root / pykota / trunk / bin / edpykota @ 813

#! /usr/bin/env python

# PyKota Print Quota Editor 
#
# PyKota - Print Quotas for CUPS
#
# (c) 2003 Jerome Alet <alet@librelogiciel.com>
# You're welcome to redistribute this software under the
# terms of the GNU General Public Licence version 2.0
# or, at your option, any higher version.
#
# You can read the complete GNU GPL in the file COPYING
# which should come along with this software, or visit
# the Free Software Foundation's WEB site http://www.fsf.org
#
# $Id$
#
# $Log$
# Revision 1.20  2003/02/10 12:07:30  jalet
# Now repykota should output the recorded total page number for each printer too.
#
# Revision 1.19  2003/02/09 13:40:29  jalet
# typo
#
# Revision 1.18  2003/02/09 12:56:53  jalet
# Internationalization begins...
#
# Revision 1.17  2003/02/08 22:47:23  jalet
# Option --reset can now be used without having to use soft and hard limits
# on the command line.
#
# Revision 1.16  2003/02/08 22:39:46  jalet
# --reset command line option added
#
# Revision 1.15  2003/02/08 22:20:01  jalet
# Clarification on why we don't check with /etc/passwd to see if the user
# name is valid or not.
#
# Revision 1.14  2003/02/08 22:18:15  jalet
# Now checks user and group names for validity before adding them
#
# Revision 1.13  2003/02/08 22:09:02  jalet
# Only printer was added the first time.
#
# Revision 1.12  2003/02/08 21:44:49  jalet
# Python 2.1 string module doesn't define ascii_letters
#
# Revision 1.11  2003/02/08 09:42:44  jalet
# Better handle wrong or bad command line arguments
#
# Revision 1.10  2003/02/08 09:39:20  jalet
# typos
#
# Revision 1.9  2003/02/08 09:38:06  jalet
# Badly placed test
#
# Revision 1.8  2003/02/07 22:53:57  jalet
# Checks if printer name is valid before adding it
#
# Revision 1.7  2003/02/07 22:17:58  jalet
# Incomplete test
#
# Revision 1.6  2003/02/07 22:13:13  jalet
# Perhaps edpykota is now able to add printers !!! Oh, stupid me !
#
# Revision 1.5  2003/02/06 14:49:04  jalet
# edpykota should be ok now
#
# Revision 1.4  2003/02/06 14:28:59  jalet
# edpykota should be ok, minus some typos
#
# Revision 1.3  2003/02/06 10:47:21  jalet
# Documentation string and command line options didn't match.
#
# Revision 1.2  2003/02/06 10:39:23  jalet
# Preliminary edpykota work.
#
# Revision 1.1  2003/02/05 21:41:09  jalet
# Skeletons added for all command line tools
#
#
#

import sys

from pykota import version
from pykota.tool import PyKotaTool, PyKotaToolError

__doc__ = """edpykota v%s (C) 2003 C@LL - Conseil Internet & Logiciels Libres
A Print Quota editor for PyKota.

command line usage :

  edpykota [options] user1 user2 ... userN
  edpykota [options] group1 group2 ... groupN

options :

  -v | --version       Prints edpykota's version number then exits.
  -h | --help          Prints this message then exits.
  
  -a | --add           Adds users and/or printers if they don't 
                       exist on the Quota Storage Server.
                       
  -u | --users         Edit users print quotas, this is the default.
  
  -P | --printer p     Edit quotas on printer p only. Actually p can
                       use wildcards characters to select only
                       some printers. The default value is *, meaning
                       all printers.
  
  -g | --groups        Edit groups print quotas instead of users.
                          
  -p | --prototype u|g Uses user u or group g as a prototype to set
                       print quotas
                       
  -r | --reset         Resets the printed page counter for the user
                       or group to zero. The life time page counter 
                       is kept unchanged.
                       
  -S | --softlimit sl  Sets the quota soft limit to sl pages.                       
  
  -H | --hardlimit hl  Sets the quota hard limit to hl pages.
  
examples :                              

  $ edpykota -p jerome john paul george ringo
  
  This will set print quotas for the users john, paul, george and ringo
  to the same values than user jerome. User jerome must exist.
  
  $ edpykota --printer lp -S 50 -H 60 jerome
  
  This will set jerome's print quota on the lp printer to a soft limit
  of 50 pages, and a hard limit of 60 pages. If either user jerome or
  printer lp doesn't exist on the Quota Storage Server then nothing is done.

  $ edpykota --add --printer lp -S 50 -H 60 jerome
  
  Same as above, but if either user jerome or printer lp doesn't exist 
  on the Quota Storage Server they are automatically added. 
  WARNING : the CUPS PPD file for this printer must still be modified
            manually, as well as pykota's configuration file for a
            new printer to be managed successfully.
            
  $ edpykota -g -S 500 -H 550 financial support            
  
  This will set print quota soft limit to 500 pages and hard limit
  to 550 pages for groups financial and support on all printers.
  
  $ edpykota --reset jerome 
  
  This will reset jerome's page counter to zero on all printers. 
  His life time page counter on each printer will be kept unchanged.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.

