδος χάριτος %s"

#, python-format
msgid "Invalid poor man's threshold %s"
msgstr "Μη αποδεκτό κατώφλι poor man's %s"

#, python-format
msgid "Invalid balancezero value %s"
msgstr ""

msgid ""
"Your Print Quota account balance is Low.\n"
"Soon you'll not be allowed to print anymore.\n"
"Please contact the Print Quota Administrator to solve the problem."
msgstr ""
"Το υπόλοιπο του ορίου εκτυπώσεών σας είναι χαμηλό.\n"
"Σύντομα δε θα επιτρέπεται να τυπώσετε πλέον.\n"
"Παρακαλώ επικοινωνήστε με τον διαχειριστή εκτυπώσεων."

#, python-format
msgid ""
"You are not allowed to print anymore because\n"
"your Print Quota is exceeded on printer %s."
msgstr ""
"Δεν επιτρέπεται να εκτυπώσετε πλέον γιατί\n"
"έχετε υπερβεί το όριο εκτυπώσεών σας στον εκτυπωτή %s."

#, python-format
msgid ""
"You will soon be forbidden to print anymore because\n"
"your Print Quota is almost reached on printer %s."
msgstr ""
"Σύντομα δε θα μπορείτε πλέον να τυπώσετε γιατί\n"
"έχετε φτάσει σχεδόν το όριο εκτυπώσεών σας στον εκτυπώτή %s."

#, python-format
msgid "Incorrect value %s for the duplicatesdelay directive in section %s"
msgstr ""

#, python-format
msgid "Incorrect value %s for the noprintingmaxdelay directive in section %s"
msgstr ""

#, python-format
msgid "Option accountbanner in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option trustjobsize for printer %s is incorrect"
msgstr ""

msgid "History"
msgstr "Ιστορικό"

msgid "Users"
msgstr ""

msgid "Groups"
msgstr ""

msgid "Printers"
msgstr ""

msgid "Users Print Quotas"
msgstr ""

msgid "Users Groups Print Quotas"
msgstr ""

msgid "History of Payments"
msgstr ""

msgid "Printers Groups Membership"
msgstr ""

msgid "Users Groups Membership"
msgstr ""

msgid "Billing Codes"
msgstr ""

msgid "All"
msgstr ""

msgid "Comma Separated Values"
msgstr ""

msgid "Semicolon Separated Values"
msgstr ""

msgid "Tabulation Separated Values"
msgstr ""

msgid "eXtensible Markup Language"
msgstr ""

msgid "CUPS' page_log"
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --data command line option, see help."
msgstr "Μη εγκυρος τελεστής [%s] για την παράμετρο --data, δείτε τη βοήθεια."

msgid "Dumping all PyKota's datas forces format to XML, and disables --sum and filters."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --format command line option, see help."
msgstr "Μη εκγυρος τελεστής [%s] για την παράμετρο --format, δείτε τη βοήθεια."

msgid "XML output is disabled because the jaxml module is not available."
msgstr "Η έξοδος σε XML είναι αδύνατη. Δεν υπάρχει η βιβλιοθήκη jaxml."

#, python-format
msgid "Invalid data type [%s] for --sum command line option, see help."
msgstr ""

msgid "PyKota data dumper failed : I/O error"
msgstr "Η έξαγωγή δεδομένων του PyKota απέτυχε : Σφάλμα εισόδου/εξόδου"

#, python-format
msgid "Unsupported logging subsystem %s"
msgstr "Μη υποστηριζόμενο υποσύστημα καταχώρησης %s"

#, python-format
msgid "Report for %s quota on printer %s"
msgstr "Αναφορά για όριο %s στον εκτυπωτή %s"

#, python-format
msgid "Pages grace time: %i days"
msgstr "Περίοδος χάριτος σελίδων: %i μέρες"

#, python-format
msgid "Price per job: %.3f"
msgstr "Τιμή ανά εργασία: %.3f"

#, python-format
msgid "Price per page: %.3f"
msgstr "Τιμή ανά σελίδα: %.3f"

msgid "Group          overcharge   used    soft    hard    balance grace         total       paid warn"
msgstr ""

msgid "User           overcharge   used    soft    hard    balance grace         total       paid warn"
msgstr ""

msgid "unknown"
msgstr "άγνωστο"

#, python-format
msgid "Real : %s"
msgstr "Πραγματικό : %s"

#, python-format
msgid "Total : %9i"
msgstr "Σύνολο : %9i"

msgid "N/A"
msgstr ""

#, python-format
msgid "Unsupported reporter backend %s"
msgstr "Μη υποστηριζόμενη διεπαφή αναφορών %s"

#, python-format
msgid "Refunded %i pages and %.3f credits by %s (%s) on %s"
msgstr ""

#, python-format
msgid "Unsupported quota storage backend %s"
msgstr "Μη υποστηριζόμενη διεπαφή αποθήκευσης %s"

msgid "Done"
msgstr ""

msgid "Average speed"
msgstr ""

msgid "entries per second"
msgstr ""

#, python-format
msgid "Strange problem with uid(%s) : %s"
msgstr ""

#, python-format
msgid "Running as user '%s'."
msgstr ""

msgid "No user named 'pykota'. Not dropping priviledges."
msgstr ""

#, python-format
msgid "Impossible to drop priviledges : %s"
msgstr ""

msgid "Priviledges dropped. Now running as user 'pykota'."
msgstr ""

#, python-format
msgid "Impossible to regain priviledges : %s"
msgstr ""

msgid "Regained priviledges. Now running as root."
msgstr ""

msgid "Please report bugs to :"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Please contact your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""
"\n"
"\n"
"Παρακαλώ επικοινωνήστε με τον διαχειριστή συστήματος :\n"
"\n"
"\t%s - <%s>\n"

#, python-format
msgid "Unable to match user %s on printer %s, applying default policy (%s)"
msgstr "Αδύνατη η εύρεση χρήστη %s στον εκτυπωτή %s, εφαρμογή ερήμην πολιτικής (%s)"

#, python-format
msgid "Unable to find user %s's account balance, applying default policy (%s) for printer %s"
msgstr "Αδύνατη η εύρεση του υπολοίπου του χρήστη %s, εφαρμογή ερήμην πολιτικής (%s)για τον εκτυπωτή %s"

#, python-format
msgid "User %s will not be charged for printing."
msgstr ""

#, python-format
msgid "Print Quota exceeded for group %s on printer %s"
msgstr "Υπέρβαση ορίου εκτυπώσεων για την ομάδα %s στον εκτυπωτή %s"

msgid "Print Quota Exceeded"
msgstr "Υπέρβαση ορίου εκτυπώσεων"

#, python-format
msgid "Print Quota low for group %s on printer %s"
msgstr "Χαμηλό υπόλοιπο εκτυπώσεων για την ομάδα %s στον εκτυπωτή %s"

msgid "Print Quota Low"
msgstr "Χαμηλό υπόλοιπο εκτυπώσεων"

#, python-format
msgid "Search base %s doesn't seem to exist. Probable misconfiguration. Please double check /etc/pykota/pykota.conf : %s"
msgstr "Η βάση αναζήτησης %s δε φαίνεται να υπάρχει. Πιθανό λάθος στις ρυθμίσεις. Παρακαλώ ελέγξτε πάλι το αρχείο /etc/pykota/pykota.conf : %s"

#, python-format
msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
msgstr "Η αναζήτηση του %s(%s) από %s(εύρος=%s) δεν επέστρεψε αποτέλεσμα."

#, python-format
msgid "Problem adding LDAP entry (%s, %s)"
msgstr "Σφάλμα κατά την προσθήκη καταχώρησης LDAP (%s, %s)"

#, python-format
msgid "Problem deleting LDAP entry (%s)"
msgstr "Σφάλμα κατά την διαγραφή καταχώρησης LDAP (%s)"

#, python-format
msgid "Problem modifying LDAP entry (%s, %s)"
msgstr "Σφάλμα κατά την τροποποίηση καταχώρησης LDAP (%s, %s)"

#, python-format
msgid "No pykotaAccountBalance object found for user %s. Did you create LDAP entries manually ?"
msgstr "Δε βρέθηκε αντικείμενο pykotaAccountBalance για τον χρήστη %s. Δημιουργήσατε LDAP καταχωρήσεις χειρωνακτικά ;"

msgid "Hidden because of privacy concerns"
msgstr ""

#, python-format
msgid "Unable to find an existing objectClass %s entry with %s=%s to attach pykotaAccount objectClass"
msgstr "Αδύνατη η εύρεση υπάρχουσας objectClass %s καταχώρησης με %s=%s για προσθήκη pykotaAccount objectClass"

#, python-format
msgid "%s. A new entry will be created instead."
msgstr ""

#, python-format
msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
msgstr "Αδύνατη η εύρεση υπάρχουσας καταχώρησης για την προσθήκη pykotaGroup objectclass %s"

msgid "Your version of python-mysqldb is too old. Please install a newer release."
msgstr ""

#, python-format
msgid "A problem occured while reading printer %s's internal page counter."
msgstr "Ένα πρόβλημα εμφανίστηκε κατά την ανάγνωση του εσωτερικού σελιδομετρητή του εκτυπωτή %s."

#, python-format
msgid "Retrieving printer %s's page counter from database instead."
msgstr "Εξαγωγή σελιδομετρητή του εκτυπωτή %s από τη βάση δεδομένων εναλλακτικά."

