root / pykota / trunk / po / de / pykota.po @ 2772

# PyKota
#
# PyKota : Print Quotas for CUPS and LPRng
#
# (c) 2003, 2004, 2005 Jerome Alet <alet@librelogiciel.com>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# $Id$
#
# PyKota translation master file.
# Copyright (c) 2003, 2004, 2005 Conseil Internet & Logiciels Libres
# Jerome Alet <alet@librelogiciel.com>, 2003, 2004, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: PyKota v1.20\n"
"Report-Msgid-Bugs-To: alet@librelogiciel.com\n"
"POT-Creation-Date: 2004-11-25 10:16+0100\n"
"PO-Revision-Date: 2004-11-02 08:47+0100\n"
"Last-Translator: Johannes L�ermann <johannes.laemmermann@t-online.de>\n"
"Language-Team: German <alet@librelogiciel.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"

#, python-format
msgid ""
"autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A tool to automate user account creation and initial balance setting.\n"
"\n"
"THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n"
"\n"
"command line usage :\n"
"\n"
"  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
"  OF AN external policy IN pykota.conf\n"
"  \n"
"  autopykota { -i | --initbalance value } \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints autopykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -i | --initbalance b Sets the user's account initial balance value to b.\n"
"                       If the user already exists, actual balance is left\n"
"                       unmodified. If unset, the default value is 0.\n"
msgstr ""

#, python-format
msgid "SIGTERM received, job %s cancelled."
msgstr "SIGTERM empfangen, Auftrag %s abgebrochen."

msgid "You are not allowed to print at this time."
msgstr ""

#, python-format
msgid "Unable to precompute the job's size with the generic PDL analyzer : %s"
msgstr ""
"Vorausberechnung der Auftragsgr�nicht m�ch mit der allgemeinen PDL "
"Analyseroutine : %s"

#, python-format
msgid "Banner generator %s exit code is %s"
msgstr ""

msgid "Banner won't be printed : maximum number of deny banners reached."
msgstr ""

#, python-format
msgid "Beware : computed job size (%s) != precomputed job size (%s)"
msgstr ""

msgid ""
"The job size will be trusted anyway according to the 'trustjobsize' directive"
msgstr ""

#, python-format
msgid ""
"The job size will be trusted because it is inferior to the 'trustjobsize' "
"directive's limit %s"
msgstr ""

#, python-format
msgid ""
"The job size will be modified according to the 'trustjobsize' directive : %s"
msgstr ""

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying external policy (%"
"s) for printer %s"
msgstr ""
"Drucker %s ist nicht im PyKota System registriert, wende externe Richtlinie "
"(%s) f�cker %s an"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying external policy (%s) "
"for printer %s"
msgstr ""
"Benutzer %s ist nicht in der PyKota-Verwaltung registriert, wende externe "
"Richtlinie (%s) f�cker %s an"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"external policy (%s) for printer %s"
msgstr ""
"Benutzer %s hat in der PyKota-Verwaltung kein Kontingent auf Drucker %s, "
"wende externe Richtlinie (%s) f�cker %s an"

#, python-format
msgid ""
"External policy %s for printer %s produced an error. Job rejected. Please "
"check PyKota's configuration files."
msgstr ""
"Externe Richtlinie %s f�cker %s hat eine Fehler erzeugt. Auftrag "
"abgelehnt. Bitte ��ie PyKota's Konfigurationsdatei."

#, python-format
msgid ""
"Printer %s not registered in the PyKota system, applying default policy (%s)"
msgstr ""
"Drucker %s ist nicht in der PyKota-Verwaltung registriert, wende Standard-"
"Richtlinie (%s) an"

#, python-format
msgid ""
"User %s not registered in the PyKota system, applying default policy (%s) "
"for printer %s"
msgstr ""
"Benutzer %s ist nicht in der PyKota-Verwaltung registriert, wende Standard-"
"Richtlinie (%s) f�cker %s an"

#, python-format
msgid ""
"User %s doesn't have quota on printer %s in the PyKota system, applying "
"default policy (%s)"
msgstr ""
"Benutzer %s hat in der PyKota-Verwaltung f�cker %s kein Kontingent, "
"wende Standard-Richtlinie (%s) an"

#, python-format
msgid ""
"Printer %s still not registered in the PyKota system, job will be rejected"
msgstr ""
"Drucker %s noch immer nicht in der PyKota-Verwaltung registriert, Auftrag "
"wird abgelehnt werden"

#, python-format
msgid ""
"User %s still not registered in the PyKota system, job will be rejected on "
"printer %s"
msgstr ""
"Benutzer %s noch immer nicht in der PyKota-Verwaltung registriert, Auftrag "
"f�cker %s wird abgelehnt"

#, python-format
msgid ""
"User %s still doesn't have quota on printer %s in the PyKota system, job "
"will be rejected"
msgstr ""
"Benutzer %s hat in der PyKota-Verwaltung noch immer kein Kontingent f�Drucker %s, Auftrag wird abgelehnt"

msgid "Job is a dupe"
msgstr ""

msgid "Printing is denied by configuration"
msgstr ""

#, python-format
msgid "Duplicate print jobs are not allowed on printer %s."
msgstr ""

msgid "Subprocess denied printing of a dupe"
msgstr ""

#, python-format
msgid "Duplicate print jobs are not allowed on printer %s at this time."
msgstr ""

msgid "Subprocess allowed printing of a dupe"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""

#, python-format
msgid "Impossible to connect to SMTP server : %s"
msgstr "SMTP-Server kann nicht erreicht werden: %s"

msgid "Print Quota"
msgstr "Druckkontingent"

#, python-format
msgid "Impossible to send mail to %s, error %s : %s"
msgstr "Unm�ch Mail an %s zu senden, Fehler %s : %s"

msgid "Job contains no data. Printing is denied."
msgstr "Auftrag beinhaltet keine Daten. Druck verweigert."

msgid "Job allowed by printer policy. No accounting will be done."
msgstr ""

#, python-format
msgid "Invalid policy %s for printer %s"
msgstr "Ung� Richtlinie ('policy') %s f�cker %s"

#, python-format
msgid "Precomputed job size (%s pages) too large for printer %s."
msgstr ""

#, python-format
msgid "You are not allowed to print so many pages on printer %s at this time."
msgstr ""

#, python-format
msgid "User %s is not allowed to print at this time."
msgstr ""

msgid "Your account settings forbid you to print at this time."
msgstr ""

#, python-format
msgid "Print Quota exceeded for user %s on printer %s"
msgstr "�erzogenes Druckkontingent f�utzer %s auf Drucker %s"

#, python-format
msgid "Print Quota low for user %s on printer %s"
msgstr "Niedriges Druckkontingent f�utzer %s auf Drucker %s"

msgid "Job denied, no accounting will be done."
msgstr ""

msgid "Job accounting begins."
msgstr "Auftrag Accounting beginnt."

msgid "Job denied, no accounting has been done."
msgstr ""

msgid "Job accounting ends."
msgstr "Auftrag Accounting endet."

msgid "Job size forced to 0 because printing is denied."
msgstr "Auftragsgr�festgesetzt auf 0, weil der Druck verweigert wurde."

#, python-format
msgid "Job size : %i"
msgstr "Auftragsgr� %i"

#, python-format
msgid "User %s's quota on printer %s won't be modified"
msgstr ""

#, python-format
msgid "Updating user %s's quota on printer %s"
msgstr "Das Kontingent f�utzer %s auf Drucker %s wird angepasst"

msgid "Job added to history."
msgstr "Auftrag zum Verlauf hinzugef�
#, python-format
msgid "Billing code %s was updated."
msgstr ""

#, python-format
msgid ""
"dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Dumps PyKota database's content.\n"
"\n"
"command line usage :\n"
"\n"
"  dumpykota [options] [filterexpr]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints dumpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
"                       \n"
"                         - history : dumps the jobs history.\n"
"                         - users : dumps users.\n"
"                         - groups : dumps user groups.\n"
"                         - printers : dump printers.\n"
"                         - upquotas : dump user quotas.\n"
"                         - gpquotas : dump user groups quotas.\n"
"                         - payments : dumps user payments.\n"
"                         - pmembers : dumps printer groups members.\n"
"                         - umembers : dumps user groups members.\n"
"                         - billingcodes : dumps billing codes.\n"
"                         \n"
"                       NB : the -d | --data command line option   \n"
"                       is MANDATORY.\n"
"  \n"
"  -f | --format fmt    Dumps datas in the 'fmt' format. When not specified,\n"
"                       the format is to dump datas in the csv format (comma\n"
"                       separated values). All data dumped is between double\n"
"                       quotes. Allowed formats are :\n"
"                       \n"
"                         - csv : separate datas with commas\n"
"                         - ssv : separate datas with semicolons\n"
"                         - tsv : separate datas with tabs\n"
"                         - xml : dump data as XML\n"
"                         - cups : dump datas in CUPS' page_log format :\n"
"                                  ONLY AVAILABLE WITH --data history\n"
"                         \n"
"  -o | --output fname  All datas will be dumped to the file instead of\n"
"                       to the standard output. The special '-' filename\n"
"                       is the default value and means stdout.\n"
"                       WARNING : existing files are truncated !\n"
"\n"
"  -s | --sum           Summarize the selected datas.\n"
"                           ONLY AVAILABLE WITH --data history or payments\n"
"\n"
"  Use the filter expressions to extract only parts of the \n"
"  datas. Allowed filters are of the form :\n"
"                \n"
"         key=value\n"
"                         \n"
"  Allowed keys for now are :  \n"
"                       \n"
"         username       User's name\n"
"         groupname      Users group's name\n"
"         printername    Printer's name\n"
"         pgroupname     Printers group's name\n"
"         hostname       Client's hostname\n"
"         billingcode    Job's billing code\n"
"         start          Job's date of printing\n"
"         end            Job's date of printing\n"
"         \n"
"  Contrary to other PyKota management tools, wildcard characters are not \n"
"  expanded, so you can't use them.\n"
"  \n"
"  NB : not all keys are allowed for each data type, so the result may be \n"
"  empty if you use a key not available for a particular data type.\n"
"  \n"
"Examples :\n"
"\n"
"  $ dumpykota --data history --format csv >myfile.csv\n"
"  \n"
"  This dumps the history in a comma separated values file, for possible\n"
"  use in a spreadsheet.\n"
"  \n"
"  $ dumpykota --data users --format xml -o users.xml\n"
"  \n"
"  Dumps all users datas to the users.xml file.\n"
"  \n"
"  $ dumpykota --data history printername=HP2100 username=jerome\n"
"  \n"
"  Dumps the job history for user jerome on printer HP2100 only.\n"
"  \n"
"  $ dumpykota --data history start=200503 end=20050730234615\n"
"  \n"
"  Dumps all jobs printed between March 1st 2005 at midnight and\n"
"  July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n"
msgstr ""

msgid "The -d | --data command line option is mandatory, see help."
msgstr "Die Kommandozeilenoption -d | --data ist unerl�lich, siehe Hilfe."

