root / pykota / trunk / po / el_GR / pykota.po @ 3201

Revision 3201, 151.6 kB (checked in by jerome, 17 years ago)

v1.26beta is out

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1# PyKota
2#
3# PyKota : Print Quotas for CUPS and LPRng
4#
5# (c) 2003, 2004, 2005, 2006, 2007 Jerome Alet <alet@librelogiciel.com>
6# This program is free software; you can redistribute it and/or modify
7# it under the terms of the GNU General Public License as published by
8# the Free Software Foundation; either version 2 of the License, or
9# (at your option) any later version.
10#
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14# GNU General Public License for more details.
15#
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
19#
20# $Id$
21#
22# PyKota translation master file.
23# Copyright (c) 2003, 2004, 2005 Conseil Internet & Logiciels Libres
24# Jerome Alet <alet@librelogiciel.com>, 2003, 2004, 2005.
25#
26msgid ""
27msgstr ""
28"Project-Id-Version: PyKota v1.20\n"
29"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
30"POT-Creation-Date: 2006-03-30 22:00+0200\n"
31"PO-Revision-Date: 2004-10-26 18:51:00+0200\n"
32"Last-Translator: Spyros Melissovas <peppe@cs.uoi.gr>\n"
33"Language-Team: Greek <peppe@cs.uoi.gr>\n"
34"MIME-Version: 1.0\n"
35"Content-Type: text/plain; charset=ISO-8859-7\n"
36"Content-Transfer-Encoding: 8bit\n"
37
38#
39# NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY
40#
41msgid "ALLOW"
42msgstr ""
43
44msgid "DENY"
45msgstr ""
46
47msgid "CANCEL"
48msgstr ""
49
50msgid "PROBLEM"
51msgstr ""
52
53msgid "REFUND"
54msgstr ""
55
56#, python-format
57msgid ""
58"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
59"\n"
60"A tool to automate user account creation and initial balance setting.\n"
61"\n"
62"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
63"\n"
64"command line usage :\n"
65"\n"
66"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
67"  OF AN external policy IN pykota.conf\n"
68"  \n"
69"  autopykota { -i | --initbalance value } \n"
70"\n"
71"options :\n"
72"\n"
73"  -v | --version       Prints autopykota's version number then exits.\n"
74"  -h | --help          Prints this message then exits.\n"
75"  \n"
76"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
77"                       If the user already exists, actual balance is left\n"
78"                       unmodified. If unset, the default value is 0.\n"
79"\n"
80"  -e | --email addr    Sets the user's e-mail address.\n"
81"  \n"
82msgstr ""
83
84#, python-format
85msgid "SIGTERM received, job %s cancelled."
86msgstr "SIGTERM �� �� ���%s."
87
88#, python-format
89msgid "Network error while querying the CUPS server : %s"
90msgstr ""
91
92msgid "You are not allowed to print at this time."
93msgstr ""
94
95msgid "Print job cancelled."
96msgstr ""
97
98msgid "Unlimited"
99msgstr ""
100
101msgid "ON"
102msgstr ""
103
104msgid "OFF"
105msgstr ""
106
107#, python-format
108msgid "Banner generator %s exit code is %s"
109msgstr ""
110
111msgid "Banner won't be printed : maximum number of deny banners reached."
112msgstr ""
113
114#, python-format
115msgid "Beware : computed job size (%s) != precomputed job size (%s)"
116msgstr ""
117
118msgid ""
119"The job size will be trusted anyway according to the 'trustjobsize' directive"
120msgstr ""
121
122#, python-format
123msgid ""
124"The job size will be trusted because it is inferior to the 'trustjobsize' "
125"directive's limit %s"
126msgstr ""
127
128#, python-format
129msgid ""
130"The job size will be modified according to the 'trustjobsize' directive : %s"
131msgstr ""
132
133#, python-format
134msgid ""
135"Printer %s not registered in the PyKota system, applying external policy (%"
136"s) for printer %s"
137msgstr ""
138"���� %s � ������ ��� PyKota, ���"
139"��� ���s) � ����%s"
140
141#, python-format
142msgid ""
143"User %s not registered in the PyKota system, applying external policy (%s) "
144"for printer %s"
145msgstr ""
146"���%s � ������ ��� PyKota, ������ "
147"���s) � ����%s"
148
149#, python-format
150msgid ""
151"User %s doesn't have quota on printer %s in the PyKota system, applying "
152"external policy (%s) for printer %s"
153msgstr ""
154"���%s � �������%s ��� PyKota, ���"
155"��� ���s) � ����%s"
156
157#, python-format
158msgid ""
159"External policy %s for printer %s produced an error. Job rejected. Please "
160"check PyKota's configuration files."
161msgstr ""
162"������ %s � ����%s ������� "
163"��� ����������� �PyKota."
164
165#, python-format
166msgid ""
167"Printer %s not registered in the PyKota system, applying default policy (%s)"
168msgstr ""
169"���� %s � ������ ��� PyKota, ����� "
170"���s)"
171
172#, python-format
173msgid ""
174"User %s not registered in the PyKota system, applying default policy (%s) "
175"for printer %s"
176msgstr ""
177"���%s � ������ ��� PyKota, ����� "
178"���s) � ����%s"
179
180#, python-format
181msgid ""
182"User %s doesn't have quota on printer %s in the PyKota system, applying "
183"default policy (%s)"
184msgstr ""
185"���%s � �������%s ��� PyKota, ���"
186"�� ���s)"
187
188#, python-format
189msgid ""
190"Printer %s still not registered in the PyKota system, job will be rejected"
191msgstr ""
192"���� %s � �������� ��� PyKota, ��� "
193"����"
194
195#, python-format
196msgid ""
197"User %s still not registered in the PyKota system, job will be rejected on "
198"printer %s"
199msgstr ""
200"���%s � �������� ��� PyKota, ��� �"
201"��� � ���%s"
202
203#, python-format
204msgid ""
205"User %s still doesn't have quota on printer %s in the PyKota system, job "
206"will be rejected"
207msgstr ""
208"���%s � ���������%s ��� PyKota, �
209"�������
210
211msgid "Job is a dupe"
212msgstr ""
213
214msgid "Printing is denied by configuration"
215msgstr ""
216
217#, python-format
218msgid "Duplicate print jobs are not allowed on printer %s."
219msgstr ""
220
221msgid "Subprocess denied printing of a dupe"
222msgstr ""
223
224#, python-format
225msgid "Duplicate print jobs are not allowed on printer %s at this time."
226msgstr ""
227
228msgid "Subprocess allowed printing of a dupe"
229msgstr ""
230
231#, python-format
232msgid ""
233"\n"
234"\n"
235"Your system administrator :\n"
236"\n"
237"\t%s - <%s>\n"
238msgstr ""
239
240#, python-format
241msgid "Impossible to connect to SMTP server : %s"
242msgstr "���� ����� SMTP : %s"
243
244msgid "Print Quota"
245msgstr "�����"
246
247#, python-format
248msgid "Impossible to send mail to %s, error %s : %s"
249msgstr "����� e-mail � %s, ��%s : %s"
250
251#, python-format
252msgid "Problem when sending mail : %s"
253msgstr ""
254
255msgid "Job contains no data. Printing is denied."
256msgstr "����������� �������
257
258msgid "Error in external policy script. Printing is denied."
259msgstr ""
260
261#, python-format
262msgid ""
263"Still no print quota entry for user %s on printer %s after external policy. "
264"Printing is denied."
265msgstr ""
266
267msgid "Printing is denied by printer policy."
268msgstr ""
269
270msgid "Job allowed by printer policy. No accounting will be done."
271msgstr ""
272
273#, python-format
274msgid "Invalid policy %s for printer %s"
275msgstr "� ����� %s � ����%s"
276
277#, python-format
278msgid "Precomputed job size (%s pages) too large for printer %s."
279msgstr ""
280
281#, python-format
282msgid "You are not allowed to print so many pages on printer %s at this time."
283msgstr ""
284
285#, python-format
286msgid "User %s is not allowed to print at this time."
287msgstr ""
288
289msgid "Your account settings forbid you to print at this time."
290msgstr ""
291
292#, python-format
293msgid "Print Quota exceeded for user %s on printer %s"
294msgstr "����� ��� � ���s � ���%s"
295
296#, python-format
297msgid "Print Quota low for user %s on printer %s"
298msgstr "������������s � ���%s"
299
300msgid "Job denied, no accounting will be done."
301msgstr ""
302
303msgid "Job cancelled, no accounting will be done."
304msgstr ""
305
306msgid "Job accounting begins."
307msgstr "�����������
308msgid "Job denied, no accounting has been done."
309msgstr ""
310
311msgid "Job cancelled, no accounting has been done."
312msgstr ""
313
314msgid "Job accounting ends."
315msgstr "����������
316msgid ""
317"Job size forced to 0 because the real CUPS backend failed. No accounting "
318"will be done."
319msgstr ""
320
321msgid "The real CUPS backend failed, but the job will be accounted for anyway."
322msgstr ""
323
324msgid "Job size forced to 0 because printing is denied."
325msgstr "� ���������� �� ������"
326
327msgid "Job size forced to 0 because printing was cancelled."
328msgstr ""
329
330#, python-format
331msgid "Job size : %i"
332msgstr "������: %i"
333
334#, python-format
335msgid "User %s's quota on printer %s won't be modified"
336msgstr ""
337
338#, python-format
339msgid "Updating user %s's quota on printer %s"
340msgstr "��� �����s � ���%s"
341
342msgid "Job added to history."
343msgstr "������� ����"
344
345#, python-format
346msgid "Billing code %s was updated."
347msgstr ""
348
349#, python-format
350msgid "Incorrect value for the 'onbackenderror' directive in section [%s]"
351msgstr ""
352
353#, python-format
354msgid "The real backend produced an error, we will try again in %s seconds."
355msgstr ""
356
357#, python-format
358msgid "Job %s interrupted by the administrator !"
359msgstr ""
360
361#, python-format
362msgid ""
363"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
364"\n"
365"Dumps PyKota database's content.\n"
366"\n"
367"command line usage :\n"
368"\n"
369"  dumpykota [options] [filterexpr]\n"
370"\n"
371"options :\n"
372"\n"
373"  -v | --version       Prints dumpykota's version number then exits.\n"
374"  -h | --help          Prints this message then exits.\n"
375"  \n"
376"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
377"                       \n"
378"                         - history : dumps the jobs history.\n"
379"                         - users : dumps users.\n"
380"                         - groups : dumps user groups.\n"
381"                         - printers : dump printers.\n"
382"                         - upquotas : dump user quotas.\n"
383"                         - gpquotas : dump user groups quotas.\n"
384"                         - payments : dumps user payments.\n"
385"                         - pmembers : dumps printer groups members.\n"
386"                         - umembers : dumps user groups members.\n"
387"                         - billingcodes : dumps billing codes.\n"
388"                         - all : dumps all PyKota datas. The output format\n"
389"                                 is always XML in this case.\n"
390"                         \n"
391"                       NB : the -d | --data command line option   \n"
392"                       is MANDATORY.\n"
393"  \n"
394"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
395"                       the format is to dump datas in the csv format (comma\n"
396"                       separated values). All data dumped is between double\n"
397"                       quotes. Allowed formats are :\n"
398"                       \n"
399"                         - csv : separate datas with commas\n"
400"                         - ssv : separate datas with semicolons\n"
401"                         - tsv : separate datas with tabs\n"
402"                         - xml : dump data as XML \n"
403"                         - cups : dump datas in CUPS' page_log format :\n"
404"                                  ONLY AVAILABLE WITH --data history\n"
405"                         \n"
406"  -o | --output fname  All datas will be dumped to the file instead of\n"
407"                       to the standard output. The special '-' filename\n"
408"                       is the default value and means stdout.\n"
409"                       WARNING : existing files are truncated !\n"
410"\n"
411"  -O | --orderby exp   Change the ordering or result. 'exp' is a comma\n"
412"                       separated list of ordering statements, for example\n"
413"                       '--orderby +username,-printername'. Not all "
414"expression\n"
415"                       values are meaningful, so using this command line \n"
416"                       switch is not recommanded if you don't know the \n"
417"                       exact layout of PyKota's database schema.\n"
418"                       \n"
419"  -s | --sum           Summarize the selected datas.\n"
420"                           ONLY AVAILABLE WITH --data history or payments\n"
421"\n"
422"  Use the filter expressions to extract only parts of the \n"
423"  datas. Allowed filters are of the form :\n"
424"                \n"
425"         key=value\n"
426"                         \n"
427"  Allowed keys for now are :  \n"
428"                       \n"
429"         username       User's name\n"
430"         groupname      Users group's name\n"
431"         printername    Printer's name\n"
432"         pgroupname     Printers group's name\n"
433"         hostname       Client's hostname\n"
434"         jobid          Job's Id\n"
435"         billingcode    Job's billing code\n"
436"         start          Job's date of printing\n"
437"         end            Job's date of printing\n"
438"         \n"
439"  Dates formatting with 'start' and 'end' filter keys :\n"
440"  \n"
441"    YYYY : year boundaries\n"
442"    YYYYMM : month boundaries\n"
443"    YYYYMMDD : day boundaries\n"
444"    YYYYMMDDhh : hour boundaries\n"
445"    YYYYMMDDhhmm : minute boundaries\n"
446"    YYYYMMDDhhmmss : second boundaries\n"
447"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
448"15)\n"
449"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
450"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
451"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
452"\n"
453"  'now' and 'today' are not exactly the same since today represents the "
454"first\n"
455"  or last second of the day depending on if it's used in a start= or end=\n"
456"  date expression. The utility to be able to specify dates in the future is\n"
457"  a question which remains to be answered :-)\n"
458"  \n"
459"  Contrary to other PyKota management tools, wildcard characters are not \n"
460"  expanded, so you can't use them.\n"
461"  \n"
462"  NB : not all keys are allowed for each data type, so the result may be \n"
463"  empty if you use a key not available for a particular data type.\n"
464"  \n"
465"Examples :\n"
466"\n"
467"  $ dumpykota --data history --format csv >myfile.csv\n"
468"  \n"
469"  This dumps the history in a comma separated values file, for possible\n"
470"  use in a spreadsheet.\n"
471"  \n"
472"  $ dumpykota --data users --format xml -o users.xml\n"
473"  \n"
474"  Dumps all users datas to the users.xml file.\n"
475"  \n"
476"  $ dumpykota --data history printername=HP2100 username=jerome\n"
477"  \n"
478"  Dumps the job history for user jerome on printer HP2100 only.\n"
479"  \n"
480"  $ dumpykota --data history start=200503 end=20050730234615\n"
481"  \n"
482"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
483"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
484msgstr ""
485
486msgid "The -d | --data command line option is mandatory, see help."
487msgstr "����-d | --data �����, �����."
488
489#, python-format
490msgid ""
491"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
492"\n"
493"A Print Quota editor for PyKota.\n"
494"\n"
495"command line usage :\n"
496"\n"
497"  edpykota [options] user1 user2 ... userN\n"
498"  \n"
499"  edpykota [options] group1 group2 ... groupN\n"
500"\n"
501"options :\n"
502"\n"
503"  -v | --version       Prints edpykota's version number then exits.\n"
504"  -h | --help          Prints this message then exits.\n"
505"  \n"
506"  -a | --add           Adds users or groups print quota entries if\n"
507"                       they don't exist in database.\n"
508"                       \n"
509"  -d | --delete        Deletes users or groups print quota entries.\n"
510"                       Users or groups are never deleted, you have\n"
511"                       to use the pkusers command to delete them.\n"
512"                       The history will be purge from all matching\n"
513"                       jobs, unless -g | --groups is used.\n"
514"  \n"
515"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
516"                       use wildcards characters to select only\n"
517"                       some printers. The default value is *, meaning\n"
518"                       all printers. \n"
519"                       You can specify several names or wildcards, \n"
520"                       by separating them with commas.\n"
521"  \n"
522"  -g | --groups        Edit groups print quota entries instead of \n"
523"                       users print quota entries.\n"
524"                          \n"
525"  -L | --list          Lists users or groups print quota entries.\n"
526"  \n"
527"  -n | --noquota       Sets both soft and hard limits to None for users\n"
528"                       or groups print quota entries.\n"
529"  \n"
530"  -r | --reset         Resets the actual page counter for the user\n"
531"                       or group to zero on the specified printers. \n"
532"                       The life time page counter is kept unchanged.\n"
533"                       \n"
534"  -R | --hardreset     Resets the actual and life time page counters\n"
535"                       for the user or group to zero on the specified \n"
536"                       printers. This is a shortcut for '--used 0'.\n"
537"                       \n"
538"  -s | --skipexisting  In combination with the --add option above, tells\n"
539"                       edpykota to not modify existing print quota entries.\n"
540"                       \n"
541"  -S | --softlimit sl  Sets the quota soft limit to sl "
542"pages.                       \n"
543"  \n"
544"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
545"  \n"
546"  -I | --increase v    Increase existing Soft and Hard limits by the value\n"
547"                       of v. You can prefix v with + or -, if no sign is\n"
548"                       used, + is assumed.\n"
549"\n"
550"  -U | --used u        Sets the page counters for the user u pages on\n"
551"                       the selected printers. Doesn't work for groups, "
552"since\n"
553"                       their page counters are the sum of all their "
554"members'\n"
555"                       page counters.\n"
556"                       Useful for migrating users from a different system\n"
557"                       where they have already used some pages. Actual\n"
558"                       and Life Time page counters may be increased or "
559"decreased\n"
560"                       if u is prefixed with + or -.\n"
561"                       WARNING : BOTH page counters are modified in all "
562"cases,\n"
563"                       so be careful.\n"
564"                       NB : if u equals '0', then the action taken is\n"
565"                       the same as if --hardreset was used.\n"
566"\n"
567"  user1 through userN and group1 through groupN can use wildcards\n"
568"  if the --add option is not set.\n"
569"  \n"
570"examples :                              \n"
571"\n"
572"  $ edpykota --add john paul george ringo\n"
573"  \n"
574"  This will create print quota entries for users john, paul, george\n"
575"  and ringo on all printers. These print quota entries will have no\n"
576"  limit set.\n"
577"  \n"
578"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
579"  \n"
580"  This will set jerome's print quota on the lp printer to a soft limit\n"
581"  of 50 pages, and a hard limit of 60 pages. Both user jerome and\n"
582"  printer lp have been previously created with the pkusers and pkprinters\n"
583"  commands, respectively.\n"
584"\n"
585"  $ edpykota -g -S 500 -H 550 financial support            \n"
586"  \n"
587"  This will set print quota soft limit to 500 pages and hard limit\n"
588"  to 550 pages for groups financial and support on all printers.\n"
589"  \n"
590"  $ edpykota --reset jerome \"jo*\"\n"
591"  \n"
592"  This will reset jerome's page counter to zero on all printers, as\n"
593"  well as every user whose name begins with 'jo'.\n"
594"  Their life time page counter on each printer will be kept unchanged.\n"
595"  You can also reset the life time page counters by using the\n"
596"  --hardreset | -R command line option.\n"
597"  \n"
598"  $ edpykota --printer hpcolor --noquota jerome\n"
599"  \n"
600"  This will tell PyKota to not limit jerome when printing on the \n"
601"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
602"  accounting of the pages he prints will still be kept.\n"
603"  Print Quotas for jerome on other printers are unchanged.\n"
604"  \n"
605"  $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n"
606"  \n"
607"  This will delete users jerome and rachel's print quota\n"
608"  entries on all printers which name begin with 'HP' or\n"
609"  'XER'. The jobs printed by these users on these printers\n"
610"  will be deleted from the history.\n"
611msgstr ""
612
613#, python-format
614msgid "You can't set negative limits for %s"
615msgstr ""
616
617msgid "Extracting datas"
618msgstr ""
619
620#, python-format
621msgid "Page counter : %s"
622msgstr ""
623
624#, python-format
625msgid "Lifetime page counter : %s"
626msgstr ""
627
628#, python-format
629msgid "Soft limit : %s"
630msgstr ""
631
632#, python-format
633msgid "Hard limit : %s"
634msgstr ""
635
636#, python-format
637msgid "Date limit : %s"
638msgstr ""
639
640#, python-format
641msgid "Maximum job size : %s"
642msgstr ""
643
644#, python-format
645msgid "%s pages"
646msgstr ""
647
648#, python-format
649msgid "Warning banners printed : %s"
650msgstr ""
651
652msgid "Deletion"
653msgstr ""
654
655#, python-format
656msgid "Invalid used value %s."