#, python-format
msgid "Couldn't retrieve printer %s's internal page counter either before or after printing."
msgstr "Αδύνατη η εξαγωγή του εσωτερικού σελιδομετρητή του εκτυπωτή %s είτε πριν είτε μετά την εκτύπωση."

#, python-format
msgid "Job's size forced to 1 page for printer %s."
msgstr "Το μέγεθος της εργασίας τέθηκε σε 1 σελίδα για τον εκτυπωτή %s."

#, python-format
msgid "No previous job in database for printer %s."
msgstr "Δεν υπάρχει προηγούμενη εργασία στη βάση δεδομένων για τον εκτυπωτή %s."

#, python-format
msgid "Inconsistent values for printer %s's internal page counter."
msgstr "Ασυνάρτητες τιμές για τον εσωτερικό σελιδομετρητή του εκτυπωτή %s."

#, python-format
msgid "Unknown printer address in HARDWARE(%s) for printer %s"
msgstr "Άγνωστη διεύθυνση εκτυπώτή στο HARDWARE(%s) για τον εκτυπωτή %s"

#, python-format
msgid "Launching HARDWARE(%s)..."
msgstr "Εκτέλεση HARDWARE(%s)..."

#, python-format
msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
msgstr "SIGTERM ελήφθη από τον σελιδομετρητή υλικού %s (pid: %s)"

#, python-format
msgid "Line [%s] skipped in accounter's output. Trying again..."
msgstr "Η γραμμή [%s] παραβλέφθηκε στην έξοδο του σελιδομετρητή. Προσπάθεια ξανά..."

#, python-format
msgid "Hardware accounter %s exit code is %s"
msgstr "Η τιμή εξόδου του σελιδομετρητή υλικού %s είναι %s"

#, python-format
msgid "Unable to query printer %s via HARDWARE(%s)"
msgstr "Αδύνατη η επικοινωνία με τον εκτυπωτη %s μέσω HARDWARE(%s)"

#, python-format
msgid "Unable to precompute the job's size and ink coverage with the generic PDL analyzer : %s"
msgstr ""

#, python-format
msgid "Problem during connection to %s:%s : %s"
msgstr "Πρόβλημα κατά τη σύνδεση στον %s:%s : %s"

#, python-format
msgid "Problem while sending PJL query to %s:%s : %s"
msgstr "Πρόβλημα κατά την αποστολή ερώτησης PJL στο %s:%s : %s"

#, python-format
msgid "Problem while receiving PJL answer from %s:%s : %s"
msgstr ""

#, python-format
msgid "Waiting for printer %s to be printing..."
msgstr ""

#, python-format
msgid "Waiting for printer %s's idle status to stabilize..."
msgstr "Αναμονή για σταθεροποίηση της κατάστασης του εκτυπωτή %s..."

#, python-format
msgid "PJL querying stage interrupted. Using latest value seen for internal page counter (%s) on printer %s."
msgstr "Η ερώτηση PJL διακόπηκε. Χρήση τελευταίας τιμής για τον εσωτερικό σελιδομετρητή (%s) του εκτυπωτή %s."

#, python-format
msgid "SNMP querying stage interrupted. Using latest value seen for internal page counter (%s) on printer %s."
msgstr "Η ερώτηση SNMP διακόπηκε. Χρήση τελευταίας τιμής για τον εσωτερικό σελιδομετρητή (%s) του εκτυπωτή %s."

#, python-format
msgid "Network error while doing SNMP queries on printer %s : %s"
msgstr "Σφάλμα δικτύου κατά την SNMP ερώτηση στον εκτυπωτή %s : %s"

#, python-format
msgid "SNMP message decoding error for printer %s : %s"
msgstr ""

#, python-format
msgid "Problem encountered while doing SNMP queries on printer %s : %s"
msgstr "Εμφανίστηκε πρόβλημα κατά την ερώτηση SNMP στον εκτυπωτή %s : %s"

#, python-format
msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
msgstr "Αδύνατος ο προϋπολογισμός της εργασίας με τον αναλυτή PDL : %s"

#, python-format
msgid "Launching SOFTWARE(%s)..."
msgstr "Εκτέλεση SOFTWARE(%s)..."

#, python-format
msgid "Unable to compute job size with accounter %s"
msgstr "Αδύνατος ο υπολογισμός εργασίας με τον σελιδομετρητή %s"

#, python-format
msgid "Problem while waiting for software accounter pid %s to exit : %s"
msgstr "Σφάλμα κατά την αναμονή τερματισμού του σελιδομετρητή λογισμικού pid %s : %s"

#, python-format
msgid "Software accounter %s exit code is %s"
msgstr "Η τιμή εξόδου του σελιδομετρητή λογισμικού %s είναι %s"

msgid "Totals may be inaccurate if some users are members of several groups."
msgstr "Τα σύνολα μπορεί να είναι ανακριβή αν κάποιοι χρήστες είναι μέλη πολλών ομάδων."

msgid "PyKota Data Dumper"
msgstr ""

msgid "Dump"
msgstr ""

msgid "Please click on the above button"
msgstr ""

msgid "Data Type"
msgstr ""

msgid "Output Format"
msgstr ""

msgid "Filter"
msgstr ""

msgid "Summarize"
msgstr ""

msgid "only for payments or history"
msgstr ""

msgid "PyKota Reports"
msgstr "Αναφορές PyKota"

msgid "Report"
msgstr "Αναφορά"

msgid "Printer"
msgstr "Εκτυπωτής"

msgid "User / Group names mask"
msgstr "Μάσκα ονόματος Χρήστη / Ομάδας"

msgid "Groups report"
msgstr "Αναφορά ομάδων"

msgid "Empty"
msgstr "Άδειο"

msgid "Action"
msgstr "Ενέργεια"

msgid "User"
msgstr "Χρήστης"

msgid "Hostname"
msgstr "Όνομα κόμβου"

msgid "JobId"
msgstr "Εργασία"

msgid "Number of pages"
msgstr ""

msgid "Cost"
msgstr ""

msgid "Copies"
msgstr "Αντίγραφα"

msgid "Number of bytes"
msgstr ""

msgid "Printer's internal counter"
msgstr ""

msgid "Options"
msgstr "Παράμετροι"

msgid "MD5Sum"
msgstr ""

msgid "Billing code"
msgstr ""

msgid "Precomputed number of pages"
msgstr ""

msgid "Precomputed cost"
msgstr ""

msgid "Pages details"
msgstr ""

msgid "(not supported yet)"
msgstr ""

msgid "Previous page"
msgstr "Προηγούμενη σελίδα"

msgid "PyKota Quotes"
msgstr ""

msgid "Quote"
msgstr ""

msgid "The exact cost of a print job can only be determined for a particular user. Please retry while logged-in."
msgstr ""

msgid "Ordering"
msgstr ""

#~ msgid "Impossible to add printer %s"
#~ msgstr "Αδύνατη η προσθήκη του εκτυπωτή %s"

#~ msgid "Prototype object %s not found in Quota Storage."
#~ msgstr "Το πρότυπο αντικείμενο %s δε βρέθηκε στη βάση δεδομένων."

#~ msgid "Prototype %s not found in Quota Storage for printer %s."
#~ msgstr "Το πρότυπο %s δε βρέθηκε στη βάση δεδομένων για τον εκτυπωτή %s."

#~ msgid "Undefined hard limit set to soft limit (%s) on printer %s."
#~ msgstr "Αόριστο ανώτατο όριο ορίστηκε στο όριο προειδοποίησης(%s) στον εκτυπωτή %s."

#~ msgid "Undefined soft limit set to hard limit (%s) on printer %s."
#~ msgstr "Αόριστο όριο προειδοποίησης ορίστηκε στο ανώτατο όριο (%s) στον εκτυπωτή %s."

#~ msgid "Invalid group name %s"
#~ msgstr "Μη αποδεκτό όνομα ομάδας %s"

#~ msgid "Invalid user name %s"
#~ msgstr "Μη αποδεκτό όνομα χρήστη %s"

#~ msgid "Quota not found for object %s on printer %s."
#~ msgstr "Δε βρέθηκε όριο για το αντικείμενο %s στον εκτυπωτή %s."

#~ msgid "Group %s not found in the PyKota Storage."
#~ msgstr "Η ομάδα %s δε βρέθηκε στη βάση δεδομένων του PyKota."

#~ msgid "File number %s unregistered twice from polling object, ignored."
#~ msgstr "Το αρχείο με αριθμό %s διαγράφηκε δύο φορές από το αντικείμενο παρακολούθησης, παράβλεψη."

#~ msgid "SIGTERM was sent to real backend %s (pid: %s)"
#~ msgstr "SIGTERM ελήφθη από την πραγματική διεπαφή %s (pid: %s)"

#~ msgid "CUPS backend %s died abnormally."
#~ msgstr "Η διεπαφή CUPS %s τερματίστηκε απρόσμενα."

#~ msgid "Software accounting already done in first pass. Ignoring."
#~ msgstr "Σελιδομέτρηση λογισμικού έγινε ήδη στο πρώτο πέρασμα. Παράβλεψη."

#~ msgid "Hardware accounting already done in first pass. Ignoring."
#~ msgstr "Σελιδομέτρηση υλικού έγινε ήδη στο πρώτο πέρασμα. Παράβλεψη."