#, python-format
msgid ""
"edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A Print Quota editor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  edpykota [options] user1 user2 ... userN\n"
"  \n"
"  edpykota [options] group1 group2 ... groupN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints edpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds users and/or printers if they don't \n"
"                       exist on the Quota Storage Server.\n"
"                       \n"
"  -d | --delete        Deletes users/groups from the quota storage.\n"
"                       Printers are never deleted.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
"                       for a particular printer. Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point values are allowed.\n"
"                       \n"
"  -o | --overcharge f  Sets the overcharging factor applied to the user \n"
"                       when computing the cost of a print job. Positive or \n"
"                       negative floating point values are allowed,\n"
"                       this allows you to do some really creative\n"
"                       things like giving money to an user whenever\n"
"                       he prints. The number of pages in a print job\n"
"                       is not modified by this coefficient, only the\n"
"                       cost of the job for a particular user.\n"
"                       Only users have a coefficient.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
"                              listed, separated by commas. The groups\n"
"                              must already exist in the Quota Storage.\n"
"  \n"
"  -u | --users         Edit users print quotas, this is the default.\n"
"  \n"
"  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers. \n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
"                       pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"  \n"
"  -g | --groups        Edit users groups print quotas instead of users.\n"
"                          \n"
"  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
"                       print quotas\n"
"                       \n"
"  -n | --noquota       Sets both soft and hard limits to None for a\n"
"                       particular print quota entry.\n"
"                       This is NOT the same as --limitby noquota\n"
"                       which acts on ALL print quota entries for a\n"
"                       particular user.\n"
"  \n"
"  -r | --reset         Resets the actual page counter for the user\n"
"                       or group to zero on the specified printers. \n"
"                       The life time page counter is kept unchanged.\n"
"                       \n"
"  -R | --hardreset     Resets the actual and life time page counters\n"
"                       for the user or group to zero on the specified \n"
"                       printers. This is a shortcut for '--used 0'.\n"
"                       \n"
"  -l | --limitby l     Choose if the user/group is limited in "
"printing                     \n"
"                       by its account balance or by its page quota.\n"
"                       The default value is 'quota'. Allowed values\n"
"                       are 'quota' 'balance' 'noquota' 'noprint' \n"
"                       and 'nochange' :\n"
"                       \n"
"                         - quota : limit by number of pages per printer.\n"
"                         - balance : limit by number of credits in account.\n"
"                         - noquota : no limit, accounting still done.\n"
"                         - nochange : no limit, accounting not done. \n"
"                         - noprint : printing is denied. \n"
"                       NB : nochange and noprint are not supported for "
"groups.\n"
"                       \n"
"  -b | --balance b     Sets the user's account balance to "
"b.                     \n"
"                       Account balance may be increase or decreased\n"
"                       if b is prefixed with + or -.\n"
"                       WARNING : when decreasing account balance,\n"
"                       the total paid so far by the user is decreased\n"
"                       too.\n"
"                       Groups don't have a real balance, but the\n"
"                       sum of their users' account balance.\n"
"                       \n"
"  -C | --comment txt   Defines some informational text to be associated\n"
"                       with a change to an user's account balance.\n"
"                       Only meaningful if -b | --balance is also used.\n"
"                       \n"
"  -S | --softlimit sl  Sets the quota soft limit to sl "
"pages.                       \n"
"  \n"
"  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
"  \n"
"  -I | --increase v    Increase both Soft and Hard limits by the value\n"
"                       of v. You can prefix v with + or -, if no sign is\n"
"                       used, + is assumed.\n"
"\n"
"  -U | --used usage    Sets the pagecounters for the user to usage pages;\n"
"                       useful for migrating users from a different system\n"
"                       where they have already used some pages. Actual\n"
"                       and Life Time page counters may be increased or "
"decreased\n"
"                       if usage is prefixed with + or -.\n"
"                       WARNING : BOTH page counters are modified in all "
"cases,\n"
"                       so be careful.\n"
"                       NB : if 'usage' equals '0', then the action taken is\n"
"                       the same as if --hardreset was used.\n"
"\n"
"  user1 through userN and group1 through groupN can use wildcards\n"
"  if the --add option is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
"  \n"
"  This will add users john, paul, george and ringo to the quota\n"
"  database, and set their print quotas to the same values than user \n"
"  jerome. User jerome must already exist.\n"
"  User ringo's email address will also be set to 'ringo@example.com'\n"
"  \n"
"  $ edpykota --printer lp -S 50 -H 60 jerome\n"
"  \n"
"  This will set jerome's print quota on the lp printer to a soft limit\n"
"  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
"  printer lp doesn't exist on the Quota Storage Server then nothing is "
"done.\n"
"\n"
"  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
"  \n"
"  Same as above, but if either user jerome or printer lp doesn't exist \n"
"  on the Quota Storage Server they are automatically added. Also\n"
"  user jerome is put into the groups \"coders\" and \"it\" which must\n"
"  already exist in the Quota Storage.\n"
"            \n"
"  $ edpykota -g -S 500 -H 550 financial support            \n"
"  \n"
"  This will set print quota soft limit to 500 pages and hard limit\n"
"  to 550 pages for groups financial and support on all printers.\n"
"  \n"
"  $ edpykota --reset jerome \"jo*\"\n"
"  \n"
"  This will reset jerome's page counter to zero on all printers, as\n"
"  well as every user whose name begins with 'jo'.\n"
"  Their life time page counter on each printer will be kept unchanged.\n"
"  You can also reset the life time page counters by using the\n"
"  --hardreset | -R command line option.\n"
"  \n"
"  $ edpykota --printer hpcolor --noquota jerome\n"
"  \n"
"  This will tell PyKota to not limit jerome when printing on the \n"
"  hpcolor printer. All his jobs will be allowed on this printer, but \n"
"  accounting of the pages he prints will still be kept.\n"
"  Print Quotas for jerome on other printers are unchanged.\n"
"  \n"
"  $ edpykota --limitby balance jerome\n"
"  \n"
"  This will tell PyKota to limit jerome by his account's balance\n"
"  when printing.\n"
"  \n"
"  $ edpykota --balance +10.0 jerome\n"
"  \n"
"  This will increase jerome's account balance by 10.0 (in your\n"
"  own currency). You can decrease the account balance with a\n"
"  dash prefix, and set it to a fixed amount with no prefix.\n"
"  \n"
"  $ edpykota --delete jerome rachel\n"
"  \n"
"  This will completely delete jerome and rachel from the Quota Storage\n"
"  database. All their quotas and jobs will be deleted too.\n"
"  \n"
"  $ edpykota --printer lp --charge 0.1\n"
"  \n"
"  This will set the page price for printer lp to 0.1. Job price\n"
"  will not be changed.\n"
"  \n"
"  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
"  \n"
"  This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n"
"  When printing either on hplj1 or hplj2, print quota will also be \n"
"  checked and accounted for on virtual printers Laser and HP.\n"
"  \n"
"  $ edpykota --overcharge 2.5 poorstudent\n"
"  \n"
"  This will overcharge the poorstudent user by a factor of 2.5.\n"
"  \n"
"  $ edpykota --overcharge -1 jerome\n"
"  \n"
"  User jerome will actually earn money whenever he prints.\n"
"  \n"
"  $ edpykota --overcharge 0 boss\n"
"  \n"
"  User boss can print at will, it won't cost him anything because the\n"
"  cost of each print job will be multiplied by zero before charging\n"
"  his account.\n"
msgstr ""

msgid "You're not allowed to use this command."
msgstr "Sie d�diesen Befehl nicht ben�"

#, python-format
msgid "Invalid limitby value %s"
msgstr "Ung�r Wert f�itby %s"

#, python-format
msgid "Invalid used value %s."
msgstr ""

#, python-format
msgid "Invalid increase value %s."
msgstr ""

#, python-format
msgid "Invalid softlimit value %s."
msgstr "Ung�r Wert f�tlimit %s."

#, python-format
msgid "Invalid hardlimit value %s."
msgstr "Ung�r Wert f�dlimit %s."

#, python-format
msgid "Hard limit %i is less than soft limit %i, values will be exchanged."
msgstr "Hardlimit %i ist kleiner als Softlimit %i, Werte werden ausgetauscht."

#, python-format
msgid "Invalid overcharge value %s"
msgstr ""

#, python-format
msgid "Invalid balance value %s"
msgstr "Ung�r Wert f�ance %s"

#, python-format
msgid "Invalid charge amount value %s"
msgstr "Ung�r Wert f�ish�%s"

#, python-format
msgid "Impossible to add printer %s"
msgstr "Unm�ch den Drucker %s hinzuzuf�
#, python-format
msgid "Invalid printer name %s"
msgstr "Ung�r Druckername %s"

#, python-format
msgid "There's no printer matching %s"
msgstr "Kein Drucker stimmt mit %s berein"

msgid "You have to pass user or group names on the command line"
msgstr "Sie m�Benutzer- oder Gruppenname auf der Kommandozeile �ben"

#, python-format
msgid "Prototype object %s not found in Quota Storage."
msgstr "Prototyp Objekt %s in Kontingentverwaltung nicht gefunden."

#, python-format
msgid "Prototype %s not found in Quota Storage for printer %s."
msgstr "Prototyp %s in Kontingentverwaltung f�cker %s nicht gefunden."

#, python-format
msgid "Undefined hard limit set to soft limit (%s) on printer %s."
msgstr "Nicht definiertes Hardlimit auf Softlimit (%s) f�cker %s gesetzt."

#, python-format
msgid "Undefined soft limit set to hard limit (%s) on printer %s."
msgstr "Nicht definiertes Softlimit auf Hardlimit (%s) f�cker %s gesetzt."

#, python-format
msgid "Invalid email address %s"
msgstr "Ung� Email-Adresse %s"

#, python-format
msgid "Unknown group %s"
msgstr ""

#, python-format
msgid "Unknown user %s"
msgstr ""

#, python-format
msgid "Invalid group name %s"
msgstr "Ung�r Gruppenname %s"

#, python-format
msgid "Invalid user name %s"
msgstr "Ung�r Benutzername %s"

#, python-format
msgid "Quota not found for object %s on printer %s."
msgstr "Kontingent f�ekt %s auf Drucker %s nicht gefunden."

#, python-format
msgid "You can't increase limits by %s when no limit is set."
msgstr ""

msgid "You can't set negative limits."
msgstr ""

#, python-format
msgid "Group %s not found in the PyKota Storage."
msgstr "Gruppe %s in der PyKota Kontingentverwaltung nicht gefunden."

#, python-format
msgid "Nonexistent user %s or missing print quota entry."
msgstr ""

#, python-format
msgid "Nonexistent group %s or missing print quota entry."
msgstr ""

msgid "incompatible options, see help."
msgstr "Inkompatible Optionen, siehe Hilfe."

#, python-format
msgid ""
"repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Generates print quota reports.\n"
"\n"
"command line usage :\n"
"\n"
"  repykota [options] \n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints repykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Generates a report on users quota, this is \n"
"                       the default.\n"
"  \n"
"  -g | --groups        Generates a report on group quota instead of users.\n"
"  \n"
"  -i | --ingroups g1[,g2...]  Only lists users who are members of these\n"
"                              groups. Reserved to PyKota Administrators.\n"
"  \n"
"  -P | --printer p     Report quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ repykota --printer lp\n"
"  \n"
"  This will print the quota status for all users who use the lp printer.\n"
"\n"
"  $ repykota \n"
"  \n"
"  This will print the quota status for all users on all printers.\n"
"  \n"
"  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
"  \n"
"  This will print the quota status for user jerome and all users\n"
"  whose name begins with \"jo\" on all printers which name begins\n"
"  with \"laser\" or ends with \"pson\".\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
msgstr ""

msgid "Option --ingroups is reserved to PyKota Administrators."
msgstr ""

#, python-format
msgid ""
"warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Sends mail to users over print quota.\n"
"\n"
"command line usage :\n"
"\n"
"  warnpykota  [options]  [names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints warnpykota's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -u | --users         Warns users over their print quota, this is the \n"
"                       default.\n"
"  \n"
"  -g | --groups        Warns users whose groups quota are over limit.\n"
"  \n"
"  -P | --printer p     Verify quotas on this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ warnpykota --printer lp\n"
"  \n"
"  This will warn all users of the lp printer who have exceeded their\n"
"  print quota.\n"
"\n"
"  $ warnpykota \n"
"  \n"
"  This will warn all users  who have exceeded their print quota on\n"
"  any printer.\n"
"\n"
"  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
"  \n"
"  This will warn all users of groups which names begins with \"dev\" and\n"
"  who have exceeded their print quota on any printer which name begins \n"
"  with \"laserjet\"\n"
"  \n"
"  If launched by an user who is not a PyKota administrator, additionnal\n"
"  arguments representing users or groups names are ignored, and only the\n"
"  current user/group is reported.\n"
msgstr ""

#, python-format
msgid ""
"pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Generates banners.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbanner  [options]  [more info]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbanner's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -l | --logo img      Use the image as the banner's logo. The logo will\n"
"                       be drawn at the center top of the page. The default\n"
"                       logo is /usr/share/pykota/logos/pykota.jpeg\n"
"                       \n"
"  -p | --pagesize sz   Sets sz as the page size. Most well known\n"
"                       page sizes are recognized, like 'A4' or 'Letter'\n"
"                       to name a few. The default size is A4.\n"
"  \n"
"  -s | --savetoner s   Sets the text luminosity factor to s%%. This can be \n"
"                       used to save toner. The default value is 0, which\n"
"                       means that no toner saving will be done.\n"
"  \n"
"  -u | --url u         Uses u as an url to be written at the bottom of \n"
"                       the banner page. The default url is :\n"
"                       http://www.librelogiciel.com/software/\n"
"  \n"
"examples :                              \n"
"\n"
"  Using pkbanner directly from the command line is not recommended,\n"
"  excepted for testing purposes. You should use pkbanner in the\n"
"  'startingbanner' or 'endingbanner' directives in pykota.conf\n"
"  \n"
"    startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n"
"  \n"
"      With such a setting in pykota.conf, all print jobs will be \n"
"      prefixed with an A4 banner with no logo, and text luminosity will\n"
"      be increased by 75%%. The PostScript output will be directly sent\n"
"      to your printer.\n"
"      \n"
"  You'll find more examples in the sample configuration file included    \n"
"  in PyKota.\n"
msgstr ""

msgid "Unknown"
msgstr ""

msgid "Username"
msgstr ""

msgid "More Info"
msgstr ""

msgid "Job"
msgstr ""

msgid "Date"
msgstr "Datum"

msgid "Allowed"
msgstr ""

msgid "Denied"
msgstr ""

msgid "Allowed with Warning"
msgstr ""

msgid "Result"
msgstr ""

msgid "Title"
msgstr "Titel"

msgid "Filename"
msgstr "Dateiname"

#, python-format
msgid "Pages printed so far on %s"
msgstr ""

msgid "Account balance"
msgstr ""

msgid "Soft Limit"
msgstr ""

msgid "Hard Limit"
msgstr ""

msgid "Date Limit"
msgstr ""

msgid "Allowed range is (0..99)"
msgstr ""

#, python-format
msgid "Invalid 'savetoner' option %s : %s"
msgstr ""

#, python-format
msgid "Invalid 'pagesize' option %s, defaulting to A4."
msgstr ""

#, python-format
msgid ""
"pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A billing codes Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkbcodes [options] code1 code2 code3 ... codeN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkbcodes version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds billing codes if they don't exist in PyKota's\n"
"                       database. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"\n"
"  -d | --delete        Deletes billing codes from PyKota's database.\n"
"                       NB : the history entries with this billing code\n"
"                       are not deleted, voluntarily.\n"
"\n"
"  -D | --description d Adds a textual description to billing codes.\n"
"\n"
"  -l | --list          List informations about the billing codes.\n"
"\n"
"  -r | --reset         Resets the billing codes' balance and page counters\n"
"                       to 0.\n"
"\n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkbcodes to not modify existing billing codes.\n"
"\n"
"  code1 through codeN can contain wildcards if the --add option\n"
"  is not set.\n"
"\n"
"examples :                              \n"
"\n"
"  $ pkbcodes --add -D \"My project\" myproj\n"
"\n"
"  Will create the myproj billing code with \"My project\"\n"
"  as the description.\n"
"\n"
"  $ pkbcodes --delete \"*\"\n"
"\n"
"  This will completely delete all the billing codes, but without\n"
"  removing any matching job from the history. USE WITH CARE ANYWAY !\n"
"  \n"
"  $ pkbcodes --list \"my*\"\n"
"  \n"
"  This will list all billing codes which name begins with 'my'.\n"
msgstr ""

#, python-format
msgid "Billing code [%s] already exists, skipping."
msgstr ""

#, python-format
msgid "Billing code [%s] already exists, will be modified."
msgstr ""

#, python-format
msgid "Impossible to add billingcode %s"
msgstr ""

#, python-format
msgid "There's no billingcode matching %s"
msgstr ""

msgid "pages"
msgstr ""

msgid "and"
msgstr ""

msgid "credits"
msgstr ""

msgid "You have to pass billing codes on the command line"
msgstr ""

