root / pykota / trunk / bin / edpykota @ 767

#! /usr/bin/env python

# PyKota Print Quota Editor 
#
# PyKota - Print Quotas for CUPS
#
# (c) 2003 Jerome Alet <alet@librelogiciel.com>
# You're welcome to redistribute this software under the
# terms of the GNU General Public Licence version 2.0
# or, at your option, any higher version.
#
# You can read the complete GNU GPL in the file COPYING
# which should come along with this software, or visit
# the Free Software Foundation's WEB site http://www.fsf.org
#
# $Id$
#
# $Log$
# Revision 1.15  2003/02/08 22:20:01  jalet
# Clarification on why we don't check with /etc/passwd to see if the user
# name is valid or not.
#
# Revision 1.14  2003/02/08 22:18:15  jalet
# Now checks user and group names for validity before adding them
#
# Revision 1.13  2003/02/08 22:09:02  jalet
# Only printer was added the first time.
#
# Revision 1.12  2003/02/08 21:44:49  jalet
# Python 2.1 string module doesn't define ascii_letters
#
# Revision 1.11  2003/02/08 09:42:44  jalet
# Better handle wrong or bad command line arguments
#
# Revision 1.10  2003/02/08 09:39:20  jalet
# typos
#
# Revision 1.9  2003/02/08 09:38:06  jalet
# Badly placed test
#
# Revision 1.8  2003/02/07 22:53:57  jalet
# Checks if printer name is valid before adding it
#
# Revision 1.7  2003/02/07 22:17:58  jalet
# Incomplete test
#
# Revision 1.6  2003/02/07 22:13:13  jalet
# Perhaps edpykota is now able to add printers !!! Oh, stupid me !
#
# Revision 1.5  2003/02/06 14:49:04  jalet
# edpykota should be ok now
#
# Revision 1.4  2003/02/06 14:28:59  jalet
# edpykota should be ok, minus some typos
#
# Revision 1.3  2003/02/06 10:47:21  jalet
# Documentation string and command line options didn't match.
#
# Revision 1.2  2003/02/06 10:39:23  jalet
# Preliminary edpykota work.
#
# Revision 1.1  2003/02/05 21:41:09  jalet
# Skeletons added for all command line tools
#
#
#

import sys

from pykota import version
from pykota.tool import PyKotaTool, PyKotaToolError

__doc__ = """edpykota v%s (C) 2003 C@LL - Conseil Internet & Logiciels Libres
A Print Quota editor for PyKota.

command line usage :

  edpykota [options] user1 user2 ... userN
  edpykota [options] group1 group2 ... groupN

options :

  -v | --version       Prints edpykota's version number then exits.
  -h | --help          Prints this message then exits.
  
  -a | --add           Adds users and/or printers if they don't 
                       exist on the Quota Storage Server.
                       
  -u | --users         Edit users print quotas, this is the default.
  
  -P | --printer p     Edit quotas on printer p only. Actually p can
                       use wildcards characters to select only
                       some printers. The default value is *, meaning
                       all printers.
  
  -g | --groups        Edit groups print quotas instead of users.
                          
  -p | --prototype u|g Uses user u or group g as a prototype to set
                       print quotas
                       
  -S | --softlimit sl  Sets the quota soft limit to sl pages.                       
  
  -H | --hardlimit hl  Sets the quota hard limit to hl pages.
  
examples :                              

  $ edpykota -p jerome john paul george ringo
  
  This will set print quotas for the users john, paul, george and ringo
  to the same values than user jerome. User jerome must exist.
  
  $ edpykota --printer lp -S 50 -H 60 jerome
  
  This will set jerome's print quota on the lp printer to a soft limit
  of 50 pages, and a hard limit of 60 pages. If either user jerome or
  printer lp doesn't exist on the Quota Storage Server then nothing is done.

  $ edpykota --add --printer lp -S 50 -H 60 jerome
  
  Same as above, but if either user jerome or printer lp doesn't exist 
  on the Quota Storage Server they are automatically added. 
  WARNING : the CUPS PPD file for this printer must still be modified
            manually, as well as pykota's configuration file for a
            new printer to be managed successfully.
            
  $ edpykota -g -S 500 -H 550 financial support            
  
  This will set print quota soft limit to 500 pages and hard limit
  to 550 pages for groups financial and support on all printers.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.