#~ msgid "Invalid DeviceURI : %s"
#~ msgstr "Μη αποδεκτό URI συσκευής: %s"

#~ msgid ""
#~ "\n"
#~ "Please wait while pkhint analyzes your printing system's configuration..."
#~ msgstr ""
#~ "\n"
#~ "Παρακαλώ περιμένετε όσο το pkhint αναλύει τις ρυθμίσεις του συστήματος εκτυπώσεων..."

#~ msgid "Unknown device %s for printer %s"
#~ msgstr "Άγνωστη συσκευή %s για τον εκτυπωτή %s"

#~ msgid ""
#~ "\n"
#~ "Put the following lines into your /etc/pykota/pykota.conf file :\n"
#~ msgstr ""
#~ "\n"
#~ "Εισάγετε τις ακόλουθες γραμμές στο αρχείο /etc/pykota/pykota.conf :\n"

#~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
#~ msgstr "# ΠΡΟΣΟΧΗ : αν συνίσταται σελιδομέτρηση λογισμικού, αυτό δε σημαίνει"

#~ msgid "# that hardware accounting wouldn't work, this only means that PyKota"
#~ msgstr "# πως η σελιδομέτρηση υλικού δε δουλεύει, απλά ότι το PyKota"

#~ msgid "# wasn't able to autodetect which hardware accounting method to use."
#~ msgstr "# δε μπόρεσε να εντοπίσει τη μέθοδο σελιδομέτρησης υλικού."

#~ msgid "JobSize"
#~ msgstr "Σελίδες"

#~ msgid "JobPrice"
#~ msgstr "Τιμή"

#~ msgid "JobBytes"
#~ msgstr "Μέγεθος"

#~ msgid "PageCounter"
#~ msgstr "Σελιδομετρητής"

#~ msgid "Printing system %s, args=%s"
#~ msgstr "Σύστημα εκτυπώσεων %s, παράμετροι=%s"

#~ msgid "Printer hostname undefined, set to 'localhost'"
#~ msgstr "Αόριστο όνομα κόμβου εκτυπωτή, χρήση 'localhost'"

#~ msgid "Printing system unknown, args=%s"
#~ msgstr "Άγνωστο σύστημα εκτυπώσεων, παράμετροι=%s"