657msgstr ""
658
659#, python-format
660msgid "Invalid increase value %s."
661msgstr ""
662
663#, python-format
664msgid "Invalid softlimit value %s."
665msgstr "� ��������%s."
666
667#, python-format
668msgid "Invalid hardlimit value %s."
669msgstr "� ����� �s."
670
671#, python-format
672msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
673msgstr ""
674"� �� �%i ������������%i, ��� "
675"��
676
677#, python-format
678msgid "Undefined hard limit set to soft limit (%s)."
679msgstr ""
680
681#, python-format
682msgid "Undefined soft limit set to hard limit (%s)."
683msgstr ""
684
685msgid "Creation"
686msgstr ""
687
688#, python-format
689msgid "No entry matches %s. Please use pkusers to create them first."
690msgstr ""
691
692msgid "Modification"
693msgstr ""
694
695msgid "incompatible options, see help."
696msgstr "������ ������."
697
698msgid "You have to pass user or group names on the command line"
699msgstr "������� ������ �� � �� ���
700#, python-format
701msgid ""
702"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
703"\n"
704"Generates print quota reports.\n"
705"\n"
706"command line usage :\n"
707"\n"
708"  repykota [options] \n"
709"\n"
710"options :\n"
711"\n"
712"  -v | --version       Prints repykota's version number then exits.\n"
713"  -h | --help          Prints this message then exits.\n"
714"  \n"
715"  -u | --users         Generates a report on users quota, this is \n"
716"                       the default.\n"
717"  \n"
718"  -g | --groups        Generates a report on group quota instead of users.\n"
719"  \n"
720"  -i | --ingroups g1[,g2...]  Only lists users who are members of these\n"
721"                              groups. Reserved to PyKota Administrators.\n"
722"  \n"
723"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
724"                       use wildcards characters to select only\n"
725"                       some printers. The default value is *, meaning\n"
726"                       all printers.\n"
727"                       You can specify several names or wildcards, \n"
728"                       by separating them with commas.\n"
729"  \n"
730"examples :                              \n"
731"\n"
732"  $ repykota --printer lp\n"
733"  \n"
734"  This will print the quota status for all users who use the lp printer.\n"
735"\n"
736"  $ repykota \n"
737"  \n"
738"  This will print the quota status for all users on all printers.\n"
739"  \n"
740"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
741"  \n"
742"  This will print the quota status for user jerome and all users\n"
743"  whose name begins with \"jo\" on all printers which name begins\n"
744"  with \"laser\" or ends with \"pson\".\n"
745"  \n"
746"  If launched by an user who is not a PyKota administrator, additionnal\n"
747"  arguments representing users or groups names are ignored, and only the\n"
748"  current user/group is reported.\n"
749msgstr ""
750
751msgid "Option --ingroups is reserved to PyKota Administrators."
752msgstr ""
753
754#, python-format
755msgid "There's no printer matching %s"
756msgstr "������� ������%s"
757
758#, python-format
759msgid ""
760"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
761"\n"
762"Sends mail to users over print quota.\n"
763"\n"
764"command line usage :\n"
765"\n"
766"  warnpykota  [options]  [names]\n"
767"\n"
768"options :\n"
769"\n"
770"  -v | --version       Prints warnpykota's version number then exits.\n"
771"  -h | --help          Prints this message then exits.\n"
772"  \n"
773"  -u | --users         Warns users over their print quota, this is the \n"
774"                       default.\n"
775"  \n"
776"  -g | --groups        Warns users whose groups quota are over limit.\n"
777"  \n"
778"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
779"                       use wildcards characters to select only\n"
780"                       some printers. The default value is *, meaning\n"
781"                       all printers.\n"
782"                       You can specify several names or wildcards, \n"
783"                       by separating them with commas.\n"
784"  \n"
785"examples :                              \n"
786"\n"
787"  $ warnpykota --printer lp\n"
788"  \n"
789"  This will warn all users of the lp printer who have exceeded their\n"
790"  print quota.\n"
791"\n"
792"  $ warnpykota \n"
793"  \n"
794"  This will warn all users  who have exceeded their print quota on\n"
795"  any printer.\n"
796"\n"
797"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
798"  \n"
799"  This will warn all users of groups which names begins with \"dev\" and\n"
800"  who have exceeded their print quota on any printer which name begins \n"
801"  with \"laserjet\"\n"
802"  \n"
803"  If launched by an user who is not a PyKota administrator, additionnal\n"
804"  arguments representing users or groups names are ignored, and only the\n"
805"  current user/group is reported.\n"
806msgstr ""
807
808#, python-format
809msgid ""
810"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
811"\n"
812"Generates banners.\n"
813"\n"
814"command line usage :\n"
815"\n"
816"  pkbanner  [options]  [more info]\n"
817"\n"
818"options :\n"
819"\n"
820"  -v | --version       Prints pkbanner's version number then exits.\n"
821"  -h | --help          Prints this message then exits.\n"
822"  \n"
823"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
824"                       be drawn at the center top of the page. The default\n"
825"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
826"                       \n"
827"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
828"                       page sizes are recognized, like 'A4' or 'Letter'\n"
829"                       to name a few. The default size is A4.\n"
830"  \n"
831"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
832"                       used to save toner. The default value is 0, which\n"
833"                       means that no toner saving will be done.\n"
834"  \n"
835"  -u | --url u         Uses u as an url to be written at the bottom of \n"
836"                       the banner page. The default url is :\n"
837"                       http://www.pykota.com/\n"
838"  \n"
839"examples :                              \n"
840"\n"
841"  Using pkbanner directly from the command line is not recommended,\n"
842"  excepted for testing purposes. You should use pkbanner in the\n"
843"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
844"  \n"
845"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
846"  \n"
847"      With such a setting in pykota.conf, all print jobs will be \n"
848"      prefixed with an A4 banner with no logo, and text luminosity will\n"
849"      be increased by 75%%. The PostScript output will be directly sent\n"
850"      to your printer.\n"
851"      \n"
852"  You'll find more examples in the sample configuration file included    \n"
853"  in PyKota.\n"
854msgstr ""
855
856msgid "Unknown"
857msgstr ""
858
859msgid "Username"
860msgstr ""
861
862msgid "More Info"
863msgstr ""
864
865msgid "Job"
866msgstr ""
867
868msgid "Date"
869msgstr "����"
870
871msgid "Allowed"
872msgstr ""
873
874msgid "Denied"
875msgstr ""
876
877msgid "Allowed with Warning"
878msgstr ""
879
880msgid "Problem"
881msgstr ""
882
883msgid "Cancelled"
884msgstr ""
885
886msgid "Result"
887msgstr ""
888
889msgid "Title"
890msgstr "��"
891
892msgid "Filename"
893msgstr "�����
894
895#, python-format
896msgid "Pages printed so far on %s"
897msgstr ""
898
899msgid "Account balance"
900msgstr ""
901
902msgid "Soft Limit"
903msgstr ""
904
905msgid "Hard Limit"
906msgstr ""
907
908msgid "Date Limit"
909msgstr ""
910
911msgid "No Limit"
912msgstr ""
913
914msgid "No Accounting"
915msgstr ""
916
917msgid "Forbidden"
918msgstr ""
919
920msgid "Printing Mode"
921msgstr ""
922
923msgid "Allowed range is (0..99)"
924msgstr ""
925
926#, python-format
927msgid "Invalid 'savetoner' option %s : %s"
928msgstr ""
929
930#, python-format
931msgid "Invalid 'pagesize' option %s, defaulting to A4."
932msgstr ""
933
934#, python-format
935msgid ""
936"pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n"
937"\n"
938"A billing codes Manager for PyKota.\n"
939"\n"
940"command line usage :\n"
941"\n"
942"  pkbcodes [options] code1 code2 code3 ... codeN\n"
943"\n"
944"options :\n"
945"\n"
946"  -v | --version       Prints pkbcodes version number then exits.\n"
947"  -h | --help          Prints this message then exits.\n"
948"  \n"
949"  -a | --add           Adds billing codes if they don't exist in PyKota's\n"
950"                       database. If they exist, they are modified\n"
951"                       unless -s|--skipexisting is also used.\n"
952"\n"
953"  -d | --delete        Deletes billing codes from PyKota's database.\n"
954"                       NB : the history entries with this billing code\n"
955"                       are not deleted, voluntarily.\n"
956"\n"
957"  -D | --description d Adds a textual description to billing codes.\n"
958"\n"
959"  -l | --list          List informations about the billing codes.\n"
960"\n"
961"  -r | --reset         Resets the billing codes' balance and page counters\n"
962"                       to 0.\n"
963"\n"
964"  -s | --skipexisting  In combination with the --add option above, tells\n"
965"                       pkbcodes to not modify existing billing codes.\n"
966"\n"
967"  code1 through codeN can contain wildcards if the --add option\n"
968"  is not set.\n"
969"\n"
970"examples :                              \n"
971"\n"
972"  $ pkbcodes --add -D \"My project\" myproj\n"
973"\n"
974"  Will create the myproj billing code with \"My project\"\n"
975"  as the description.\n"
976"\n"
977"  $ pkbcodes --delete \"*\"\n"
978"\n"
979"  This will completely delete all the billing codes, but without\n"
980"  removing any matching job from the history. USE WITH CARE ANYWAY !\n"
981"  \n"
982"  $ pkbcodes --list \"my*\"\n"
983"  \n"
984"  This will list all billing codes which name begins with 'my'.\n"
985msgstr ""
986
987msgid "You're not allowed to use this command."
988msgstr "��������� �����"
989
990#, python-format
991msgid "There's no billingcode matching %s"
992msgstr ""
993
994msgid "pages"
995msgstr ""
996
997msgid "and"
998msgstr ""
999
1000msgid "credits"
1001msgstr ""
1002
1003#, python-format
1004msgid "Billing code [%s] already exists, skipping."
1005msgstr ""
1006
1007#, python-format
1008msgid "Billing code [%s] already exists, will be modified."
1009msgstr ""
1010
1011msgid "You have to pass billing codes on the command line"
1012msgstr ""
1013
1014#, python-format
1015msgid ""
1016"pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1017"\n"
1018"An invoice generator for PyKota.\n"
1019"\n"
1020"command line usage :\n"
1021"\n"
1022"  pkinvoice [options] [filterexpr]\n"
1023"\n"
1024"options :\n"
1025"\n"
1026"  -v | --version       Prints pkinvoice's version number then exits.\n"
1027"  -h | --help          Prints this message then exits.\n"
1028"  \n"
1029"  -l | --logo img      Use the image as the invoice's logo. The logo will\n"
1030"                       be drawn at the center top of the page. The default\n"
1031"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
1032"                       \n"
1033"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
1034"                       page sizes are recognized, like 'A4' or 'Letter'\n"
1035"                       to name a few. The default size is A4.\n"
1036"                       \n"
1037"  -n | --number N      Sets the number of the first invoice. This number\n"
1038"                       will automatically be incremented for each invoice.\n"
1039"                       \n"
1040"  -o | --output f.pdf  Defines the name of the invoice file which will\n"
1041"                       be generated as a PDF document. If not set or\n"
1042"                       set to '-', the PDF document is sent to standard\n"
1043"                       output. \n"
1044"                       \n"
1045"  -u | --unit u        Defines the name of the unit to use on the "
1046"invoice.                       \n"
1047"                       The default unit is 'Credits', optionally translated\n"
1048"                       to your native language if it is supported by "
1049"PyKota.\n"
1050"  \n"
1051"  -V | --vat p         Sets the percent value of the applicable VAT to be\n"
1052"                       exposed. The default is 0.0, meaning no VAT\n"
1053"                       information will be included.\n"
1054"  \n"
1055"\n"
1056"  Use the filter expressions to extract only parts of the \n"
1057"  datas. Allowed filters are of the form :\n"
1058"                \n"
1059"         key=value\n"
1060"                         \n"
1061"  Allowed keys for now are :  \n"
1062"                       \n"
1063"         username       User's name\n"
1064"         printername    Printer's name\n"
1065"         hostname       Client's hostname\n"
1066"         jobid          Job's Id\n"
1067"         billingcode    Job's billing code\n"
1068"         start          Job's date of printing\n"
1069"         end            Job's date of printing\n"
1070"         \n"
1071"  Dates formatting with 'start' and 'end' filter keys :\n"
1072"  \n"
1073"    YYYY : year boundaries\n"
1074"    YYYYMM : month boundaries\n"
1075"    YYYYMMDD : day boundaries\n"
1076"    YYYYMMDDhh : hour boundaries\n"
1077"    YYYYMMDDhhmm : minute boundaries\n"
1078"    YYYYMMDDhhmmss : second boundaries\n"
1079"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
1080"15)\n"
1081"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
1082"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
1083"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
1084"\n"
1085"  'now' and 'today' are not exactly the same since today represents the "
1086"first\n"
1087"  or last second of the day depending on if it's used in a start= or end=\n"
1088"  date expression. The utility to be able to specify dates in the future is\n"
1089"  a question which remains to be answered :-)\n"
1090"  \n"
1091"  Contrary to other PyKota management tools, wildcard characters are not \n"
1092"  expanded, so you can't use them.\n"
1093"  \n"
1094"examples :\n"
1095"\n"
1096"  $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n"
1097"  \n"
1098"  Will generate a PDF document containing invoices for all users\n"
1099"  who have spent some credits last month. Invoices will be done in\n"
1100"  EURO.  No VAT information will be included.\n"
1101msgstr ""
1102
1103msgid "Invoice"
1104msgstr ""
1105
1106msgid "Edited on"
1107msgstr ""
1108
1109msgid "Number of jobs printed"
1110msgstr ""
1111
1112msgid "Number of pages printed"
1113msgstr ""
1114
1115msgid "Amount due"
1116msgstr ""
1117
1118msgid "Included VAT"
1119msgstr ""
1120
1121msgid "Here's the invoice for your printouts"
1122msgstr ""
1123
1124msgid "Generating invoices"
1125msgstr ""
1126
1127#, python-format
1128msgid "Incorrect value '%s' for the --vat command line option"
1129msgstr ""
1130
1131#, python-format
1132msgid "Incorrect value '%s' for the --number command line option"
1133msgstr ""
1134
1135#, python-format
1136msgid "Invalid filter value [%s], see help."
1137msgstr ""
1138
1139#, python-format
1140msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits"
1141msgstr ""
1142
1143msgid "Credits"
1144msgstr ""
1145
1146#, python-format
1147msgid ""
1148"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1149"\n"
1150"Email gateway for PyKota.\n"
1151"\n"
1152"command line usage :\n"
1153"\n"
1154"  pkmail  [options]\n"
1155"\n"
1156"options :\n"
1157"\n"
1158"  -v | --version       Prints pkmail's version number then exits.\n"
1159"  -h | --help          Prints this message then exits.\n"
1160"  \n"
1161"    \n"
1162"  This command is meant to be used from your mail server's aliases file,\n"
1163"  as a pipe. It will then accept commands send to it in email messages,\n"
1164"  and will send the answer to the command's originator.\n"
1165"  \n"
1166"  To use this command, create an email alias in /etc/aliases with\n"
1167"  the following format :\n"
1168"  \n"
1169"    pykotacmd: \"|/usr/bin/pkmail\"\n"
1170"    \n"
1171"  Then run the 'newaliases' command to regenerate the aliases database.\n"
1172"  \n"
1173"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
1174"  the command in the subject.\n"
1175"  \n"
1176"  List of supported commands :\n"
1177"  \n"
1178"        report [username]\n"
1179"  \n"
1180"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
1181"  system user in the 'pykota' system group to ensure this user can\n"
1182"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
1183"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
1184"  that you think at least twice before doing this though.\n"
1185"  \n"
1186"  Use at your own risk !\n"
1187msgstr ""
1188
1189msgid "Result of your commands"
1190msgstr ""
1191
1192#, python-format
1193msgid ""
1194"pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1195"\n"
1196"Notifies or ask questions to end users who launched the PyKotIcon "
1197"application.\n"
1198"\n"
1199"command line usage :\n"
1200"\n"
1201"  pknotify  [options]  [arguments]\n"
1202"\n"
1203"options :\n"
1204"\n"
1205"  -v | --version             Prints pknotify's version number then exits.\n"
1206"  -h | --help                Prints this message then exits.\n"
1207"  \n"
1208"  -d | --destination h[:p]   Sets the destination hostname and optional\n"
1209"                             port onto which contact the remote PyKotIcon\n"
1210"                             application. This option is mandatory.\n"
1211"                             When not specified, the port defaults to 7654.\n"
1212"                             \n"
1213"  -a | --ask                 Tells pknotify to ask something to the end\n"
1214"                             user. Then pknotify will output the result.\n"
1215"                       \n"
1216"  -C | --checkauth           When --ask is used and both an 'username' and "
1217"a\n"
1218"                             'password' are asked to the end user, then\n"
1219"                             pknotify will try to authenticate the user\n"
1220"                             through PAM. If authentified, this program\n"
1221"                             will print \"AUTH=YES\", else \"AUTH=NO\".\n"
1222"                             If a field is missing, \"AUTH=IMPOSSIBLE\" "
1223"will\n"
1224"                             be printed. If the user is authenticated, then\n"
1225"                             \"USERNAME=xxxx\" will be printed as well.\n"
1226"                             \n"
1227"  -c | --confirm             Tells pknotify to ask for either a "
1228"confirmation                       \n"
1229"                             or abortion.\n"
1230"                             \n"
1231"  -D | --denyafter N         With --checkauth above, makes pknotify "
1232"loop                           \n"
1233"                             up to N times if the password is incorrect.\n"
1234"                             After having reached the limit, \"DENY\" will\n"
1235"                             be printed, which effectively rejects the job.\n"
1236"                             The default value of N is 1, meaning the job\n"
1237"                             is denied after the first unsuccessful try.\n"
1238"                             \n"
1239"  -N | --noremote action     If it's impossible to connect to the remote\n"
1240"                             PyKotIcon machine, do this action instead.\n"
1241"                             Allowed actions are 'CONTINUE' and 'CANCEL', \n"
1242"                             which will respectively allow the processing\n"
1243"                             of the print job to continue, or the job to\n"
1244"                             be cancelled. The default value is CANCEL.\n"
1245"                             \n"
1246"  -n | --notify              Tells pknotify to send an informational "
1247"message\n"
1248"                             to the end user.\n"
1249"                             \n"
1250"  -q | --quit                Tells pknotify to send a message asking the\n"
1251"                             PyKotIcon application to exit. This option can\n"
1252"                             be combined with the other ones to make "
1253"PyKotIcon\n"
1254"                             exit after having sent the answer from the "
1255"dialog.\n"
1256"                             \n"
1257"  -t | --timeout T           Tells pknotify to ignore the end user's answer "
1258"if\n"
1259"                             it comes past T seconds after the dialog box "
1260"being\n"
1261"                             opened. The default value is 0 seconds, which \n"
1262"                             tells pknotify to wait indefinitely.\n"
1263"                             Use this option to avoid having an user who\n"
1264"                             leaved his computer stall a whole print queue.\n"
1265"                             \n"
1266"  You MUST specify either --ask, --confirm, --notify or --quit.\n"
1267"\n"
1268"  arguments :             \n"
1269"  \n"
1270"    -a | --ask : Several arguments are accepted, of the form\n"
1271"                 \"label:varname:defaultvalue\". The result will\n"
1272"                 be printed to stdout in the following format :\n"
1273"                 VAR1NAME=VAR1VALUE\n"
1274"                 VAR2NAME=VAR2VALUE\n"
1275"                 ...\n"
1276"                 If the dialog was cancelled, nothing will be\n"
1277"                 printed. If one of the varname is 'password'\n"
1278"                 then this field is asked as a password (you won't\n"
1279"                 see what you type in), and is NOT printed. Although\n"
1280"                 it is not printed, it will be used to check if\n"
1281"                 authentication is valid if you specify --checkauth.\n"
1282"                 \n"
1283"    -c | --confirm : A single argument is expected, representing the\n"
1284"                     message to display. If the dialog is confirmed\n"
1285"                     then pknotify will print OK, else CANCEL.\n"
1286"                     \n"
1287"    -n | --notify : A single argument is expected, representing "
1288"the                 \n"
1289"                    message to display. In this case pknotify will\n"
1290"                    always print OK.\n"
1291"                    \n"
1292"examples :                    \n"
1293"\n"
1294"  pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 "
1295"credits\"\n"
1296"  \n"
1297"  Would display the cost of the print job and asks for confirmation.\n"
1298"  If the end user doesn't have PyKotIcon running and accepting connections\n"
1299"  from the print server, PyKota will consider that the end user accepted\n"
1300"  to print this job.\n"
1301"  \n"
1302"  pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n"
1303"           --checkauth --ask \"Your name:username:\" \"Your password:"
1304"password:\"\n"
1305"           \n"
1306"  Asks an username and password, and checks if they are valid.         \n"
1307"  NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n"
1308"  only set if you launch pknotify from cupspykota through a directive\n"
1309"  in ~pykota/pykota.conf\n"
1310"  \n"
1311"  The TCP port you'll use must be reachable on the client from the\n"
1312"  print server.\n"
1313msgstr ""
1314
1315msgid "You MUST install PyPAM for this functionnality to work !"