#, python-format
msgid ""
"pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Email gateway for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkmail  [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkmail's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"    \n"
"  This command is meant to be used from your mail server's aliases file,\n"
"  as a pipe. It will then accept commands send to it in email messages,\n"
"  and will send the answer to the command's originator.\n"
"  \n"
"  To use this command, create an email alias in /etc/aliases with\n"
"  the following format :\n"
"  \n"
"    pykotacmd: \"|/usr/bin/pkmail\"\n"
"    \n"
"  Then run the 'newaliases' command to regenerate the aliases database.\n"
"  \n"
"  You can now send commands by email to 'pykotacmd@yourdomain.com', with\n"
"  the command in the subject.\n"
"  \n"
"  List of supported commands :\n"
"  \n"
"        report [username]\n"
"  \n"
"  NB : For pkmail to work correctly, you may have to put the 'mail'\n"
"  system user in the 'pykota' system group to ensure this user can\n"
"  read the /etc/pykota/pykotadmin.conf file, and restart your\n"
"  mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n"
"  that you think at least twice before doing this though.\n"
"  \n"
"  Use at your own risk !\n"
msgstr ""

#, python-format
msgid ""
"pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A Printers Manager for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkprinters's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -a | --add           Adds printers if they don't exist on the Quota \n"
"                       Storage Server. If they exist, they are modified\n"
"                       unless -s|--skipexisting is also used.\n"
"                       \n"
"  -d | --delete        Deletes printers from the quota storage.\n"
"  \n"
"  -D | --description d Adds a textual description to printers.\n"
"                       \n"
"  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
"                       Job price is optional.\n"
"                       If both are to be set, separate them with a comma.\n"
"                       Floating point and negative values are allowed.\n"
"  \n"
"  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n"
"                       groups pg1, pg2, etc... which must already exist.\n"
"                       A printer group is just like a normal printer,\n"
"                       only that it is usually unknown from the printing\n"
"                       system. Create printer groups exactly the same\n"
"                       way that you create printers, then add other \n"
"                       printers to them with this option.\n"
"                       Accounting is done on a printer and on all\n"
"                       the printer groups it belongs to, quota checking\n"
"                       is done on a printer and on all the printer groups\n"
"                       it belongs to.\n"
"                       If the --remove option below is not used, the \n"
"                       default action is to add printers to the specified\n"
"                       printer groups.\n"
"                       \n"
"  -l | --list          List informations about the printer(s) and the\n"
"                       printers groups it is a member of.\n"
"                       \n"
"  -r | --remove        In combination with the --groups option "
"above,                       \n"
"                       remove printers from the specified printers groups.\n"
"                       \n"
"  -s | --skipexisting  In combination with the --add option above, tells\n"
"                       pkprinters to not modify existing printers.\n"
"                       \n"
"  -m | --maxjobsize s  Sets the maximum job size allowed on the printer\n"
"                       to s pages.\n"
"                       \n"
"  -p | --passthrough   Activate passthrough mode for the printer. In this\n"
"                       mode, users are allowed to print without any impact\n"
"                       on their quota or account balance.\n"
"                       \n"
"  -n | --nopassthrough Deactivate passthrough mode for the printer.\n"
"                       Without -p or -n, printers are created in \n"
"                       normal mode, i.e. no passthrough.\n"
"  \n"
"  printer1 through printerN can contain wildcards if the --add option \n"
"  is not set.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
"hp8000\n"
"  \n"
"  Will create three printers named hp2100, hp2200 and hp8000.\n"
"  Their price per page will be set at 0.05 unit, and their price\n"
"  per job will be set at 0.1 unit. Units are in your own currency,\n"
"  or whatever you want them to mean.\n"
"  All of their descriptions will be set to the string \"HP Printer\".\n"
"  If any of these printers already exists, it will also be modified \n"
"  unless the -s|--skipexisting command line option is also used.\n"
"            \n"
"  $ pkprinters --delete \"*\"\n"
"  \n"
"  This will completely delete all printers and associated quota "
"information,\n"
"  as well as their job history. USE WITH CARE !\n"
"  \n"
"  $ pkprinters --groups Laser,HP \"hp*\"\n"
"  \n"
"  This will put all printers which name matches \"hp*\" into printers "
"groups \n"
"  Laser and HP, which MUST already exist.\n"
"  \n"
"  $ pkprinters --groups LexMark --remove hp2200\n"
"  \n"
"  This will remove the hp2200 printer from the LexMark printer group.\n"
msgstr ""

#, python-format
msgid "Invalid maximum job size value %s"
msgstr ""

#, python-format
msgid "Printer %s already exists, skipping."
msgstr "Drucker %s existiert bereits, wird �rungen"

#, python-format
msgid "Printer %s already exists, will be modified."
msgstr "Drucker %s existiert bereits, wird modifiziert."

msgid "in"
msgstr "in"

#, python-format
msgid "Passthrough mode : %s"
msgstr ""

msgid "ON"
msgstr ""

msgid "OFF"
msgstr ""

#, python-format
msgid "Maximum job size : %s"
msgstr ""

#, python-format
msgid "%s pages"
msgstr ""

msgid "Unlimited"
msgstr ""

msgid "You have to pass printer groups names on the command line"
msgstr ""
"Sie m�die Namen der Druckergruppen auf der Kommandozeile �ben"

msgid "You have to pass printer names on the command line"
msgstr "Sie m�Druckernamen auf der Kommandozeile �ben"

#, python-format
msgid ""
"pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"A turn key tool for PyKota. When launched, this command will initialize\n"
"PyKota's database with all existing print queues and some or all users.\n"
"For now, no prices or limits are set, so printing is fully accounted\n"
"for, but not limited. That's why you'll probably want to also use\n"
"edpykota once the database has been initialized.\n"
"\n"
"command line usage :\n"
"\n"
"  pkturnkey [options] [printqueues names]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pkturnkey version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --doconf        Give hints about what to put into pykota.conf\n"
"  \n"
"  -d | --dousers       Manages users accounts as well.\n"
"  \n"
"  -D | --dogroups      Manages users groups as well.\n"
"                       Implies -d | --dousers.\n"
"  \n"
"  -e | --emptygroups   Includes empty groups.\n"
"  \n"
"  -f | --force         Modifies the database instead of printing what\n"
"                       it would do.\n"
"                       \n"
"  -u | --uidmin uid    Only adds users whose uid is greater than or equal "
"to\n"
"                       uid. You can pass an username there as well, and its\n"
"                       uid will be used automatically.\n"
"                       If not set, 0 will be used automatically.\n"
"                       Implies -d | --dousers.\n"
"                       \n"
"  -U | --uidmax uid    Only adds users whose uid is lesser than or equal to\n"
"                       uid. You can pass an username there as well, and its\n"
"                       uid will be used automatically.\n"
"                       If not set, a large value will be used "
"automatically.\n"
"                       Implies -d | --dousers.\n"
"\n"
"  -g | --gidmin gid    Only adds groups whose gid is greater than or equal "
"to\n"
"                       gid. You can pass a groupname there as well, and its\n"
"                       gid will be used automatically.\n"
"                       If not set, 0 will be used automatically.\n"
"                       Implies -D | --dogroups.\n"
"                       \n"
"  -G | --gidmax gid    Only adds groups whose gid is lesser than or equal "
"to\n"
"                       gid. You can pass a groupname there as well, and its\n"
"                       gid will be used automatically.\n"
"                       If not set, a large value will be used "
"automatically.\n"
"                       Implies -D | --dogroups.\n"
"\n"
"examples :                              \n"
"\n"
"  $ pkturnkey --dousers --uidmin jerome\n"
"\n"
"  Will simulate the initialization of PyKota's database will all existing\n"
"  printers and print accounts for all users whose uid is greater than\n"
"  or equal to jerome's one. Won't manage any users group.\n"
"  \n"
"  To REALLY initialize the database instead of simulating it, please\n"
"  use the -f | --force command line switch.\n"
"  \n"
"  You can limit the initialization to only a subset of the existing\n"
"  printers, by passing their names at the end of the command line.\n"
msgstr ""

#, python-format
msgid ""
"Printer %s is not managed by PyKota yet. Please modify printers.conf and "
"restart CUPS."
msgstr ""

msgid "Please be patient..."
msgstr ""

msgid "Don't worry, the database WILL NOT BE MODIFIED."
msgstr ""

msgid "Please WORRY NOW, the database WILL BE MODIFIED."
msgstr ""

msgid "System users will have a print account as well !"
msgstr ""

#, python-format
msgid "Unknown username %s : %s"
msgstr ""

msgid "System groups will have a print account as well !"
msgstr ""

#, python-format
msgid "Unknown groupname %s : %s"
msgstr ""

msgid "Simulation terminated."
msgstr ""

msgid "Database initialized !"
msgstr ""

msgid "The --uidmin or --uidmax command line option implies --dousers as well."
msgstr ""

msgid ""
"The --gidmin or --gidmax command line option implies --dogroups as well."
msgstr ""

msgid "The --dogroups command line option implies --dousers as well."
msgstr ""

#, python-format
msgid ""
"pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"An OSD quota monitor for PyKota.\n"
"\n"
"command line usage :\n"
"\n"
"  pykosd [options]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykosd's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n"
"                       triplet, for example #FF0000 is 100%% red.\n"
"                       Defaults to 100%% green (#00FF00).\n"
"                       \n"
"  -d | --duration d    Sets the duration of the display in seconds. \n"
"                       Defaults to 3 seconds.\n"
"                       \n"
"  -f | --font f        Sets the font to use for "
"display.                      \n"
"                       Defaults to the Python OSD library's default.\n"
"  \n"
"  -l | --loop n        Sets the number of times the info will be displayed.\n"
"                       Defaults to 0, which means loop forever.\n"
"                       \n"
"  -s | --sleep s       Sets the sleeping duration between two displays \n"
"                       in seconds. Defaults to 180 seconds (3 minutes).\n"
"                       \n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykosd -s 60 --loop 5\n"
"  \n"
"  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
"  and will last for 3 seconds (the default) each time. After five\n"
"  iterations, the program will exit.\n"
msgstr ""

#, python-format
msgid "Invalid duration option %s"
msgstr "Ung� Option duration %s"

#, python-format
msgid "Invalid loop option %s"
msgstr "Ung� Option loop %s"

#, python-format
msgid "Invalid sleep option %s"
msgstr "Ung� Option sleep %s"

#, python-format
msgid "Invalid color option %s"
msgstr "Ung� Option color %s"

#, python-format
msgid "User %s doesn't exist in PyKota's database"
msgstr "Benutzer %s existiert nicht in der PyKota-Datenbank"

#, python-format
msgid "Pages used on %s : %s"
msgstr "Seiten benutzt f� %s"

#, python-format
msgid "PyKota Units left : %.2f"
msgstr "Verbleibende PyKota-Einheiten: %.2f"

#, python-format
msgid ""
"pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n"
"\n"
"Gives print quotes to users.\n"
"\n"
"command line usage :\n"
"\n"
"  pykotme  [options]  [files]\n"
"\n"
"options :\n"
"\n"
"  -v | --version       Prints pykotme's version number then exits.\n"
"  -h | --help          Prints this message then exits.\n"
"  \n"
"  -P | --printer p     Gives a quote for this printer only. Actually p can\n"
"                       use wildcards characters to select only\n"
"                       some printers. The default value is *, meaning\n"
"                       all printers.\n"
"                       You can specify several names or wildcards, \n"
"                       by separating them with commas.\n"
"  \n"
"examples :                              \n"
"\n"
"  $ pykotme --printer apple file1.ps file2.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps and file2.ps \n"
"  which would be sent to the apple printer.\n"
"  \n"
"  $ pykotme --printer apple,hplaser <file1.ps\n"
"  \n"
"  This will give a print quote to the current user. The quote will show\n"
"  the price and size of a job consisting in file1.ps as read from\n"
"  standard input, which would be sent to the apple or hplaser\n"
"  printer.\n"
"\n"
"  $ pykotme \n"
"  \n"
"  This will give a quote for a job consisting of what is on standard \n"
"  input. The quote will list the job size, and the price the job\n"
"  would cost on each printer.\n"
msgstr ""

#, python-format
msgid "Your account balance : %.2f"
msgstr "Ihr Kontostand: %.2f"

#, python-format
msgid "Job size : %i pages"
msgstr "Auftragsgr� %i Seiten"

#, python-format
msgid "Cost on printer %s : %.2f"
msgstr "Kosten f�cker %s : %.2f"

msgid "PyKota Data Dumper"
msgstr ""

msgid "Dump"
msgstr ""

msgid "Please click on the above button"
msgstr "Bitte dr�Sie den obigen Knopf"

msgid "Data Type"
msgstr ""

msgid "Output Format"
msgstr ""

msgid "Filter"
msgstr ""

msgid "Summarize"
msgstr ""

msgid "only for payments or history"
msgstr ""

msgid "PyKota Reports"
msgstr "PyKota Reporte"

msgid "Report"
msgstr "Report"

msgid "Printer"
msgstr "Drucker"

msgid "User / Group names mask"
msgstr "Benutzer- / Gruppenname-Maske"

msgid "Groups report"
msgstr "Gruppen Report"

msgid "History"
msgstr "Verlauf"

msgid "Empty"
msgstr "Leer"

msgid "Action"
msgstr "Aktion"

msgid "User"
msgstr "Benutzer"

msgid "Hostname"
msgstr "Hostname"

msgid "JobId"
msgstr "AuftragsId"

msgid "Number of pages"
msgstr ""

msgid "Cost"
msgstr ""

msgid "Copies"
msgstr "Kopien"

msgid "Number of bytes"
msgstr ""

msgid "Printer's internal counter"
msgstr ""

msgid "Options"
msgstr "Optionen"

msgid "MD5Sum"
msgstr ""

msgid "Billing code"
msgstr ""

msgid "Precomputed number of pages"
msgstr ""

msgid "Precomputed cost"
msgstr ""

msgid "Pages details"
msgstr ""

msgid "(not supported yet)"
msgstr ""

msgid "Previous page"
msgstr "Vorherige Seite"

msgid "PyKota Quotes"
msgstr ""

msgid "Quote"
msgstr ""

msgid ""
"The exact cost of a print job can only be determined for a particular user. "
"Please retry while logged-in."
msgstr ""

#, python-format
msgid "Unsupported accounter backend %s"
msgstr "Accounterbackend %s wird nicht unterst�#, python-format
msgid ""
"Configuration file %s can't be read. Please check that the file exists and "
"that your permissions are sufficient."
msgstr ""

#, python-format
msgid "Configuration file %s not found."
msgstr "Konfigurationsdatei %s nicht gefunden."