#~ msgid ""
#~ "autopykota v%s (c) %s %s\n"
#~ "\n"
#~ "A tool to automate user account creation and initial balance setting.\n"
#~ "\n"
#~ "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
#~ "  OF AN external policy IN pykota.conf\n"
#~ "  \n"
#~ "  autopykota { -i | --initbalance value } \n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints autopykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -i | --initbalance b Sets the user's account initial balance value to b.\n"
#~ "                       If the user already exists, actual balance is left\n"
#~ "                       unmodified. If unset, the default value is 0.\n"
#~ "                       \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "autopykota v%s (c) %s %s\n"
#~ "\n"
#~ "Εργαλείο για την αυτοματοποίηση δημιουργίας λογαριασμών χρηστών και αρχικού\n"
#~ "υπολοίπου.\n"
#~ "\n"
#~ "ΑΥΤΟ ΤΟ ΕΡΓΑΛΕΙΟ ΔΕΝ ΠΡΕΠΕΙ ΝΑ ΧΡΗΣΙΜΟΠΟΙΕΙΤΑΙ ΓΙΑ ΤΟΝ ΠΕΡΙΟΡΙΣΜΟ ΤΟΥ ΟΡΙΟΥ\n"
#~ "ΕΚΤΥΠΩΣΗΣ ΤΩΝ ΧΡΗΣΤΩΝ !\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  ΤΟ ΕΡΓΑΛΕΙΟ ΑΥΤΟ ΔΕΝ ΠΡΕΠΕΙ ΝΑ ΧΡΗΣΙΜΟΠΟΙΕΙΤΑΙ ΑΠΟ ΤΗ ΓΡΑΜΜΗ ΕΝΤΟΛΩΝ, ΜΟΝΟ\n"
#~ "  ΩΣ ΜΕΡΟΣ ΜΙΑΣ εξωτερικής πολιτικής (external policy) ΣΤΟ pykota.conf\n"
#~ "  \n"
#~ "  autopykota { -i | --initbalance τιμή } \n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του autopykota και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -i | --initbalance b Θέτει αρχικό υπόλοιπο εκτυπώσεων στην τιμή του b.\n"
#~ "                       Αν ο χρήστης προϋπάρχει, το υπόλοιπο παραμένει\n"
#~ "                       όπως πριν. Αν δεν έχει οριστεί, μηδενίζεται.\n"
#~ "                       \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid ""
#~ "pkhint v%s (c) %s %s\n"
#~ "\n"
#~ "A tool to give hints on what accounting method is best for each printer.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pkhint's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
#~ "  \n"
#~ "  Will analyze your printing system to test which accounter\n"
#~ "  is the best for each of the defined printer which\n"
#~ "  name matches one of the parameters.\n"
#~ "  \n"
#~ "  If you don't pass any argument on the command line, all\n"
#~ "  printers will be analyzed.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pkhint v%s (c) %s %s\n"
#~ "\n"
#~ "Συμβουλευτικό εργαλείο για την καλύτερη μέθοδο σελιδομέτρησης εκτυπωτών.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  pkhint [παράμετροι] [εκτυπωτής1 εκτυπωτής2 ... εκτυπωτήςN] <file.conf\n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του pkhint και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "παραδείγματα :                              \n"
#~ "\n"
#~ "  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
#~ "  \n"
#~ "  Αναλύει το σύστημα εκτυπώσεών σας για να δοκιμάσει ποια μέθοδο\n"
#~ "  σελιδομέτρησης είναι η καλύτερη για καθέναν από τους ορισμένους\n"
#~ "  εκτυπωτές που το όνομά τους ταιριάζει κάποια από τις παραμέτρους.\n"
#~ "  \n"
#~ "  Αν δε δοθεί κανένα όρισμα στη γραμμή εντολών, όλοι οι εκτυπωτές\n"
#~ "  θα αναλυθούν.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid ""
#~ "pkprinters v%s (c) %s %s\n"
#~ "\n"
#~ "A Printers Manager for PyKota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pkprinters's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -a | --add           Adds printers if they don't exist on the Quota \n"
#~ "                       Storage Server. If they exist, they are modified\n"
#~ "                       unless -s|--skipexisting is also used.\n"
#~ "                       \n"
#~ "  -d | --delete        Deletes printers from the quota storage.\n"
#~ "  \n"
#~ "  -D | --description d Adds a textual description to printers.\n"
#~ "                       \n"
#~ "  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
#~ "                       Job price is optional.\n"
#~ "                       If both are to be set, separate them with a comma.\n"
#~ "                       Floating point and negative values are allowed.\n"
#~ "  \n"
#~ "  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
#~ "                       groups pg1, pg2, etc... which must already exist.\n"
#~ "                       A printer group is just like a normal printer,\n"
#~ "                       only that it is usually unknown from the printing\n"
#~ "                       system. Create printer groups exactly the same\n"
#~ "                       way that you create printers, then add other \n"
#~ "                       printers to them with this option.\n"
#~ "                       Accounting is done on a printer and on all\n"
#~ "                       the printer groups it belongs to, quota checking\n"
#~ "                       is done on a printer and on all the printer groups\n"
#~ "                       it belongs to.\n"
#~ "                       If the --remove option below is not used, the \n"
#~ "                       default action is to add printers to the specified\n"
#~ "                       printer groups.\n"
#~ "                       \n"
#~ "  -l | --list          List informations about the printer(s) and the\n"
#~ "                       printers groups it is a member of.\n"
#~ "                       \n"
#~ "  -r | --remove        In combination with the --groups option above,                       \n"
#~ "                       remove printers from the specified printers groups.\n"
#~ "                       \n"
#~ "  -s | --skipexisting  In combination with the --add option above, tells\n"
#~ "                       pkprinters to not modify existing printers.\n"
#~ "  \n"
#~ "  printer1 through printerN can contain wildcards if the --add option \n"
#~ "  is not set.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 hp8000\n"
#~ "  \n"
#~ "  Will create three printers named hp2100, hp2200 and hp8000.\n"
#~ "  Their price per page will be set at 0.05 unit, and their price\n"
#~ "  per job will be set at 0.1 unit. Units are in your own currency,\n"
#~ "  or whatever you want them to mean.\n"
#~ "  All of their descriptions will be set to the string \"HP Printer\".\n"
#~ "  If any of these printers already exists, it will also be modified \n"
#~ "  unless the -s|--skipexisting command line option is also used.\n"
#~ "            \n"
#~ "  $ pkprinters --delete \"*\"\n"
#~ "  \n"
#~ "  This will completely delete all printers and associated quota information,\n"
#~ "  as well as their job history. USE WITH CARE !\n"
#~ "  \n"
#~ "  $ pkprinters --groups Laser,HP \"hp*\"\n"
#~ "  \n"
#~ "  This will put all printers which name matches \"hp*\" into printers groups \n"
#~ "  Laser and HP, which MUST already exist.\n"
#~ "  \n"
#~ "  $ pkprinters --groups LexMark --remove hp2200\n"
#~ "  \n"
#~ "  This will remove the hp2200 printer from the LexMark printer group.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pkprinters v%s (c) %s %s\n"
#~ "\n"
#~ "Διαχειριστής εκτυπωτών για το PyKota.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  pkprinters [παράμετροι] εκτυπωτής1 εκτυπωτής2 ... εκτυπωτήςN\n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του pkprinters και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -a | --add           Προσθέτει εκτυπωτές αν δεν υπάρχουν στη βάση\n"
#~ "                       δεδομένων. Αν υπάρχουν, μεταβάλλονται, εκτός\n"
#~ "                       αν χρησιμοποιηθει και η παράμετρος -s|--skipexisting.\n"
#~ "                       \n"
#~ "  -d | --delete        Διαγράφει εκτυπωτές από τη βάση δεδομένων ορίων.\n"
#~ "  \n"
#~ "  -D | --description   Προσθέτει μια περιγραφή κειμένου σε εκτυπωτές.\n"
#~ "                       \n"
#~ "  -c | --charge p[,j]  Θέτει την τιμή χρέωσης ανά σελίδα και ανά εργασία.\n"
#~ "                       Η τιμή εργασίας είναι προαιρετική.\n"
#~ "                       Αν οριστούν και οι δύο, πρέπει να διαχωριστούν με\n"
#~ "                       κόμμα.\n"
#~ "                       Επιτρέπονται δεκαδικές όπως και αρνητικές τιμές.\n"
#~ "  \n"
#~ "  -g | --groups pg1[,pg2...] Προσθέτει ή αφαιρεί τον/τους εκτυπωτή/ές\n"
#~ "                       στις ομάδες εκτυπωτών pg1, pg2, κ.λ.π οι οποίες\n"
#~ "                       πρέπει να προϋπάρχουν. Μια ομάδα εκτυπωτών είναι\n"
#~ "                       σαν ένας κανονικός εκτυπωτής, αλλά συνήθως δεν\n"
#~ "                       είναι γνωστή στο σύστημα εκτυπώσεων. Δημιουργήστε\n"
#~ "                       ομάδες εκτυπωτών με τον ίδιο τρόπο που δημιουργείτε\n"
#~ "                       εκτυπωτές, μετά προσθέστε άλλους εκτυπωτές σε αυτές\n"
#~ "                       με αυτή την παράμετρο. Σελιδομέτρηση και έλεγχος\n"
#~ "                       ορίων εκτύπωσης γίνεται στον εκτυπωτή και σε όλες\n"
#~ "                       τις ομάδες εκτυπωτών στις οποίες ανήκει.\n"
#~ "                       Αν δεν χρησιμοποιηθεί η παρακάτω παράμετρος\n"
#~ "                       --remove, η προεπιλογή είναι η πρόσθεση εκτυπωτών\n"
#~ "                       στις συγκεκριμένες ομάδες εκτυπωτών\n"
#~ "                       \n"
#~ "  -l | --list          Εμφάνιση πληροφοριών σχετικά με τον/τους εκτυπωτή/ές\n"
#~ "                       και τις ομάδες εκτυπωτών στις οποίες ανήκει.\n"
#~ "                       \n"
#~ "  -r | --remove        Σε συνδυασμό με την παράμετρο --groups παραπάνω,\n"
#~ "                       αφαιρεί εκτυπωτές από τις δεδομένες ομάδες\n"
#~ "                       εκτυπωτών.\n"
#~ "                       \n"
#~ "  -s | --skipexisting  Σε συνδυασμό με την παράμετρο --add παραπάνω, δεν\n"
#~ "                       επιτρέπει στο pkprinters να μεταβάλλει υπάρχοντες\n"
#~ "                       εκτυπωτές.\n"
#~ "  \n"
#~ "  Οι παράμετροι εκτυπωτής1 εως εκτυπωτήςN μπορεί να περιέχουν μπαλαντέρ\n"
#~ "  αν δεν οριστεί η παράμετρος --add.\n"
#~ "  \n"
#~ "παράμετροι :                              \n"
#~ "\n"
#~ "  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 hp8000\n"
#~ "  \n"
#~ "  Δημιουργεί τρεις εκτυπωτές με ονόματα hp2100, hp2200 και hp8000.\n"
#~ "  Η τιμή τους ανά σελίδα ορίζεται σε 0.05 μονάδες, και η τιμή τους\n"
#~ "  ανά εργασία στις 0.1 μονάδες. Η μέτρηση μονάδων γίνεται στο τρέχον\n"
#~ "  νόμισμα αλλά μπορούν να έχουν και οποιαδήποτε άλλη σημασία.\n"
#~ "  Όλες οι περιγραφές τους ορίζονται στη συμβολοσειρά \"HP Printer\".\n"
#~ "  Αν οποιοσδήποτε από τους εκτυπωτές υπάρχει ήδη, θα μεταβληθεί\n"
#~ "  εκτός αν χρησιμοποιηθεί και η παράμετρος -s|--skipexisting.\n"
#~ "            \n"
#~ "  $ pkprinters --delete \"*\"\n"
#~ "  \n"
#~ "  Διαγράφει τελείως όλους τους εκτυπωτές και την πληροφορία τους για\n"
#~ "  όρια εκτυπώσεων, όπως και την ιστορία εργασιών τους.\n"
#~ "  ΧΡΗΣΙΜΟΠΟΙΗΣΤΕ ΜΕ ΠΡΟΣΟΧΗ !\n"
#~ "  \n"
#~ "  $ pkprinters --groups Laser,HP \"hp*\"\n"
#~ "  \n"
#~ "  Εισάγει όλους τους εκτυπωτές με ονόματα που ταιριάζουν με \"hp*\" \n"
#~ "  στις ομάδες εκτυπωτών Laser και HP, που ΠΡΕΠΕΙ να προϋπάρχουν.\n"
#~ "  \n"
#~ "  $ pkprinters --groups LexMark --remove hp2200\n"
#~ "  \n"
#~ "  Διαγράφει τον εκτυπωτή hp2200 από την ομάδα εκτυπωτών LexMark.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid ""
#~ "pykosd v%s (c) %s %s\n"
#~ "\n"
#~ "An OSD quota monitor for PyKota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pykosd [options]\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pykosd's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
#~ "                       triplet, for example #FF0000 is 100%% red.\n"
#~ "                       Defaults to 100%% green (#00FF00).\n"
#~ "                       \n"
#~ "  -d | --duration d    Sets the duration of the display in seconds. \n"
#~ "                       Defaults to 3 seconds.\n"
#~ "                       \n"
#~ "  -f | --font f        Sets the font to use for display.                      \n"
#~ "                       Defaults to the Python OSD library's default.\n"
#~ "  \n"
#~ "  -l | --loop n        Sets the number of times the info will be displayed.\n"
#~ "                       Defaults to 0, which means loop forever.\n"
#~ "                       \n"
#~ "  -s | --sleep s       Sets the sleeping duration between two displays \n"
#~ "                       in seconds. Defaults to 180 seconds (3 minutes).\n"