1316msgstr ""
1317
1318#, python-format
1319msgid "Authentication error for user %s : %s"
1320msgstr ""
1321
1322#, python-format
1323msgid "Internal error : can't authenticate user %s"
1324msgstr ""
1325
1326#, python-format
1327msgid "Password correct for user %s"
1328msgstr ""
1329
1330#, python-format
1331msgid ""
1332"The end user at %s:%i didn't answer within %i seconds. The print job will be "
1333"cancelled."
1334msgstr ""
1335
1336#, python-format
1337msgid ""
1338"Are you sure that PyKotIcon is running and accepting incoming connections on "
1339"%s:%s ?"
1340msgstr ""
1341
1342msgid "Connection error"
1343msgstr ""
1344
1345msgid "some options are mandatory, see help."
1346msgstr ""
1347
1348msgid "incorrect value for the --noremote command line switch, see help."
1349msgstr ""
1350
1351msgid "some options require arguments, see help."
1352msgstr ""
1353
1354#, python-format
1355msgid ""
1356"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1357"\n"
1358"A Printers Manager for PyKota.\n"
1359"\n"
1360"command line usage :\n"
1361"\n"
1362"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
1363"\n"
1364"options :\n"
1365"\n"
1366"  -v | --version       Prints pkprinters's version number then exits.\n"
1367"  -h | --help          Prints this message then exits.\n"
1368"  \n"
1369"  -a | --add           Adds printers if they don't exist on the Quota \n"
1370"                       Storage Server. If they exist, they are modified\n"
1371"                       unless -s|--skipexisting is also used.\n"
1372"                       \n"
1373"  -d | --delete        Deletes printers from the quota storage.\n"
1374"  \n"
1375"  -D | --description d Adds a textual description to printers.\n"
1376"\n"
1377"  -C | --cups          Also modifies the DeviceURI in CUPS' printers.conf\n"
1378"\n"
1379"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
1380"                       Job price is optional.\n"
1381"                       If both are to be set, separate them with a comma.\n"
1382"                       Floating point and negative values are allowed.\n"
1383"  \n"
1384"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
1385"                       groups pg1, pg2, etc... which must already exist.\n"
1386"                       A printer group is just like a normal printer,\n"
1387"                       only that it is usually unknown from the printing\n"
1388"                       system. Create printer groups exactly the same\n"
1389"                       way that you create printers, then add other \n"
1390"                       printers to them with this option.\n"
1391"                       Accounting is done on a printer and on all\n"
1392"                       the printer groups it belongs to, quota checking\n"
1393"                       is done on a printer and on all the printer groups\n"
1394"                       it belongs to.\n"
1395"                       If the --remove option below is not used, the \n"
1396"                       default action is to add printers to the specified\n"
1397"                       printer groups.\n"
1398"                       \n"
1399"  -l | --list          List informations about the printer(s) and the\n"
1400"                       printers groups it is a member of.\n"
1401"                       \n"
1402"  -r | --remove        In combination with the --groups option "
1403"above,                       \n"
1404"                       remove printers from the specified printers groups.\n"
1405"                       \n"
1406"  -s | --skipexisting  In combination with the --add option above, tells\n"
1407"                       pkprinters to not modify existing printers.\n"
1408"                       \n"
1409"  -m | --maxjobsize s  Sets the maximum job size allowed on the printer\n"
1410"                       to s pages.\n"
1411"                       \n"
1412"  -p | --passthrough   Activate passthrough mode for the printer. In this\n"
1413"                       mode, users are allowed to print without any impact\n"
1414"                       on their quota or account balance.\n"
1415"                       \n"
1416"  -n | --nopassthrough Deactivate passthrough mode for the printer.\n"
1417"                       Without -p or -n, printers are created in \n"
1418"                       normal mode, i.e. no passthrough.\n"
1419"  \n"
1420"  printer1 through printerN can contain wildcards if the --add option \n"
1421"  is not set.\n"
1422"  \n"
1423"examples :                              \n"
1424"\n"
1425"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
1426"hp8000\n"
1427"  \n"
1428"  Will create three printers named hp2100, hp2200 and hp8000.\n"
1429"  Their price per page will be set at 0.05 unit, and their price\n"
1430"  per job will be set at 0.1 unit. Units are in your own currency,\n"
1431"  or whatever you want them to mean.\n"
1432"  All of their descriptions will be set to the string \"HP Printer\".\n"
1433"  If any of these printers already exists, it will also be modified \n"
1434"  unless the -s|--skipexisting command line option is also used.\n"
1435"            \n"
1436"  $ pkprinters --delete \"*\"\n"
1437"  \n"
1438"  This will completely delete all printers and associated quota "
1439"information,\n"
1440"  as well as their job history. USE WITH CARE !\n"
1441"  \n"
1442"  $ pkprinters --groups Laser,HP \"hp*\"\n"
1443"  \n"
1444"  This will put all printers which name matches \"hp*\" into printers "
1445"groups \n"
1446"  Laser and HP, which MUST already exist.\n"
1447"  \n"
1448"  $ pkprinters --groups LexMark --remove hp2200\n"
1449"  \n"
1450"  This will remove the hp2200 printer from the LexMark printer group.\n"
1451msgstr ""
1452
1453#, python-format
1454msgid "Passthrough mode : %s"
1455msgstr ""
1456
1457#, python-format
1458msgid "Routed through PyKota : %s"
1459msgstr ""
1460
1461msgid "YES"
1462msgstr ""
1463
1464msgid "NO"
1465msgstr ""
1466
1467msgid "in"
1468msgstr "�
1469msgid "Rerouting printers to CUPS"
1470msgstr ""
1471
1472#, python-format
1473msgid "Invalid charge amount value %s"
1474msgstr "� ���� ��%s"
1475
1476#, python-format
1477msgid "Invalid maximum job size value %s"
1478msgstr ""
1479
1480#, python-format
1481msgid "Printer %s already exists, skipping."
1482msgstr "���� %s �������
1483#, python-format
1484msgid "Printer %s already exists, will be modified."
1485msgstr "���� %s ���������"
1486
1487#, python-format
1488msgid "Invalid printer name %s"
1489msgstr "� ������� %s"
1490
1491msgid "You have to pass printer groups names on the command line"
1492msgstr "������� ���������� ���
1493msgid "You have to pass printer names on the command line"
1494msgstr "������� ������������
1495#, python-format
1496msgid ""
1497"pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1498"\n"
1499"Refunds jobs.\n"
1500"\n"
1501"command line usage :\n"
1502"\n"
1503"  pkrefund [options] [filterexpr]\n"
1504"\n"
1505"options :\n"
1506"\n"
1507"  -v | --version       Prints pkrefund's version number then exits.\n"
1508"  -h | --help          Prints this message then exits.\n"
1509"  \n"
1510"  -f | --force         Doesn't ask for confirmation before refunding jobs.\n"
1511"  -r | --reason txt    Sets textual information to explain the refunding.\n"
1512"\n"
1513"  -l | --logo img      Use the image as the receipt's logo. The logo will\n"
1514"                       be drawn at the center top of the page. The default\n"
1515"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
1516"\n"
1517"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
1518"                       page sizes are recognized, like 'A4' or 'Letter'\n"
1519"                       to name a few. The default size is A4.\n"
1520"\n"
1521"  -n | --number N      Sets the number of the first receipt. This number\n"
1522"                       will automatically be incremented for each receipt.\n"
1523"\n"
1524"  -o | --output f.pdf  Defines the name of the PDF file which will contain\n"
1525"                       the receipts. If not set, then no PDF file will\n"
1526"                       be created. If set to '-', then --force is assumed,\n"
1527"                       and the PDF document is sent to standard output.\n"
1528"\n"
1529"  -u | --unit u        Defines the name of the unit to use on the receipts.\n"
1530"                       The default unit is 'Credits', optionally translated\n"
1531"                       to your native language if it is supported by "
1532"PyKota.\n"
1533"  \n"
1534"\n"
1535"  Use the filter expressions to extract only parts of the \n"
1536"  datas. Allowed filters are of the form :\n"
1537"                \n"
1538"         key=value\n"
1539"                         \n"
1540"  Allowed keys for now are :  \n"
1541"                       \n"
1542"         username       User's name\n"
1543"         printername    Printer's name\n"
1544"         hostname       Client's hostname\n"
1545"         jobid          Job's Id\n"
1546"         billingcode    Job's billing code\n"
1547"         start          Job's date of printing\n"
1548"         end            Job's date of printing\n"
1549"         \n"
1550"  Dates formatting with 'start' and 'end' filter keys :\n"
1551"  \n"
1552"    YYYY : year boundaries\n"
1553"    YYYYMM : month boundaries\n"
1554"    YYYYMMDD : day boundaries\n"
1555"    YYYYMMDDhh : hour boundaries\n"
1556"    YYYYMMDDhhmm : minute boundaries\n"
1557"    YYYYMMDDhhmmss : second boundaries\n"
1558"    yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-"
1559"15)\n"
1560"    today[+-NbDays] : today more or less N days (e.g. : today-15)\n"
1561"    tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n"
1562"    now[+-NbDays] : now more or less N days (e.g. now-15)\n"
1563"\n"
1564"  'now' and 'today' are not exactly the same since today represents the "
1565"first\n"
1566"  or last second of the day depending on if it's used in a start= or end=\n"
1567"  date expression. The utility to be able to specify dates in the future is\n"
1568"  a question which remains to be answered :-)\n"
1569"  \n"
1570"  Contrary to other PyKota management tools, wildcard characters are not \n"
1571"  expanded, so you can't use them.\n"
1572"  \n"
1573"Examples :\n"
1574"\n"
1575"  $ pkrefund --output /tmp/receipts.pdf jobid=503\n"
1576"  \n"
1577"  This will refund all jobs which Id is 503. BEWARE : installing CUPS\n"
1578"  afresh will reset the first job id at 1, so you probably want to use\n"
1579"  a more precise filter as explained below. A confirmation will\n"
1580"  be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n"
1581"  will be created which will contain printable receipts.\n"
1582"  \n"
1583"  $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n"
1584"  \n"
1585"  Refunds all jobs which id is 503 but which were printed during the\n"
1586"  past week. The reason will be marked as being an hardware problem.\n"
1587"  \n"
1588"  $ pkrefund --force username=jerome printername=HP2100\n"
1589"  \n"
1590"  Refunds all jobs printed by user jerome on printer HP2100. No\n"
1591"  confirmation will be asked.\n"
1592"  \n"
1593"  $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n"
1594"  \n"
1595"  Refunds all jobs printed on printer HP2100 between February 1st 2006\n"
1596"  and yesterday. No confirmation will be asked.\n"
1597msgstr ""
1598
1599msgid "Refunding receipt"
1600msgstr ""
1601
1602msgid "Jobs refunded"
1603msgstr ""
1604
1605msgid "Pages refunded"
1606msgstr ""
1607
1608msgid "Amount refunded"
1609msgstr ""
1610
1611msgid "Reason"
1612msgstr ""
1613
1614msgid "Here's the receipt for the refunding of your print jobs"
1615msgstr ""
1616
1617msgid "Generating receipts"
1618msgstr ""
1619
1620msgid ""
1621"Refunding for no reason is forbidden. Please use the --reason command line "
1622"option."
1623msgstr ""
1624
1625msgid ""
1626"The PDF file containing the receipts will be sent to stdout. --force is "
1627"assumed."
1628msgstr ""
1629
1630#, python-format
1631msgid "Date : %s"
1632msgstr ""
1633
1634#, python-format
1635msgid "JobId : %s"
1636msgstr ""
1637
1638#, python-format
1639msgid "User : %s"
1640msgstr ""
1641
1642#, python-format
1643msgid "Printer : %s"
1644msgstr ""
1645
1646#, python-format
1647msgid "Billing code : %s"
1648msgstr ""
1649
1650#, python-format
1651msgid "Pages : %i"
1652msgstr ""
1653
1654#, python-format
1655msgid "Credits : %.3f"
1656msgstr ""
1657
1658#, python-format
1659msgid "Title : %s"
1660msgstr ""
1661
1662msgid "Refund (Y/N)"
1663msgstr ""
1664
1665msgid "Y"
1666msgstr ""
1667
1668msgid "N"
1669msgstr ""
1670
1671#, python-format
1672msgid "Refunded %i users for %i jobs, %i pages and %.3f credits"
1673msgstr ""
1674
1675#, python-format
1676msgid ""
1677"pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1678"\n"
1679"A turn key tool for PyKota. When launched, this command will initialize\n"
1680"PyKota's database with all existing print queues and some or all users.\n"
1681"For now, no prices or limits are set, so printing is fully accounted\n"
1682"for, but not limited. That's why you'll probably want to also use\n"
1683"edpykota once the database has been initialized.\n"
1684"\n"
1685"command line usage :\n"
1686"\n"
1687"  pkturnkey [options] [printqueues names]\n"
1688"\n"
1689"options :\n"
1690"\n"
1691"  -v | --version       Prints pkturnkey version number then exits.\n"
1692"  -h | --help          Prints this message then exits.\n"
1693"  \n"
1694"  -c | --doconf        Give hints about what to put into pykota.conf\n"
1695"  \n"
1696"  -d | --dousers       Manages users accounts as well.\n"
1697"  \n"
1698"  -D | --dogroups      Manages users groups as well.\n"
1699"                       Implies -d | --dousers.\n"
1700"  \n"
1701"  -e | --emptygroups   Includes empty groups.\n"
1702"  \n"
1703"  -f | --force         Modifies the database instead of printing what\n"
1704"                       it would do.\n"
1705"                       \n"
1706"  -u | --uidmin uid    Only adds users whose uid is greater than or equal "
1707"to\n"
1708"                       uid. You can pass an username there as well, and its\n"
1709"                       uid will be used automatically.\n"
1710"                       If not set, 0 will be used automatically.\n"
1711"                       Implies -d | --dousers.\n"
1712"                       \n"
1713"  -U | --uidmax uid    Only adds users whose uid is lesser than or equal to\n"
1714"                       uid. You can pass an username there as well, and its\n"
1715"                       uid will be used automatically.\n"
1716"                       If not set, a large value will be used "
1717"automatically.\n"
1718"                       Implies -d | --dousers.\n"
1719"\n"
1720"  -g | --gidmin gid    Only adds groups whose gid is greater than or equal "
1721"to\n"
1722"                       gid. You can pass a groupname there as well, and its\n"
1723"                       gid will be used automatically.\n"
1724"                       If not set, 0 will be used automatically.\n"
1725"                       Implies -D | --dogroups.\n"
1726"                       \n"
1727"  -G | --gidmax gid    Only adds groups whose gid is lesser than or equal "
1728"to\n"
1729"                       gid. You can pass a groupname there as well, and its\n"
1730"                       gid will be used automatically.\n"
1731"                       If not set, a large value will be used "
1732"automatically.\n"
1733"                       Implies -D | --dogroups.\n"
1734"\n"
1735"examples :                              \n"
1736"\n"
1737"  $ pkturnkey --dousers --uidmin jerome\n"
1738"\n"
1739"  Will simulate the initialization of PyKota's database will all existing\n"
1740"  printers and print accounts for all users whose uid is greater than\n"
1741"  or equal to jerome's one. Won't manage any users group.\n"
1742"  \n"
1743"  To REALLY initialize the database instead of simulating it, please\n"
1744"  use the -f | --force command line switch.\n"
1745"  \n"
1746"  You can limit the initialization to only a subset of the existing\n"
1747"  printers, by passing their names at the end of the command line.\n"
1748msgstr ""
1749
1750#, python-format
1751msgid ""
1752"Printer %s is not managed by PyKota yet. Please modify printers.conf and "
1753"restart CUPS."
1754msgstr ""
1755
1756msgid "Please be patient..."
1757msgstr ""
1758
1759msgid "Don't worry, the database WILL NOT BE MODIFIED."
1760msgstr ""
1761
1762msgid "Please WORRY NOW, the database WILL BE MODIFIED."
1763msgstr ""
1764
1765msgid "System users will have a print account as well !"
1766msgstr ""
1767
1768#, python-format
1769msgid "Unknown username %s : %s"
1770msgstr ""
1771
1772msgid "System groups will have a print account as well !"
1773msgstr ""
1774
1775#, python-format
1776msgid "Unknown groupname %s : %s"
1777msgstr ""
1778
1779msgid "Simulation terminated."
1780msgstr ""
1781
1782msgid "Database initialized !"
1783msgstr ""
1784
1785msgid "The --uidmin or --uidmax command line option implies --dousers as well."
1786msgstr ""
1787
1788msgid ""
1789"The --gidmin or --gidmax command line option implies --dogroups as well."
1790msgstr ""
1791
1792msgid "The --dogroups command line option implies --dousers as well."