#, python-format
msgid "Option %s not found in section global of %s"
msgstr "Option %s im globalen Abschnitt von %s nicht gefunden"

#, python-format
msgid "Option %s not found in section %s of %s"
msgstr "Option %s in Abschnitt %s von %s nicht gfunden"

#, python-format
msgid "Option ldaptls is set, but certificate %s is not readable."
msgstr ""

#, python-format
msgid "Option logger only supports values in %s"
msgstr "Option logger unterst�ur folgende Werte %s"

#, python-format
msgid "Invalid accounter %s for printer %s"
msgstr "Ung�r Accounter %s f�cker %s "

#, python-format
msgid "Option accounter in section %s only supports values in %s"
msgstr "Option 'accounter' in Abschnitt %s unterst�ur folgende Werte %s"

#, python-format
msgid "Invalid unknown_billingcode directive %s for printer %s"
msgstr ""

#, python-format
msgid "Directive unknown_billingcode in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option enforcement in section %s only supports values in %s"
msgstr "Option 'enforcement' in Abschnitt %s unterst�ur folgende Werte %s"

#, python-format
msgid "Option onaccountererror in section %s only supports values in %s"
msgstr ""
"Option 'onaccountererror' in Abschnitt %s unterst�ur folgende Werte %s"

#, python-format
msgid "Option policy in section %s only supports values in %s"
msgstr "Option 'policy' in Abschnitt %s unterst�ur folgende Werte %s"

#, python-format
msgid "Invalid option mailto %s for printer %s"
msgstr "Ung� Option 'mailto' %s f�cker %s"

#, python-format
msgid "Option mailto in section %s only supports values in %s"
msgstr "Option 'mailto' in Abschnitt %s unterst�ur folgende Werte %s"

#, python-format
msgid "Invalid maximal deny banners counter %s"
msgstr ""

#, python-format
msgid "Invalid grace delay %s"
msgstr "Ung� Schongrenze %s"

#, python-format
msgid "Invalid poor man's threshold %s"
msgstr "Ung� 'poorman' Grenze %s"

msgid ""
"Your Print Quota account balance is Low.\n"
"Soon you'll not be allowed to print anymore.\n"
"Please contact the Print Quota Administrator to solve the problem."
msgstr ""
"Ihr Druckkontingent-Kontostand ist niedrig.\n"
"Bald wird es Ihnen nicht mehr gestattet sein zu drucken.\n"
"Bitte kontaktieren Sie den Druckkontingent-Administrator,\n"
"um dieses Problem zu l�."

#, python-format
msgid ""
"You are not allowed to print anymore because\n"
"your Print Quota is exceeded on printer %s."
msgstr ""
"Es ist ihnen nicht gestattet weiterhin zu drucken, weil \n"
"ihr Druckkontingent auf Drucker %s �gen ist."

#, python-format
msgid ""
"You will soon be forbidden to print anymore because\n"
"your Print Quota is almost reached on printer %s."
msgstr ""
"Bald wird es ihnen verboten sein zu Drucken, weil \n"
"ihr Druckkontingent auf Drucker %s fast aufgebraucht ist."

#, python-format
msgid "Option accountbanner in section %s only supports values in %s"
msgstr ""

#, python-format
msgid "Option trustjobsize for printer %s is incorrect"
msgstr ""

msgid "Users"
msgstr ""

msgid "Groups"
msgstr ""

msgid "Printers"
msgstr ""

msgid "Users Print Quotas"
msgstr ""

msgid "Users Groups Print Quotas"
msgstr ""

msgid "History of Payments"
msgstr ""

msgid "Printers Groups Membership"
msgstr ""

msgid "Users Groups Membership"
msgstr ""

msgid "Billing Codes"
msgstr ""

msgid "Comma Separated Values"
msgstr ""

msgid "Semicolon Separated Values"
msgstr ""

msgid "Tabulation Separated Values"
msgstr ""

msgid "eXtensible Markup Language"
msgstr ""

msgid "CUPS' page_log"
msgstr ""

#, python-format
msgid "Invalid filter value [%s], see help."
msgstr ""

#, python-format
msgid "Invalid modifier [%s] for --data command line option, see help."
msgstr ""
"Ung� Einstellung [%s] f�mandozeilenoption --data, siehe Hilfe."

#, python-format
msgid "Invalid modifier [%s] for --format command line option, see help."
msgstr ""
"Ung�e Einstellung [%s] f�mandozeilenoption --format, siehe Hilfe."

msgid "XML output is disabled because the jaxml module is not available."
msgstr "XML-Ausgabe ist unm�ch, weil das jaxml-Modul nicht verf�ist."

#, python-format
msgid "Invalid data type [%s] for --sum command line option, see help."
msgstr ""

msgid "PyKota data dumper failed : I/O error"
msgstr "PyKota data dumper fehlgeschlagen: I/O-Fehler"

#, python-format
msgid "Unsupported logging subsystem %s"
msgstr "Nicht unterst� logging subsystem %s"

#, python-format
msgid "Report for %s quota on printer %s"
msgstr "Report f�Kontingent auf Drucker %s"

#, python-format
msgid "Pages grace time: %i days"
msgstr "Schonfrist: %i Tage"

#, python-format
msgid "Price per job: %.3f"
msgstr "Preis pro Auftrag: %.3f"

#, python-format
msgid "Price per page: %.3f"
msgstr "Preis pro Seite: %.3f"

msgid ""
"Group          overcharge   used    soft    hard    balance grace         "
"total       paid warn"
msgstr ""

msgid ""
"User           overcharge   used    soft    hard    balance grace         "
"total       paid warn"
msgstr ""

msgid "unknown"
msgstr "unbekannt"

#, python-format
msgid "Real : %s"
msgstr "Real : %s"

#, python-format
msgid "Total : %9i"
msgstr "Gesamt : %9i"

msgid "N/A"
msgstr ""

#, python-format
msgid "Unsupported reporter backend %s"
msgstr "Nicht unterst� Report-Backend %s"

#, python-format
msgid "Unsupported quota storage backend %s"
msgstr "Nicht unterst� Kontingentspeicherungsbackend (quota storage) %s"

#, python-format
msgid "Strange problem with uid(%s) : %s"
msgstr ""

#, python-format
msgid "Running as user '%s'."
msgstr ""

msgid "No user named 'pykota'. Not dropping priviledges."
msgstr ""

#, python-format
msgid "Impossible to drop priviledges : %s"
msgstr ""

msgid "Priviledges dropped. Now running as user 'pykota'."
msgstr ""

#, python-format
msgid "Impossible to regain priviledges : %s"
msgstr ""

msgid "Regained priviledges. Now running as root."
msgstr ""

msgid "Please report bugs to :"
msgstr ""

#, python-format
msgid ""
"\n"
"\n"
"Please contact your system administrator :\n"
"\n"
"\t%s - <%s>\n"
msgstr ""
"\n"
"\n"
"Bitte kontakieren Sie Ihren Systemadministrator:\n"
"\n"
"\t%s - <%s>\n"

#, python-format
msgid "Unable to match user %s on printer %s, applying default policy (%s)"
msgstr ""
"Keine �ereinstimmung f�utzer %s auf Drucker %s vorhanden, wende "
"Standard-Richtlinie an (%s)"

#, python-format
msgid ""
"Unable to find user %s's account balance, applying default policy (%s) for "
"printer %s"
msgstr ""
"Keine �ereinstimmung f� Kontostand von Benutzer %s,\n"
"wende Standard-Richtlinie (%s) f�cker %s an"

#, python-format
msgid "User %s will not be charged for printing."
msgstr ""

#, python-format
msgid "Print Quota exceeded for group %s on printer %s"
msgstr "�erzogenes Druckkontingent f�ppe %s auf Drucker %s"

msgid "Print Quota Exceeded"
msgstr "�erzogenes Druckkontingent"

#, python-format
msgid "Print Quota low for group %s on printer %s"
msgstr "Niedriges Druckkontingent f�ppe %s auf Drucker %s"

msgid "Print Quota Low"
msgstr "Niedriges Druckkontingent"

#, python-format
msgid "A problem occured while reading printer %s's internal page counter."
msgstr ""
"Ein Problem trat w�dend des Auslesens des internen Seitenz�ers von "
"Drucker %s auf."

#, python-format
msgid "Retrieving printer %s's page counter from database instead."
msgstr ""
"Seitenz�er f�cker %s wird anstelle dessen aus der Datenbank genommen."

#, python-format
msgid ""
"Couldn't retrieve printer %s's internal page counter either before or after "
"printing."
msgstr ""
"Es war unm�ch, den internen Seitenz�er von Drucker %s vor oder nach dem "
"Drucken zu lesen."

#, python-format
msgid "Job's size forced to 1 page for printer %s."
msgstr "Auftragsgr�f�cker %s auf 1 Seite festgelegt."

#, python-format
msgid "No previous job in database for printer %s."
msgstr "Kein fr� Auftrag f�cker %s in der Datenbank"

#, python-format
msgid "Inconsistent values for printer %s's internal page counter."
msgstr "Inkonsistente Werte f� internen Seitenz�er von Drucker %s"

#, python-format
msgid "Unknown printer address in HARDWARE(%s) for printer %s"
msgstr "Unbekannte Drucker Adresse in HARDWARE(%s) f�cker %s"

#, python-format
msgid "Launching HARDWARE(%s)..."
msgstr "Starte HARDWARE(%s)..."

#, python-format
msgid "SIGTERM was sent to hardware accounter %s (pid: %s)"
msgstr "SIGTERM wurde an Hardware Accounter %s (pid: %s) gesendet"

#, python-format
msgid "Line [%s] skipped in accounter's output. Trying again..."
msgstr ""
"Linie [%s] in der Ausgabe des Z�ers �rungen. Erneuter Versuch..."

#, python-format
msgid "Hardware accounter %s exit code is %s"
msgstr "Der Exit-Code des Hardwarez�ers %s ist %s"

#, python-format
msgid "Unable to query printer %s via HARDWARE(%s)"
msgstr "Unm�ch Drucker %s via HARDWARE(%s) abzufragen"

#, python-format
msgid "Problem during connection to %s:%s : %s"
msgstr "Problem w�end der Verbindung zu %s:%s : %s"

#, python-format
msgid "Problem while sending PJL query to %s:%s : %s"
msgstr "Probleme w�end des Sendens der PJL-Abfrage an %s:%s :%s"

#, python-format
msgid "Problem while receiving PJL answer from %s:%s : %s"
msgstr ""

#, python-format
msgid "Waiting for printer %s to be printing..."
msgstr ""

#, python-format
msgid "Waiting for printer %s's idle status to stabilize..."
msgstr "Am Warten darauf, dass der idle-Status von Drucker %s stabil wird..."

#, python-format
msgid ""
"PJL querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""
"PJL-Abfrage-Status unterbrochen. Es wird der letzte bekannte Wert des "
"internen Seitenz�er (%s) von Drucker %s verwendet."

#, python-format
msgid "Network error while doing SNMP queries on printer %s : %s"
msgstr "Netzwerk-Fehler w�end SNMP-Abfragen auf Drucker %s: %s"

#, python-format
msgid "SNMP message decoding error for printer %s : %s"
msgstr ""

#, python-format
msgid "Problem encountered while doing SNMP queries on printer %s : %s"
msgstr ""
"Es sind Probleme w�end den SNMP-Abfragen auf Drucker %s aufgetreten: %s"

#, python-format
msgid ""
"SNMP querying stage interrupted. Using latest value seen for internal page "
"counter (%s) on printer %s."
msgstr ""
"SNMP-Abfrage-Status unterbrochen. Es wird der letzte bekannte Wert des "
"internen Seitenz�ers (%s) von Drucker %s verwendet."

#, python-format
msgid "Launching SOFTWARE(%s)..."
msgstr "Starte SOFTWARE(%s)..."

#, python-format
msgid "Unable to compute job size with accounter %s"
msgstr "Es ist unm�ch, die Auftragsgr�mit Accounter %s zu berechnen"

#, python-format
msgid "Problem while waiting for software accounter pid %s to exit : %s"
msgstr ""
"Probleme beim Warten auf das Beenden des Software-Accounters pid %s: %s"

#, python-format
msgid "Software accounter %s exit code is %s"
msgstr "Der Exit-Code des Software-Accounters %s ist %s"

msgid "Totals may be inaccurate if some users are members of several groups."
msgstr ""
"Gesamtsummen sind m�cherweise ungenau, falles einige Benutzer Mitglieder "
"von mehreren Gruppen sind."

#, python-format
msgid ""
"Search base %s doesn't seem to exist. Probable misconfiguration. Please "
"double check /etc/pykota/pykota.conf : %s"
msgstr ""
"Suchbasis %s scheint nicht zu existieren. M�herweise falsche "
"Konfiguration. Bitte /etc/pykota/pykota.conf ��%s"

#, python-format
msgid "Search for %s(%s) from %s(scope=%s) returned no answer."
msgstr "Suche nach %s(%s) aus %s(scope=%s) ergab kein Antwort."