#~ "                       \n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pykosd -s 60 --loop 5\n"
#~ "  \n"
#~ "  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
#~ "  and will last for 3 seconds (the default) each time. After five\n"
#~ "  iterations, the program will exit.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pykosd v%s (c) %s %s\n"
#~ "\n"
#~ "Παρακολούθηση του PyKota με απεικόνιση εντός οθόνης (OSD).\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  pykosd [παράμετροι]\n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκοδοση του pykosd και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -c | --color #rrggbb Ορίζει το χρώμα της απεικόνισης σε μια τριάδα\n"
#~ "                       δεκαεξαδικών αριθμών, για παράδειγμα #FF0000 είναι\n"
#~ "                       100%% κόκκινο.\n"
#~ "                       Προεπιλεγμένο χρώμα είναι το 100%% πράσινο (#00FF00).\n"
#~ "                       \n"
#~ "  -d | --duration d    Θέτει τη διάρκεια της απεικόνισης σε δευτερόλεπτα. \n"
#~ "                       Προεπιλεγμένος χρόνος είναι τα 3 δευτερόλεπτα.\n"
#~ "                       \n"
#~ "  -f | --font f        Ορίζει τη γραμματοσειρά για χρήση στην απεικόνιση\n"
#~ "                       Προεπιλογή είναι η ρύθμιση της βιβλιοθήκης OSD της Python.\n"
#~ "  \n"
#~ "  -l | --loop n        Ορίζει τον αριθμό των φορών που θα εμφανιστεί η πληροφορία.\n"
#~ "                       Προεπιλογή είναι το 0, που σημαίνει άπειρες φορές.\n"
#~ "                       \n"
#~ "  -s | --sleep s       Ορίζει το χρόνο αναμονής μεταξύ δύο απεικονίσεων\n"
#~ "                       σε δευτερόλεπτα. Προεπιλογή τα 180 δευτερόλεπτα (3 λεπτά).\n"
#~ "                       \n"
#~ "  \n"
#~ "παραδείγματα :                              \n"
#~ "\n"
#~ "  $ pykosd -s 60 --loop 5\n"
#~ "  \n"
#~ "  Εκτελεί το pykosd. Η απεικόνιση θα ενημερώνεται κάθε 60 δευτερόλεπτα,\n"
#~ "  και θα διαρκεί για 3 δευτερόλεπτα (προεπιλογή) κάθε φορά. Μετά από\n"
#~ "  πέντε επαναλήψεις, το πρόγραμμα θα τερματίσει.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid ""
#~ "pykotme v%s (c) %s %s\n"
#~ "\n"
#~ "Gives print quotes to users.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pykotme  [options]  [files]\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pykotme's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers.\n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pykotme --printer apple file1.ps file2.ps\n"
#~ "  \n"
#~ "  This will give a print quote to the current user. The quote will show\n"
#~ "  the price and size of a job consisting in file1.ps and file2.ps \n"
#~ "  which would be sent to the apple printer.\n"
#~ "  \n"
#~ "  $ pykotme --printer apple,hplaser <file1.ps\n"
#~ "  \n"
#~ "  This will give a print quote to the current user. The quote will show\n"
#~ "  the price and size of a job consisting in file1.ps as read from\n"
#~ "  standard input, which would be sent to the apple or hplaser\n"
#~ "  printer.\n"
#~ "\n"
#~ "  $ pykotme \n"
#~ "  \n"
#~ "  This will give a quote for a job consisting of what is on standard \n"
#~ "  input. The quote will list the job size, and the price the job\n"
#~ "  would cost on each printer.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pykotme v%s (c) %s %s\n"
#~ "\n"
#~ "Εμφανίζει πληροφορίες για τις εκτυπώσεις στους χρήστες.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  pykotme  [παράμετροι]  [αρχεία]\n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του pykotme και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -P | --printer p     Εμφανίζει πληροφορίες μόνο για αυτό τον εκτυπωτή.\n"
#~ "                       Ο p μπορεί να περιέχει μπαλαντέρ για να επιλεγούν\n"
#~ "                       μόνο κάποιοι εκτυπωτές. Η προεπιλογή είναι *,\n"
#~ "                       που σημαίνει όλοι οι εκτυπωτές.\n"
#~ "                       Μπορείτε να εισάγετε πολλά ονόματα ή μπαλαντέρ, \n"
#~ "                       χωρίζοντάς τα με κόμματα.\n"
#~ "  \n"
#~ "παραδείγματα :                              \n"
#~ "\n"
#~ "  $ pykotme --printer apple file1.ps file2.ps\n"
#~ "  \n"
#~ "  Εμφανίζει πληροφορία εκτύπωσης στον τρέχοντα χρήστη. Η πληροφορία θα\n"
#~ "  εμφανίζει την τιμή και το μέγεθος μιας εργασίας που αποτελείται από\n"
#~ "  τα αρχεία file1.ps και file2.ps που θα αποστάλλούν στον εκτυπωτή\n"
#~ "  apple.\n"
#~ "  \n"
#~ "  $ pykotme --printer apple,hplaser <file1.ps\n"
#~ "  \n"
#~ "  Εμφανίζει πληροφορία εκτύπωσης στον τρέχοντα χρήστη. Η πληροφορία θα\n"
#~ "  εμφανίζει την τιμή και το μέγεθος μιας εργασίας που αποτελείται από\n"
#~ "  το αρχείο file1.ps όπως διαβάζεται από την είσοδο, που θα\n"
#~ "  αποσταλεί στον εκτυπωτή apple ή τον εκτυπωτή hplaser.\n"
#~ "\n"
#~ "  $ pykotme \n"
#~ "  \n"
#~ "  Εμφανίζει πληροφορία εκτύπωσης για μια εργασία που αποτελείται από\n"
#~ "  ό,τι υπάρχει στην είσοδο. Η πληροφορία θα περιέχει το μέγεθος της\n"
#~ "  εργασίας και την τιμή που θα κόστιζε σε κάθε εκτυπωτή.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid ""
#~ "repykota v%s (c) %s %s\n"
#~ "\n"
#~ "Generates print quota reports.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  repykota [options] \n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints repykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -u | --users         Generates a report on users quota, this is \n"
#~ "                       the default.\n"
#~ "  \n"
#~ "  -g | --groups        Generates a report on group quota instead of users.\n"
#~ "  \n"
#~ "  -P | --printer p     Report quotas on this printer only. Actually p can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers.\n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ repykota --printer lp\n"
#~ "  \n"
#~ "  This will print the quota status for all users who use the lp printer.\n"
#~ "\n"
#~ "  $ repykota \n"
#~ "  \n"
#~ "  This will print the quota status for all users on all printers.\n"
#~ "  \n"
#~ "  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
#~ "  \n"
#~ "  This will print the quota status for user jerome and all users\n"
#~ "  whose name begins with \"jo\" on all printers which name begins\n"
#~ "  with \"laser\" or ends with \"pson\".\n"
#~ "  \n"
#~ "  If launched by an user who is not a PyKota administrator, additionnal\n"
#~ "  arguments representing users or groups names are ignored, and only the\n"
#~ "  current user/group is reported.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "repykota v%s (c) %s %s\n"
#~ "\n"
#~ "Παράγει αναφορές ορίων εκτυπώσεων.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  repykota [παράμετροι] \n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του repykota και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -u | --users         Παράγει μια αναφορά με τα όρια εκτυπώσεων των\n"
#~ "                       χρηστών. Αυτή είναι η προεπιλογή.\n"
#~ "  \n"
#~ "  -g | --groups        Παράγει μια αναφορά με το όρια εκτυπώσεων ομάδων\n"
#~ "                       ορίων αντί για χρηστών.\n"
#~ "  \n"
#~ "  -P | --printer p     Αναφέρει όρια μόνο σε αυτό τον εκτυπωτή. Η\n"
#~ "                       παράμετρος p μπορεί να περιέχει μπαλαντέρ για να\n"
#~ "                       επιλεγούν μόνο κάποιοι εκτυπωτές.\n"
#~ "                       Η προεπιλογη είναι *, δηλαδή όλοι οι εκτυπωτές.\n"
#~ "                       Μπορείτε να ορίσετε πολλά ονόματα ή μπαλαντέρ,\n"
#~ "                       διαχωρίζοντάς τα με κόμματα.\n"
#~ "  \n"
#~ "παραδείγματα :                              \n"
#~ "\n"
#~ "  $ repykota --printer lp\n"
#~ "  \n"
#~ "  Εμφανίζει την κατάσταση ορίων εκτυπώσεων για όλους τους χρήστες που\n"
#~ "  χρησιμοποιούν τον εκτυπωτή lp.\n"
#~ "\n"
#~ "  $ repykota \n"
#~ "  \n"
#~ "  Εμφανίζει την κατάσταση ορίων εκτυπώσεων για όλους τους χρήστες σε\n"
#~ "  όλους τους εκτυπωτές.\n"
#~ "  \n"
#~ "  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
#~ "  \n"
#~ "  Εμφανίζει την κατάσταση ορίων εκτυπώσεων για το χρήστη jerome και\n"
#~ "  όλους τους χρήστες που το όνομά τους αρχίζει από \"jo\" σε όλους\n"
#~ "  τους εκτυπωτές που το όνομά τους αρχίζει από \"laser\" ή τελειώνει\n"
#~ "  σε \"pson\".\n"
#~ "  \n"
#~ "  Αν εκτελεστεί από χρήστη που δεν είναι διαχειριστής του PyKota, επιπλέον\n"
#~ "  παράμετροι για χρήστες ή ονόματα ομάδων παραβλέπονται, και μόνο ο\n"
#~ "  τρέχων χρήστης/τρέχουσα ομάδα αναφέρονται.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid ""
#~ "warnpykota v%s (c) %s %s\n"
#~ "\n"
#~ "Sends mail to users over print quota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  warnpykota  [options]  [names]\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints warnpykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -u | --users         Warns users over their print quota, this is the \n"
#~ "                       default.\n"
#~ "  \n"
#~ "  -g | --groups        Warns users whose groups quota are over limit.\n"
#~ "  \n"
#~ "  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers.\n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ warnpykota --printer lp\n"
#~ "  \n"
#~ "  This will warn all users of the lp printer who have exceeded their\n"
#~ "  print quota.\n"
#~ "\n"
#~ "  $ warnpykota \n"
#~ "  \n"
#~ "  This will warn all users  who have exceeded their print quota on\n"
#~ "  any printer.\n"
#~ "\n"
#~ "  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
#~ "  \n"
#~ "  This will warn all users of groups which names begins with \"dev\" and\n"
#~ "  who have exceeded their print quota on any printer which name begins \n"
#~ "  with \"laserjet\"\n"
#~ "  \n"
#~ "  If launched by an user who is not a PyKota administrator, additionnal\n"
#~ "  arguments representing users or groups names are ignored, and only the\n"
#~ "  current user/group is reported.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "warnpykota v%s (c) %s %s\n"
#~ "\n"
#~ "Στέλνει email σε χρήστες που έχουν υπερβεί το όριο εκτυπώσεων.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  warnpykota  [παράμετροι]  [ονόματα]\n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του warnpykota και τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -u | --users         Προειδοποιεί τους χρήστες σχετικά με το όριο\n"
#~ "                       εκτυπώσεών τους. Αυτή είναι η προεπιλογή.\n"
#~ "  \n"
#~ "  -g | --groups        Προειδοποιεί τους χρήστες που έχουν υπερβεί τα όρια ομάδας.\n"
#~ "  \n"
#~ "  -P | --printer p     Επαληθεύει τα όρια στο συγκεκριμένο εκτυπωτή. Η παράμετρος\n"
#~ "                       p μπορεί να χρησιμοποιεί μπαλαντέρ για να επιλεγούν μόνο\n"
#~ "                       κάποιοι εκτυπωτές. Η προεπιλεγμένη τιμή είναι *, που\n"
#~ "                       σημαίνει όλοι οι εκτυπωτές.\n"
#~ "                       Μπορείτε να ορίσετε πολλά ονόματα ή μπαλαντέρ, με τη\n"
#~ "                       χρήση διαχωριστικών κομμάτων.\n"
#~ "  \n"
#~ "παραδείγματα :                              \n"
#~ "\n"
#~ "  $ warnpykota --printer lp\n"
#~ "  \n"
#~ "  Προειδοποιεί όλους τους χρήστες του εκτυπωτή lp που έχουν υπερβεί τα\n"
#~ "  όρια εκτυπώσεών τους.\n"
#~ "\n"
#~ "  $ warnpykota \n"
#~ "  \n"
#~ "  Προειδοποιεί όλους τους χρήστες που έχουν υπερβεί τα όρια εκτυπώσεών\n"
#~ "  τους σε οποιονδήποτε εκτυπωτή.\n"
#~ "\n"
#~ "  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
#~ "  \n"
#~ "  Προειδοποιεί όλους τους χρήστες των ομάδων με ονόματα που αρχίζουν από\n"
#~ "  \"dev\" οι οποίοι έχουν υπερβεί το όριο εκτυπώσεών τους σε οποιονδήποτε\n"
#~ "  εκτυπωτή που το όνομά του αρχίζει από  \"laserjet\"\n"
#~ "  \n"
#~ "  Αν εκτελεστεί από χρήστη που δεν είναι διαχειριστής του PyKota, οι\n"
#~ "  παράμετροι που αναφέρονται σε χρήστες ή ομάδες παραλείπονται, και\n"
#~ "  αναφέρονται μόνο πληροφορίες που αφορούν τον τρέχοντα χρήστη/ομάδα.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid "Internal SNMP accounting asked, but Python-SNMP is not available. Please download it from http://pysnmp.sourceforge.net"
#~ msgstr "Ζητήθηκε σελιδομέτρηση με SNMP, αλλά η βιβλιοθήκη Python-SNMP δεν είναι διαθέσιμη. Παρακαλώ κατεβάστε την από http://pysnmp.sourceforge.net"