1793msgstr ""
1794
1795#, python-format
1796msgid ""
1797"pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n"
1798"\n"
1799"An Users and Groups Manager for PyKota.\n"
1800"\n"
1801"command line usage :\n"
1802"\n"
1803"  pkusers [options] user1 user2 user3 ... userN\n"
1804"  \n"
1805"or :  \n"
1806"\n"
1807"  pkusers --groups [options] group1 group2 group3 ... groupN\n"
1808"\n"
1809"options :\n"
1810"\n"
1811"  -v | --version       Prints pkusers's version number then exits.\n"
1812"  -h | --help          Prints this message then exits.\n"
1813"  \n"
1814"  -a | --add           Adds users if they don't exist on the database.\n"
1815"                       If they exist, they are modified unless\n"
1816"                       -s|--skipexisting is also used.\n"
1817"                       \n"
1818"  -d | --delete        Deletes users from the quota storage.\n"
1819"\n"
1820"  -e | --email addr    Sets the email address for the users.\n"
1821"                       If the addr parameter begins with @, then\n"
1822"                       the username is prepended to addr to form\n"
1823"                       a valid email address.\n"
1824"\n"
1825"  -D | --description d Adds a textual description to users or groups.\n"
1826"                       \n"
1827"  -g | --groups        Edit users groups instead of users.\n"
1828"                          \n"
1829"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
1830"                       when computing the cost of a print job. Positive or \n"
1831"                       negative floating point values are allowed,\n"
1832"                       this allows you to do some really creative\n"
1833"                       things like giving money to an user whenever\n"
1834"                       he prints. The number of pages in a print job\n"
1835"                       is not modified by this coefficient, only the\n"
1836"                       cost of the job for a particular user.\n"
1837"                       Only users have such a coefficient.\n"
1838"  \n"
1839"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
1840"                              listed, separated by commas. The groups\n"
1841"                              must already exist in the Quota Storage.\n"
1842"                       \n"
1843"  -L | --list          Lists users or groups.\n"
1844"  \n"
1845"  -l | --limitby l     Choose if the user/group is limited in "
1846"printing                     \n"
1847"                       by its account balance or by its page quota.\n"
1848"                       The default value is 'quota'. Allowed values\n"
1849"                       are 'quota' 'balance' 'noquota' 'noprint' \n"
1850"                       and 'nochange' :\n"
1851"                       \n"
1852"                         - quota : limit by number of pages per printer.\n"
1853"                         - balance : limit by number of credits in account.\n"
1854"                         - noquota : no limit, accounting still done.\n"
1855"                         - nochange : no limit, accounting not done. \n"
1856"                         - noprint : printing is denied. \n"
1857"                       NB : nochange and noprint are not supported for "
1858"groups.\n"
1859"                       \n"
1860"  -b | --balance b     Sets the user's account balance to "
1861"b.                     \n"
1862"                       Account balance may be increase or decreased\n"
1863"                       if b is prefixed with + or -.\n"
1864"                       WARNING : when decreasing account balance,\n"
1865"                       the total paid so far by the user is decreased\n"
1866"                       too.\n"
1867"                       Groups don't have a real balance, but the\n"
1868"                       sum of their users' account balance.\n"
1869"                       \n"
1870"  -C | --comment txt   Defines some informational text to be associated\n"
1871"                       with a change to an user's account balance.\n"
1872"                       Only meaningful if -b | --balance is also used.\n"
1873"                       \n"
1874"                       \n"
1875"  -r | --remove        In combination with the --ingroups option "
1876"above,                       \n"
1877"                       remove users from the specified users groups.\n"
1878"                       \n"
1879"  -s | --skipexisting  In combination with the --add option above, tells\n"
1880"                       pkusers to not modify existing users.\n"
1881"                       \n"
1882"  user1 through userN and group1 through groupN can use wildcards\n"
1883"  if the --add option is not set.\n"
1884"  \n"
1885"examples :                              \n"
1886"\n"
1887"  $ pkusers --add john paul george ringo/ringo@example.com\n"
1888"  \n"
1889"  This will add users john, paul, george and ringo to the quota\n"
1890"  database. User ringo's email address will also be set to \n"
1891"  'ringo@example.com'\n"
1892"  \n"
1893"  $ pkusers --ingroups coders,it jerome\n"
1894"  \n"
1895"  User jerome is put into the groups \"coders\" and \"it\" which must\n"
1896"  already exist in the quota database.\n"
1897"            \n"
1898"  $ pkusers --limitby balance jerome\n"
1899"  \n"
1900"  This will tell PyKota to limit jerome by his account's balance\n"
1901"  when printing.\n"
1902"  \n"
1903"  $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n"
1904"  \n"
1905"  This will increase jerome's account balance by 10.0 (in your\n"
1906"  own currency). You can decrease the account balance with a\n"
1907"  dash prefix, and set it to a fixed amount with no prefix.\n"
1908"  A comment will be stored for this balance change.\n"
1909"  \n"
1910"  $ pkusers --delete jerome rachel\n"
1911"  \n"
1912"  This will completely delete jerome and rachel from the quota\n"
1913"  database. All their quotas and jobs will be deleted too.\n"
1914"  \n"
1915"  $ pkusers --overcharge 2.5 poorstudent\n"
1916"  \n"
1917"  This will overcharge the poorstudent user by a factor of 2.5.\n"
1918"  \n"
1919"  $ pkusers --overcharge -1 jerome\n"
1920"  \n"
1921"  User jerome will actually earn money whenever he prints.\n"
1922"  \n"
1923"  $ pkusers --overcharge 0 boss\n"
1924"  \n"
1925"  User boss can print at will, it won't cost him anything because the\n"
1926"  cost of each print job will be multiplied by zero before charging\n"
1927"  his account.\n"
1928"\n"
1929"  $ pkusers --email @example.com\n"
1930"\n"
1931"  This will set the email address for each user to username@example.com\n"
1932msgstr ""
1933
1934#, python-format
1935msgid "Invalid email address %s"
1936msgstr "� ������-mail %s"
1937
1938#, python-format
1939msgid "There's no %s matching %s"
1940msgstr ""
1941
1942#, python-format
1943msgid "Limited by : %s"
1944msgstr ""
1945
1946#, python-format
1947msgid "Account balance : %.2f"
1948msgstr ""
1949
1950#, python-format
1951msgid "Total paid so far : %.2f"
1952msgstr ""
1953
1954#, python-format
1955msgid "Overcharging factor : %.2f"
1956msgstr ""
1957
1958#, python-format
1959msgid "Group balance : %.2f"
1960msgstr ""
1961
1962#, python-format
1963msgid "Invalid limitby value %s"
1964msgstr "� ���� limitby %s"
1965
1966#, python-format
1967msgid "Invalid overcharge value %s"
1968msgstr ""
1969
1970#, python-format
1971msgid "Invalid balance value %s"
1972msgstr "� ���� ���%s"
1973
1974#, python-format
1975msgid "There's no users group matching %s"
1976msgstr ""
1977
1978#, python-format
1979msgid "Unknown group %s"
1980msgstr ""
1981
1982#, python-format
1983msgid "Unknown user %s"
1984msgstr ""
1985
1986#, python-format
1987msgid "%s %s already exists, skipping."
1988msgstr ""
1989
1990#, python-format
1991msgid "%s %s already exists, will be modified."
1992msgstr ""
1993
1994#, python-format
1995msgid "Invalid name %s"
1996msgstr ""
1997
1998msgid "You have to pass user groups names on the command line"
1999msgstr ""
2000
2001#, python-format
2002msgid ""
2003"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
2004"\n"
2005"An OSD quota monitor for PyKota.\n"
2006"\n"
2007"command line usage :\n"
2008"\n"
2009"  pykosd [options]\n"
2010"\n"
2011"options :\n"
2012"\n"
2013"  -v | --version       Prints pykosd's version number then exits.\n"
2014"  -h | --help          Prints this message then exits.\n"
2015"  \n"
2016"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
2017"                       triplet, for example #FF0000 is 100%% red.\n"
2018"                       Defaults to 100%% green (#00FF00).\n"
2019"                       \n"
2020"  -d | --duration d    Sets the duration of the display in seconds. \n"
2021"                       Defaults to 3 seconds.\n"
2022"                       \n"
2023"  -f | --font f        Sets the font to use for "
2024"display.                      \n"
2025"                       Defaults to the Python OSD library's default.\n"
2026"  \n"
2027"  -l | --loop n        Sets the number of times the info will be displayed.\n"
2028"                       Defaults to 0, which means loop forever.\n"
2029"                       \n"
2030"  -s | --sleep s       Sets the sleeping duration between two displays \n"
2031"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
2032"                       \n"
2033"  \n"
2034"examples :                              \n"
2035"\n"
2036"  $ pykosd -s 60 --loop 5\n"
2037"  \n"
2038"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
2039"  and will last for 3 seconds (the default) each time. After five\n"
2040"  iterations, the program will exit.\n"
2041msgstr ""
2042
2043#, python-format
2044msgid "Invalid duration option %s"
2045msgstr "� ���������%s"
2046
2047#, python-format
2048msgid "Invalid loop option %s"
2049msgstr "� ����������"
2050
2051#, python-format
2052msgid "Invalid sleep option %s"
2053msgstr "� ��������� %s"
2054
2055#, python-format
2056msgid "Invalid color option %s"
2057msgstr "� ���������"
2058
2059#, python-format
2060msgid "User %s doesn't exist in PyKota's database"
2061msgstr "���%s � ���������Kota"
2062
2063#, python-format
2064msgid "Pages used on %s : %s"
2065msgstr "��� �� � %s : %s"
2066
2067#, python-format
2068msgid "PyKota Units left : %.2f"
2069msgstr "���PyKota ���� : %.2f"
2070
2071msgid "Printing denied."
2072msgstr ""
2073
2074msgid "Printing not limited."
2075msgstr ""
2076
2077msgid "Printing not limited, no accounting."
2078msgstr ""
2079
2080#, python-format
2081msgid ""
2082"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
2083"\n"
2084"Gives print quotes to users.\n"
2085"\n"
2086"command line usage :\n"
2087"\n"
2088"  pykotme  [options]  [files]\n"
2089"\n"
2090"options :\n"
2091"\n"
2092"  -v | --version       Prints pykotme's version number then exits.\n"
2093"  -h | --help          Prints this message then exits.\n"
2094"  \n"
2095"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
2096"                       use wildcards characters to select only\n"
2097"                       some printers. The default value is *, meaning\n"
2098"                       all printers.\n"
2099"                       You can specify several names or wildcards, \n"
2100"                       by separating them with commas.\n"
2101"  \n"
2102"examples :                              \n"
2103"\n"
2104"  $ pykotme --printer apple file1.ps file2.ps\n"
2105"  \n"
2106"  This will give a print quote to the current user. The quote will show\n"
2107"  the price and size of a job consisting in file1.ps and file2.ps \n"
2108"  which would be sent to the apple printer.\n"
2109"  \n"
2110"  $ pykotme --printer apple,hplaser <file1.ps\n"
2111"  \n"
2112"  This will give a print quote to the current user. The quote will show\n"
2113"  the price and size of a job consisting in file1.ps as read from\n"
2114"  standard input, which would be sent to the apple or hplaser\n"
2115"  printer.\n"
2116"\n"
2117"  $ pykotme \n"
2118"  \n"
2119"  This will give a quote for a job consisting of what is on standard \n"
2120"  input. The quote will list the job size, and the price the job\n"
2121"  would cost on each printer.\n"
2122msgstr ""
2123
2124#, python-format
2125msgid "Your account balance : %.2f"
2126msgstr "� ���������: %.2f"
2127
2128#, python-format
2129msgid "Job size : %i pages"
2130msgstr "������: %i ��"
2131
2132#, python-format
2133msgid "Cost on printer %s : %.2f"
2134msgstr "��� ���%s : %.2f"
2135
2136msgid "won't be charged, printer is in passthrough mode"
2137msgstr ""
2138
2139msgid "won't be charged, your account is immutable"
2140msgstr ""
2141
2142#, python-format
2143msgid "Unsupported accounter backend %s"
2144msgstr "� ���� �� ���� %s"
2145
2146#, python-format
2147msgid ""
2148"Configuration file %s can't be read. Please check that the file exists and "
2149"that your permissions are sufficient."
2150msgstr ""
2151
2152#, python-format
2153msgid "Configuration file %s not found."
2154msgstr "� �������� %s."
2155
2156#, python-format
2157msgid "Option %s not found in section global of %s"
2158msgstr "����%s ������� global �%s"
2159
2160#, python-format
2161msgid "Option %s not found in section %s of %s"
2162msgstr "����%s ������� %s �%s"
2163
2164#, python-format
2165msgid "Option ldaptls is set, but certificate %s is not readable."
2166msgstr ""
2167
2168#, python-format
2169msgid "Option logger only supports values in %s"
2170msgstr "����logger ��� �����"
2171
2172#, python-format
2173msgid "Invalid preaccounter %s for printer %s"
2174msgstr ""
2175
2176#, python-format
2177msgid "Option preaccounter in section %s only supports values in %s"
2178msgstr ""
2179
2180#, python-format
2181msgid "Invalid accounter %s for printer %s"
2182msgstr "� �������� � ����%s"
2183
2184#, python-format
2185msgid "Option accounter in section %s only supports values in %s"
2186msgstr ""
2187"�������� � �� %s ��� �����"
2188
2189#, python-format
2190msgid "Invalid unknown_billingcode directive %s for printer %s"
2191msgstr ""
2192
2193#, python-format
2194msgid "Directive unknown_billingcode in section %s only supports values in %s"
2195msgstr ""
2196
2197#, python-format
2198msgid "Option enforcement in section %s only supports values in %s"
2199msgstr "����enforcement � �� %s ��� �����"
2200
2201#, python-format
2202msgid ""
2203"Option onbackenderror in section %s only supports values 'charge', "
2204"'nocharge', and 'retry:num:delay'"
2205msgstr ""
2206
2207#, python-format
2208msgid "Option onaccountererror in section %s only supports values in %s"
2209msgstr "����onaccounterror ���s ��� �����"
2210
2211#, python-format
2212msgid "Option policy in section %s only supports values in %s"
2213msgstr "����policy � �� %s ��� �����"
2214
2215#, python-format
2216msgid "Invalid option mailto %s for printer %s"
2217msgstr "� ������mailto %s � ����%s"
2218
2219#, python-format
2220msgid "Option mailto in section %s only supports values in %s"
2221msgstr "����mailto � ��  %s ��� �����"
2222
2223#, python-format
2224msgid "Invalid maximal deny banners counter %s"
2225msgstr ""
2226
2227#, python-format
2228msgid "Invalid grace delay %s"
2229msgstr "� ��������"
2230
2231#, python-format
2232msgid "Invalid poor man's threshold %s"
2233msgstr "� �����poor man's %s"
2234
2235#, python-format
2236msgid "Invalid balancezero value %s"
2237msgstr ""
2238
2239msgid ""
2240"Your Print Quota account balance is Low.\n"
2241"Soon you'll not be allowed to print anymore.\n"
2242"Please contact the Print Quota Administrator to solve the problem."
2243msgstr ""
2244"� ��������� �����\n"
2245"������������ ��n"
2246"�����������������."
2247
2248#, python-format
2249msgid ""
2250"You are not allowed to print anymore because\n"
2251"your Print Quota is exceeded on printer %s."
2252msgstr ""
2253"��������������n"
2254"�� �� ����� �� ���%s."
2255
2256#, python-format
2257msgid ""
2258"You will soon be forbidden to print anymore because\n"
2259"your Print Quota is almost reached on printer %s."
2260msgstr ""
2261"������������� ��"
2262"�� ����������� ���%s."
2263
2264#, python-format
2265msgid "Incorrect value %s for the duplicatesdelay directive in section %s"
2266msgstr ""
2267
2268#, python-format
2269msgid "Incorrect value %s for the noprintingmaxdelay directive in section %s"
2270msgstr ""
2271
2272#, python-format
2273msgid "Option accountbanner in section %s only supports values in %s"
2274msgstr ""
2275
2276#, python-format
2277msgid "Option trustjobsize for printer %s is incorrect"
2278msgstr ""
2279
2280msgid "History"
2281msgstr "���
2282
2283msgid "Users"
2284msgstr ""
2285
2286msgid "Groups"
2287msgstr ""
2288
2289msgid "Printers"
2290msgstr ""
2291
2292msgid "Users Print Quotas"
2293msgstr ""
2294
2295msgid "Users Groups Print Quotas"
2296msgstr ""
2297
2298msgid "History of Payments"
2299msgstr ""
2300
2301msgid "Printers Groups Membership"
2302msgstr ""
2303
2304msgid "Users Groups Membership"
2305msgstr ""
2306
2307msgid "Billing Codes"
2308msgstr ""
2309
2310msgid "All"
2311msgstr ""
2312
2313msgid "Comma Separated Values"
2314msgstr ""
2315
2316msgid "Semicolon Separated Values"
2317msgstr ""
2318
2319msgid "Tabulation Separated Values"
2320msgstr ""
2321
2322msgid "eXtensible Markup Language"
2323msgstr ""
2324
2325msgid "CUPS' page_log"
2326msgstr ""
2327
2328#, python-format
2329msgid "Invalid modifier [%s] for --data command line option, see help."
2330msgstr "� �� �� [%s] � ����-data, �����."
2331
2332msgid ""
2333"Dumping all PyKota's datas forces format to XML, and disables --sum and "
2334"filters."
2335msgstr ""
2336
2337#, python-format
2338msgid "Invalid modifier [%s] for --format command line option, see help."
2339msgstr "� �� �� [%s] � ����-format, �����."
2340
2341msgid "XML output is disabled because the jaxml module is not available."
2342msgstr "���� XML ��������������axml."
2343
2344#, python-format
2345msgid "Invalid data type [%s] for --sum command line option, see help."
2346msgstr ""
2347
2348msgid "PyKota data dumper failed : I/O error"
2349msgstr "������� �PyKota �� : �������
2350
2351#, python-format
2352msgid "Unsupported logging subsystem %s"
2353msgstr "� ���� �� ����"
2354
2355#, python-format
2356msgid "Report for %s quota on printer %s"
2357msgstr "�����s � ���%s"
2358
2359#, python-format
2360msgid "Pages grace time: %i days"
2361msgstr "�������: %i ��
2362
2363#, python-format
2364msgid "Price per job: %.3f"
2365msgstr "��� ���%.3f"
2366
2367#, python-format
2368msgid "Price per page: %.3f"
2369msgstr "��� �� %.3f"
2370
2371msgid ""
2372"Group          overcharge   used    soft    hard    balance grace         "
2373"total       paid warn"
2374msgstr ""
2375
2376msgid ""
2377"User           overcharge   used    soft    hard    balance grace         "
2378"total       paid warn"
2379msgstr ""
2380
2381msgid "unknown"
2382msgstr "���
2383#, python-format
2384msgid "Real : %s"
2385msgstr "����: %s"
2386
2387#, python-format
2388msgid "Total : %9i"
2389msgstr "��� %9i"
2390
2391msgid "N/A"
2392msgstr ""
2393
2394#, python-format
2395msgid "Unsupported reporter backend %s"
2396msgstr "� ���� �� ���s"
2397
2398#, python-format
2399msgid "Refunded %i pages and %.3f credits by %s (%s) on %s"
2400msgstr ""
2401
2402#, python-format
2403msgid "Unsupported quota storage backend %s"
2404msgstr "� ���� �� ����%s"
2405
2406msgid "Done"
2407msgstr ""
2408
2409msgid "Average speed"
2410msgstr ""
2411
2412msgid "entries per second"
2413msgstr ""
2414
2415#, python-format
2416msgid "Strange problem with uid(%s) : %s"
2417msgstr ""
2418
2419#, python-format
2420msgid "Running as user '%s'."