#, python-format
msgid "Problem adding LDAP entry (%s, %s)"
msgstr "Problem, den LDAP-Eintrag (%s, %s) hinzuzuf�
#, python-format
msgid "Problem deleting LDAP entry (%s)"
msgstr "Problem LDAP Eintrag (%s) zu l�en"

#, python-format
msgid "Problem modifying LDAP entry (%s, %s)"
msgstr "Problem LDAP Eintrag (%s, %s) zu modifizieren"

#, python-format
msgid ""
"No pykotaAccountBalance object found for user %s. Did you create LDAP "
"entries manually ?"
msgstr ""
"Kein Objekt pykotaAccountBalance f�utzer %s gefunden. Haben Sie die "
"LDAP-Eintr� manuell erzeugt?"

msgid "Hidden because of privacy concerns"
msgstr ""

#, python-format
msgid ""
"Unable to find an existing objectClass %s entry with %s=%s to attach "
"pykotaAccount objectClass"
msgstr ""
"Unm�ch einen existierenden objectClass-Entrag %s mit %s=%s zu finden, um "
"objectClass pykotaAccount anzuf�
#, python-format
msgid "%s. A new entry will be created instead."
msgstr ""

#, python-format
msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s"
msgstr ""
"Unm�ch einen existierenden Eintrag zu finden, um pykotaGroup objectClass %"
"s anzuf�
msgid "ALLOW"
msgstr ""

msgid "WARN"
msgstr ""

msgid "DENY"
msgstr ""

msgid "won't be charged, printer is in passthrough mode"
msgstr ""

msgid "won't be charged, your account is immutable"
msgstr ""

msgid "Printing denied."
msgstr ""

msgid "Printing not limited."
msgstr ""

msgid "Printing not limited, no accounting."
msgstr ""

msgid "No Accounting"
msgstr ""

msgid "No Limit"
msgstr ""

msgid "Forbidden"
msgstr ""

msgid "Printing Mode"
msgstr ""

#~ msgid "File number %s unregistered twice from polling object, ignored."
#~ msgstr ""
#~ "Datei Nummer %s zweimal vom Abfrage Objekt abgemeldet, wird ignoriert."

#~ msgid "SIGTERM was sent to real backend %s (pid: %s)"
#~ msgstr "SIGTERM wurde an reales Backend %s (pid: %s) gesendet"

#~ msgid "CUPS backend %s died abnormally."
#~ msgstr "CUPS Backend %s abgest�

#~ msgid "Software accounting already done in first pass. Ignoring."
#~ msgstr ""
#~ "Software Kontof� bereits im ersten Durchgang erledigt. Wird "
#~ "ignoriert."

#~ msgid "Hardware accounting already done in first pass. Ignoring."
#~ msgstr ""
#~ "Hardware Kontof� bereits im ersten Durchgang erledigt. Ignoriere."

#~ msgid "Invalid DeviceURI : %s"
#~ msgstr "Ung� DeviceURI: %s"

#~ msgid ""
#~ "\n"
#~ "Please wait while pkhint analyzes your printing system's configuration..."
#~ msgstr ""
#~ "\n"
#~ "Bitte warten Sie w�end pkhint die Konfiguration ihres Drucksystems "
#~ "analysiert..."

#~ msgid "Unknown device %s for printer %s"
#~ msgstr "Unbekannter Anschluss %s f�cker %s"

#~ msgid ""
#~ "\n"
#~ "Put the following lines into your /etc/pykota/pykota.conf file :\n"
#~ msgstr ""
#~ "\n"
#~ "F�ie folgende Zeilen in ihre /etc/pykota/pykota.conf Datei ein:\n"

#~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean"
#~ msgstr ""
#~ "# ACHTUNG: wenn Software Accounting vorgeschlagen wird, bedeutet dies "
#~ "nicht,"

#~ msgid ""
#~ "# that hardware accounting wouldn't work, this only means that PyKota"
#~ msgstr ""
#~ " dass Hardware Accounting nicht funktionieren w�es bedeutet nur, "
#~ "dass PyKota"

#~ msgid "# wasn't able to autodetect which hardware accounting method to use."
#~ msgstr ""
#~ " nicht in der Lage war, automatisch festzustellen, welche Hardware "
#~ "Accounting Methode zu benutzen ist."

#~ msgid "JobSize"
#~ msgstr "AuftragsGr�

#~ msgid "JobPrice"
#~ msgstr "AuftragsPreis"

#~ msgid "JobBytes"
#~ msgstr "Auftrag in Bytes"

#~ msgid "PageCounter"
#~ msgstr "SeitenZ�er"

#~ msgid "Printing system %s, args=%s"
#~ msgstr "Drucksystem %s, args=%s"

#~ msgid "Printer hostname undefined, set to 'localhost'"
#~ msgstr "Hostname des Druckers nicht definiert, setze auf 'localhost'"

#~ msgid "Printing system unknown, args=%s"
#~ msgstr "Drucksystem unbekannt, args=%s"