Please e-mail bugs to: %s""" % (version.__version__, version.__author__)
        
class EdPyKota(PyKotaTool) :        
    """A class for edpykota."""
    def main(self, names, options) :
        """Edit user or group quotas."""
        printernames = self.storage.getMatchingPrinters(options["printer"])
        if not printernames :
            pname = options["printer"]
            if options["add"] and pname :
                if self.isValidName(pname) :
                    self.storage.addPrinter(pname)
                    printernames = [ pname ]
                else :    
                    raise PyKotaToolError, "Invalid printer name %s" % pname
            else :
                raise PyKotaToolError, "There's no printer matching %s" % pname
        softlimit = hardlimit = None    
        if options["softlimit"] :
            try :
                softlimit = int(options["softlimit"].strip())
            except ValueError :    
                raise PyKotaToolError, "Invalid softlimit value %s." % options["softlimit"]
        if options["hardlimit"] :
            try :
                hardlimit = int(options["hardlimit"].strip())
            except ValueError :    
                raise PyKotaToolError, "Invalid hardlimit value %s." % options["hardlimit"]
        if (softlimit is not None) and (hardlimit is not None) and (hardlimit < softlimit) :        
            # error, exchange them
            self.logger.log_message("Hard limit %i is less than soft limit %i, values will be exchanged." % (hardlimit, softlimit), "warn")
            (softlimit, hardlimit) = (hardlimit, softlimit)
        for printer in printernames :
            if options["prototype"] :
                if options["users"] :
                    prototype = self.storage.getUserPQuota(options["prototype"], printer)
                else :     
                    prototype = self.storage.getGroupPQuota(options["prototype"], printer)
                if prototype is None :
                    self.logger.log_message("Prototype %s not found in Quota Storage for printer %s." % (options["prototype"], printer))
                    continue    # skip this printer
                else :    
                    (softlimit, hardlimit) = (prototype["softlimit"], prototype["hardlimit"])
            if hardlimit is None :    
                hardlimit = softlimit
                self.logger.log_message("Undefined hard limit set to soft limit (%s) on printer %s." % (str(hardlimit), printer))
            if softlimit is None :    
                softlimit = hardlimit
                self.logger.log_message("Undefined soft limit set to hard limit (%s) on printer %s." % (str(softlimit), printer))
            if (hardlimit is None) or (softlimit is None) :        
                raise PyKotaToolError, "Both hard and soft limits must be set ! Aborting."
            for name in names :
                if options["users"] :
                    quota = self.storage.getUserPQuota(name, printer)
                else :
                    quota = self.storage.getGroupPQuota(name, printer)
                if quota is None :
                    # not found
                    if options["add"] :
                        # In case we want to add something, it is crucial
                        # that we DON'T check with the system accounts files
                        # like /etc/passwd because users may be defined 
                        # only remotely
                        if options["users"] :
                            if self.isValidName(name) :
                                self.storage.addUserPQuota(name, printer)
                                quota = self.storage.getUserPQuota(name, printer)
                            else :    
                                self.logger.log_message("Invalid user name %s" % name)
                        else :
                            if self.isValidName(name) :
                                self.storage.addGroupPQuota(name, printer)
                                quota = self.storage.getGroupPQuota(name, printer)
                            else :    
                                self.logger.log_message("Invalid group name %s" % name)
                if quota is None :     
                    self.logger.log_message("Quota not found for object %s on printer %s." % (name, printer))
                else :    
                    if options["users"] :
                        self.storage.setUserPQuota(name, printer, softlimit, hardlimit)
                    else :
                        self.storage.setGroupPQuota(name, printer, softlimit, hardlimit)
                     
if __name__ == "__main__" : 
    try :
        defaults = { \
                     "users"  : 1, \
                     "groups" : 0, \
                     "printer" : "*", \
                   }
        short_options = "vhaugp:P:S:H:"
        long_options = ["help", "version", "add", "users", "groups", "prototype=", "printer=", "softlimit=", "hardlimit="]
        
        # Initializes the command line tool
        editor = EdPyKota(doc=__doc__)
        
        # parse and checks the command line
        (options, args) = editor.parseCommandline(sys.argv[1:], short_options, long_options)
        
        # sets long options
        options["help"] = options["h"] or options["help"]
        options["version"] = options["v"] or options["version"]
        options["add"] = options["a"] or options["add"]
        options["users"] = options["u"] or options["users"] or defaults["users"]
        options["groups"] = options["g"] or options["groups"] or defaults["groups"]
        options["prototype"] = options["p"] or options["prototype"]
        options["printer"] = options["P"] or options["printer"] or defaults["printer"]
        options["softlimit"] = options["S"] or options["softlimit"]
        options["hardlimit"] = options["H"] or options["hardlimit"] 
        
        if options["help"] :
            editor.display_usage_and_quit()
        elif options["version"] :
            editor.display_version_and_quit()
        elif options["users"] and options["groups"] :    
            raise PyKotaToolError, "edpykota: options --users and --groups are incompatible."
        elif (options["softlimit"] or options["hardlimit"]) and options["prototype"] :    
            raise PyKotaToolError, "edpykota: options --softlimit or --hardlimit and --prototype are incompatible."
        elif options["groups"] :    
            raise PyKotaToolError, "edpykota: options --groups is currently not implemented."
        else :
            sys.exit(editor.main(args, options))
    except PyKotaToolError, msg :            
        sys.stderr.write("%s\n" % msg)
        sys.stderr.flush()
        sys.exit(-1)