2421msgstr ""
2422
2423msgid "No user named 'pykota'. Not dropping priviledges."
2424msgstr ""
2425
2426#, python-format
2427msgid "Impossible to drop priviledges : %s"
2428msgstr ""
2429
2430msgid "Priviledges dropped. Now running as user 'pykota'."
2431msgstr ""
2432
2433#, python-format
2434msgid "Impossible to regain priviledges : %s"
2435msgstr ""
2436
2437msgid "Regained priviledges. Now running as root."
2438msgstr ""
2439
2440msgid "Please report bugs to :"
2441msgstr ""
2442
2443#, python-format
2444msgid ""
2445"\n"
2446"\n"
2447"Please contact your system administrator :\n"
2448"\n"
2449"\t%s - <%s>\n"
2450msgstr ""
2451"\n"
2452"\n"
2453"������������������n"
2454"\n"
2455"\t%s - <%s>\n"
2456
2457#, python-format
2458msgid "Unable to match user %s on printer %s, applying default policy (%s)"
2459msgstr ""
2460"������s � ���%s, ����� ���s)"
2461
2462#, python-format
2463msgid ""
2464"Unable to find user %s's account balance, applying default policy (%s) for "
2465"printer %s"
2466msgstr ""
2467"�����������s, ����� ���s)"
2468"� ����%s"
2469
2470#, python-format
2471msgid "User %s will not be charged for printing."
2472msgstr ""
2473
2474#, python-format
2475msgid "Print Quota exceeded for group %s on printer %s"
2476msgstr "����� ��� � ���%s � ���%s"
2477
2478msgid "Print Quota Exceeded"
2479msgstr "����� ���"
2480
2481#, python-format
2482msgid "Print Quota low for group %s on printer %s"
2483msgstr "������������%s � ���%s"
2484
2485msgid "Print Quota Low"
2486msgstr "��������#, python-format
2487msgid ""
2488"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
2489"double check /etc/pykota/pykota.conf : %s"
2490msgstr ""
2491"������� ������� ��������. "
2492"�����������etc/pykota/pykota.conf : %s"
2493
2494#, python-format
2495msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
2496msgstr "���� �%s(%s) � %s(��%s) � ������"
2497
2498#, python-format
2499msgid "Problem adding LDAP entry (%s, %s)"
2500msgstr "������������LDAP (%s, %s)"
2501
2502#, python-format
2503msgid "Problem deleting LDAP entry (%s)"
2504msgstr "������������LDAP (%s)"
2505
2506#, python-format
2507msgid "Problem modifying LDAP entry (%s, %s)"
2508msgstr "�������������LDAP (%s, %s)"
2509
2510#, python-format
2511msgid ""
2512"No pykotaAccountBalance object found for user %s. Did you create LDAP "
2513"entries manually ?"
2514msgstr ""
2515"� �������ykotaAccountBalance � ���s. ���� "
2516"LDAP ������� ;"
2517
2518msgid "Hidden because of privacy concerns"
2519msgstr ""
2520
2521#, python-format
2522msgid ""
2523"Unable to find an existing objectClass %s entry with %s=%s to attach "
2524"pykotaAccount objectClass"
2525msgstr ""
2526"�������objectClass %s ���� %s=%s � ���
2527"pykotaAccount objectClass"
2528
2529#, python-format
2530msgid "%s. A new entry will be created instead."
2531msgstr ""
2532
2533#, python-format
2534msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
2535msgstr ""
2536"����������������ykotaGroup "
2537"objectclass %s"
2538
2539msgid ""
2540"Your version of python-mysqldb is too old. Please install a newer release."
2541msgstr ""
2542
2543#, python-format
2544msgid "A problem occured while reading printer %s's internal page counter."
2545msgstr ""
2546"�������� ���������� ���� �"
2547"���%s."
2548
2549#, python-format
2550msgid "Retrieving printer %s's page counter from database instead."
2551msgstr ""
2552"������� ����%s � ���������."
2553
2554#, python-format
2555msgid ""
2556"Couldn't retrieve printer %s's internal page counter either before or after "
2557"printing."
2558msgstr ""
2559"��������� ���� ����%s ���"
2560"��� ���"
2561
2562#, python-format
2563msgid "Job's size forced to 1 page for printer %s."
2564msgstr "� ���������� ��� ����%s."
2565
2566#, python-format
2567msgid "No previous job in database for printer %s."
2568msgstr ""
2569"���������� �����������%s."
2570
2571#, python-format
2572msgid "Inconsistent values for printer %s's internal page counter."
2573msgstr "����� � �������� ����%s."
2574
2575#, python-format
2576msgid "Unknown printer address in HARDWARE(%s) for printer %s"
2577msgstr "����� ����HARDWARE(%s) � ����%s"
2578
2579#, python-format
2580msgid "Launching HARDWARE(%s)..."
2581msgstr "���ARDWARE(%s)..."
2582
2583#, python-format
2584msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
2585msgstr "SIGTERM ��� ����� ��%s (pid: %s)"
2586
2587#, python-format
2588msgid "Line [%s] skipped in accounter's output. Trying again..."
2589msgstr ""
2590"��� [%s] ������� �����. ���� ��.."
2591
2592#, python-format
2593msgid "Hardware accounter %s exit code is %s"
2594msgstr "�� �� ����� ��%s ��%s"
2595
2596#, python-format
2597msgid "Unable to query printer %s via HARDWARE(%s)"
2598msgstr "������ �����s ��DWARE(%s)"
2599
2600#, python-format
2601msgid ""
2602"Unable to precompute the job's size and ink coverage with the generic PDL "
2603"analyzer : %s"
2604msgstr ""
2605
2606#, python-format
2607msgid "Problem during connection to %s:%s : %s"
2608msgstr "�� ���� � %s:%s : %s"
2609
2610#, python-format
2611msgid "Problem while sending PJL query to %s:%s : %s"
2612msgstr "�� ���������L �%s:%s : %s"
2613
2614#, python-format
2615msgid "Problem while receiving PJL answer from %s:%s : %s"
2616msgstr ""
2617
2618#, python-format
2619msgid "Waiting for printer %s to be printing..."
2620msgstr ""
2621
2622#, python-format
2623msgid "Waiting for printer %s's idle status to stabilize..."
2624msgstr "���� ������������s..."
2625
2626#, python-format
2627msgid ""
2628"PJL querying stage interrupted. Using latest value seen for internal page "
2629"counter (%s) on printer %s."
2630msgstr ""
2631"��� PJL ���. �������������"
2632"���� (%s) ����%s."
2633
2634#, python-format
2635msgid ""
2636"SNMP querying stage interrupted. Using latest value seen for internal page "
2637"counter (%s) on printer %s."
2638msgstr ""
2639"��� SNMP ���. �������������"
2640"���� (%s) ����%s."
2641
2642#, python-format
2643msgid "Network error while doing SNMP queries on printer %s : %s"
2644msgstr "����� ���SNMP �� � ���%s : %s"
2645
2646#, python-format
2647msgid "SNMP message decoding error for printer %s : %s"
2648msgstr ""
2649
2650#, python-format
2651msgid "Problem encountered while doing SNMP queries on printer %s : %s"
2652msgstr "������ ����� SNMP � ���%s : %s"
2653
2654#, python-format
2655msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
2656msgstr "�� ����� ���������PDL : %s"
2657
2658#, python-format
2659msgid "Launching SOFTWARE(%s)..."
2660msgstr "���OFTWARE(%s)..."
2661
2662#, python-format
2663msgid "Unable to compute job size with accounter %s"
2664msgstr "�� ���� ��������� %s"
2665
2666#, python-format
2667msgid "Problem while waiting for software accounter pid %s to exit : %s"
2668msgstr ""
2669"������������ ����� ����%s : %s"
2670
2671#, python-format
2672msgid "Software accounter %s exit code is %s"
2673msgstr "�� �� ����� ������%s"
2674
2675msgid "Totals may be inaccurate if some users are members of several groups."
2676msgstr ""
2677"� �����������������������
2678"��."
2679
2680msgid "PyKota Data Dumper"
2681msgstr ""
2682
2683msgid "Dump"
2684msgstr ""
2685
2686msgid "Please click on the above button"
2687msgstr ""
2688
2689msgid "Data Type"
2690msgstr ""
2691
2692msgid "Output Format"
2693msgstr ""
2694
2695msgid "Filter"
2696msgstr ""
2697
2698msgid "Summarize"
2699msgstr ""
2700
2701msgid "only for payments or history"
2702msgstr ""
2703
2704msgid "PyKota Reports"
2705msgstr "���PyKota"
2706
2707msgid "Report"
2708msgstr "���
2709msgid "Printer"
2710msgstr "���
2711
2712msgid "User / Group names mask"
2713msgstr "�������� ���
2714
2715msgid "Groups report"
2716msgstr "�����msgid "Empty"
2717msgstr "���
2718msgid "Action"
2719msgstr "����
2720msgid "User"
2721msgstr "���
2722
2723msgid "Hostname"
2724msgstr "����
2725
2726msgid "JobId"
2727msgstr "���"
2728
2729msgid "Number of pages"
2730msgstr ""
2731
2732msgid "Cost"
2733msgstr ""
2734
2735msgid "Copies"
2736msgstr "���"
2737
2738msgid "Number of bytes"
2739msgstr ""
2740
2741msgid "Printer's internal counter"
2742msgstr ""
2743
2744msgid "Options"
2745msgstr "���"
2746
2747msgid "MD5Sum"
2748msgstr ""
2749
2750msgid "Billing code"
2751msgstr ""
2752
2753msgid "Precomputed number of pages"
2754msgstr ""
2755
2756msgid "Precomputed cost"
2757msgstr ""
2758
2759msgid "Pages details"
2760msgstr ""
2761
2762msgid "(not supported yet)"
2763msgstr ""
2764
2765msgid "Previous page"
2766msgstr "���� ��
2767
2768msgid "PyKota Quotes"
2769msgstr ""
2770
2771msgid "Quote"
2772msgstr ""
2773
2774msgid ""
2775"The exact cost of a print job can only be determined for a particular user. "
2776"Please retry while logged-in."
2777msgstr ""
2778
2779#~ msgid "Impossible to add printer %s"
2780#~ msgstr "����������%s"
2781
2782#~ msgid "Prototype object %s not found in Quota Storage."
2783#~ msgstr "� ������ %s ����������
2784#~ msgid "Prototype %s not found in Quota Storage for printer %s."
2785#~ msgstr "� ��%s ���������������%s."
2786
2787#~ msgid "Undefined hard limit set to soft limit (%s) on printer %s."
2788#~ msgstr ""
2789#~ "����� ��� ������%s) � ���%"
2790#~ "s."
2791
2792#~ msgid "Undefined soft limit set to hard limit (%s) on printer %s."
2793#~ msgstr ""
2794#~ "�������������� �%s) � ���%"
2795#~ "s."
2796
2797#~ msgid "Invalid group name %s"
2798#~ msgstr "� �������%s"
2799
2800#~ msgid "Invalid user name %s"
2801#~ msgstr "� �������s"
2802
2803#~ msgid "Quota not found for object %s on printer %s."
2804#~ msgstr "� ����� �����s � ���%s."
2805
2806#~ msgid "Group %s not found in the PyKota Storage."
2807#~ msgstr "���%s �����������Kota."
2808
2809#~ msgid "File number %s unregistered twice from polling object, ignored."
2810#~ msgstr ""
2811#~ "� �� ��� %s ��� � �������
2812#~ "��������
2813#~ msgid "SIGTERM was sent to real backend %s (pid: %s)"
2814#~ msgstr "SIGTERM ��� ���� �� %s (pid: %s)"
2815
2816#~ msgid "CUPS backend %s died abnormally."
2817#~ msgstr "��� CUPS %s �������
2818
2819#~ msgid "Software accounting already done in first pass. Ignoring."
2820#~ msgstr "���������� ���� �� ���."
2821
2822#~ msgid "Hardware accounting already done in first pass. Ignoring."
2823#~ msgstr "��������� ���� �� ���."
2824
2825#~ msgid "Invalid DeviceURI : %s"
2826#~ msgstr "� ���RI ���s"
2827
2828#~ msgid ""
2829#~ "\n"
2830#~ "Please wait while pkhint analyzes your printing system's configuration..."
2831#~ msgstr ""
2832#~ "\n"
2833#~ "������ � pkhint ������� �����#~ "���..."
2834
2835#~ msgid "Unknown device %s for printer %s"
2836#~ msgstr "����� %s � ����%s"
2837
2838#~ msgid ""
2839#~ "\n"
2840#~ "Put the following lines into your /etc/pykota/pykota.conf file :\n"
2841#~ msgstr ""
2842#~ "\n"
2843#~ "������� ������etc/pykota/pykota.conf :\n"
2844
2845#~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
2846#~ msgstr ""
2847#~ "# ����: �������� ��������
2848
2849#~ msgid ""
2850#~ "# that hardware accounting wouldn't work, this only means that PyKota"
2851#~ msgstr "# ������ ������ ��� PyKota"
2852
2853#~ msgid "# wasn't able to autodetect which hardware accounting method to use."
2854#~ msgstr "# ��� ������� �������~ msgid "JobSize"
2855#~ msgstr "���
2856
2857#~ msgid "JobPrice"
2858#~ msgstr "��
2859
2860#~ msgid "JobBytes"
2861#~ msgstr "���
2862
2863#~ msgid "PageCounter"
2864#~ msgstr "�����"
2865
2866#~ msgid "Printing system %s, args=%s"
2867#~ msgstr "������, ���%s"
2868
2869#~ msgid "Printer hostname undefined, set to 'localhost'"
2870#~ msgstr "��������� ��localhost'"
2871
2872#~ msgid "Printing system unknown, args=%s"
2873#~ msgstr "����� ���, ���%s"
2874
2875#~ msgid ""
2876#~ "autopykota v%s (c) %s %s\n"
2877#~ "\n"
2878#~ "A tool to automate user account creation and initial balance setting.\n"
2879#~ "\n"
2880#~ "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE "
2881#~ "QUOTA !\n"
2882#~ "\n"
2883#~ "command line usage :\n"
2884#~ "\n"
2885#~ "  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
2886#~ "  OF AN external policy IN pykota.conf\n"
2887#~ "  \n"
2888#~ "  autopykota { -i | --initbalance value } \n"
2889#~ "\n"
2890#~ "options :\n"
2891#~ "\n"
2892#~ "  -v | --version       Prints autopykota's version number then exits.\n"
2893#~ "  -h | --help          Prints this message then exits.\n"
2894#~ "  \n"
2895#~ "  -i | --initbalance b Sets the user's account initial balance value to "
2896#~ "b.\n"
2897#~ "                       If the user already exists, actual balance is "
2898#~ "left\n"
2899#~ "                       unmodified. If unset, the default value is 0.\n"
2900#~ "                       \n"
2901#~ "This program is free software; you can redistribute it and/or modify\n"
2902#~ "it under the terms of the GNU General Public License as published by\n"
2903#~ "the Free Software Foundation; either version 2 of the License, or\n"
2904#~ "(at your option) any later version.\n"
2905#~ "\n"
2906#~ "This program is distributed in the hope that it will be useful,\n"
2907#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
2908#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
2909#~ "GNU General Public License for more details.\n"
2910#~ "\n"
2911#~ "You should have received a copy of the GNU General Public License\n"
2912#~ "along with this program; if not, write to the Free Software\n"
2913#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
2914#~ "USA.\n"
2915#~ "\n"
2916#~ "Please e-mail bugs to: %s"
2917#~ msgstr ""
2918#~ "autopykota v%s (c) %s %s\n"
2919#~ "\n"
2920#~ "��� � ������������� ��� "
2921#~ "���~ "���\n"
2922#~ "\n"
2923#~ "�� � ���� ����� � ����������������� ��"
2924#~ "���n"
2925#~ "�����������!\n"
2926#~ "\n"
2927#~ "���� ���\n"
2928#~ "\n"
2929#~ "  � ���� �� ����� � ����������� ��� ���� "
2930#~ "��\n"
2931#~ "  � ����� ��� ���xternal policy) ��pykota.conf\n"
2932#~ "  \n"
2933#~ "  autopykota { -i | --initbalance � } \n"
2934#~ "\n"
2935#~ "���:\n"
2936#~ "\n"
2937#~ "  -v | --version       ��� �����autopykota � "
2938#~ "���.\n"
2939#~ "  -h | --help          ��� ����� ���.\n"
2940#~ "  \n"
2941#~ "  -i | --initbalance b ���� �������� �b.\n"
2942#~ "                       � ������ ��� ���n"
2943#~ "                       �� � � ����, ����\n"
2944#~ "                       \n"
2945#~ "This program is free software; you can redistribute it and/or modify\n"
2946#~ "it under the terms of the GNU General Public License as published by\n"
2947#~ "the Free Software Foundation; either version 2 of the License, or\n"
2948#~ "(at your option) any later version.\n"
2949#~ "\n"
2950#~ "This program is distributed in the hope that it will be useful,\n"
2951#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
2952#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
2953#~ "GNU General Public License for more details.\n"
2954#~ "\n"
2955#~ "You should have received a copy of the GNU General Public License\n"
2956#~ "along with this program; if not, write to the Free Software\n"
2957#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
2958#~ "USA.\n"
2959#~ "\n"
2960#~ "��� ��� �� e-mail � %s"
2961
2962#~ msgid ""
2963#~ "pkhint v%s (c) %s %s\n"
2964#~ "\n"
2965#~ "A tool to give hints on what accounting method is best for each printer.\n"
2966#~ "\n"
2967#~ "command line usage :\n"
2968#~ "\n"
2969#~ "  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
2970#~ "\n"
2971#~ "options :\n"
2972#~ "\n"
2973#~ "  -v | --version       Prints pkhint's version number then exits.\n"
2974#~ "  -h | --help          Prints this message then exits.\n"
2975#~ "  \n"
2976#~ "examples :                              \n"
2977#~ "\n"
2978#~ "  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
2979#~ "  \n"
2980#~ "  Will analyze your printing system to test which accounter\n"
2981#~ "  is the best for each of the defined printer which\n"
2982#~ "  name matches one of the parameters.\n"
2983#~ "  \n"
2984#~ "  If you don't pass any argument on the command line, all\n"
2985#~ "  printers will be analyzed.\n"
2986#~ "  \n"
2987#~ "This program is free software; you can redistribute it and/or modify\n"
2988#~ "it under the terms of the GNU General Public License as published by\n"
2989#~ "the Free Software Foundation; either version 2 of the License, or\n"
2990#~ "(at your option) any later version.\n"
2991#~ "\n"
2992#~ "This program is distributed in the hope that it will be useful,\n"
2993#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
2994#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
2995#~ "GNU General Public License for more details.\n"
2996#~ "\n"
2997#~ "You should have received a copy of the GNU General Public License\n"
2998#~ "along with this program; if not, write to the Free Software\n"
2999#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3000#~ "USA.\n"
3001#~ "\n"
3002#~ "Please e-mail bugs to: %s"
3003#~ msgstr ""
3004#~ "pkhint v%s (c) %s %s\n"
3005#~ "\n"
3006#~ "���� ��� � ����� �������\n"
3007#~ "\n"
3008#~ "���� ���\n"
3009#~ "\n"
3010#~ "  pkhint [��� [���1 ���2 ... ���N] <file.conf\n"
3011#~ "\n"
3012#~ "���:\n"
3013#~ "\n"
3014#~ "  -v | --version       ��� �����pkhint � ���.\n"
3015#~ "  -h | --help          ��� ����� ���.\n"
3016#~ "  \n"
3017#~ "����                              \n"
3018#~ "\n"
3019#~ "  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
3020#~ "  \n"
3021#~ "  ����� ��� �� ����� ��\n"
3022#~ "  ������ ��� � ���� � ���\n"
3023#~ "  ��� ����� ����� � ����.\n"
3024#~ "  \n"
3025#~ "  � �������������������
3026#~ "  ����.\n"
3027#~ "  \n"
3028#~ "This program is free software; you can redistribute it and/or modify\n"
3029#~ "it under the terms of the GNU General Public License as published by\n"
3030#~ "the Free Software Foundation; either version 2 of the License, or\n"
3031#~ "(at your option) any later version.\n"
3032#~ "\n"
3033#~ "This program is distributed in the hope that it will be useful,\n"
3034#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3035#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3036#~ "GNU General Public License for more details.\n"
3037#~ "\n"
3038#~ "You should have received a copy of the GNU General Public License\n"
3039#~ "along with this program; if not, write to the Free Software\n"