Please e-mail bugs to: %s""" % (version.__version__, version.__author__)
        
class EdPyKota(PyKotaTool) :        
    """A class for edpykota."""
    def main(self, names, options) :
        """Edit user or group quotas."""
        printernames = self.storage.getMatchingPrinters(options["printer"])
        if not printernames :
            pname = options["printer"]
            if options["add"] and pname :
                if self.isValidName(pname) :
                    self.storage.addPrinter(pname)
                    printernames = [ (pname, 0) ]
                else :    
                    raise PyKotaToolError, _("Invalid printer name %s") % pname
            else :
                raise PyKotaToolError, _("There's no printer matching %s") % pname
        softlimit = hardlimit = None    
        if options["softlimit"] :
            try :
                softlimit = int(options["softlimit"].strip())
            except ValueError :    
                raise PyKotaToolError, _("Invalid softlimit value %s.") % options["softlimit"]
        if options["hardlimit"] :
            try :
                hardlimit = int(options["hardlimit"].strip())
            except ValueError :    
                raise PyKotaToolError, _("Invalid hardlimit value %s.") % options["hardlimit"]
        if (softlimit is not None) and (hardlimit is not None) and (hardlimit < softlimit) :        
            # error, exchange them
            self.logger.log_message(_("Hard limit %i is less than soft limit %i, values will be exchanged.") % (hardlimit, softlimit), "warn")
            (softlimit, hardlimit) = (hardlimit, softlimit)
        for (printer, printerpagecounter) in printernames :
            if options["prototype"] :
                if options["users"] :
                    prototype = self.storage.getUserPQuota(options["prototype"], printer)
                else :     
                    prototype = self.storage.getGroupPQuota(options["prototype"], printer)
                if prototype is None :
                    self.logger.log_message(_("Prototype %s not found in Quota Storage for printer %s.") % (options["prototype"], printer))
                    continue    # skip this printer
                else :    
                    (softlimit, hardlimit) = (prototype["softlimit"], prototype["hardlimit"])
            if hardlimit is None :    
                hardlimit = softlimit
                self.logger.log_message(_("Undefined hard limit set to soft limit (%s) on printer %s.") % (str(hardlimit), printer))
            if softlimit is None :    
                softlimit = hardlimit
                self.logger.log_message(_("Undefined soft limit set to hard limit (%s) on printer %s.") % (str(softlimit), printer))
            if (not options["reset"]) and ((hardlimit is None) or (softlimit is None)) :        
                raise PyKotaToolError, _("Both hard and soft limits must be set ! Aborting.")
            for name in names :
                if options["users"] :
                    quota = self.storage.getUserPQuota(name, printer)
                else :
                    quota = self.storage.getGroupPQuota(name, printer)
                if quota is None :
                    # not found
                    if options["add"] :
                        # In case we want to add something, it is crucial
                        # that we DON'T check with the system accounts files
                        # like /etc/passwd because users may be defined 
                        # only remotely
                        if options["users"] :
                            if self.isValidName(name) :
                                self.storage.addUserPQuota(name, printer)
                                quota = self.storage.getUserPQuota(name, printer)
                            else :    
                                self.logger.log_message(_("Invalid user name %s") % name)
                        else :
                            if self.isValidName(name) :
                                self.storage.addGroupPQuota(name, printer)
                                quota = self.storage.getGroupPQuota(name, printer)
                            else :    
                                self.logger.log_message(_("Invalid group name %s") % name)
                if quota is None :     
                    self.logger.log_message(_("Quota not found for object %s on printer %s.") % (name, printer))
                else :    
                    if options["users"] :
                        if (softlimit is not None) and (hardlimit is not None) :
                            self.storage.setUserPQuota(name, printer, softlimit, hardlimit)
                        if options["reset"] :
                            self.storage.resetUserPQuota(name, printer)
                    else :
                        if (softlimit is not None) and (hardlimit is not None) :
                            self.storage.setGroupPQuota(name, printer, softlimit, hardlimit)
                        if options["reset"] :
                            self.storage.resetGroupPQuota(name, printer)
                     
if __name__ == "__main__" : 
    try :
        defaults = { \
                     "users"  : 1, \
                     "groups" : 0, \
                     "printer" : "*", \
                   }
        short_options = "vhaugrp:P:S:H:"
        long_options = ["help", "version", "add", "users", "groups", "reset", "prototype=", "printer=", "softlimit=", "hardlimit="]
        
        # Initializes the command line tool
        editor = EdPyKota(doc=__doc__)
        
        # parse and checks the command line
        (options, args) = editor.parseCommandline(sys.argv[1:], short_options, long_options)
        
        # sets long options
        options["help"] = options["h"] or options["help"]
        options["version"] = options["v"] or options["version"]
        options["add"] = options["a"] or options["add"]
        options["users"] = options["u"] or options["users"] or defaults["users"]
        options["groups"] = options["g"] or options["groups"] or defaults["groups"]
        options["prototype"] = options["p"] or options["prototype"]
        options["printer"] = options["P"] or options["printer"] or defaults["printer"]
        options["softlimit"] = options["S"] or options["softlimit"]
        options["hardlimit"] = options["H"] or options["hardlimit"] 
        options["reset"] = options["r"] or options["reset"] 
        
        if options["help"] :
            editor.display_usage_and_quit()
        elif options["version"] :
            editor.display_version_and_quit()
        elif options["users"] and options["groups"] :    
            raise PyKotaToolError, _("edpykota: options --users and --groups are incompatible.")
        elif (options["softlimit"] or options["hardlimit"]) and options["prototype"] :    
            raise PyKotaToolError, _("edpykota: options --softlimit or --hardlimit and --prototype are incompatible.")
        elif options["groups"] :    
            raise PyKotaToolError, _("edpykota: option --groups is currently not implemented.")
        else :
            sys.exit(editor.main(args, options))
    except PyKotaToolError, msg :            
        sys.stderr.write("%s\n" % msg)
        sys.stderr.flush()
        sys.exit(-1)