#~ msgid ""
#~ "autopykota v%s (c) %s %s\n"
#~ "\n"
#~ "A tool to automate user account creation and initial balance setting.\n"
#~ "\n"
#~ "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE "
#~ "QUOTA !\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n"
#~ "  OF AN external policy IN pykota.conf\n"
#~ "  \n"
#~ "  autopykota { -i | --initbalance value } \n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints autopykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -i | --initbalance b Sets the user's account initial balance value to "
#~ "b.\n"
#~ "                       If the user already exists, actual balance is "
#~ "left\n"
#~ "                       unmodified. If unset, the default value is 0.\n"
#~ "                       \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "autopykota v%s (c) %s %s\n"
#~ "\n"
#~ "Ein Programm zum automatischen Anlegen von Benutzer-Konti\n"
#~ "und zum Setzen von Anfangswerten\n"
#~ "\n"
#~ "SIE D�FEN NICHT DIESES PROGRAMM VERWENDEN,\n"
#~ "WENN SIE DIE KONTINGENTE F� IHRE BENUTZER AUF DER BASIS VON SEITENZAHLEN "
#~ "SETZEN WOLLEN!\n"
#~ "\n"
#~ "Gebrauch auf der Kommandozeile:\n"
#~ "\n"
#~ "  SIE D�FEN DIESES PROGRAMM NICHT AUF DER KOMMANDOZEILE BENUTZEN, "
#~ "SONDERN\n"
#~ "  NUR ALS ALS external policy IN pykota.conf\n"
#~ "\n"
#~ "  autopykota { -i | --initbalance value }\n"
#~ "  \n"
#~ "Optionen:\n"
#~ "\n"
#~ "  -v | --version       Gibt die Version von autopykota aus und endet.\n"
#~ "  -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "  \n"
#~ "  -i | --initbalance b Setzt den Anfangswert der Balance des "
#~ "Benutzerkontos auf b.\n"
#~ "                       Wenn der Benutzer schon existiert, wird der "
#~ "aktuelle Balance-Wert\n"
#~ "                       unver�ert gelassen. Wenn er nicht gesetzt wird,\n"
#~ "                       ist der Standardwert 0.\n"
#~ "                       \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "pkhint v%s (c) %s %s\n"
#~ "\n"
#~ "A tool to give hints on what accounting method is best for each printer.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pkhint [options] [printer1 printer2 printer3 ... printerN] <file.conf\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pkhint's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
#~ "  \n"
#~ "  Will analyze your printing system to test which accounter\n"
#~ "  is the best for each of the defined printer which\n"
#~ "  name matches one of the parameters.\n"
#~ "  \n"
#~ "  If you don't pass any argument on the command line, all\n"
#~ "  printers will be analyzed.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pkhint v%s (c) %s %s\n"
#~ "\n"
#~ "Ein Werkzeug, das Hinweise auf die beste Z�methode f�en Drucker "
#~ "gibt.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  pkhint [Optionen] [Drucker1 Drucker2 Drucker3 ... DruckerN] <file.conf\n"
#~ "\n"
#~ "Optionen:\n"
#~ "\n"
#~ "  -v | --version       Gibt die Versionsnummer von pkhint aus und endet.\n"
#~ "  -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ pkhint \"hp*\" printer103 </etc/cups/printers.conf\n"
#~ "\n"
#~ "  Analysiert Ihr Drucksystem um festzustellen, welcher Z�er\n"
#~ "  der geeignetste ist f�en der angegebenen Drucker, dessen\n"
#~ "  Name zu einem der Parameter passt.\n"
#~ "\n"
#~ "  Wenn Sie keinen Parameter auf der Kommandozeile �ben,\n"
#~ "  werden alle Drucker analysiert.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "pkprinters v%s (c) %s %s\n"
#~ "\n"
#~ "A Printers Manager for PyKota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pkprinters [options] printer1 printer2 printer3 ... printerN\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pkprinters's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -a | --add           Adds printers if they don't exist on the Quota \n"
#~ "                       Storage Server. If they exist, they are modified\n"
#~ "                       unless -s|--skipexisting is also used.\n"
#~ "                       \n"
#~ "  -d | --delete        Deletes printers from the quota storage.\n"
#~ "  \n"
#~ "  -D | --description d Adds a textual description to printers.\n"
#~ "                       \n"
#~ "  -c | --charge p[,j]  Sets the price per page and per job to charge.\n"
#~ "                       Job price is optional.\n"
#~ "                       If both are to be set, separate them with a "
#~ "comma.\n"
#~ "                       Floating point and negative values are allowed.\n"
#~ "  \n"
#~ "  -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the "
#~ "printer \n"
#~ "                       groups pg1, pg2, etc... which must already exist.\n"
#~ "                       A printer group is just like a normal printer,\n"
#~ "                       only that it is usually unknown from the printing\n"
#~ "                       system. Create printer groups exactly the same\n"
#~ "                       way that you create printers, then add other \n"
#~ "                       printers to them with this option.\n"
#~ "                       Accounting is done on a printer and on all\n"
#~ "                       the printer groups it belongs to, quota checking\n"
#~ "                       is done on a printer and on all the printer "
#~ "groups\n"
#~ "                       it belongs to.\n"
#~ "                       If the --remove option below is not used, the \n"
#~ "                       default action is to add printers to the "
#~ "specified\n"
#~ "                       printer groups.\n"
#~ "                       \n"
#~ "  -l | --list          List informations about the printer(s) and the\n"
#~ "                       printers groups it is a member of.\n"
#~ "                       \n"
#~ "  -r | --remove        In combination with the --groups option "
#~ "above,                       \n"
#~ "                       remove printers from the specified printers "
#~ "groups.\n"
#~ "                       \n"
#~ "  -s | --skipexisting  In combination with the --add option above, tells\n"
#~ "                       pkprinters to not modify existing printers.\n"
#~ "  \n"
#~ "  printer1 through printerN can contain wildcards if the --add option \n"
#~ "  is not set.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
#~ "hp8000\n"
#~ "  \n"
#~ "  Will create three printers named hp2100, hp2200 and hp8000.\n"
#~ "  Their price per page will be set at 0.05 unit, and their price\n"
#~ "  per job will be set at 0.1 unit. Units are in your own currency,\n"
#~ "  or whatever you want them to mean.\n"
#~ "  All of their descriptions will be set to the string \"HP Printer\".\n"
#~ "  If any of these printers already exists, it will also be modified \n"
#~ "  unless the -s|--skipexisting command line option is also used.\n"
#~ "            \n"
#~ "  $ pkprinters --delete \"*\"\n"
#~ "  \n"
#~ "  This will completely delete all printers and associated quota "
#~ "information,\n"
#~ "  as well as their job history. USE WITH CARE !\n"
#~ "  \n"
#~ "  $ pkprinters --groups Laser,HP \"hp*\"\n"
#~ "  \n"
#~ "  This will put all printers which name matches \"hp*\" into printers "
#~ "groups \n"
#~ "  Laser and HP, which MUST already exist.\n"
#~ "  \n"
#~ "  $ pkprinters --groups LexMark --remove hp2200\n"
#~ "  \n"
#~ "  This will remove the hp2200 printer from the LexMark printer group.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pkprinters v%s (c) %s %s\n"
#~ "\n"
#~ "Ein Druckermanager f�ota.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  pkprinters [Optionen] Drucker1 Drucker2 Drucker3 ... DruckerN\n"
#~ "\n"
#~ "Optionen:\n"
#~ "\n"
#~ "  -v | --version       Gibt die Versionsnummer von pkprinters aus und "
#~ "endet.\n"
#~ "  -h | --help          Gibt diese Nachricht aus und endet.\n"
#~ "\n"
#~ "  -a | --add           F�ucker hinzu, wenn sie in der "
#~ "Kontingentverwaltung\n"
#~ "                       noch nicht existieren. Wenn sie existieren, werden "
#~ "sie\n"
#~ "                       angepasst, ausser -s | --skipexisting ist auch "
#~ "gesetzt.\n"
#~ "\n"
#~ "  -d | --delete        L�t Drucker aus der Kontingentverwaltung.\n"
#~ "\n"
#~ "  -D | --description d F�n Druckern eine Beschreibung hinzu.\n"
#~ "\n"
#~ "  -c | --charge p[,j]  Setzt den Preis pro Seite und pro Auftrag fest. "
#~ "Der Preis \n"
#~ "                       pro Auftrag ist fakultativ.\n"
#~ "                       Werden beide verwendet, trennen Sie sie mit einem "
#~ "Komma ab.\n"
#~ "                       Flie�ommazahlen und negative Werte sind erlaubt.\n"
#~ "   \n"
#~ "  -g | --groups pg1[,pg2...] F�n/die Drucker der Druckergruppen "
#~ "pg1,\n"
#~ "                        pg2, etc..., die schon existieren m� hinzu.\n"
#~ "                        Eine Druckergruppe ist wie ein normaler Drucker,\n"
#~ "                        bloss kennt man ihn �erweise im\n"
#~ "                        Drucksystem nicht. Richten Sie Druckergruppen "
#~ "genau\n"
#~ "                        gleich wie Drucker ein, dann f�ie andere\n"
#~ "                        Drucker mit dieser Option hinzu.\n"
#~ "                        Die Kontof� wird f�en Drucker und f�~ "alle\n"
#~ "                        Druckergruppen, denen er angeh� gemacht,\n"
#~ "                        die Kontingent��wird f� Drucker\n"
#~ "                        und f�e Druckergruppen, zu denen er geh�\n"
#~ "                        gemacht.\n"
#~ "                        Wenn die Option --remove (siehe weiter unten) "
#~ "nicht\n"
#~ "                        gesetzt ist, so werden standardm�ig Drucker "
#~ "der\n"
#~ "                        angegebenen Druckergruppe hinzugef�"
#~ "\n"
#~ "  -l | --list           Gibt Informationen �en/die Drucker und die\n"
#~ "                        Druckergruppen, denen er angeh� aus.\n"
#~ "\n"
#~ "  -r | --remove         In Kombination mit der obigen Option --groups "
#~ "werden\n"
#~ "                        Drucker aus der angegebenen Druckergruppe "
#~ "entfernt.\n"
#~ "\n"
#~ "  -s | --skipexisting   In Kombination mit der obigen Option --add "
#~ "verhindert\n"
#~ "                        dies, dass pkprinters existierende Drucker "
#~ "ver�ert.\n"
#~ "\n"
#~ "  Drucker1 bis DruckerN kann Platzhalter enthalten, wenn die Option --"
#~ "add\n"
#~ "  nicht gesetzt ist.\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 "
#~ "hp8000\n"
#~ "\n"
#~ "  Dies richtet drei Drucker mit Namen hp2100, hp2200 und hp8000 ein.\n"
#~ "  Die Seitenkosten f�se Drucker ist auf 0.05 Einheiten festgelegt "
#~ "und\n"
#~ "  ihr Preis pro Auftrag auf 0.01 Einheiten. Einheiten k�n Ihrer "
#~ "W�ung\n"
#~ "  entsprechen oder was immer Sie unter ihnen verstehen wollen.\n"
#~ "  Die Beschreibung aller Drucker ist auf die Zeichenkette \"HP Printer\"\n"
#~ "  gesetzt. Wenn irgendeiner dieser Drucker schon existiert, wird er\n"
#~ "  modifiziert, ausser die Option -s | --skipexisting ist auch gesetzt.\n"
#~ "\n"
#~ "  $ pkprinters --delete \"*\"\n"
#~ "\n"
#~ "  Dies l�t alle Drucker und dazugeh�en Kontingentinformationen\n"
#~ "  vollst�ig, ebenso die Liste der Druckauftr�. VORSICHT!\n"
#~ "\n"
#~ "  $ pkprinters --groups Laser,HP \"hp*\"\n"
#~ "\n"
#~ "  Dies f�le Drucker, deren Namen zu \"hp*\" passen, den "
#~ "Druckergruppen\n"
#~ "  Laser und HP, die schon VORHANDEN SEIN M�SEN, hinzu.\n"
#~ "\n"
#~ "  $ pkprinters --groups LexMark --remove hp2200\n"
#~ "\n"
#~ "  Dies entfernt den Drucker hp2200 aus der Druckergruppe LexMark.<\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "pykosd v%s (c) %s %s\n"
#~ "\n"
#~ "An OSD quota monitor for PyKota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pykosd [options]\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pykosd's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -c | --color #rrggbb Sets the color to use for display as an "
#~ "hexadecimal\n"
#~ "                       triplet, for example #FF0000 is 100%% red.\n"
#~ "                       Defaults to 100%% green (#00FF00).\n"
#~ "                       \n"
#~ "  -d | --duration d    Sets the duration of the display in seconds. \n"
#~ "                       Defaults to 3 seconds.\n"
#~ "                       \n"
#~ "  -f | --font f        Sets the font to use for "
#~ "display.                      \n"
#~ "                       Defaults to the Python OSD library's default.\n"
#~ "  \n"
#~ "  -l | --loop n        Sets the number of times the info will be "
#~ "displayed.\n"
#~ "                       Defaults to 0, which means loop forever.\n"
#~ "                       \n"
#~ "  -s | --sleep s       Sets the sleeping duration between two displays \n"
#~ "                       in seconds. Defaults to 180 seconds (3 minutes).\n"
#~ "                       \n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pykosd -s 60 --loop 5\n"
#~ "  \n"
#~ "  Will launch pykosd. Display will be refreshed every 60 seconds,\n"
#~ "  and will last for 3 seconds (the default) each time. After five\n"
#~ "  iterations, the program will exit.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pykosd v%s (c) %s %s\n"
#~ "\n"
#~ "Ein OSD Kontingent-Anzeiger f�ota.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  pykosd [Optionen]\n"
#~ "\n"
#~ "Optionen:\n"
#~ "\n"
#~ "   -v | --version       Gibt die Versionsnummer von pykosd aus und "
#~ "endet.\n"
#~ "   -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "\n"
#~ "   -c | --color #rrggbb Stellt die Farbe f� Anzeige in Form eines\n"
#~ "                        hexadezimalen Triplets ein; zum Beipiel: #FF0000 "
#~ "ist 100%% rot.\n"
#~ "                        Standard ist 100%% gr�0FF00).\n"
#~ "\n"
#~ "   -d | --duration d    Stellt die Dauer der Anzeige in Sekunden ein.\n"
#~ "                        Standard ist 3 Sekunden.\n"
#~ "\n"
#~ "   -f | --font f        Stellt die Schriftart f� Anzeige ein.\n"
#~ "                        Standard ist der Standard der Python OSD "
#~ "Bibliothek.\n"
#~ "\n"
#~ "   -l | --loop n        Stellt ein, wie oft die Information angezeigt "
#~ "wird.\n"
#~ "                        Standard ist 0, das hei� immer.\n"
#~ "\n"
#~ "   -s | --sleep s       Stellt die Schlafdauer zwischen zwei Anzeigen in\n"
#~ "                        Sekunden ein.\n"
#~ "                        Standard ist 180 Sekunden (3 Minuten).\n"
#~ "\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ pykosd -s 60 --loop 5\n"
#~ "\n"
#~ "  Startet pykosd. Die Anzeige wird alle 60 Sekunden erneuert und dauert\n"
#~ "  jedes Mal 3 Sekunden (der Standardwert). Nach f�rchl�en endet\n"
#~ "  das Programm.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "pykotme v%s (c) %s %s\n"
#~ "\n"
#~ "Gives print quotes to users.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  pykotme  [options]  [files]\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints pykotme's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -P | --printer p     Gives a quote for this printer only. Actually p "
#~ "can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers.\n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ pykotme --printer apple file1.ps file2.ps\n"
#~ "  \n"
#~ "  This will give a print quote to the current user. The quote will show\n"
#~ "  the price and size of a job consisting in file1.ps and file2.ps \n"
#~ "  which would be sent to the apple printer.\n"
#~ "  \n"
#~ "  $ pykotme --printer apple,hplaser <file1.ps\n"
#~ "  \n"
#~ "  This will give a print quote to the current user. The quote will show\n"
#~ "  the price and size of a job consisting in file1.ps as read from\n"
#~ "  standard input, which would be sent to the apple or hplaser\n"
#~ "  printer.\n"
#~ "\n"
#~ "  $ pykotme \n"
#~ "  \n"
#~ "  This will give a quote for a job consisting of what is on standard \n"
#~ "  input. The quote will list the job size, and the price the job\n"
#~ "  would cost on each printer.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "pykotme v%s (c) %s %s\n"
#~ "\n"
#~ "Gibt den Benutzern ihre Druckkontingente an.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  pykotme  [Optionen]  [Dateien]\n"
#~ "\n"
#~ "  -v | --version       Gibt die Versionsnummer von pyktome aus und "
#~ "endet.\n"
#~ "  -h | --help          Gibt diese Nachricht aus und endet.\n"
#~ "\n"
#~ "  -P | --printer p     Zeigt ein Kontingent ausschliesslich f�sen "
#~ "Drucker an.\n"
#~ "                       p kann Platzhalter enthalten um nur einige "
#~ "Drucker\n"
#~ "                       auszuw�en. Standardwert ist *, d.h. alle "
#~ "Drucker.\n"
#~ "                       Sie k�n verschiedene Namen oder Platzhalter,\n"
#~ "                       durch Kommas getrennt, angeben.\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ pykotme --printer apple Datei1.ps Datei2.ps\n"
#~ "\n"
#~ "  Dies gibt ein Druckkontingent f� aktuellen Benutzer an. Das "
#~ "Kontingent\n"
#~ "  wird mit dem Preis und der Gr�eines Auftrags auf Basis von Datei1."
#~ "ps\n"
#~ "  und Datei2.ps angegeben, wenn sie an den Drucker apple gesendet "
#~ "w�\n"
#~ "\n"
#~ "  $ pykotme --printer apple,hplaser <Datei1.ps\n"
#~ "\n"
#~ "  Dies gibt ein Druckkontingent f� aktuellen Benutzer an. Das "
#~ "Kontingent\n"
#~ "  wird mit dem Preis und der Gr�eines Auftrags auf Basis von Datei1."
#~ "ps,\n"
#~ "  angegeben, so wie sie vom Standard Input her gelesen wird, wenn sie "
#~ "an \n"
#~ "  den Drucker apple oder hplaser gesendet w�n"
#~ "\n"
#~ "  $ pykotme\n"
#~ "\n"
#~ "  Dies gibt ein Kontingent f�en Auftrag an, der aus dem besteht, "
#~ "was\n"
#~ "  via Standard Input ankommt. Das Kontingent zeigt die Gr�des "
#~ "Auftrags\n"
#~ "  und den Preis, den der Auftrag auf jedem Drucker kosten w�n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "repykota v%s (c) %s %s\n"
#~ "\n"
#~ "Generates print quota reports.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  repykota [options] \n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints repykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -u | --users         Generates a report on users quota, this is \n"
#~ "                       the default.\n"
#~ "  \n"
#~ "  -g | --groups        Generates a report on group quota instead of "
#~ "users.\n"
#~ "  \n"
#~ "  -P | --printer p     Report quotas on this printer only. Actually p "
#~ "can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers.\n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ repykota --printer lp\n"
#~ "  \n"
#~ "  This will print the quota status for all users who use the lp printer.\n"
#~ "\n"
#~ "  $ repykota \n"
#~ "  \n"
#~ "  This will print the quota status for all users on all printers.\n"
#~ "  \n"
#~ "  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
#~ "  \n"
#~ "  This will print the quota status for user jerome and all users\n"
#~ "  whose name begins with \"jo\" on all printers which name begins\n"
#~ "  with \"laser\" or ends with \"pson\".\n"
#~ "  \n"
#~ "  If launched by an user who is not a PyKota administrator, additionnal\n"
#~ "  arguments representing users or groups names are ignored, and only the\n"
#~ "  current user/group is reported.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "repykota v%s (c) %s %s\n"
#~ "\n"
#~ "Erzeugt Berichte zu den Druckkontingenten.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  repykota [Optionen]\n"
#~ "\n"
#~ "  -v | --version       Gibt die Versionsnummer von repykota aus und "
#~ "endet.\n"
#~ "  -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "\n"
#~ "  -u | --users         Erzeugt einen Bericht �ie Kontigente der "
#~ "Benutzer.\n"
#~ "                       Dies ist der Standard.\n"
#~ "\n"
#~ "  -g | --groups        Erzeugt einen Bericht �ie Kontingente der "
#~ "Gruppe\n"
#~ "                       anstelle der Benutzer.\n"
#~ "\n"
#~ "  -P | --printer p     Druckkontingent nur f�sen Drucker ausgeben.\n"
#~ "                       p kann Platzhalter enthalten um nur einige "
#~ "Drucker\n"
#~ "                       auszuw�en. Der Standardwert ist *, d.h. alle\n"
#~ "                       Drucker.\n"
#~ "                       Sie k�n verschiedene Namen oder Platzhalter "
#~ "angeben,\n"
#~ "                       die Sie mit Kommas abtrennen.\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ repykota --printer lp\n"
#~ "\n"
#~ "  Dies gibt den Stand der Kontingente aller Benutzer aus, die den\n"
#~ "  Drucker lp benutzen.\n"
#~ "\n"
#~ "  $ repykota\n"
#~ "\n"
#~ "  Dies gibt den Stand der Kontingente f�e Benutzer auf allen "
#~ "Druckern aus.\n"
#~ "\n"
#~ "  $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n"
#~ "\n"
#~ "  Dies gibt den Stand der Kontingente f� Benutzer jerome und f�~ "alle\n"
#~ "  Benutzer aus, deren Namen mit \"jo\" beginnt, auf allen Druckern, deren "
#~ "Namen\n"
#~ "  mit \"laser\" beginnt oder mit \"pson\" endet.\n"
#~ "\n"
#~ "  Wenn das Programm von einem Benutzer aufgerufen wird, der kein\n"
#~ "  PyKota-Administrator ist, so werden die zus�lichen Optionen f�~ "Benutzer\n"
#~ "  oder Gruppen ignoriert und nur die Daten des aktuellen Benutzers/"
#~ "Gruppe\n"
#~ "  ausgegeben.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "warnpykota v%s (c) %s %s\n"
#~ "\n"
#~ "Sends mail to users over print quota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  warnpykota  [options]  [names]\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints warnpykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -u | --users         Warns users over their print quota, this is the \n"
#~ "                       default.\n"
#~ "  \n"
#~ "  -g | --groups        Warns users whose groups quota are over limit.\n"
#~ "  \n"
#~ "  -P | --printer p     Verify quotas on this printer only. Actually p "
#~ "can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers.\n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ warnpykota --printer lp\n"
#~ "  \n"
#~ "  This will warn all users of the lp printer who have exceeded their\n"
#~ "  print quota.\n"
#~ "\n"
#~ "  $ warnpykota \n"
#~ "  \n"
#~ "  This will warn all users  who have exceeded their print quota on\n"
#~ "  any printer.\n"
#~ "\n"
#~ "  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
#~ "  \n"
#~ "  This will warn all users of groups which names begins with \"dev\" and\n"
#~ "  who have exceeded their print quota on any printer which name begins \n"
#~ "  with \"laserjet\"\n"
#~ "  \n"
#~ "  If launched by an user who is not a PyKota administrator, additionnal\n"
#~ "  arguments representing users or groups names are ignored, and only the\n"
#~ "  current user/group is reported.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "warnpykota v%s (c) %s %s\n"
#~ "\n"
#~ "Sendet Post an die Benutzer bez� Druckkontingente.\n"
#~ "\n"
#~ "Befehlszeilen-Gebrauch:\n"
#~ "\n"
#~ "  warnpykota  [Optionen]  [Namen]\n"
#~ "\n"
#~ "Optionen:\n"
#~ "\n"
#~ "  -v | --version       Gibt die Version von warnpykota aus und endet.\n"
#~ "  -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "\n"
#~ "  -u | --users         Warnt die Benutzer bez� ihres "
#~ "Druckkontingents.\n"
#~ "                       Das ist der Standard.\n"
#~ "\n"
#~ "  -g | --groups        Warnt die Benutzer, deren Gruppen �em Limit "
#~ "sind.\n"
#~ "\n"
#~ "  -P | --printer p     Verfiziert die Kontingente allein f�sen "
#~ "Drucker.\n"
#~ "                       p kann Platzhalter enthalten um nur einige "
#~ "Drucker\n"
#~ "                       auszuw�en. Standardwert ist *, d.h. alle "
#~ "Drucker.\n"
#~ "                       Sie k�n verschiedene Namen und Platzhalter "
#~ "angeben,\n"
#~ "                       die Sie mit Kommas abtrennen m�\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ warnpykota --printer lp\n"
#~ "\n"
#~ "  Dies warnt alle Benutzer des Druckers lp, die ihr Druckkontingent\n"
#~ "  �hritten haben.\n"
#~ "\n"
#~ "  $ warnpykota\n"
#~ "\n"
#~ "  Dies warnt alle Benutzer, die Ihr Druckkontingent auf irgendeinem\n"
#~ "  Drucker �hritten haben.\n"
#~ "\n"
#~ "  $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n"
#~ "\n"
#~ "  Dies warnt alle Benutzer der Gruppen, deren Namen mit \"dev\" beginnen "
#~ "und\n"
#~ "  die ihr Druckkontingent auf irgendeinem Drucker, dessen Name mit\n"
#~ "  \"laserjet\" beginnt.\n"
#~ "\n"
#~ "  Wenn das Programm von einem Benutzer aufgerufen wird, der nicht ein\n"
#~ "  Pykota-Administrator ist, werden die Optionen f�utzer- und \n"
#~ "  Gruppennamen ignoriert und nur der aktuelle Benutzer/Gruppe angezeigt.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "Internal SNMP accounting asked, but Python-SNMP is not available. Please "
#~ "download it from http://pysnmp.sourceforge.net"
#~ msgstr ""
#~ "Internes SNMP-Accounting verlangt, doch Python-SNMP ist nicht verf� "
#~ "Bitte laden Sie es herunter von http://pysnmp.sourceforge.net"