#~ msgid ""
#~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
#~ "\n"
#~ "Dumps PyKota database's content.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  dumpykota [options] \n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints dumpykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
#~ "                       \n"
#~ "                         - history : dumps the jobs history.\n"
#~ "                         - users : dumps users.\n"
#~ "                         - groups : dumps user groups.\n"
#~ "                         - printers : dump printers.\n"
#~ "                         - upquotas : dump user quotas.\n"
#~ "                         - gpquotas : dump user groups quotas.\n"
#~ "                         - payments : dumps user payments.\n"
#~ "                         - pmembers : dumps printer groups members.\n"
#~ "                         - umembers : dumps user groups members.\n"
#~ "                         \n"
#~ "                       NB : the -d | --data command line option   \n"
#~ "                       is MANDATORY.\n"
#~ "  \n"
#~ "  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
#~ "                       the format is to dump datas in the csv format (comma\n"
#~ "                       separated values). All data dumped is between double\n"
#~ "                       quotes. Allowed formats are :\n"
#~ "                       \n"
#~ "                         - csv : separate datas with commas\n"
#~ "                         - ssv : separate datas with semicolons\n"
#~ "                         - tsv : separate datas with tabs\n"
#~ "                         - xml : dump data as XML\n"
#~ "                         \n"
#~ "  -o | --output fname  All datas will be dumped to the file instead of\n"
#~ "                       to the standard output. The special '-' filename\n"
#~ "                       is the default value and means stdout.\n"
#~ "                       WARNING : existing files are truncated !\n"
#~ "  \n"
#~ "Examples :\n"
#~ "\n"
#~ "  $ dumpykota --data history --format csv >myfile.csv\n"
#~ "  \n"
#~ "  This dumps the history in a comma separated values file, for possible\n"
#~ "  use in a spreadsheet.\n"
#~ "  \n"
#~ "  $ dumpykota --data users --format xml -o users.xml\n"
#~ "  \n"
#~ "  Dumps all users datas to the users.xml file.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
#~ "\n"
#~ "Εμφανίζει το περιεχόμενο της βάσης δεδομένων PyKota.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  dumpykota [παράμετροι] \n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του dumpykotaκαι τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -d | --data type     Εμφανίζει δεδομένα 'τύπου'. Επιτρεπόμενοι τύποι :\n"
#~ "                       \n"
#~ "                         - history : εμφανίζει την ιστορία εργασιών.\n"
#~ "                         - users : εμφανίζει χρήστες.\n"
#~ "                         - groups : εμφανίζει ομάδες χρηστών.\n"
#~ "                         - printers : εμφανίζει εκτυπωτές.\n"
#~ "                         - upquotas : εμφανίζει όρια χρηστών.\n"
#~ "                         - gpquotas : εμφανίζει όρια ομάδων χρηστών.\n"
#~ "                         - payments : εμφανίζει εξοφλήσεις χρηστών.\n"
#~ "                         - pmembers : εμφανίζει μέλη ομάδων εκτυπωτών.\n"
#~ "                         - umembers : εμφανίζει μέλη ομάδων χρηστών.\n"
#~ "                         \n"
#~ "                       Προσοχή : η παράμετρος -d | --data είναι ΥΠΟΧΡΕΩΤΙΚΗ\n"
#~ "  \n"
#~ "  -f | --format fmt    Εμφανίζει δεδομένα σε συγκεκριμένη μορφή. Όταν δεν\n"
#~ "                       ορίζεται, η μορφή είναι η csv (τιμές διαχωρισμένες\n"
#~ "                       με κόμματα). Όλα τα δεδομένα που εμφανίζονται\n"
#~ "                       εσωκλείονται σε διπλά εισαγωγικά.\n"
#~ "                       Επιτρεπόμενες μορφές δεδομένων είναι :\n"
#~ "                       \n"
#~ "                         - csv : διαχώριση δεδομένων με κόμματα\n"
#~ "                         - ssv : διαχώριση δεδομένων με ελληνικό ερωτηματικό\n"
#~ "                         - tsv : διαχώριση δεδομένων με στηλοθέτες (tabs)\n"
#~ "                         - xml : εμφάνιση δεδομένων ως XML\n"
#~ "                         \n"
#~ "  -o | --output όνομα  Όλα τα δεδομένα θα γραφούν στο αρχείο με όνομα 'όνομα'\n"
#~ "                       αντί να εμφανιστούν στην έξοδο της γραμμής εντολών.\n"
#~ "                       Η ειδική τιμή '-' για όνομα αρχείου είναι η προεπιλογή\n"
#~ "                       και σημαίνει εμφάνιση στην έξοδο της γραμμής εντολών.\n"
#~ "                       ΠΡΟΣΟΧΗ: τα υπάρχοντα αρχεία αντικαθίστανται !\n"
#~ "  \n"
#~ "Παραδείγματα :\n"
#~ "\n"
#~ "  $ dumpykota --data history --format csv >myfile.csv\n"
#~ "  \n"
#~ "  Γράφει την ιστορία των εργασιών σε ένα αρχείο με διαχωριστικά κόμματα,\n"
#~ "  για πιθανή χρήση σε ένα λογιστικό φύλλο.\n"
#~ "  \n"
#~ "  $ dumpykota --data users --format xml -o users.xml\n"
#~ "  \n"
#~ "  Γράφει όλα τα δεδομένα των χρηστών στο αρχείο users.xml .\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid "Too many arguments, see help."
#~ msgstr "Υπερβολικά πολλές παράμετροι, δείτε τη βοήθεια."