3040#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3041#~ "USA.\n"
3042#~ "\n"
3043#~ "��� ��� �� e-mail � %s"
3044
3045#~ msgid ""
3046#~ "pkprinters v%s (c) %s %s\n"
3047#~ "\n"
3048#~ "A Printers Manager for PyKota.\n"
3049#~ "\n"
3050#~ "command line usage :\n"
3051#~ "\n"
3052#~ "  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
3053#~ "\n"
3054#~ "options :\n"
3055#~ "\n"
3056#~ "  -v | --version       Prints pkprinters's version number then exits.\n"
3057#~ "  -h | --help          Prints this message then exits.\n"
3058#~ "  \n"
3059#~ "  -a | --add           Adds printers if they don't exist on the Quota \n"
3060#~ "                       Storage Server. If they exist, they are modified\n"
3061#~ "                       unless -s|--skipexisting is also used.\n"
3062#~ "                       \n"
3063#~ "  -d | --delete        Deletes printers from the quota storage.\n"
3064#~ "  \n"
3065#~ "  -D | --description d Adds a textual description to printers.\n"
3066#~ "                       \n"
3067#~ "  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
3068#~ "                       Job price is optional.\n"
3069#~ "                       If both are to be set, separate them with a "
3070#~ "comma.\n"
3071#~ "                       Floating point and negative values are allowed.\n"
3072#~ "  \n"
3073#~ "  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the "
3074#~ "printer \n"
3075#~ "                       groups pg1, pg2, etc... which must already exist.\n"
3076#~ "                       A printer group is just like a normal printer,\n"
3077#~ "                       only that it is usually unknown from the printing\n"
3078#~ "                       system. Create printer groups exactly the same\n"
3079#~ "                       way that you create printers, then add other \n"
3080#~ "                       printers to them with this option.\n"
3081#~ "                       Accounting is done on a printer and on all\n"
3082#~ "                       the printer groups it belongs to, quota checking\n"
3083#~ "                       is done on a printer and on all the printer "
3084#~ "groups\n"
3085#~ "                       it belongs to.\n"
3086#~ "                       If the --remove option below is not used, the \n"
3087#~ "                       default action is to add printers to the "
3088#~ "specified\n"
3089#~ "                       printer groups.\n"
3090#~ "                       \n"
3091#~ "  -l | --list          List informations about the printer(s) and the\n"
3092#~ "                       printers groups it is a member of.\n"
3093#~ "                       \n"
3094#~ "  -r | --remove        In combination with the --groups option "
3095#~ "above,                       \n"
3096#~ "                       remove printers from the specified printers "
3097#~ "groups.\n"
3098#~ "                       \n"
3099#~ "  -s | --skipexisting  In combination with the --add option above, tells\n"
3100#~ "                       pkprinters to not modify existing printers.\n"
3101#~ "  \n"
3102#~ "  printer1 through printerN can contain wildcards if the --add option \n"
3103#~ "  is not set.\n"
3104#~ "  \n"
3105#~ "examples :                              \n"
3106#~ "\n"
3107#~ "  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
3108#~ "hp8000\n"
3109#~ "  \n"
3110#~ "  Will create three printers named hp2100, hp2200 and hp8000.\n"
3111#~ "  Their price per page will be set at 0.05 unit, and their price\n"
3112#~ "  per job will be set at 0.1 unit. Units are in your own currency,\n"
3113#~ "  or whatever you want them to mean.\n"
3114#~ "  All of their descriptions will be set to the string \"HP Printer\".\n"
3115#~ "  If any of these printers already exists, it will also be modified \n"
3116#~ "  unless the -s|--skipexisting command line option is also used.\n"
3117#~ "            \n"
3118#~ "  $ pkprinters --delete \"*\"\n"
3119#~ "  \n"
3120#~ "  This will completely delete all printers and associated quota "
3121#~ "information,\n"
3122#~ "  as well as their job history. USE WITH CARE !\n"
3123#~ "  \n"
3124#~ "  $ pkprinters --groups Laser,HP \"hp*\"\n"
3125#~ "  \n"
3126#~ "  This will put all printers which name matches \"hp*\" into printers "
3127#~ "groups \n"
3128#~ "  Laser and HP, which MUST already exist.\n"
3129#~ "  \n"
3130#~ "  $ pkprinters --groups LexMark --remove hp2200\n"
3131#~ "  \n"
3132#~ "  This will remove the hp2200 printer from the LexMark printer group.\n"
3133#~ "  \n"
3134#~ "This program is free software; you can redistribute it and/or modify\n"
3135#~ "it under the terms of the GNU General Public License as published by\n"
3136#~ "the Free Software Foundation; either version 2 of the License, or\n"
3137#~ "(at your option) any later version.\n"
3138#~ "\n"
3139#~ "This program is distributed in the hope that it will be useful,\n"
3140#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3141#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3142#~ "GNU General Public License for more details.\n"
3143#~ "\n"
3144#~ "You should have received a copy of the GNU General Public License\n"
3145#~ "along with this program; if not, write to the Free Software\n"
3146#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3147#~ "USA.\n"
3148#~ "\n"
3149#~ "Please e-mail bugs to: %s"
3150#~ msgstr ""
3151#~ "pkprinters v%s (c) %s %s\n"
3152#~ "\n"
3153#~ "���� ������yKota.\n"
3154#~ "\n"
3155#~ "���� ���\n"
3156#~ "\n"
3157#~ "  pkprinters [��� ���1 ���2 ... ���N\n"
3158#~ "\n"
3159#~ "���:\n"
3160#~ "\n"
3161#~ "  -v | --version       ��� �����pkprinters � "
3162#~ "���.\n"
3163#~ "  -h | --help          ��� ����� ���.\n"
3164#~ "  \n"
3165#~ "  -a | --add           ������� �� �� ���"
3166#~ "                       ���. � ��, �������#~ "                       ����� � ����-s|--"
3167#~ "skipexisting.\n"
3168#~ "                       \n"
3169#~ "  -d | --delete        ������� � ��������n"
3170#~ "  \n"
3171#~ "  -D | --description   ����� ����������"
3172#~ "                       \n"
3173#~ "  -c | --charge p[,j]  ���� ��� ��� � "
3174#~ "���n"
3175#~ "                       �� ��������.\n"
3176#~ "                       � ������, ��������"
3177#~ "                       ��\n"
3178#~ "                       �������� ����� ��"
3179#~ "  \n"
3180#~ "  -g | --groups pg1[,pg2...] ���������� ����\n"
3181#~ "                       � �� ����g1, pg2, �.� ���
3182#~ "                       ������. ���������n"
3183#~ "                       ������ ���, ���� �\n"
3184#~ "                       ������� ���. ����n"
3185#~ "                       �� �����������"
3186#~ "����"
3187#~ "                       ���, ���������� "
3188#~ "��\n"
3189#~ "                       ����������������n"
3190#~ "                       ������������ ��\n"
3191#~ "                       ��� ����������\n"
3192#~ "                       � � ���� �������n"
3193#~ "                       --remove, ��������� ����"
3194#~ "                       � ���� �� ����"
3195#~ "                       \n"
3196#~ "  -l | --list          ������ �� ��� ���"
3197#~ "�\n"
3198#~ "                       � ��� ����������\n"
3199#~ "                       \n"
3200#~ "  -r | --remove        � �������-groups ��,\n"
3201#~ "                       ������ � ���� ��\n"
3202#~ "                       ����n"
3203#~ "                       \n"
3204#~ "  -s | --skipexisting  � �������-add ��, �\n"
3205#~ "                       ����pkprinters ��������n"
3206#~ "                       ���.\n"
3207#~ "  \n"
3208#~ "  � ������1 � ���N ������ ���n"
3209#~ "  �� �� ����--add.\n"
3210#~ "  \n"
3211#~ "���:                              \n"
3212#~ "\n"
3213#~ "  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
3214#~ "hp8000\n"
3215#~ "  \n"
3216#~ "  ������������p2100, hp2200 � hp8000.\n"
3217#~ "  �� � � ������.05 ��� � �� �\n"
3218#~ "  � ����0.1 ��� ��� ��������n"
3219#~ "  ���� �� ��� � ���� ����\n"
3220#~ "  �� ����� ��������\"HP Printer\".\n"
3221#~ "  � ���� � � ��� ���������n"
3222#~ "  ������ � ����-s|--skipexisting.\n"
3223#~ "            \n"
3224#~ "  $ pkprinters --delete \"*\"\n"
3225#~ "  \n"
3226#~ "  �������� � ��� � ����� �\n"
3227#~ "  ������ ������ �.\n"
3228#~ "  ������� � ����!\n"
3229#~ "  \n"
3230#~ "  $ pkprinters --groups Laser,HP \"hp*\"\n"
3231#~ "  \n"
3232#~ "  ��������� ������� �\"hp*\" \n"
3233#~ "  � �� ����aser � HP, ���� ����.\n"
3234#~ "  \n"
3235#~ "  $ pkprinters --groups LexMark --remove hp2200\n"
3236#~ "  \n"
3237#~ "  ��������hp2200 � �������exMark.\n"
3238#~ "  \n"
3239#~ "This program is free software; you can redistribute it and/or modify\n"
3240#~ "it under the terms of the GNU General Public License as published by\n"
3241#~ "the Free Software Foundation; either version 2 of the License, or\n"
3242#~ "(at your option) any later version.\n"
3243#~ "\n"
3244#~ "This program is distributed in the hope that it will be useful,\n"
3245#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3246#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3247#~ "GNU General Public License for more details.\n"
3248#~ "\n"
3249#~ "You should have received a copy of the GNU General Public License\n"
3250#~ "along with this program; if not, write to the Free Software\n"
3251#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3252#~ "USA.\n"
3253#~ "\n"
3254#~ "��� ��� �� e-mail � %s"
3255
3256#~ msgid ""
3257#~ "pykosd v%s (c) %s %s\n"
3258#~ "\n"
3259#~ "An OSD quota monitor for PyKota.\n"
3260#~ "\n"
3261#~ "command line usage :\n"
3262#~ "\n"
3263#~ "  pykosd [options]\n"
3264#~ "\n"
3265#~ "options :\n"
3266#~ "\n"
3267#~ "  -v | --version       Prints pykosd's version number then exits.\n"
3268#~ "  -h | --help          Prints this message then exits.\n"
3269#~ "  \n"
3270#~ "  -c | --color #rrggbb Sets the color to use for display as an "
3271#~ "hexadecimal\n"
3272#~ "                       triplet, for example #FF0000 is 100%% red.\n"
3273#~ "                       Defaults to 100%% green (#00FF00).\n"
3274#~ "                       \n"
3275#~ "  -d | --duration d    Sets the duration of the display in seconds. \n"
3276#~ "                       Defaults to 3 seconds.\n"
3277#~ "                       \n"
3278#~ "  -f | --font f        Sets the font to use for "
3279#~ "display.                      \n"
3280#~ "                       Defaults to the Python OSD library's default.\n"
3281#~ "  \n"
3282#~ "  -l | --loop n        Sets the number of times the info will be "
3283#~ "displayed.\n"
3284#~ "                       Defaults to 0, which means loop forever.\n"
3285#~ "                       \n"
3286#~ "  -s | --sleep s       Sets the sleeping duration between two displays \n"
3287#~ "                       in seconds. Defaults to 180 seconds (3 minutes).\n"
3288#~ "                       \n"
3289#~ "  \n"
3290#~ "examples :                              \n"
3291#~ "\n"
3292#~ "  $ pykosd -s 60 --loop 5\n"
3293#~ "  \n"
3294#~ "  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
3295#~ "  and will last for 3 seconds (the default) each time. After five\n"
3296#~ "  iterations, the program will exit.\n"
3297#~ "  \n"
3298#~ "This program is free software; you can redistribute it and/or modify\n"
3299#~ "it under the terms of the GNU General Public License as published by\n"
3300#~ "the Free Software Foundation; either version 2 of the License, or\n"
3301#~ "(at your option) any later version.\n"
3302#~ "\n"
3303#~ "This program is distributed in the hope that it will be useful,\n"
3304#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3305#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3306#~ "GNU General Public License for more details.\n"
3307#~ "\n"
3308#~ "You should have received a copy of the GNU General Public License\n"
3309#~ "along with this program; if not, write to the Free Software\n"
3310#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3311#~ "USA.\n"
3312#~ "\n"
3313#~ "Please e-mail bugs to: %s"
3314#~ msgstr ""
3315#~ "pykosd v%s (c) %s %s\n"
3316#~ "\n"
3317#~ "������PyKota ��������OSD).\n"
3318#~ "\n"
3319#~ "���� ���\n"
3320#~ "\n"
3321#~ "  pykosd [���\n"
3322#~ "\n"
3323#~ "���:\n"
3324#~ "\n"
3325#~ "  -v | --version       ��� �����pykosd � ���.\n"
3326#~ "  -h | --help          ��� ����� ���.\n"
3327#~ "  \n"
3328#~ "  -c | --color #rrggbb ����� ���������n"
3329#~ "                       ���� ���� ��� #FF0000 "
3330#~ "��n"
3331#~ "                       100%% ���n"
3332#~ "                       ����������00%% �� "
3333#~ "(#00FF00).\n"
3334#~ "                       \n"
3335#~ "  -d | --duration d    ������������
3336#~ "����\n"
3337#~ "                       ����� ����� ����n"
3338#~ "                       \n"
3339#~ "  -f | --font f        ��������� �������"
3340#~ "                       �������� �����OSD �"
3341#~ "Python.\n"
3342#~ "  \n"
3343#~ "  -l | --loop n        ������ �������� �
3344#~ "���\n"
3345#~ "                       �������, �������"
3346#~ "��"
3347#~ "                       \n"
3348#~ "  -s | --sleep s       ����� ��� �� � ����\n"
3349#~ "                       ����������80 ����3 "
3350#~ "��\n"
3351#~ "                       \n"
3352#~ "  \n"
3353#~ "����                              \n"
3354#~ "\n"
3355#~ "  $ pykosd -s 60 --loop 5\n"
3356#~ "  \n"
3357#~ "  ����ykosd. ������������0 ����n"
3358#~ "  � ��� � 3 ������� ���. ���"
3359#~ "  �����, ��������\n"
3360#~ "  \n"
3361#~ "This program is free software; you can redistribute it and/or modify\n"
3362#~ "it under the terms of the GNU General Public License as published by\n"
3363#~ "the Free Software Foundation; either version 2 of the License, or\n"
3364#~ "(at your option) any later version.\n"
3365#~ "\n"
3366#~ "This program is distributed in the hope that it will be useful,\n"
3367#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3368#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3369#~ "GNU General Public License for more details.\n"
3370#~ "\n"
3371#~ "You should have received a copy of the GNU General Public License\n"
3372#~ "along with this program; if not, write to the Free Software\n"
3373#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3374#~ "USA.\n"
3375#~ "\n"
3376#~ "��� ��� �� e-mail � %s"
3377
3378#~ msgid ""
3379#~ "pykotme v%s (c) %s %s\n"
3380#~ "\n"
3381#~ "Gives print quotes to users.\n"
3382#~ "\n"
3383#~ "command line usage :\n"
3384#~ "\n"
3385#~ "  pykotme  [options]  [files]\n"
3386#~ "\n"
3387#~ "options :\n"
3388#~ "\n"
3389#~ "  -v | --version       Prints pykotme's version number then exits.\n"
3390#~ "  -h | --help          Prints this message then exits.\n"
3391#~ "  \n"
3392#~ "  -P | --printer p     Gives a quote for this printer only. Actually p "
3393#~ "can\n"
3394#~ "                       use wildcards characters to select only\n"
3395#~ "                       some printers. The default value is *, meaning\n"
3396#~ "                       all printers.\n"
3397#~ "                       You can specify several names or wildcards, \n"
3398#~ "                       by separating them with commas.\n"
3399#~ "  \n"
3400#~ "examples :                              \n"
3401#~ "\n"
3402#~ "  $ pykotme --printer apple file1.ps file2.ps\n"
3403#~ "  \n"
3404#~ "  This will give a print quote to the current user. The quote will show\n"
3405#~ "  the price and size of a job consisting in file1.ps and file2.ps \n"
3406#~ "  which would be sent to the apple printer.\n"
3407#~ "  \n"
3408#~ "  $ pykotme --printer apple,hplaser <file1.ps\n"
3409#~ "  \n"
3410#~ "  This will give a print quote to the current user. The quote will show\n"
3411#~ "  the price and size of a job consisting in file1.ps as read from\n"
3412#~ "  standard input, which would be sent to the apple or hplaser\n"
3413#~ "  printer.\n"
3414#~ "\n"
3415#~ "  $ pykotme \n"
3416#~ "  \n"
3417#~ "  This will give a quote for a job consisting of what is on standard \n"
3418#~ "  input. The quote will list the job size, and the price the job\n"
3419#~ "  would cost on each printer.\n"
3420#~ "\n"
3421#~ "This program is free software; you can redistribute it and/or modify\n"
3422#~ "it under the terms of the GNU General Public License as published by\n"
3423#~ "the Free Software Foundation; either version 2 of the License, or\n"
3424#~ "(at your option) any later version.\n"
3425#~ "\n"
3426#~ "This program is distributed in the hope that it will be useful,\n"
3427#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3428#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3429#~ "GNU General Public License for more details.\n"
3430#~ "\n"
3431#~ "You should have received a copy of the GNU General Public License\n"
3432#~ "along with this program; if not, write to the Free Software\n"
3433#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3434#~ "USA.\n"
3435#~ "\n"
3436#~ "Please e-mail bugs to: %s"
3437#~ msgstr ""
3438#~ "pykotme v%s (c) %s %s\n"
3439#~ "\n"
3440#~ "��� ��� � ���� ����\n"
3441#~ "\n"
3442#~ "���� ���\n"
3443#~ "\n"
3444#~ "  pykotme  [���  [��]\n"
3445#~ "\n"
3446#~ "���:\n"
3447#~ "\n"
3448#~ "  -v | --version       ��� �����pykotme � ���.\n"
3449#~ "  -h | --help          ��� ����� ���.\n"
3450#~ "  \n"
3451#~ "  -P | --printer p     ��� ��� ��������\n"
3452#~ "                       �p ���������� ����\n"
3453#~ "                       �������� �����*,\n"
3454#~ "                       ���������"
3455#~ "                       ������������� ��� \n"
3456#~ "                       ������.\n"
3457#~ "  \n"
3458#~ "����                              \n"
3459#~ "\n"
3460#~ "  $ pykotme --printer apple file1.ps file2.ps\n"
3461#~ "  \n"
3462#~ "  ��� ����� � ����������n"
3463#~ "  ��� �� � ��������������\n"
3464#~ "  ���ile1.ps � file2.ps ����������n"
3465#~ "  apple.\n"
3466#~ "  \n"
3467#~ "  $ pykotme --printer apple,hplaser <file1.ps\n"
3468#~ "  \n"
3469#~ "  ��� ����� � ����������n"
3470#~ "  ��� �� � ��������������\n"
3471#~ "  ���ile1.ps ���������, ��n"
3472#~ "  ���� ���apple �����hplaser.\n"
3473#~ "\n"
3474#~ "  $ pykotme \n"
3475#~ "  \n"
3476#~ "  ��� ����� � � ���������\n"
3477#~ "  ���� ��. �������������
3478#~ "  ���� �� ���� �����.\n"
3479#~ "\n"