#~ msgid ""
#~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
#~ "Libres\n"
#~ "\n"
#~ "Dumps PyKota database's content.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  dumpykota [options] \n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints dumpykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -d | --data type     Dumps 'type' datas. Allowed types are :\n"
#~ "                       \n"
#~ "                         - history : dumps the jobs history.\n"
#~ "                         - users : dumps users.\n"
#~ "                         - groups : dumps user groups.\n"
#~ "                         - printers : dump printers.\n"
#~ "                         - upquotas : dump user quotas.\n"
#~ "                         - gpquotas : dump user groups quotas.\n"
#~ "                         - payments : dumps user payments.\n"
#~ "                         - pmembers : dumps printer groups members.\n"
#~ "                         - umembers : dumps user groups members.\n"
#~ "                         \n"
#~ "                       NB : the -d | --data command line option   \n"
#~ "                       is MANDATORY.\n"
#~ "  \n"
#~ "  -f | --format fmt    Dumps datas in the 'fmt' format. When not "
#~ "specified,\n"
#~ "                       the format is to dump datas in the csv format "
#~ "(comma\n"
#~ "                       separated values). All data dumped is between "
#~ "double\n"
#~ "                       quotes. Allowed formats are :\n"
#~ "                       \n"
#~ "                         - csv : separate datas with commas\n"
#~ "                         - ssv : separate datas with semicolons\n"
#~ "                         - tsv : separate datas with tabs\n"
#~ "                         - xml : dump data as XML\n"
#~ "                         \n"
#~ "  -o | --output fname  All datas will be dumped to the file instead of\n"
#~ "                       to the standard output. The special '-' filename\n"
#~ "                       is the default value and means stdout.\n"
#~ "                       WARNING : existing files are truncated !\n"
#~ "  \n"
#~ "Examples :\n"
#~ "\n"
#~ "  $ dumpykota --data history --format csv >myfile.csv\n"
#~ "  \n"
#~ "  This dumps the history in a comma separated values file, for possible\n"
#~ "  use in a spreadsheet.\n"
#~ "  \n"
#~ "  $ dumpykota --data users --format xml -o users.xml\n"
#~ "  \n"
#~ "  Dumps all users datas to the users.xml file.\n"
#~ "  \n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
#~ "Libres\n"
#~ "\n"
#~ "Erzeugt einen Auszug (Dump) des Inhalts der Pykota-Datenbank.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  dumpykota [Optionen]\n"
#~ "\n"
#~ "Optionen:\n"
#~ "\n"
#~ "  -v | --version       Gibt die Versionsnummer von dumpykota aus und "
#~ "endet.\n"
#~ "  -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "\n"
#~ "  -d | --data type     Gibt Daten vom Typ 'type' aus. Erlaubte Typen "
#~ "sind:\n"
#~ "\n"
#~ "                         - history:  Gibt die Liste der Auftr� aus.\n"
#~ "                         - users:    Gibt die Benutzer aus.\n"
#~ "                         - groups:   Gibt die Gruppen aus.\n"
#~ "                         - printers: Gibt die Drucker aus.\n"
#~ "                         - upquotas: Gibt die Benutzerkontingente aus.\n"
#~ "                         - gpquotas: Gibt die Gruppenkontingente aus.\n"
#~ "                         - payments: Gibt die Zahlungen der Benutzer "
#~ "aus.\n"
#~ "                         - pmembers: Gibt die Mitglieder der "
#~ "Druckergruppen aus.\n"
#~ "                         - umembers: Gibt die Mitglieder der "
#~ "Benutzergruppen aus.\n"
#~ "                           \n"
#~ "                         N.B.: die Kommandozeilenoption -d | --data\n"
#~ "                         ist VERPFLICHTEND.\n"
#~ "\n"
#~ "  -f | --format fmt    Gibt die Daten im Format 'fmt' aus. Wenn nichts "
#~ "anderes angegeben\n"
#~ "                       werden die Daten im csv (comma separated values = "
#~ "Die Werte\n"
#~ "                       sind durch Kommas getrennt) ausgegeben. Alle "
#~ "ausgegebenen Daten\n"
#~ "                       erscheinen zwischen doppelten G�ef�n. "
#~ "Erlaubte Formate\n"
#~ "                       sind:\n"
#~ "\n"
#~ "                        - csv: trennt Daten durch Kommas\n"
#~ "                        - ssv: trennt Daten durch Strichpunkte\n"
#~ "                        - tsv: trennt Daten durch Tabulatorenspr�"
#~ "                        - xml: gibt die Daten als XML aus\n"
#~ "\n"
#~ "  -o | --output fname  Alle Daten werden in eine Datei statt in die "
#~ "Standardausgabe\n"
#~ "                       geschrieben. Der spezielle Dateiname '-' ist der "
#~ "Standardwert\n"
#~ "                       und bezeichnet stdout.\n"
#~ "                       ACHTUNG: Existierende Dateien werden "
#~ "�hrieben.\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "\n"
#~ "  $ dumpykota --data history --format csv >myfile.csv\n"
#~ "\n"
#~ "  Dies schreibt die Liste der Auftr� in eine Datei, in der die Daten "
#~ "durch Kommas\n"
#~ "  getrennt sind, zum m�chen Gebrauch in einer Tabellenverarbeitung.\n"
#~ "\n"
#~ "  $ dumpykota --data users --format xml -o users.xml\n"
#~ "\n"
#~ "  Gibt alle Daten der Nutzer in die Datei users.xml aus.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid "Too many arguments, see help."
#~ msgstr "Zu viele Argumente, siehe Hilfe."