#~ msgid ""
#~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
#~ "A Print Quota editor for PyKota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  edpykota [options] user1 user2 ... userN\n"
#~ "  \n"
#~ "  edpykota [options] group1 group2 ... groupN\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints edpykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -a | --add           Adds users and/or printers if they don't \n"
#~ "                       exist on the Quota Storage Server.\n"
#~ "                       \n"
#~ "  -d | --delete        Deletes users/groups from the quota storage.\n"
#~ "                       Printers are never deleted.\n"
#~ "                       \n"
#~ "  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
#~ "                       for a particular printer. Job price is optional.\n"
#~ "                       If both are to be set, separate them with a comma.\n"
#~ "                       Floating point values are allowed.\n"
#~ "  \n"
#~ "  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
#~ "                              listed, separated by commas. The groups\n"
#~ "                              must already exist in the Quota Storage.\n"
#~ "  \n"
#~ "  -u | --users         Edit users print quotas, this is the default.\n"
#~ "  \n"
#~ "  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers. \n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
#~ "                       pg1, pg2, etc... which must already exist.\n"
#~ "                       A printer group is just like a normal printer,\n"
#~ "                       only that it is usually unknown from the printing\n"
#~ "                       system. Create printer groups exactly the same\n"
#~ "                       way that you create printers, then add other \n"
#~ "                       printers to them with this option.\n"
#~ "                       Accounting is done on a printer and on all\n"
#~ "                       the printer groups it belongs to, quota checking\n"
#~ "                       is done on a printer and on all the printer groups\n"
#~ "                       it belongs to.\n"
#~ "  \n"
#~ "  -g | --groups        Edit users groups print quotas instead of users.\n"
#~ "                          \n"
#~ "  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
#~ "                       print quotas\n"
#~ "                       \n"
#~ "  -n | --noquota       Doesn't set a quota but only does accounting.\n"
#~ "  \n"
#~ "  -r | --reset         Resets the actual page counter for the user\n"
#~ "                       or group to zero on the specified printers. \n"
#~ "                       The life time page counter is kept unchanged.\n"
#~ "                       \n"
#~ "  -R | --hardreset     Resets the actual and life time page counters\n"
#~ "                       for the user or group to zero on the specified \n"
#~ "                       printers. \n"
#~ "                       \n"
#~ "  -l | --limitby l     Choose if the user/group is limited in printing                     \n"
#~ "                       by its account balance or by its page quota.\n"
#~ "                       The default value is 'quota'. Allowed values\n"
#~ "                       are 'quota' 'balance' 'quota-then-balance' and\n"
#~ "                       'balance-then-quota'.\n"
#~ "                       WARNING : quota-then-balance and balance-then-quota\n"
#~ "                       are not yet implemented.\n"
#~ "                       \n"
#~ "  -b | --balance b     Sets the user's account balance to b.                     \n"
#~ "                       Account balance may be increase or decreased\n"
#~ "                       if b is prefixed with + or -.\n"
#~ "                       WARNING : when decreasing account balance,\n"
#~ "                       the total paid so far by the user is decreased\n"
#~ "                       too.\n"
#~ "                       Groups don't have a real balance, but the\n"
#~ "                       sum of their users' account balance.\n"
#~ "                       \n"
#~ "  -S | --softlimit sl  Sets the quota soft limit to sl pages.                       \n"
#~ "  \n"
#~ "  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
#~ "  \n"
#~ "  user1 through userN and group1 through groupN can use wildcards\n"
#~ "  if the --add option is not set.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
#~ "  \n"
#~ "  This will add users john, paul, george and ringo to the quota\n"
#~ "  database, and set their print quotas to the same values than user \n"
#~ "  jerome. User jerome must already exist.\n"
#~ "  User ringo's email address will also be set to 'ringo@example.com'\n"
#~ "  \n"
#~ "  $ edpykota --printer lp -S 50 -H 60 jerome\n"
#~ "  \n"
#~ "  This will set jerome's print quota on the lp printer to a soft limit\n"
#~ "  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
#~ "  printer lp doesn't exist on the Quota Storage Server then nothing is done.\n"
#~ "\n"
#~ "  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
#~ "  \n"
#~ "  Same as above, but if either user jerome or printer lp doesn't exist \n"
#~ "  on the Quota Storage Server they are automatically added. Also\n"
#~ "  user jerome is put into the groups \"coders\" and \"it\" which must\n"
#~ "  already exist in the Quota Storage.\n"
#~ "            \n"
#~ "  $ edpykota -g -S 500 -H 550 financial support            \n"
#~ "  \n"
#~ "  This will set print quota soft limit to 500 pages and hard limit\n"
#~ "  to 550 pages for groups financial and support on all printers.\n"
#~ "  \n"
#~ "  $ edpykota --reset jerome \"jo*\"\n"
#~ "  \n"
#~ "  This will reset jerome's page counter to zero on all printers, as\n"
#~ "  well as every user whose name begins with 'jo'.\n"
#~ "  Their life time page counter on each printer will be kept unchanged.\n"
#~ "  You can also reset the life time page counters by using the\n"
#~ "  --hardreset | -R command line option.\n"
#~ "  \n"
#~ "  $ edpykota --printer hpcolor --noquota jerome\n"
#~ "  \n"
#~ "  This will tell PyKota to not limit jerome when printing on the \n"
#~ "  hpcolor printer. All his jobs will be allowed on this printer, but \n"
#~ "  accounting of the pages he prints will still be kept.\n"
#~ "  Print Quotas for jerome on other printers are unchanged.\n"
#~ "  \n"
#~ "  $ edpykota --limitby balance jerome\n"
#~ "  \n"
#~ "  This will tell PyKota to limit jerome by his account's balance\n"
#~ "  when printing.\n"
#~ "  \n"
#~ "  $ edpykota --balance +10.0 jerome\n"
#~ "  \n"
#~ "  This will increase jerome's account balance by 10.0 (in your\n"
#~ "  own currency). You can decrease the account balance with a\n"
#~ "  dash prefix, and set it to a fixed amount with no prefix.\n"
#~ "  \n"
#~ "  $ edpykota --delete jerome rachel\n"
#~ "  \n"
#~ "  This will completely delete jerome and rachel from the Quota Storage\n"
#~ "  database. All their quotas and jobs will be deleted too.\n"
#~ "  \n"
#~ "  $ edpykota --printer lp --charge 0.1\n"
#~ "  \n"
#~ "  This will set the page price for printer lp to 0.1. Job price\n"
#~ "  will not be changed.\n"
#~ "  \n"
#~ "  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
#~ "  \n"
#~ "  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
#~ "  When printing either on hplj1 or hplj2, print quota will also be \n"
#~ "  checked and accounted for on virtual printers Laser and HP.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n"
#~ "Διορθωτής Ορίου Εκτυπώσεων για το PyKota.\n"
#~ "\n"
#~ "χρήση γραμμής εντολών :\n"
#~ "\n"
#~ "  edpykota [παράμετροι] χρήστης1 χρήστης2 ... χρήστηςN\n"
#~ "  \n"
#~ "  edpykota [παράμετροι] ομάδα1 ομάδα2 ... ομάδαN\n"
#~ "\n"
#~ "παράμετροι :\n"
#~ "\n"
#~ "  -v | --version       Εμφανίζει την έκδοση του edpykotaκαι τερματίζει.\n"
#~ "  -h | --help          Εμφανίζει αυτό το μήνυμα και τερματίζει.\n"
#~ "  \n"
#~ "  -a | --add           Προσθέτει χρήστες και/ή εκτυπωτές αν δεν υπάρχουν\n"
#~ "                       στη Βάση Δεδομένων Ορίων Εκτύπωσης.\n"
#~ "                       \n"
#~ "  -d | --delete        Αφαιρεί χρήστες/ομάδες από τη βάση δεδομένων των\n"
#~ "                       Ορίων εκτύπωσης. Οι εκτυπωτές δεν αφαιρούνται.\n"
#~ "                       \n"
#~ "  -c | --charge p[,j]  Ορίζει την τιμή χρέωσης ανά σελίδα και ανά εργασία\n"