3480#~ "This program is free software; you can redistribute it and/or modify\n"
3481#~ "it under the terms of the GNU General Public License as published by\n"
3482#~ "the Free Software Foundation; either version 2 of the License, or\n"
3483#~ "(at your option) any later version.\n"
3484#~ "\n"
3485#~ "This program is distributed in the hope that it will be useful,\n"
3486#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3487#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3488#~ "GNU General Public License for more details.\n"
3489#~ "\n"
3490#~ "You should have received a copy of the GNU General Public License\n"
3491#~ "along with this program; if not, write to the Free Software\n"
3492#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3493#~ "USA.\n"
3494#~ "\n"
3495#~ "��� ��� �� e-mail � %s"
3496
3497#~ msgid ""
3498#~ "repykota v%s (c) %s %s\n"
3499#~ "\n"
3500#~ "Generates print quota reports.\n"
3501#~ "\n"
3502#~ "command line usage :\n"
3503#~ "\n"
3504#~ "  repykota [options] \n"
3505#~ "\n"
3506#~ "options :\n"
3507#~ "\n"
3508#~ "  -v | --version       Prints repykota's version number then exits.\n"
3509#~ "  -h | --help          Prints this message then exits.\n"
3510#~ "  \n"
3511#~ "  -u | --users         Generates a report on users quota, this is \n"
3512#~ "                       the default.\n"
3513#~ "  \n"
3514#~ "  -g | --groups        Generates a report on group quota instead of "
3515#~ "users.\n"
3516#~ "  \n"
3517#~ "  -P | --printer p     Report quotas on this printer only. Actually p "
3518#~ "can\n"
3519#~ "                       use wildcards characters to select only\n"
3520#~ "                       some printers. The default value is *, meaning\n"
3521#~ "                       all printers.\n"
3522#~ "                       You can specify several names or wildcards, \n"
3523#~ "                       by separating them with commas.\n"
3524#~ "  \n"
3525#~ "examples :                              \n"
3526#~ "\n"
3527#~ "  $ repykota --printer lp\n"
3528#~ "  \n"
3529#~ "  This will print the quota status for all users who use the lp printer.\n"
3530#~ "\n"
3531#~ "  $ repykota \n"
3532#~ "  \n"
3533#~ "  This will print the quota status for all users on all printers.\n"
3534#~ "  \n"
3535#~ "  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
3536#~ "  \n"
3537#~ "  This will print the quota status for user jerome and all users\n"
3538#~ "  whose name begins with \"jo\" on all printers which name begins\n"
3539#~ "  with \"laser\" or ends with \"pson\".\n"
3540#~ "  \n"
3541#~ "  If launched by an user who is not a PyKota administrator, additionnal\n"
3542#~ "  arguments representing users or groups names are ignored, and only the\n"
3543#~ "  current user/group is reported.\n"
3544#~ "\n"
3545#~ "This program is free software; you can redistribute it and/or modify\n"
3546#~ "it under the terms of the GNU General Public License as published by\n"
3547#~ "the Free Software Foundation; either version 2 of the License, or\n"
3548#~ "(at your option) any later version.\n"
3549#~ "\n"
3550#~ "This program is distributed in the hope that it will be useful,\n"
3551#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3552#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3553#~ "GNU General Public License for more details.\n"
3554#~ "\n"
3555#~ "You should have received a copy of the GNU General Public License\n"
3556#~ "along with this program; if not, write to the Free Software\n"
3557#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3558#~ "USA.\n"
3559#~ "\n"
3560#~ "Please e-mail bugs to: %s"
3561#~ msgstr ""
3562#~ "repykota v%s (c) %s %s\n"
3563#~ "\n"
3564#~ "�����������"
3565#~ "\n"
3566#~ "���� ���\n"
3567#~ "\n"
3568#~ "  repykota [��� \n"
3569#~ "\n"
3570#~ "���:\n"
3571#~ "\n"
3572#~ "  -v | --version       ��� �����repykota � ���.\n"
3573#~ "  -h | --help          ��� ����� ���.\n"
3574#~ "  \n"
3575#~ "  -u | --users         ������ ������ �n"
3576#~ "                       �� ��������\n"
3577#~ "  \n"
3578#~ "  -g | --groups        ������ ������ ��\n"
3579#~ "                       ������\n"
3580#~ "  \n"
3581#~ "  -P | --printer p     ����� ����� �n"
3582#~ "                       ���p ���������� �n"
3583#~ "                       ��� ��������"
3584#~ "                       ������*, �� �����"
3585#~ "                       ������������ ���\n"
3586#~ "                       �������.\n"
3587#~ "  \n"
3588#~ "����                              \n"
3589#~ "\n"
3590#~ "  $ repykota --printer lp\n"
3591#~ "  \n"
3592#~ "  ��� ���� ���� � �� ���n"
3593#~ "  ���� ���lp.\n"
3594#~ "\n"
3595#~ "  $ repykota \n"
3596#~ "  \n"
3597#~ "  ��� ���� ���� � �� ���"
3598#~ "  �� ���.\n"
3599#~ "  \n"
3600#~ "  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
3601#~ "  \n"
3602#~ "  ��� ���� ���� � ���erome �\n"
3603#~ "  �� ������� ���� \"jo\" ���
3604#~ "  � ��� ����� ���� \"laser\" ����n"
3605#~ "  �"pson\".\n"
3606#~ "  \n"
3607#~ "  � ��� � ���� ������ �PyKota, "
3608#~ "���"
3609#~ "  ���� ������������ � ��\n"
3610#~ "  �������������\n"
3611#~ "\n"
3612#~ "This program is free software; you can redistribute it and/or modify\n"
3613#~ "it under the terms of the GNU General Public License as published by\n"
3614#~ "the Free Software Foundation; either version 2 of the License, or\n"
3615#~ "(at your option) any later version.\n"
3616#~ "\n"
3617#~ "This program is distributed in the hope that it will be useful,\n"
3618#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3619#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3620#~ "GNU General Public License for more details.\n"
3621#~ "\n"
3622#~ "You should have received a copy of the GNU General Public License\n"
3623#~ "along with this program; if not, write to the Free Software\n"
3624#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3625#~ "USA.\n"
3626#~ "\n"
3627#~ "��� ��� �� e-mail � %s"
3628
3629#~ msgid ""
3630#~ "warnpykota v%s (c) %s %s\n"
3631#~ "\n"
3632#~ "Sends mail to users over print quota.\n"
3633#~ "\n"
3634#~ "command line usage :\n"
3635#~ "\n"
3636#~ "  warnpykota  [options]  [names]\n"
3637#~ "\n"
3638#~ "options :\n"
3639#~ "\n"
3640#~ "  -v | --version       Prints warnpykota's version number then exits.\n"
3641#~ "  -h | --help          Prints this message then exits.\n"
3642#~ "  \n"
3643#~ "  -u | --users         Warns users over their print quota, this is the \n"
3644#~ "                       default.\n"
3645#~ "  \n"
3646#~ "  -g | --groups        Warns users whose groups quota are over limit.\n"
3647#~ "  \n"
3648#~ "  -P | --printer p     Verify quotas on this printer only. Actually p "
3649#~ "can\n"
3650#~ "                       use wildcards characters to select only\n"
3651#~ "                       some printers. The default value is *, meaning\n"
3652#~ "                       all printers.\n"
3653#~ "                       You can specify several names or wildcards, \n"
3654#~ "                       by separating them with commas.\n"
3655#~ "  \n"
3656#~ "examples :                              \n"
3657#~ "\n"
3658#~ "  $ warnpykota --printer lp\n"
3659#~ "  \n"
3660#~ "  This will warn all users of the lp printer who have exceeded their\n"
3661#~ "  print quota.\n"
3662#~ "\n"
3663#~ "  $ warnpykota \n"
3664#~ "  \n"
3665#~ "  This will warn all users  who have exceeded their print quota on\n"
3666#~ "  any printer.\n"
3667#~ "\n"
3668#~ "  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
3669#~ "  \n"
3670#~ "  This will warn all users of groups which names begins with \"dev\" and\n"
3671#~ "  who have exceeded their print quota on any printer which name begins \n"
3672#~ "  with \"laserjet\"\n"
3673#~ "  \n"
3674#~ "  If launched by an user who is not a PyKota administrator, additionnal\n"
3675#~ "  arguments representing users or groups names are ignored, and only the\n"
3676#~ "  current user/group is reported.\n"
3677#~ "\n"
3678#~ "This program is free software; you can redistribute it and/or modify\n"
3679#~ "it under the terms of the GNU General Public License as published by\n"
3680#~ "the Free Software Foundation; either version 2 of the License, or\n"
3681#~ "(at your option) any later version.\n"
3682#~ "\n"
3683#~ "This program is distributed in the hope that it will be useful,\n"
3684#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3685#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3686#~ "GNU General Public License for more details.\n"
3687#~ "\n"
3688#~ "You should have received a copy of the GNU General Public License\n"
3689#~ "along with this program; if not, write to the Free Software\n"
3690#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3691#~ "USA.\n"
3692#~ "\n"
3693#~ "Please e-mail bugs to: %s"
3694#~ msgstr ""
3695#~ "warnpykota v%s (c) %s %s\n"
3696#~ "\n"
3697#~ "��� email ������ �� �����.\n"
3698#~ "\n"
3699#~ "���� ���\n"
3700#~ "\n"
3701#~ "  warnpykota  [���  [���n"
3702#~ "\n"
3703#~ "���:\n"
3704#~ "\n"
3705#~ "  -v | --version       ��� �����warnpykota � "
3706#~ "���.\n"
3707#~ "  -h | --help          ��� ����� ���.\n"
3708#~ "  \n"
3709#~ "  -u | --users         ������ ���� ���n"
3710#~ "                       ��� �. ��������\n"
3711#~ "  \n"
3712#~ "  -g | --groups        ������ ����� �� �
3713#~ "���\n"
3714#~ "  \n"
3715#~ "  -P | --printer p     �������������� �"
3716#~ "���n"
3717#~ "                       p ����������� �"
3718#~ "��� ��"
3719#~ "                       ������ ����� ��*, "
3720#~ "�n"
3721#~ "                       ��������"
3722#~ "                       ������������ ��� �"
3723#~ "�"
3724#~ "                       ���������"
3725#~ "  \n"
3726#~ "����                              \n"
3727#~ "\n"
3728#~ "  $ warnpykota --printer lp\n"
3729#~ "  \n"
3730#~ "  ������� ������lp ��� �� �"
3731#~ "  ������.\n"
3732#~ "\n"
3733#~ "  $ warnpykota \n"
3734#~ "  \n"
3735#~ "  ������� ����� �� �����\n"
3736#~ "  � ���� ���\n"
3737#~ "\n"
3738#~ "  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
3739#~ "  \n"
3740#~ "  ������� ����� �������� �\n"
3741#~ "  \"dev\" ����� �� ����� � �
3742#~ "����\n"
3743#~ "  ������������  \"laserjet\"\n"
3744#~ "  \n"
3745#~ "  � ��� � ���� ������ �PyKota, �n"
3746#~ "  �������������� ���� �\n"
3747#~ "  ����������� ��������n"
3748#~ "\n"
3749#~ "This program is free software; you can redistribute it and/or modify\n"
3750#~ "it under the terms of the GNU General Public License as published by\n"
3751#~ "the Free Software Foundation; either version 2 of the License, or\n"
3752#~ "(at your option) any later version.\n"
3753#~ "\n"
3754#~ "This program is distributed in the hope that it will be useful,\n"
3755#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3756#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3757#~ "GNU General Public License for more details.\n"
3758#~ "\n"
3759#~ "You should have received a copy of the GNU General Public License\n"
3760#~ "along with this program; if not, write to the Free Software\n"
3761#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3762#~ "USA.\n"
3763#~ "\n"
3764#~ "��� ��� �� e-mail � %s"
3765
3766#~ msgid ""
3767#~ "Internal SNMP accounting asked, but Python-SNMP is not available. Please "
3768#~ "download it from http://pysnmp.sourceforge.net"
3769#~ msgstr ""
3770#~ "������� �SNMP, �������ython-SNMP � ��"
3771#~ "���. �������� http://pysnmp.sourceforge.net"
3772
3773#~ msgid ""
3774#~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
3775#~ "Libres\n"
3776#~ "\n"
3777#~ "Dumps PyKota database's content.\n"
3778#~ "\n"
3779#~ "command line usage :\n"
3780#~ "\n"
3781#~ "  dumpykota [options] \n"
3782#~ "\n"
3783#~ "options :\n"
3784#~ "\n"
3785#~ "  -v | --version       Prints dumpykota's version number then exits.\n"
3786#~ "  -h | --help          Prints this message then exits.\n"
3787#~ "  \n"
3788#~ "  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
3789#~ "                       \n"
3790#~ "                         - history : dumps the jobs history.\n"
3791#~ "                         - users : dumps users.\n"
3792#~ "                         - groups : dumps user groups.\n"
3793#~ "                         - printers : dump printers.\n"
3794#~ "                         - upquotas : dump user quotas.\n"
3795#~ "                         - gpquotas : dump user groups quotas.\n"
3796#~ "                         - payments : dumps user payments.\n"
3797#~ "                         - pmembers : dumps printer groups members.\n"
3798#~ "                         - umembers : dumps user groups members.\n"
3799#~ "                         \n"
3800#~ "                       NB : the -d | --data command line option   \n"
3801#~ "                       is MANDATORY.\n"
3802#~ "  \n"
3803#~ "  -f | --format fmt    Dumps datas in the 'fmt' format. When not "
3804#~ "specified,\n"
3805#~ "                       the format is to dump datas in the csv format "
3806#~ "(comma\n"
3807#~ "                       separated values). All data dumped is between "
3808#~ "double\n"
3809#~ "                       quotes. Allowed formats are :\n"
3810#~ "                       \n"
3811#~ "                         - csv : separate datas with commas\n"
3812#~ "                         - ssv : separate datas with semicolons\n"
3813#~ "                         - tsv : separate datas with tabs\n"
3814#~ "                         - xml : dump data as XML\n"
3815#~ "                         \n"
3816#~ "  -o | --output fname  All datas will be dumped to the file instead of\n"
3817#~ "                       to the standard output. The special '-' filename\n"
3818#~ "                       is the default value and means stdout.\n"
3819#~ "                       WARNING : existing files are truncated !\n"
3820#~ "  \n"
3821#~ "Examples :\n"
3822#~ "\n"
3823#~ "  $ dumpykota --data history --format csv >myfile.csv\n"
3824#~ "  \n"
3825#~ "  This dumps the history in a comma separated values file, for possible\n"
3826#~ "  use in a spreadsheet.\n"
3827#~ "  \n"
3828#~ "  $ dumpykota --data users --format xml -o users.xml\n"
3829#~ "  \n"
3830#~ "  Dumps all users datas to the users.xml file.\n"
3831#~ "  \n"
3832#~ "This program is free software; you can redistribute it and/or modify\n"
3833#~ "it under the terms of the GNU General Public License as published by\n"
3834#~ "the Free Software Foundation; either version 2 of the License, or\n"
3835#~ "(at your option) any later version.\n"
3836#~ "\n"
3837#~ "This program is distributed in the hope that it will be useful,\n"
3838#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3839#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3840#~ "GNU General Public License for more details.\n"
3841#~ "\n"
3842#~ "You should have received a copy of the GNU General Public License\n"
3843#~ "along with this program; if not, write to the Free Software\n"
3844#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3845#~ "USA.\n"
3846#~ "\n"
3847#~ "Please e-mail bugs to: %s"
3848#~ msgstr ""
3849#~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
3850#~ "Libres\n"
3851#~ "\n"
3852#~ "��� ����������� PyKota.\n"
3853#~ "\n"
3854#~ "���� ���\n"
3855#~ "\n"
3856#~ "  dumpykota [��� \n"
3857#~ "\n"
3858#~ "���:\n"
3859#~ "\n"
3860#~ "  -v | --version       ��� �����dumpykota� ���.\n"
3861#~ "  -h | --help          ��� ����� ���.\n"
3862#~ "  \n"
3863#~ "  -d | --data type     ��� ���'���������\n"
3864#~ "                       \n"
3865#~ "                         - history : ��� ������.\n"
3866#~ "                         - users : ��� ��\n"
3867#~ "                         - groups : ��� �� ��\n"
3868#~ "                         - printers : ��� ���.\n"
3869#~ "                         - upquotas : ��� ����n"
3870#~ "                         - gpquotas : ��� ������n"
3871#~ "                         - payments : ��� ��� ��\n"
3872#~ "                         - pmembers : ��� ������\n"
3873#~ "                         - umembers : ��� �������n"
3874#~ "                         \n"
3875#~ "                       ��� ����-d | --data ��"
3876#~ "������n"
3877#~ "  \n"
3878#~ "  -f | --format fmt    ��� ���������� ��"
3879#~ "�\n"
3880#~ "                       ��� ������sv (��#~ "����n"
3881#~ "                       ���� �����������n"
3882#~ "                       ������������\n"
3883#~ "                       ���������� ��:\n"
3884#~ "                       \n"
3885#~ "                         - csv : ������ ���"
3886#~ "                         - ssv : ������ ���"
3887#~ "���\n"
3888#~ "                         - tsv : ������ ���"
3889#~ "(tabs)\n"
3890#~ "                         - xml : ��� ��� �L\n"
3891#~ "                         \n"
3892#~ "  -o | --output � ��������� �� ��"
3893#~ "'�\n"
3894#~ "                       ���������� ����#~ "���n"
3895#~ "                       ��� � '-' � ����� �
3896#~ "���n"
3897#~ "                       � ������ � �� ����#~ "���n"
3898#~ "                       ���� �����������!\n"
3899#~ "  \n"
3900#~ "�����\n"
3901#~ "\n"
3902#~ "  $ dumpykota --data history --format csv >myfile.csv\n"
3903#~ "  \n"
3904#~ "  ���������� ���� ��������n"
3905#~ "  � ��������� ��n"
3906#~ "  \n"
3907#~ "  $ dumpykota --data users --format xml -o users.xml\n"
3908#~ "  \n"
3909#~ "  ���� ��������� users.xml .\n"
3910#~ "  \n"
3911#~ "This program is free software; you can redistribute it and/or modify\n"
3912#~ "it under the terms of the GNU General Public License as published by\n"
3913#~ "the Free Software Foundation; either version 2 of the License, or\n"
3914#~ "(at your option) any later version.\n"
3915#~ "\n"
3916#~ "This program is distributed in the hope that it will be useful,\n"
3917#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
3918#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
3919#~ "GNU General Public License for more details.\n"
3920#~ "\n"
3921#~ "You should have received a copy of the GNU General Public License\n"
3922#~ "along with this program; if not, write to the Free Software\n"
3923#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
3924#~ "USA.\n"
3925#~ "\n"
3926#~ "��� ��� �� e-mail � %s"
3927
3928#~ msgid "Too many arguments, see help."