#~ msgid ""
#~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
#~ "Libres\n"
#~ "A Print Quota editor for PyKota.\n"
#~ "\n"
#~ "command line usage :\n"
#~ "\n"
#~ "  edpykota [options] user1 user2 ... userN\n"
#~ "  \n"
#~ "  edpykota [options] group1 group2 ... groupN\n"
#~ "\n"
#~ "options :\n"
#~ "\n"
#~ "  -v | --version       Prints edpykota's version number then exits.\n"
#~ "  -h | --help          Prints this message then exits.\n"
#~ "  \n"
#~ "  -a | --add           Adds users and/or printers if they don't \n"
#~ "                       exist on the Quota Storage Server.\n"
#~ "                       \n"
#~ "  -d | --delete        Deletes users/groups from the quota storage.\n"
#~ "                       Printers are never deleted.\n"
#~ "                       \n"
#~ "  -c | --charge p[,j]  Sets the price per page and per job to charge\n"
#~ "                       for a particular printer. Job price is optional.\n"
#~ "                       If both are to be set, separate them with a "
#~ "comma.\n"
#~ "                       Floating point values are allowed.\n"
#~ "  \n"
#~ "  -i | --ingroups g1[,g2...]  Puts the users into each of the groups\n"
#~ "                              listed, separated by commas. The groups\n"
#~ "                              must already exist in the Quota Storage.\n"
#~ "  \n"
#~ "  -u | --users         Edit users print quotas, this is the default.\n"
#~ "  \n"
#~ "  -P | --printer p     Edit quotas on printer p only. Actually p can\n"
#~ "                       use wildcards characters to select only\n"
#~ "                       some printers. The default value is *, meaning\n"
#~ "                       all printers. \n"
#~ "                       You can specify several names or wildcards, \n"
#~ "                       by separating them with commas.\n"
#~ "  \n"
#~ "  -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n"
#~ "                       pg1, pg2, etc... which must already exist.\n"
#~ "                       A printer group is just like a normal printer,\n"
#~ "                       only that it is usually unknown from the printing\n"
#~ "                       system. Create printer groups exactly the same\n"
#~ "                       way that you create printers, then add other \n"
#~ "                       printers to them with this option.\n"
#~ "                       Accounting is done on a printer and on all\n"
#~ "                       the printer groups it belongs to, quota checking\n"
#~ "                       is done on a printer and on all the printer "
#~ "groups\n"
#~ "                       it belongs to.\n"
#~ "  \n"
#~ "  -g | --groups        Edit users groups print quotas instead of users.\n"
#~ "                          \n"
#~ "  -p | --prototype u|g Uses user u or group g as a prototype to set\n"
#~ "                       print quotas\n"
#~ "                       \n"
#~ "  -n | --noquota       Doesn't set a quota but only does accounting.\n"
#~ "  \n"
#~ "  -r | --reset         Resets the actual page counter for the user\n"
#~ "                       or group to zero on the specified printers. \n"
#~ "                       The life time page counter is kept unchanged.\n"
#~ "                       \n"
#~ "  -R | --hardreset     Resets the actual and life time page counters\n"
#~ "                       for the user or group to zero on the specified \n"
#~ "                       printers. \n"
#~ "                       \n"
#~ "  -l | --limitby l     Choose if the user/group is limited in "
#~ "printing                     \n"
#~ "                       by its account balance or by its page quota.\n"
#~ "                       The default value is 'quota'. Allowed values\n"
#~ "                       are 'quota' 'balance' 'quota-then-balance' and\n"
#~ "                       'balance-then-quota'.\n"
#~ "                       WARNING : quota-then-balance and balance-then-"
#~ "quota\n"
#~ "                       are not yet implemented.\n"
#~ "                       \n"
#~ "  -b | --balance b     Sets the user's account balance to "
#~ "b.                     \n"
#~ "                       Account balance may be increase or decreased\n"
#~ "                       if b is prefixed with + or -.\n"
#~ "                       WARNING : when decreasing account balance,\n"
#~ "                       the total paid so far by the user is decreased\n"
#~ "                       too.\n"
#~ "                       Groups don't have a real balance, but the\n"
#~ "                       sum of their users' account balance.\n"
#~ "                       \n"
#~ "  -S | --softlimit sl  Sets the quota soft limit to sl "
#~ "pages.                       \n"
#~ "  \n"
#~ "  -H | --hardlimit hl  Sets the quota hard limit to hl pages.\n"
#~ "  \n"
#~ "  user1 through userN and group1 through groupN can use wildcards\n"
#~ "  if the --add option is not set.\n"
#~ "  \n"
#~ "examples :                              \n"
#~ "\n"
#~ "  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
#~ "  \n"
#~ "  This will add users john, paul, george and ringo to the quota\n"
#~ "  database, and set their print quotas to the same values than user \n"
#~ "  jerome. User jerome must already exist.\n"
#~ "  User ringo's email address will also be set to 'ringo@example.com'\n"
#~ "  \n"
#~ "  $ edpykota --printer lp -S 50 -H 60 jerome\n"
#~ "  \n"
#~ "  This will set jerome's print quota on the lp printer to a soft limit\n"
#~ "  of 50 pages, and a hard limit of 60 pages. If either user jerome or\n"
#~ "  printer lp doesn't exist on the Quota Storage Server then nothing is "
#~ "done.\n"
#~ "\n"
#~ "  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
#~ "  \n"
#~ "  Same as above, but if either user jerome or printer lp doesn't exist \n"
#~ "  on the Quota Storage Server they are automatically added. Also\n"
#~ "  user jerome is put into the groups \"coders\" and \"it\" which must\n"
#~ "  already exist in the Quota Storage.\n"
#~ "            \n"
#~ "  $ edpykota -g -S 500 -H 550 financial support            \n"
#~ "  \n"
#~ "  This will set print quota soft limit to 500 pages and hard limit\n"
#~ "  to 550 pages for groups financial and support on all printers.\n"
#~ "  \n"
#~ "  $ edpykota --reset jerome \"jo*\"\n"
#~ "  \n"
#~ "  This will reset jerome's page counter to zero on all printers, as\n"
#~ "  well as every user whose name begins with 'jo'.\n"
#~ "  Their life time page counter on each printer will be kept unchanged.\n"
#~ "  You can also reset the life time page counters by using the\n"
#~ "  --hardreset | -R command line option.\n"
#~ "  \n"
#~ "  $ edpykota --printer hpcolor --noquota jerome\n"
#~ "  \n"
#~ "  This will tell PyKota to not limit jerome when printing on the \n"
#~ "  hpcolor printer. All his jobs will be allowed on this printer, but \n"
#~ "  accounting of the pages he prints will still be kept.\n"
#~ "  Print Quotas for jerome on other printers are unchanged.\n"
#~ "  \n"
#~ "  $ edpykota --limitby balance jerome\n"
#~ "  \n"
#~ "  This will tell PyKota to limit jerome by his account's balance\n"
#~ "  when printing.\n"
#~ "  \n"
#~ "  $ edpykota --balance +10.0 jerome\n"
#~ "  \n"
#~ "  This will increase jerome's account balance by 10.0 (in your\n"
#~ "  own currency). You can decrease the account balance with a\n"
#~ "  dash prefix, and set it to a fixed amount with no prefix.\n"
#~ "  \n"
#~ "  $ edpykota --delete jerome rachel\n"
#~ "  \n"
#~ "  This will completely delete jerome and rachel from the Quota Storage\n"
#~ "  database. All their quotas and jobs will be deleted too.\n"
#~ "  \n"
#~ "  $ edpykota --printer lp --charge 0.1\n"
#~ "  \n"
#~ "  This will set the page price for printer lp to 0.1. Job price\n"
#~ "  will not be changed.\n"
#~ "  \n"
#~ "  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
#~ "  \n"
#~ "  This will put printers hplj1 and hplj2 in printers groups Laser and "
#~ "HP.\n"
#~ "  When printing either on hplj1 or hplj2, print quota will also be \n"
#~ "  checked and accounted for on virtual printers Laser and HP.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Please e-mail bugs to: %s"
#~ msgstr ""
#~ "edpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels "
#~ "Libres\n"
#~ "Ein Druckkontingent-Editor f�ota.\n"
#~ "\n"
#~ "Kommandozeilen-Gebrauch:\n"
#~ "\n"
#~ "  edpykota [options] benutzer1 benutzer2 ... benutzerN\n"
#~ "  \n"
#~ "  edpykota [options] gruppe1 gruppe2 ... gruppeN\n"
#~ "\n"
#~ "Optionen:\n"
#~ "\n"
#~ "   -v | --version       Gibt die Versionsnummer von edpykota aus und "
#~ "endet.\n"
#~ "   -h | --help          Gibt diese Meldung aus und endet.\n"
#~ "   \n"
#~ "   -a | --add           F�ue Benutzer und/oder Drucker hinzu, wenn "
#~ "sie \n"
#~ "                        noch nicht in der Datenbank der "
#~ "Kontigentverwaltung\n"
#~ "                        vorhanden sind.\n"
#~ "                        \n"
#~ "   -d | --delete        L�t Benutzer/Gruppen aus der "
#~ "Kontigentverwaltung.\n"
#~ "                        Drucker werden nie gel�t.\n"
#~ "                        \n"
#~ "   -c | --charge p[,j]  Setzt den Preis pro Seite und pro Auftrag fest, "
#~ "der \n"
#~ "                        f� betreffenden Drucker festgesetzt ist. Der "
#~ "Preis \n"
#~ "                        pro Auftrag ist fakultativ. Werden beide "
#~ "verwendet, \n"
#~ "                        trennen Sie sie mit einem Komma ab.\n"
#~ "                        Flie�ommazahlen sind erlaubt.\n"
#~ "   \n"
#~ "   -i | --ingroups g1[,g2...] F�n Benutzer in jede der aufgef�\n"
#~ "                              Gruppen ein, Trennung mit Kommas. Die "
#~ "Gruppen\n"
#~ "                              m�schon in der Kontingentverwaltung "
#~ "existieren.\n"
#~ "   \n"
#~ "   -u | --users         Editiert das Kontingent f� Benutzer, dies "
#~ "ist der Standard.\n"
#~ "   \n"
#~ "   -P | --printer p     Editiert das Kontingent nur auf dem Drucker p. p "
#~ "kann aber\n"
#~ "                        Platzhalter-Zeichen enthalten, um nur einige "
#~ "Drucker\n"
#~ "                        auszuw�en. Der Standardwert ist *, das heisst "
#~ "alle\n"
#~ "                        Drucker\n"
#~ "                        Sie k�n verschiedene Namen oder Platzhalter,\n"
#~ "                        getrennt durch Kommas, angeben.\n"
#~ "   \n"
#~ "   -G | --pgroups pg1[,pg2...] F�n/die Drucker der Druckergruppen "
#~ "pg1,\n"
#~ "                        pg2, etc..., die schon existieren m� hinzu.\n"
#~ "                        Eine Druckergruppe ist wie ein normaler Drucker,\n"
#~ "                        bloss kennt man ihn �erweise nicht im\n"
#~ "                        Drucksystem. Richten Sie Druckergruppen genau\n"
#~ "                        gleich wie Drucker ein, dann f�ie andere\n"
#~ "                        Drucker mit dieser Option dazu.\n"
#~ "                        Die Kontof� wird f�en Drucker und f�~ "alle\n"
#~ "                        Druckergruppen, denen er angeh� gemacht,\n"
#~ "                        die Kontingent��wird f� Drucker\n"
#~ "                        und f�e Druckergruppen, zu denen er geh�\n"
#~ "                        gemacht.\n"
#~ "  \n"
#~ "   -g | --groups        Editiert Benutzergruppen-Kontingente anstelle "
#~ "von\n"
#~ "                        Einzelbenutzern.\n"
#~ "\n"
#~ "   -p | --prototype u|g Setzt Benutzer u oder Gruppe g als Vorlage, um\n"
#~ "                        Druckkontingente zu setzen.\n"
#~ "\n"
#~ "   -n | --noquota       Setzt keine Kontingentsbeschr�ung, sondern\n"
#~ "                        macht bloss die Kontof�.\n"
#~ "\n"
#~ "   -r | --reset         Setzt den aktuellen Seitenz�er auf den\n"
#~ "                        angegebenen Druckern f� Benutzer oder f�#~ "                        die Gruppe auf Null zur�er lebensl�liche\n"
#~ "                        Seitenz�er bleibt unver�ert.\n"
#~ "\n"
#~ "   -R | --hardreset     Setzt den aktuellen und den lebensl�lichen\n"
#~ "                        Seitenz�er auf den angegebenen Druckern f�#~ "                        den Benutzer oder die Gruppe auf Null zur�"
#~ "\n"
#~ "   -l | --limitby l     Bestimmen Sie, ob der Benutzer/die Gruppe f�~ "das\n"
#~ "                        Drucken via account balance oder via "
#~ "Seitenkontingent\n"
#~ "                        limitiert wird.\n"
#~ "                        Der Standardwert ist 'quota'. Erlaubte Werte "
#~ "sind\n"
#~ "                        'quota' 'balance' 'quota-then-balance' und\n"
#~ "                        'balance-then-quota'.\n"
#~ "                        ACHTUNG: quota-then-balance und balance-then-"
#~ "quota\n"
#~ "                        sind noch nicht implementiert.\n"
#~ "\n"
#~ "   -b | --balance b     Setzt die Abrechnungsbalance f� Benutzer auf "
#~ "b.\n"
#~ "                        Die Abrechnungsbalance kann erh�oder "
#~ "vermindert\n"
#~ "                        werden, wenn b das Vorzeichen + oder - tr�.\n"
#~ "                        ACHTUNG: wenn die Abrechnungsbalance vermindert "
#~ "wird,\n"
#~ "                        wird auch die Gesamtsumme, die der Benutzer bis "
#~ "anhin\n"
#~ "                        bezahlt hat, ebenso vermindert.\n"
#~ "                        Gruppen haben keine eigentliche Balance, sondern\n"
#~ "                        die Summe der Balance ihrer Benutzer.\n"
#~ "\n"
#~ "   -S | --softlimit sl   Setzt die weiche Kontingentslimite auf sl "
#~ "Seiten.\n"
#~ "\n"
#~ "   -H | --hardlimit hl   Setzt die harte Kontingentslimita auf hl "
#~ "Seiten.\n"
#~ "\n"
#~ "   benutzer1 bis benutzerN und gruppe1 bis gruppeN k�n Platzhalter "
#~ "benutzen,\n"
#~ "   wenn die Option --add nicht gesetzt ist.\n"
#~ "\n"
#~ "Beispiele:\n"
#~ "  $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n"
#~ "  \n"
#~ "  Benutzer john, paul, george und ringo werden zur Kontingentverwaltung\n"
#~ "  hinzugef�lle ihre Druckkontingentwerte werden auf den Wert\n"
#~ "  von Benutzer jerome gesetzt. Der Benutzer jerome muss schon "
#~ "existieren.\n"
#~ "\n"
#~ "  $ edpykota --printer lp -S 50 -H 60 jerome\n"
#~ "\n"
#~ "  Dies setzt das Druckkontingent von jerome f� lp Drucker auf\n"
#~ "  eine weiche Grenze von 50 Seiten und auf eine harte Grenze von 80\n"
#~ "  Seiten. Wenn entweder der Benutzer jerome oder der Drucker lp nicht\n"
#~ "  exisitiert, wird nichts ausgef�n"
#~ "\n"
#~ "  $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n"
#~ "\n"
#~ "  Das gleiche wie oben, doch wenn entweder der Benutzer jerome oder der\n"
#~ "  Drucker lp auf der Kontingentverwaltung nicht exisitieren,\n"
#~ "  werden sie automatisch angelegt. Desgleichen wird der Benutzer jerome\n"
#~ "  in die Gruppen 'coders' und 'it' eingef�ie aber schon in der\n"
#~ "  Kontingentverwaltung existieren m�\n"
#~ "\n"
#~ "  $ edpykota -g -S 500 -H 550 financial support\n"
#~ "\n"
#~ "  Dies setzt den Gruppen 'financial' und 'support' das weiche \n"
#~ "  Druckkontingent auf 500 und das harte auf 550 Seiten f�e\n"
#~ "  Drucker.\n"
#~ "\n"
#~ "  $ edpykota --reset jerome \"jo*\"\n"
#~ "\n"
#~ "  Dies setzt den Seitenz�er f�ome auf allen Druckern auf Null\n"
#~ "  zur�benso f�e Benutzer, deren Namen mit 'jo' beginnt.\n"
#~ "  Ihre lebensl�lichen Seitenz�er auf den einzelnen Druckern bleibt\n"
#~ "  unver�ert.\n"
#~ "  Sie k�n die lebensl�lichen Seitenz�er mit der\n"
#~ "  Kommandozeilenoption --hardreset | -R zur�zen.\n"
#~ "\n"
#~ "  $ edpykota --printer hpcolor --noquota jerome\n"
#~ "\n"
#~ "  Dies weist Pykota an, jerome beim Drucken auf dem Drucker hpcolor\n"
#~ "  keine Limiten aufzuerlegen. Alle seine Auftr� auf diesen Drucker\n"
#~ "  werden zugelassen, doch die Abrechnung der Seiten bleibt.\n"
#~ "  Druckkontingente f�ome auf den anderen Druckern bleiben\n"
#~ "  unver�ert.\n"
#~ "\n"
#~ "  $ edpykota --limitby balance jerome\n"
#~ "\n"
#~ "  Das weist Pykota an, jerome beim Drucken via Konto-Balance zu\n"
#~ "  begrenzen.\n"
#~ "\n"
#~ "  $ edpykota --balance +10.0 jerome\n"
#~ "\n"
#~ "  Dies erh�den Kontostand von jerome mit 10.0 (in Ihrer W�ung).\n"
#~ "  Sie k�n den Stand mit einem Minuszeichen erniedrigen und ihn,\n"
#~ "  wenn sie kein Vorzeichen eingeben, auf einen fixen Betrag festlegen.\n"
#~ "\n"
#~ "  $ edpykota --delete jerome rachel\n"
#~ "\n"
#~ "  Dies l�t jerome und rachel komplett aus der Kontingenverwaltung.\n"
#~ "  Alle ihre Kontingenge und Auftr� werden ebenfalls gel�t.\n"
#~ "\n"
#~ "  $ edpykota --printer lp --charge 0.1\n"
#~ "\n"
#~ "  Dies setzt den Seitenpreis auf dem Drucker lp auf 0.1. Der Preis\n"
#~ "  pro Auftrag wird nicht ver�ert.\n"
#~ "\n"
#~ "  $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n"
#~ "\n"
#~ "  Dies f�e Drucker hplj1 und hlpj2 in die Druckergruppen Laser\n"
#~ "  und HP ein. Wenn entweder auf hplj1 oder hplj2 gedruckt wird, wird\n"
#~ "  das Druckkontingent ebenso f� virtuellen Drucker Laser und\n"
#~ "  HP beachtet und berechnet.\n"
#~ "\n"
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, "
#~ "USA.\n"
#~ "\n"
#~ "Melden Sie bitte Fehler an: %s"

#~ msgid ""
#~ "Group           used    soft    hard    balance grace         total       "
#~ "paid"
#~ msgstr ""
#~ "Gruppe          used    Soft    Hard    Konto   Aufschub      Gesamt   "
#~ "Bezahlt"

#~ msgid ""
#~ "User            used    soft    hard    balance grace         total       "
#~ "paid"
#~ msgstr ""
#~ "User            used    Soft    Hard    Konto   Aufschub      Gesamt   "
#~ "Bezahlt"

#~ msgid "Waiting for printer %s to be idle or printing..."
#~ msgstr "Am Warten darauf, dass Drucker %s 'idle' oder 'printing' wird..."