#~ "                       για συγκεκριμένο εκτυπωτή. Η τιμή της εργασίας είναι\n"
#~ "                       προαιρετική. Αν οριστούν και οι δύο, χωρίστε τις με ένα\n"
#~ "                       κόμμα. Επιτρέπονται δεκαδικοί αριθμοί.\n"
#~ "  \n"
#~ "  -i | --ingroups g1[,g2...]  Προσθέτει τους χρήστες σε καθεμία από τις ομάδες\n"
#~ "                              που δίνονται χωρισμένες με κόμμα. Οι ομάδες\n"
#~ "                              πρέπει να υπάρχουν ήδη στη βάση δεδομένων.\n"
#~ "  \n"
#~ "  -u | --users         Μεταβάλλει τα όρια εκτυπώσεων χρηστών. Αυτή είναι η\n"
#~ "                       προεπιλεγμένη εργασία.\n"
#~ "  \n"
#~ "  -P | --printer p     Μεταβάλλει όρια εκτυπώσεων μόνο για τον εκτυπωτή p.\n"
#~ "                       Η παράμετρος p μπορεί να περιέχει μπαλαντέρ για να\n"
#~ "                       επιλεγούν μόνο κάποιοι εκτυπωτές. Η προεπιλεγμένη τιμή\n"
#~ "                       είναι *, δηλαδή όλοι οι εκτυπωτές. \n"
#~ "                       Μπορείτε να ορίσετε πολλά ονόματα ή μπαλαντέρ, \n"
#~ "                       διαχωρίζοντάς τα με κόμματα.\n"
#~ "  \n"
#~ "  -G | --pgroups pg1[,pg2...] Προσθέτει τον/τους εκτυπωτή/ές στις ομάδες\n"
#~ "                       εκτυπωτών pg1, pg2, κ.λ.π που πρέπει να προϋπάρχουν.\n"
#~ "                       Μια ομάδα εκτυπωτών συμπεριφέρεται ως εκτυπωτής, μόνο\n"
#~ "                       που συνήθως είναι άγνωστη στο σύστημα εκτυπώσεων.\n"
#~ "                       Δημιουργήστε ομάδες εκτυπωτών με τον ίδιο τρόπο που\n"
#~ "                       δημιουργείτε εκτυπωτές, μετά προσθέστε άλλους εκτυπωτές\n"
#~ "                       σε αυτές με αυτή την παράμετρο.\n"
#~ "                       Η σελιδομέτρηση και ο έλεγχος ορίων γίνονται για τον\n"
#~ "                       εκτυπωτή και για όλες τις ομάδες εκτυπωτών στις οποίες\n"
#~ "                       ανήκει.\n"
#~ "  \n"
#~ "  -g | --groups        Μεταβάλλει όρια εκτυπώσεων για ομάδες χρηστών αντί για\n"
#~ "                       απλούς χρήστες.\n"
#~ "                          \n"
#~ "  -p | --prototype u|g Χρησιμοποιεί τον χρήστη u ή την ομάδα g ως πρότυπο για\n"
#~ "                       τον ορισμό ορίων εκτυπώσεων\n"
#~ "                       \n"
#~ "  -n | --noquota       Δεν θέτει όριο εκτυπώσεων, μόνο κάνει σελιδομέτρηση.\n"
#~ "  \n"
#~ "  -r | --reset         Μηδενίζει το μετρητή σελίδων για τον χρήστη ή την\n"
#~ "                       ομάδα για τους συγκεκριμένους εκτυπωτές. \n"
#~ "                       Ο μόνιμος σελιδομετρητής δε μεταβάλλεται.\n"
#~ "                       \n"
#~ "  -R | --hardreset     Μηδενίζει τον πραγματικό και τον μόνιμο σελιδομετρητή\n"
#~ "                       για τον χρήστη ή την ομάδα στους συγκεκριμένους \n"
#~ "                       εκτυπωτές. \n"
#~ "                       \n"
#~ "  -l | --limitby l     Επιλογή αν ο χρήστης/ομάδα περιορίζεται στις εκτυπώσεις                       από το υπόλοιπο του λογαριασμού του ή το όριο εκτυπώσεών του.\n"
#~ "                       Η προεπιλεγμένη τιμή είναι 'quota' (όριο εκτυπώσεων).\n"
#~ "                       Επιτρεπτές τιμές είναι 'quota' (όριο εκτυπώσεων),\n"
#~ "                       'balance' (υπόλοιπο λογαριασμού), 'quota-then-balance' (πρώτα\n"
#~ "                       όριο μετά υπόλοιπο) και 'balance-then-quota' (πρώτα υπόλοιπο\n"
#~ "                       μετά όριο).                       ΠΡΟΣΟΧΗ : Οι επιλογές quota-then-balance και balance-then-quota\n"
#~ "                       δεν έχουν υλοποιηθεί ακόμη.\n"
#~ "                       \n"
#~ "  -b | --balance b     Ορίζει το υπόλοιπο εκτυπώσεων ενός λογαριασμού χρήστη σε b.\n"
#~ "                       Το υπόλοιπο εκτυπώσεων μπορεί να αυξηθεί ή να μειωθεί αν δοθεί\n"
#~ "                       πριν από το b ένα πρόσημο + ή -.\n"
#~ "                       ΠΡΟΣΟΧΗ : όταν μειώνετε το υπόλοιπο εκτυπώσεων, μειώνεται και,\n"
#~ "                       το ποσό που έχει εξοφληθεί από το χρήστη μέχρι εκείνη τη\n"
#~ "                       στιγμή.\n"
#~ "                       Οι ομάδες δεν έχουν πραγματικό υπόλοιπο, αλλά το άθροισμα των\n"
#~ "                       υπολοίπων των χρηστών τους.\n"
#~ "                       \n"
#~ "  -S | --softlimit sl  Θέτει το όριο προειδοποίησης σε sl σελίδες\n"
#~ "  \n"
#~ "  -H | --hardlimit hl  Θέτει το ανώτατο όριο εκτυπώσεων σε hl σελίδες.\n"
#~ "  \n"
#~ "  οι παράμετροι χρήστης1 εως χρήστηςN και ομάδα1 εως ομάδαN μπορούν να χρησιμοποιούν\n"
#~ "  μπαλαντέρ αν δεν οριστεί η παράμετρος --add.\n"
#~ "  \n"
#~ "παραδείγματα :                              \n"
#~ "\n"
#~ "  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
#~ "  \n"
#~ "  Προσθέτει τους χρήστες john, paul, george και ringo στη βάση\n"
#~ "  δεδομένων, και θέτει τα όρια εκτύπωσής τους στις ίδιες τιμές \n"
#~ "  με του χρήστη jerome. Ο χρήστης jerome πρέπει να προϋπάρχει.\n"
#~ "  Επίσης ορίζεται η email διεύθυνση του χρήστη ringo σε\n"
#~ "  'ringo@example.com'\n"
#~ "  \n"
#~ "  $ edpykota --printer lp -S 50 -H 60 jerome\n"
#~ "  \n"
#~ "  Θέτει τα όρια του χρήστη jerome στον εκτυπωτή lp με όριο προειδοποίησης\n"
#~ "  50 σελίδων, και ανώτατο όριο 60 σελίδων. Αν είτε ο χρήστης jerome είτε\n"
#~ "  ο εκτυπωτής lp δεν υπάρχει στη βάση δεδομένων, καμία μεταβολή δεν    εκτελείται.\n"
#~ "\n"
#~ "  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
#~ "  \n"
#~ "  Όπως και παραπάνω, αλλά αν δεν υπάρχουν είτε ο χρήστης jerome είτε ο \n"
#~ "  εκτυπωτής lp στη βάση δεδομένων, προστίθενται αυτόματα. Επίσης ο χρήστης\n"
#~ "  jerome εισάγεται στις ομάδες \"coders\" και \"it\" που πρέπει να\n"
#~ "  προϋπάρχουν στη βάση δεδομένων.\n"
#~ "            \n"
#~ "  $ edpykota -g -S 500 -H 550 financial support            \n"
#~ "  \n"
#~ "  Θέτει το όριο προειδοποίησης σε 500 σελίδες και το ανώτατο όριο σε 550\n"
#~ "  σελίδες για τις ομάδες financial και support σε όλους τους εκτυπωτές.\n"
#~ "  \n"
#~ "  $ edpykota --reset jerome \"jo*\"\n"
#~ "  \n"
#~ "  Μηδενίζει τους μετρητές σελίδων του χρήστη jerome και των χρηστών των οποίων\n"
#~ "  το όνομα αρχίζει με 'jo' σε όλους τους εκτυπωτές.\n"
#~ "  Ο μόνιμος μετρητής τους σε κάθε εκτυπωτή παραμένει αμετάβλητος.\n"
#~ "  Μπορείτε επίσης να μηδενίσετε τους μόνιμους μετρητές χρησιμοποιώντας την\n"
#~ "  παράμετρο --hardreset | -R .\n"
#~ "  \n"
#~ "  $ edpykota --printer hpcolor --noquota jerome\n"
#~ "  \n"
#~ "  Αφαιρεί το όριο εκτυπώσεων του χρήστη jerome για τον εκτυπωτή hpcolor. \n"
#~ "  Όλες οι εργασίες του θα επιτρέπονται στον εκτυπωτή, αλλά η σελιδομέτρηση \n"
#~ "  των εκτυπώσεών του θα γίνεται κανονικά.\n"
#~ "  Τα όρια εκτυπώσεων του jerome σε άλλους εκτυπωτές παραμένουν αμετάβλητα.\n"
#~ "  \n"
#~ "  $ edpykota --limitby balance jerome\n"
#~ "  \n"
#~ "  Περιορίζει το χρήστη jerome με βάση το υπόλοιπο εκτυπώσεών του.\n"
#~ "  \n"
#~ "  $ edpykota --balance +10.0 jerome\n"
#~ "  \n"
#~ "  Αυξάνει το υπόλοιπο του λογαριασμού jerome κατά 10.0 μονάδες (στο τρέχον\n"
#~ "  νόμισμα). Μπορείτε να μειώσετε το υπόλοιπο με το πρόσημο (-) ή να το\n"
#~ "  θέσετε σε κάποιο σταθερό ποσό χωρίς πρόσημο.\n"
#~ "  \n"
#~ "  $ edpykota --delete jerome rachel\n"
#~ "  \n"
#~ "  Αφαιρεί εντελώς τους χρήστες jerome και rachel από τη βάση δεδομένων.\n"
#~ "  Όλα τα όρια εκτυπώσεων και η ιστορία εργασιών θα διαγραφεί επίσης.\n"
#~ "  \n"
#~ "  $ edpykota --printer lp --charge 0.1\n"
#~ "  \n"
#~ "  Θέτε την τιμή της σελίδας για τον εκτυπωτή σε 0.1. Η τιμή της εργασίας\n"
#~ "  δε θα μεταβληθεί.\n"
#~ "  \n"
#~ "  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
#~ "  \n"
#~ "  Αναθέτει τους εκτυπωτές hplj1 και hplj2 στις ομάδες εκτυπωτών Laser και HP.\n"
#~ "  Όταν γίνεται εκτύπωση είτε στον hplj1 είτε hplj2, τα όρια εκτυπώσεων θα\n"
#~ "  ελεγχθούν και θα ενημερωθούν για τους εικονικούς εκτυπωτές Laser και HP.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n"
#~ "\n"
#~ "Για τυχόν προβλήματα στείλτε e-mail στο: %s"

#~ msgid "Group           used    soft    hard    balance grace         total       paid"
#~ msgstr "Ομάδα           τρέχον  προειδ. ανώτατο υπόλοιπο χάρη         σύνολο      πληρωμένα"

#~ msgid "User            used    soft    hard    balance grace         total       paid"
#~ msgstr "Χρήστης         τρέχον  προειδ. ανώτατο υπόλοιπο χάρη         σύνολο      πληρωμένα"

#~ msgid "Waiting for printer %s to be idle or printing..."
#~ msgstr "Αναμονή για κατάσταση ανενεργή ή εκτύπωσης στον εκτυπωτή %s..."