3929#~ msgstr "������ ��� �����."
3930
3931#~ msgid ""
3932#~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
3933#~ "Libres\n"
3934#~ "A Print Quota editor for PyKota.\n"
3935#~ "\n"
3936#~ "command line usage :\n"
3937#~ "\n"
3938#~ "  edpykota [options] user1 user2 ... userN\n"
3939#~ "  \n"
3940#~ "  edpykota [options] group1 group2 ... groupN\n"
3941#~ "\n"
3942#~ "options :\n"
3943#~ "\n"
3944#~ "  -v | --version       Prints edpykota's version number then exits.\n"
3945#~ "  -h | --help          Prints this message then exits.\n"
3946#~ "  \n"
3947#~ "  -a | --add           Adds users and/or printers if they don't \n"
3948#~ "                       exist on the Quota Storage Server.\n"
3949#~ "                       \n"
3950#~ "  -d | --delete        Deletes users/groups from the quota storage.\n"
3951#~ "                       Printers are never deleted.\n"
3952#~ "                       \n"
3953#~ "  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
3954#~ "                       for a particular printer. Job price is optional.\n"
3955#~ "                       If both are to be set, separate them with a "
3956#~ "comma.\n"
3957#~ "                       Floating point values are allowed.\n"
3958#~ "  \n"
3959#~ "  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
3960#~ "                              listed, separated by commas. The groups\n"
3961#~ "                              must already exist in the Quota Storage.\n"
3962#~ "  \n"
3963#~ "  -u | --users         Edit users print quotas, this is the default.\n"
3964#~ "  \n"
3965#~ "  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
3966#~ "                       use wildcards characters to select only\n"
3967#~ "                       some printers. The default value is *, meaning\n"
3968#~ "                       all printers. \n"
3969#~ "                       You can specify several names or wildcards, \n"
3970#~ "                       by separating them with commas.\n"
3971#~ "  \n"
3972#~ "  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
3973#~ "                       pg1, pg2, etc... which must already exist.\n"
3974#~ "                       A printer group is just like a normal printer,\n"
3975#~ "                       only that it is usually unknown from the printing\n"
3976#~ "                       system. Create printer groups exactly the same\n"
3977#~ "                       way that you create printers, then add other \n"
3978#~ "                       printers to them with this option.\n"
3979#~ "                       Accounting is done on a printer and on all\n"
3980#~ "                       the printer groups it belongs to, quota checking\n"
3981#~ "                       is done on a printer and on all the printer "
3982#~ "groups\n"
3983#~ "                       it belongs to.\n"
3984#~ "  \n"
3985#~ "  -g | --groups        Edit users groups print quotas instead of users.\n"
3986#~ "                          \n"
3987#~ "  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
3988#~ "                       print quotas\n"
3989#~ "                       \n"
3990#~ "  -n | --noquota       Doesn't set a quota but only does accounting.\n"
3991#~ "  \n"
3992#~ "  -r | --reset         Resets the actual page counter for the user\n"
3993#~ "                       or group to zero on the specified printers. \n"
3994#~ "                       The life time page counter is kept unchanged.\n"
3995#~ "                       \n"
3996#~ "  -R | --hardreset     Resets the actual and life time page counters\n"
3997#~ "                       for the user or group to zero on the specified \n"
3998#~ "                       printers. \n"
3999#~ "                       \n"
4000#~ "  -l | --limitby l     Choose if the user/group is limited in "
4001#~ "printing                     \n"
4002#~ "                       by its account balance or by its page quota.\n"
4003#~ "                       The default value is 'quota'. Allowed values\n"
4004#~ "                       are 'quota' 'balance' 'quota-then-balance' and\n"
4005#~ "                       'balance-then-quota'.\n"
4006#~ "                       WARNING : quota-then-balance and balance-then-"
4007#~ "quota\n"
4008#~ "                       are not yet implemented.\n"
4009#~ "                       \n"
4010#~ "  -b | --balance b     Sets the user's account balance to "
4011#~ "b.                     \n"
4012#~ "                       Account balance may be increase or decreased\n"
4013#~ "                       if b is prefixed with + or -.\n"
4014#~ "                       WARNING : when decreasing account balance,\n"
4015#~ "                       the total paid so far by the user is decreased\n"
4016#~ "                       too.\n"
4017#~ "                       Groups don't have a real balance, but the\n"
4018#~ "                       sum of their users' account balance.\n"
4019#~ "                       \n"
4020#~ "  -S | --softlimit sl  Sets the quota soft limit to sl "
4021#~ "pages.                       \n"
4022#~ "  \n"
4023#~ "  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
4024#~ "  \n"
4025#~ "  user1 through userN and group1 through groupN can use wildcards\n"
4026#~ "  if the --add option is not set.\n"
4027#~ "  \n"
4028#~ "examples :                              \n"
4029#~ "\n"
4030#~ "  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
4031#~ "  \n"
4032#~ "  This will add users john, paul, george and ringo to the quota\n"
4033#~ "  database, and set their print quotas to the same values than user \n"
4034#~ "  jerome. User jerome must already exist.\n"
4035#~ "  User ringo's email address will also be set to 'ringo@example.com'\n"
4036#~ "  \n"
4037#~ "  $ edpykota --printer lp -S 50 -H 60 jerome\n"
4038#~ "  \n"
4039#~ "  This will set jerome's print quota on the lp printer to a soft limit\n"
4040#~ "  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
4041#~ "  printer lp doesn't exist on the Quota Storage Server then nothing is "
4042#~ "done.\n"
4043#~ "\n"
4044#~ "  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
4045#~ "  \n"
4046#~ "  Same as above, but if either user jerome or printer lp doesn't exist \n"
4047#~ "  on the Quota Storage Server they are automatically added. Also\n"
4048#~ "  user jerome is put into the groups \"coders\" and \"it\" which must\n"
4049#~ "  already exist in the Quota Storage.\n"
4050#~ "            \n"
4051#~ "  $ edpykota -g -S 500 -H 550 financial support            \n"
4052#~ "  \n"
4053#~ "  This will set print quota soft limit to 500 pages and hard limit\n"
4054#~ "  to 550 pages for groups financial and support on all printers.\n"
4055#~ "  \n"
4056#~ "  $ edpykota --reset jerome \"jo*\"\n"
4057#~ "  \n"
4058#~ "  This will reset jerome's page counter to zero on all printers, as\n"
4059#~ "  well as every user whose name begins with 'jo'.\n"
4060#~ "  Their life time page counter on each printer will be kept unchanged.\n"
4061#~ "  You can also reset the life time page counters by using the\n"
4062#~ "  --hardreset | -R command line option.\n"
4063#~ "  \n"
4064#~ "  $ edpykota --printer hpcolor --noquota jerome\n"
4065#~ "  \n"
4066#~ "  This will tell PyKota to not limit jerome when printing on the \n"
4067#~ "  hpcolor printer. All his jobs will be allowed on this printer, but \n"
4068#~ "  accounting of the pages he prints will still be kept.\n"
4069#~ "  Print Quotas for jerome on other printers are unchanged.\n"
4070#~ "  \n"
4071#~ "  $ edpykota --limitby balance jerome\n"
4072#~ "  \n"
4073#~ "  This will tell PyKota to limit jerome by his account's balance\n"
4074#~ "  when printing.\n"
4075#~ "  \n"
4076#~ "  $ edpykota --balance +10.0 jerome\n"
4077#~ "  \n"
4078#~ "  This will increase jerome's account balance by 10.0 (in your\n"
4079#~ "  own currency). You can decrease the account balance with a\n"
4080#~ "  dash prefix, and set it to a fixed amount with no prefix.\n"
4081#~ "  \n"
4082#~ "  $ edpykota --delete jerome rachel\n"
4083#~ "  \n"
4084#~ "  This will completely delete jerome and rachel from the Quota Storage\n"
4085#~ "  database. All their quotas and jobs will be deleted too.\n"
4086#~ "  \n"
4087#~ "  $ edpykota --printer lp --charge 0.1\n"
4088#~ "  \n"
4089#~ "  This will set the page price for printer lp to 0.1. Job price\n"
4090#~ "  will not be changed.\n"
4091#~ "  \n"
4092#~ "  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
4093#~ "  \n"
4094#~ "  This will put printers hplj1 and hplj2 in printers groups Laser and "
4095#~ "HP.\n"
4096#~ "  When printing either on hplj1 or hplj2, print quota will also be \n"
4097#~ "  checked and accounted for on virtual printers Laser and HP.\n"
4098#~ "\n"
4099#~ "This program is free software; you can redistribute it and/or modify\n"
4100#~ "it under the terms of the GNU General Public License as published by\n"
4101#~ "the Free Software Foundation; either version 2 of the License, or\n"
4102#~ "(at your option) any later version.\n"
4103#~ "\n"
4104#~ "This program is distributed in the hope that it will be useful,\n"
4105#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
4106#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
4107#~ "GNU General Public License for more details.\n"
4108#~ "\n"
4109#~ "You should have received a copy of the GNU General Public License\n"
4110#~ "along with this program; if not, write to the Free Software\n"
4111#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
4112#~ "USA.\n"
4113#~ "\n"
4114#~ "Please e-mail bugs to: %s"
4115#~ msgstr ""
4116#~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
4117#~ "Libres\n"
4118#~ "�������� � �yKota.\n"
4119#~ "\n"
4120#~ "���� ���\n"
4121#~ "\n"
4122#~ "  edpykota [��� �� �� ... ��\n"
4123#~ "  \n"
4124#~ "  edpykota [��� �� �� ... ��\n"
4125#~ "\n"
4126#~ "���:\n"
4127#~ "\n"
4128#~ "  -v | --version       ��� �����edpykota� ���.\n"
4129#~ "  -h | --help          ��� ����� ���.\n"
4130#~ "  \n"
4131#~ "  -a | --add           �������/���� �� ��\n"
4132#~ "                       �����������"
4133#~ "                       \n"
4134#~ "  -d | --delete        ������� � �������"
4135#~ "                       ��������������\n"
4136#~ "                       \n"
4137#~ "  -c | --charge p[,j]  ����� ��� ��� � "
4138#~ "���"
4139#~ "                       � ������� �� ����"
4140#~ "��n"
4141#~ "                       ���. � ������, ���"
4142#~ "���"
4143#~ "                       �� �������� ���\n"
4144#~ "  \n"
4145#~ "  -i | --ingroups g1[,g2...]  ����� ����� � �"
4146#~ "��\n"
4147#~ "                              ���������� � "
4148#~ "��\n"
4149#~ "                              ����� ��������"
4150#~ "  \n"
4151#~ "  -u | --users         ��������� �� ����"
4152#~ "�"
4153#~ "                       �������n"
4154#~ "  \n"
4155#~ "  -P | --printer p     �������� �������"
4156#~ "p.\n"
4157#~ "                       ����p ���������� "
4158#~ "�n"
4159#~ "                       ��� �������� ����"
4160#~ "�\n"
4161#~ "                       ��*, �� �����n"
4162#~ "                       ������������ ��� \n"
4163#~ "                       �������.\n"
4164#~ "  \n"
4165#~ "  -G | --pgroups pg1[,pg2...] ������ ���� � ��\n"
4166#~ "                       ����g1, pg2, �.�����"
4167#~ "���.\n"
4168#~ "                       �������������� "
4169#~ "��"
4170#~ "                       ��� ������� ���.\n"
4171#~ "                       ������ ����������
4172#~ "�n"
4173#~ "                       �������� �����
4174#~ "���\n"
4175#~ "                       �� �������n"
4176#~ "                       ����� � �������� "
4177#~ "�n"
4178#~ "                       ���� � ���� �����"
4179#~ "���
4180#~ "                       ��.\n"
4181#~ "  \n"
4182#~ "  -g | --groups        �������� � �� ����"
4183#~ "�\n"
4184#~ "                       �� ��\n"
4185#~ "                          \n"
4186#~ "  -p | --prototype u|g �������� ����g ��"
4187#~ "�\n"
4188#~ "                       �������\n"
4189#~ "                       \n"
4190#~ "  -n | --noquota       ���������� "
4191#~ "����.\n"
4192#~ "  \n"
4193#~ "  -r | --reset         ������� �� � ��� �n"
4194#~ "                       ��� � ������� \n"
4195#~ "                       �������� �����\n"
4196#~ "                       \n"
4197#~ "  -R | --hardreset     �������� � ��� "
4198#~ "����\n"
4199#~ "                       � ��� ��������� \n"
4200#~ "                       ���. \n"
4201#~ "                       \n"
4202#~ "  -l | --limitby l     �������������� "
4203#~ "���                       � ��� ��������
4204#~ "������\n"
4205#~ "                       ������ ��'quota' (�
4206#~ "���).\n"
4207#~ "                       ���� ��� 'quota' (����n"
4208#~ "                       'balance' (������), 'quota-then-"
4209#~ "balance' (��"
4210#~ "                       �� ���� 'balance-then-"
4211#~ "quota' (����\n"
4212#~ "                       ���                       ����: � "
4213#~ "��� quota-then-balance � balance-then-quota\n"
4214#~ "                       � �� ��� ��\n"
4215#~ "                       \n"
4216#~ "  -b | --balance b     ������ ��� ����� "
4217#~ "���.\n"
4218#~ "                       � ��������������"
4219#~ "�����n"
4220#~ "                       � � � ����+ �-.\n"
4221#~ "                       ����: ������� ���, "
4222#~ "�����,\n"
4223#~ "                       �� ������� �����
4224#~ "����"
4225#~ "                       ��\n"
4226#~ "                       � �� � �� ��� ������
4227#~ "����n"
4228#~ "                       ��������.\n"
4229#~ "                       \n"
4230#~ "  -S | --softlimit sl  ���������l ��\n"
4231#~ "  \n"
4232#~ "  -H | --hardlimit hl  ����� ���� hl ��.\n"
4233#~ "  \n"
4234#~ "  ������ � �� � �� � �� �� �"
4235#~ "����#~ "  ����� �� ����--add.\n"
4236#~ "  \n"
4237#~ "����                              \n"
4238#~ "\n"
4239#~ "  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
4240#~ "  \n"
4241#~ "  ����� ��john, paul, george � ringo ���"
4242#~ "  ���, � ������ � � �� ��"
4243#~ "  ����erome. ���jerome ������\n"
4244#~ "  �������mail �� ���ingo �"
4245#~ "  'ringo@example.com'\n"
4246#~ "  \n"
4247#~ "  $ edpykota --printer lp -S 50 -H 60 jerome\n"
4248#~ "  \n"
4249#~ "  �������erome � ���lp ��
4250#~ "����n"
4251#~ "  50 ��, � �� �0 ��. � �� ��jerome ��"
4252#~ "  ���� � ��������������    "
4253#~ "����\n"
4254#~ "\n"
4255#~ "  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
4256#~ "  \n"
4257#~ "  ��� ��, ���� �� �� ��jerome �� \n"
4258#~ "  ��� lp ������������ ����
4259#~ "��n"
4260#~ "  jerome ������� \"coders\" � \"it\" ����n"
4261#~ "  ��� ������"
4262#~ "            \n"
4263#~ "  $ edpykota -g -S 500 -H 550 financial support            \n"
4264#~ "  \n"
4265#~ "  ���������00 �� � ��� ��50\n"
4266#~ "  �� � ��� financial � support �������"
4267#~ "  \n"
4268#~ "  $ edpykota --reset jerome \"jo*\"\n"
4269#~ "  \n"
4270#~ "  ����� ��������erome � ����"
4271#~ "���"
4272#~ "  ������'jo' �������"
4273#~ "  ������ � ����� �������"
4274#~ "  ������ ��� � �����������#~ "�n"
4275#~ "  ���-hardreset | -R .\n"
4276#~ "  \n"
4277#~ "  $ edpykota --printer hpcolor --noquota jerome\n"
4278#~ "  \n"
4279#~ "  �������� ���erome � ����"
4280#~ "hpcolor. \n"
4281#~ "  �� ����������� ��� ���
4282#~ "���� \n"
4283#~ "  ���� ��������\n"
4284#~ "  � �����rome ���������
4285#~ "���.\n"
4286#~ "  \n"
4287#~ "  $ edpykota --limitby balance jerome\n"
4288#~ "  \n"
4289#~ "  �������erome ������ ��� �\n"
4290#~ "  \n"
4291#~ "  $ edpykota --balance +10.0 jerome\n"
4292#~ "  \n"
4293#~ "  ������ �����jerome ��10.0 ���(�"
4294#~ "��n"
4295#~ "  ��� ������� ��� ����(-) ���"
4296#~ "  �� ��� �� � ���\n"
4297#~ "  \n"
4298#~ "  $ edpykota --delete jerome rachel\n"
4299#~ "  \n"
4300#~ "  ���������jerome � rachel � ������"
4301#~ "  ������� � ��� ����������\n"
4302#~ "  \n"
4303#~ "  $ edpykota --printer lp --charge 0.1\n"
4304#~ "  \n"
4305#~ "  ���� ��� � �����.1. �� ����n"
4306#~ "  ������\n"
4307#~ "  \n"
4308#~ "  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
4309#~ "  \n"
4310#~ "  ���� ��� hplj1 � hplj2 � �� ����aser � "
4311#~ "HP.\n"
4312#~ "  ������� ���hplj1 ��plj2, ����� "
4313#~ "�n"
4314#~ "  ��� � ���� � � ������Laser � "
4315#~ "HP.\n"
4316#~ "\n"
4317#~ "This program is free software; you can redistribute it and/or modify\n"
4318#~ "it under the terms of the GNU General Public License as published by\n"
4319#~ "the Free Software Foundation; either version 2 of the License, or\n"
4320#~ "(at your option) any later version.\n"
4321#~ "\n"
4322#~ "This program is distributed in the hope that it will be useful,\n"
4323#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
4324#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
4325#~ "GNU General Public License for more details.\n"
4326#~ "\n"
4327#~ "You should have received a copy of the GNU General Public License\n"
4328#~ "along with this program; if not, write to the Free Software\n"
4329#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
4330#~ "USA.\n"
4331#~ "\n"
4332#~ "��� ��� �� e-mail � %s"
4333
4334#~ msgid ""
4335#~ "Group           used    soft    hard    balance grace         total       "
4336#~ "paid"
4337#~ msgstr ""
4338#~ "���         �� �� �� �����       ��     "
4339#~ "��"
4340
4341#~ msgid ""
4342#~ "User            used    soft    hard    balance grace         total       "
4343#~ "paid"
4344#~ msgstr ""
4345#~ "���        �� �� �� �����       ��     "
4346#~ "��"
4347
4348#~ msgid "Waiting for printer %s to be idle or printing..."
4349#~ msgstr "���� ��� ������ � ���%s..."
Note: See TracBrowser for help on using the browser.